Clinical characteristics of chylothorax: results from the International Collaborative Effusion database.

Background: Chylothorax is an uncommon medical condition for which limited data are available regarding the contemporary aetiology, management and outcomes. The goal of this study was to better define these poorly characterised features. Methods: The medical records of adult patients diagnosed with chylothorax at 12 centres across Europe, America and South Africa from 2009-2021 were retrospectively reviewed. Descriptive and inferential statistics were performed. Results: 77 patients (median age 69 years, male to female ratio 1.5) were included. Subacute dyspnoea was the most typical presenting symptom (66%). The commonest cause of chylothorax was malignancy (68.8%), with lymphoma accounting for 62% of these cases. Other aetiologies were trauma (13%), inflammatory/miscellaneous conditions (11.7%) and idiopathic cases (6.5%). At the initial thoracentesis, the pleural fluid appeared milky in 73%, was exudative in 89% and exhibited triglyceride concentrations >100 mg·dL-1 in 88%. Lymphangiography/lymphoscintigraphy were rarely ordered (3%), and demonstration of chylomicrons in pleural fluid was never ascertained. 67% of patients required interventional pleural procedures. Dietary measures were infrequently followed (36%). No patient underwent thoracic duct ligation or embolisation. Morbidity included infections (18%), and thrombosis in malignant aetiologies (16%). The 1-year mortality was 47%. Pleural fluid protein >3.5 mg·dL-1 (sub-distribution hazard ratio (SHR) 4.346) or lactate dehydrogenase <500 U·L-1 (SHR 10.21) increased the likelihood of effusion resolution. Pleural fluid protein ≤3.5 mg·dL-1 (HR 4.047), bilateral effusions (HR 2.749) and a history of respiratory disease (HR 2.428) negatively influenced survival. Conclusion: Chylothoraces have a poor prognosis and most require pleural interventions. Despite the standard recommendations, lymphatic imaging is seldom used, nor are dietary restrictions followed.

Effect of Surface Treatments on Adhesion of Milled Polyetheretherketone Post to Different Composite Resin Core Build-Up Materials.

Background: To evaluate the effect of surface treatments on adhesion of milled PEEK post to two different composite resin core-build up materials. Material and Methods: Six PEEK posts were divided into the following groups: G1: no treatment+ Grandio core material, G2: no treatment+ Bulk-fill core material, G3: 98% sulfuric acid for 60 seconds+ Grandio core material, G4: 98% sulfuric acid for 60 seconds+ Bulk-fill core material, G5: 50 µm airborne particle abraded + Grandio core material, G6: 50 µm airborne particle abraded + bulk fill core material. The adhesion of the post to core build-up materials was tested using micro push-out bond strength. Data were analyzed using ANOVA and Tukey's test. Results: There was a significant effect for the surface treatment (p<.001), a non-significant effect for the core build-up materials (p<.289), and a significant effect for their interaction (p<.001) on the bond strength values. Conclusions: Within the limitation of this study, sulfuric acid etching group significantly increased the bond strength compared to other groups. Bulk-fill core material could be a feasible option when restoring ETT in terms of saving chair time and the treatment procedure simplicity. Key words:Bond Strength, Core material, PEEK, Surface Treatment.

Investigation and outcomes in patients with nonspecific pleuritis: results from the International Collaborative Effusion database.

Introduction: We present findings from the International Collaborative Effusion database, a European Respiratory Society clinical research collaboration. Nonspecific pleuritis (NSP) is a broad term that describes chronic pleural inflammation. Various aetiologies lead to NSP, which poses a diagnostic challenge for clinicians. A significant proportion of patients with this finding eventually develop a malignant diagnosis. Methods: 12 sites across nine countries contributed anonymised data on 187 patients. 175 records were suitable for analysis. Results: The commonest aetiology for NSP was recorded as idiopathic (80 out of 175, 44%). This was followed by pleural infection (15%), benign asbestos disease (12%), malignancy (6%) and cardiac failure (6%). The malignant diagnoses were predominantly mesothelioma (six out of 175, 3.4%) and lung adenocarcinoma (four out of 175, 2.3%). The median time to malignant diagnosis was 12.2 months (range 0.8-32 months). There was a signal towards greater asbestos exposure in the malignant NSP group compared to the benign group (0.63 versus 0.27, p=0.07). Neither recurrence of effusion requiring further therapeutic intervention nor initial biopsy approach were associated with a false-negative biopsy. A computed tomography finding of a mass lesion was the only imaging feature to demonstrate a significant association (0.18 versus 0.01, p=0.02), although sonographic pleural thickening also suggested an association (0.27 versus 0.09, p=0.09). Discussion: This is the first multicentre study of NSP and its associated outcomes. While some of our findings are reflected by the established body of literature, other findings have highlighted important areas for future research, not previously studied in NSP.

Three-year clinical evaluation of zirconia and zirconia-reinforced lithium silicate crowns with minimally invasive vertical preparation technique.

OBJECTIVES: Large part of the tooth is required to be removed during crown preparation. A minimally invasive method for preparing single crowns is required to increase the durability of teeth. The aim of this study was to evaluate the clinical performance of two ceramic systems fabricated with minimally invasive vertical preparation. MATERIALS AND METHODS: Forty endodontically treated maxillary premolars were prepared with vertical preparation and received temporary crowns for a period of 21 days. Twenty zirconia-reinforced lithium silicate (Celtra Duo HT, Dentsply Sirona, Germany) and 20 monolithic high translucency zirconia (Katana HT, Kuarary Noritake, Japan) crowns were fabricated by CAD/CAM and cemented with dual-polymerizing luting resin. The crowns were evaluated clinically and radiographically for 36 months following modified FDI criteria. Statistical analysis was conducted with t Student test (Cochran Q). RESULTS: Over the follow-up period, there was no need to replace any of the study's crowns. The overall survival rate of the 40 crowns was 100% according to the Kaplan-Meier survival method. The clinical quality of all crowns and the patient's satisfaction were high. No caries was detected and no adverse soft tissue reactions around the crowns were observed. Periodontal probing depth was reported to be increased at mesial and distal sites more than the facial one in the 36-month follow-up with no statistically significant difference between both materials (P = 0.186). CONCLUSIONS: Zirconia and zirconia-reinforced lithium silicate could be used as a material for restoration of teeth prepared with vertical preparation technique. Both ceramic materials achieved good esthetic results, promotes healthy and stable soft tissues with no mechanical complications after 3 years of clinical evaluation. CLINICAL RELEVANCE: Monolithic high translucency zirconia and zirconia-reinforced lithium silicate ceramics can be used for the restorations of minimal invasive vertical preparation in premolar area with 0.5 mm margin thickness.

Objective Thoracoscopic Criteria in Differentiation between Benign and Malignant Pleural Effusions.

BACKGROUND: Thoracoscopy is the "gold standard" diagnostic modality for investigation of suspected pleural malignancy. It is postulated that meticulous assessment of the pleural cavity may be adequate to indicate malignancy through the macroscopic findings of nodules, pleural thickening, and lymphangitis. We attempted to critically assess this practice, by precisely defining objective macroscopic criteria which might differentiate benign from malignant pleural diseases according to intrapleural pattern and anatomical location, and thereby to explore the predilection of abnormalities to specific sites on pleural surfaces. METHODS: A structured review of recorded video footage from medical thoracoscopy procedures in 96 patients was conducted by 2 independent assessors. Abnormalities were scored on agreed, objective criteria for the presence of nodules, lymphangitis and inflammation on each of the costoparietal, visceral and diaphragmatic surfaces. The costoparietal pleura was divided into 6 levels (apical, middle, and inferior surfaces of the lateral and posterior parietal pleura). The anterior surface of the costoparietal pleura was excluded from analysis after interim review as this surface was rarely seen. RESULTS: In the benign group, inflammation was the predominant finding in 65% (n = 33; costoparietal), 44% (n = 21; visceral), and 42% (n = 15; diaphragmatic). Nodules were detected in 24% (n = 12; costoparietal), 8% (n = 4; visceral), and 8% (n = 3; diaphragmatic). The most affected surfaces with inflammation were the middle lateral (60%) and the inferior lateral (57.8%) parts of the costoparietal pleura. In the malignant group, nodules were the predominant finding according to surface in 73% (n = 33; costoparietal), 32% (n = 13; visceral) and 48% (n = 17; diaphragmatic). Inflammation was detected in 44% (n = 20; costoparietal), 25% (n = 10; visceral), and 29% (n = 10; diaphragmatic). The most affected surfaces with nodules were the middle lateral (67.4%) and inferior lateral (66.7%) costoparietal pleural surfaces. CONCLUSION: This is the first detailed, anatomical description of abnormalities in the pleural space during thoracoscopy. While nodules were the predominant pattern in malignant pleural effusion, they were detected in 24% of benign diagnoses. Detection of nodules in >1 area of the costoparietal pleura was in favor of a malignant diagnosis. Inflammation was the predominant pattern in benign pleural effusion. Our results suggest that macroscopic nodules in malignant diagnoses have a predilection for the middle and inferior surfaces of the lateral costoparietal pleura.

Evaluation of zirconia and zirconia-reinforced glass ceramic systems fabricated for minimal invasive preparations using a novel standardization method.

OBJECTIVE: Currently, minimal invasive approaches combining less invasive finish line preparations and reduced ceramic thickness are required. The aim of this study was to evaluate the fracture resistance of two ceramic systems fabricated with two preparation designs using CAD/CAM standardization technology. MATERIALS AND METHODS: Forty intact human maxillary premolars were divided into two main groups according to the preparation technique. Group H (Horizontal): teeth with shoulder finish line and group V (Vertical): teeth with feather edge. Each main group was subdivided randomly into two subgroups according to the material used. Group CD (Celtra Duo) zirconia-reinforced glass ceramics and group K (KATANA) monolithic zirconia. CAD/CAM was used for standardization of natural teeth preparation. After cementation using self-adhesive resin cement, all specimens were subjected to 5000 thermal cycles and then were loaded until fracture. Failure types were evaluated using Stereomicroscopy and Scanning Electron Microscopy (SEM). RESULTS: Nonsignificant; the higher mean value was recorded with VCD group (482.5 ± 103.8 N) and VK group (1347.6 ± 177.4 N) vs HCD group (471 ± 107.6 N) and HK group (1255.6 ± 121.3 N). SEM findings showed that fractures occurred mainly at the occlusal side of the crowns. CONCLUSIONS: Vertical preparation showed a promising alternative to horizontal preparation. Moreover, both Celtra Duo and KATANA crowns can be used in premolar area with 0.5 mm margin thickness. CLINICAL SIGNIFICANCE: Zirconia-reinforced glass ceramic and monolithic zirconia crowns may not necessitate the preparation of invasive finish lines as the type of finish line did not impair the strength after aging conditions.