Reassessment of Electrical and Dielectric Properties in the Borophosphate Glass System: A Promising Solid Electrolyte for High-Temperature Batteries.

This study investigates the conduction mechanism of ternary sodium borophosphate glass 30Na2O-(70 - x)B2O3-xP2O5 with 0 ≤ x ≤ 35 mol % from a different perspective, focusing on previously unreported high-temperature electrical and dielectric properties for potential solid electrolytes in high-temperature batteries. The glass composition with B2O3/P2O5 = 1 exhibits a conductivity of approximately 10-4 S/cm at 250 °C. Dielectric analysis supports this improved conduction, showing higher dielectric values and minimal energy dissipation during storage, indicating promising conductivity and favorable dielectric properties. This enhancement is attributed to the large-polaron (QMT) model, deduced from the power law exponent, due to the creation and spreading of lattice distortion of a long-range order with interconnected B4-O-P1 and B4-O-P2 linkages. Contrary to previous results, the glass transition temperature does not vary coherently with the conductivity and activation energy, displaying a discontinuity at 14 mol %. This discontinuity is caused by the initial extreme depolymerization of P2O5, leading to an increase in nonbridging oxygens (NBOs) within the glass network and forming B4-O-P0 linkages. Despite this, the ionic mobility of Na+ is continuously enhanced, correlated with the increase in the molar volume. This new perspective highlights the significant impact of both free volume expansion and reduced Coulombic effects on conduction improvement.

High extraction and excellent anti-UV and anti-oxidant proprieties of lignin from Reseda Luteola L. waste by organosolv process.

Lignin is an abundant natural biopolymer found in plant cell walls. Lignin can come from tinctorial plants, whose residual biomass after dye extraction was typically discarded as waste. The main objective of this study was to extract lignin from the residual biomass of Reseda luteola L. using an organosolv process and to optimize the extraction conditions. The extracted lignin was characterized, and its potential applications as an antimicrobial, anti-oxidant, and anti-UV agent were investigated. Response surface methodology based on a Box-Behnken design was employed to optimize the lignin extraction conditions (organic acid concentration, material-to-liquid ratio, extraction time). The extracted lignin was comprehensively characterized using NMR, FTIR, XRD, SEM-EDX, TGA, DSC, and UV-Vis techniques. The optimal extraction conditions yielded a remarkably high lignin recovery of 62.41 % from the plant waste, which was rarely achieved for non-wood plants in previous works. The extracted lignin exhibited excellent thermal stability and radical scavenging anti-oxidant activity but no significant antimicrobial effects. Treating wool fabrics with lignin nanoparticles substantially enhanced UV protection from the "good" to "excellent" category based on the UPF rating. This sustainable valorization approach converted abundant tinctorial plant waste into high-purity lignin with promising anti-oxidant and UV-blocking properties suitable for various applications.

Design and development of a highly efficient reusable zeolite impregnated ZnAl2O4 catalyst for biodiesel production.

As the demand for sustainable energy sources expands, the production of biodiesel has attracted great attention. The development of effective and ecologically friendly biodiesel catalysts has become an urgent need. In this context, the goal of this study is to develop a composite solid catalyst with enhanced efficiency, reusability, and reduced environmental impact. For that, eco-friendly, and reusable composite solid catalysts have been designed by impregnating different amounts of zinc aluminate into a zeolite matrix (ZnAl2O4@Zeolite). Structural and morphological characterizations confirmed the successful impregnation of zinc aluminate into the zeolite porous structure. Catalytic experiments revealed that the catalyst containing 15 wt% ZnAl2O4 showed the highest conversion activity of fatty acid methyl esters (FAME) of 99% under optimized reaction conditions, including 8 wt% catalyst, a molar ratio of 10:1 methanol to oil, a temperature of 100 °C, and 3 h of reaction time. The developed catalyst demonstrated high thermal and chemical stability, maintaining good catalytic activity even after five cycles. Furthermore, the produced biodiesel quality assessment has demonstrated good properties in compliance with the criteria of the American Society for Testing and Materials ASTM-D6751 and the European Standard EN14214. Overall, the findings of this study could have a significant impact on the commercial production of biodiesel by offering an efficient and environmentally friendly reusable catalyst, ultimately reducing the cost of biodiesel production.

Crystallography at non-ambient conditions and physical properties of the synthesized double perovskites, Sr2(Co1-xFex)TeO6.

Polycrystalline double perovskite-type Sr2(Co1-xFex)TeO6 with various stoichiometric compositions (x = 0, 0.25, 0.5, 0.75, and 1) were synthesized by solid-state reactions in air. The crystal structures and phase transitions of this series at different temperature intervals were determined by X-ray powder diffraction, and from the obtained data the crystal structures were refined. It has been proven that for the compositions x = 0.25, 0.50, and 0.75, the phases crystallize at room temperature in the monoclinic space group I2/m. Down to 100 K, depending on the composition, these structures experience a phase transition from I2/m to P21/n. At high temperatures up to 1100 K their crystal structures show two further phase transitions. The first one is a first-order phase transition, from monoclinic I2/m to tetragonal I4/m, followed by a second-order phase transition to cubic Fm3̄m. Therefore, the phase transition sequence of this series detected at temperatures ranging from 100 K to 1100 K is P21/n → I2/m → I4/m → Fm3̄m. The temperature-dependent vibrational features of the octahedral sites were investigated by Raman spectroscopy, which furthermore complements the XRD results. A decrease in the phase-transition temperature with increasing iron content has been observed for these compounds. This fact is explained by the progressive diminishing of the distortion of the double-perovskite structure in this series. Using room-temperature Mössbauer spectroscopy, the presence of two iron sites is confirmed. The two different transition metal cations Co and Fe at the B sites allow exploring their effect on the optical band-gap.

Effects of iron substitution and anti-site disorder on crystal structures, vibrational, optical and magnetic properties of double perovskites Sr2(Fe1-xNix)TeO6.

The double-perovskite series, Sr2(Fe1-xNix)TeO6 (x = 0, 0.25, 0.50, 0.75, and 1) has been synthesized in polycrystalline form by solid-state reaction at 1300 K in air. Their crystal structures were probed by powder X-ray diffraction at room temperature. Rietveld analysis revealed that all samples crystallize in the monoclinic space group I2/m. The double-perovskite structures ideally contain two alternating types of octahedra (Fe/Ni)2dO6 and (Te)2aO6, tilted in the system (a-a-c0). However, the refinements have shown a complex distribution of all three cations over the two available octahedral sites; 2d (½, ½, 0) and 2a (0, 0, 0). Raman spectroscopy further complements the obtained results, by revealing a tiny increase of the wavenumber of some Raman modes when Fe is substituted by Ni. The optical characteristics of the series were determined by fitting diffuse reflectance UV/Vis spectra enabling the optical band gaps to be derived from Tauc method and derivation of absorption spectra fitting (DASF) techniques. Analyses of the obtained 57Fe Mössbauer hyperfine parameters at room temperature of samples with compositions x = 0, 0.25, 0.50 and 0.75 reveal the presence of Fe3+ in high-spin state with an anti-site disorder of Fe-Ni-Te cations in distorted octahedral environments (site 2d and 2a). The results show that significant correlations exist between the crystal structures and physical properties of double perovskites containing B site transition elements of different charge and size. Temperature-dependent magnetic susceptibility data show magnetic transitions below 40(1) K (38(1) K, 31(1) K, 25(1) K, 20(1) K, and 35(1) K for x = 0, 0.25, 0.50, 0.75, and 1, respectively. A divergence between FC and ZFC curves for all compositions has been observed. The results show that the ground states of the doped materials might be spin glasses or magnetically ordered.

Poly[(µ(3)-hydrogenphosphato)(4H-1,2,4-triazole-κN(1))zinc].

The asymmetric unit of the title compound, [Zn(HPO(4))(C(2)H(3)N(3))](n), contains one Zn(2+) cation, one (HPO(4))(2-) anion and a 1,2,4 triazole ligand. The Zn(2+) cation is coordinated in a quite regular tetra-hedral geometry by O atoms from three phosphate groups and a tertiary N atom from the triazole ring. Each phosphate anion is connected to three Zn(II) cations, leading to a series of corrugated organic-inorganic layers parallel to the ac plane. The overall structure involves stacking of complex hybrid organic-inorganic layers along the b axis. Cohesion in the crystal is ensured by an infinite three-dimensional network of N-H⋯O and O-H⋯O hydrogen bonds between the phosphate groups and the triazole ligands.