Structural Studies of a Complex of a CAG/CTG Repeat Sequence-Specific Binding Molecule and A-A-Mismatch-Containing DNA.

Triplet repeat diseases are caused by the abnormal elongation of repeated sequences comprising three bases. In particular, the elongation of CAG/CTG repeat sequences is thought to result in conditions such as Huntington's disease and myotonic dystrophy type 1. Although the causes of these diseases are known, fundamental treatments have not been established, and specific drugs are expected to be developed. Pyrrole imidazole polyamide (PIP) is a class of molecules that binds to the minor groove of the DNA duplex in a sequence-specific manner; because of this property, it shows promise in drug discovery applications. Earlier, it was reported that PIP designed to bind CAG/CTG repeat sequences suppresses the genes that cause triplet repeat diseases. In this study, we performed an X-ray crystal structure analysis of a complex of double-stranded DNA containing A-A mismatched base pairs and a cyclic-PIP that binds specifically to CAG/CTG sequences. Furthermore, the validity and characteristics of this structure were analyzed using in silico molecular modeling, ab initio energy calculations, gel electrophoresis, and surface plasmon resonance. With our direct observation using atomic force microscopy and DNA origami, we revealed that the PIP caused structural changes in the DNA strands carrying the expanded CAG/CTG repeat. Overall, our study provides new insight into PIP from a structural perspective.

Photocontrolled DNA nanotubes as stiffness tunable matrices for controlling cellular behavior.

Cell behavior is determined by a variety of properties of the extracellular environment like ligand spacing, nanotopography, and matrix stiffness. Matrix stiffness changes occur during many biological processes like wound healing, tumorigenesis, and development. These spatio-temporal dynamic changes in stiffness can cause significant changes in cell morphology, cell signaling, migration, cytoskeleton etc. In this paper, we have created photocontrolled stiffness-tunable DNA nanotubes which can undergo reversible changes in their conformation upon UV and VIS irradiation. When used as a substrate for cell culture, the photocontrolled DNA nanotubes can tune the cell morphology of HeLa cells from a long spindle-shaped morphology with long filopodia protrusions to a round morphology with short filopodia-like extrusions. Such a photocontrolled nanosystem can give us deep insights into the cell-matrix interactions in the native extracellular matrix caused by nanoscopic changes in stiffness.

Zeptoliter DNA Origami Reactor to Reveal Cosolute Effects on Nanoconfined G-Quadruplexes.

Cellular environments such as nanoconfinement and molecular crowding can change biomolecular properties. However, in nanoconfinement, it is extremely challenging to investigate effects of crowding cosolutes on macromolecules. By using optical tweezers, here, we elucidated the effects of hexaethylene glycol (HEG) on the mechanical stability of a telomeric G-quadruplex (GQ) in a zeptoliter DNA origami reactor (zepto-reactor). When HEG molecules were introduced in the GQ-containing zepto-reactor at different positions, we found that the GQ species split into two equilibrated populations, reflecting diverse effects of the oligoethylene glycol on the GQ via either a long-range dehydration effect or direct interactions. When the number of HEG molecules was increased, the stability of the GQ unexpectedly decreased, suggesting that the direct destabilizing interaction between the GQ and HEG is dominating over the long-range stabilizing dehydration effects of the HEG in hydrophilic nanocavities. These findings indicate that a nanoconfined environment can alter regular effects of cosolutes on biomacromolecules.

Dissection of nanoconfinement and proximity effects on the binding events in DNA origami nanocavity.

Both ligand binding and nanocavity can increase the stability of a biomolecular structure. Using mechanical unfolding in optical tweezers, here we found that a DNA origami nanobowl drastically increased the stability of a human telomeric G-quadruplex bound with a pyridostatin (PDS) ligand. Such a stability change is equivalent to >4 orders of magnitude increase (upper limit) in binding affinity (Kd: 490 nM → 10 pM (lower limit)). Since confined space can assist the binding through a proximity effect between the ligand-receptor pair and a nanoconfinement effect that is mediated by water molecules, we named such a binding as mechanochemical binding. After minimizing the proximity effect by using PDS that can enter or leave the DNA nanobowl freely, we attributed the increased affinity to the nanoconfinement effect (22%) and the proximity effect (78%). This represents the first quantification to dissect the effects of proximity and nanoconfinement on binding events in nanocavities. We anticipate these DNA nanoassemblies can deliver both chemical (i.e. ligand) and mechanical (i.e. nanocavity) milieus to facilitate robust mechanochemical binding in various biological systems.

Photocontrolled DNA Origami Assembly by Using Two Photoswitches.

Stimuli-responsive switching molecules have been widely investigated for the purpose of the mechanical control of biomolecules. Recently developed arylazopyrazole (AAP) shows photoisomerization activity, displaying a faster response to light-induced conformational changes and unique absorption spectral properties compared with those of conventionally used azobenzene. Herein, it is demonstrated that AAP can be used as a photoswitching molecule to control photoinduced assembly and disassembly of DNA origami nanostructures. An AAP-modified DNA origami has been designed and constructed. It is observed that the repeated assembly and disassembly of AAP-modified X-shaped DNA origami and hexagonal origami with complementary strands can be achieved by alternating UV and visible-light irradiation. Closed and linear assemblies of AAP-modified X-shaped origami were successfully formed by photoirradiation, and more than 1 µm linear assemblies were formed. Finally, it is shown that the two photoswitches, AAP and azobenzene, can be used in tandem to independently control different assembly configurations by using different irradiation wavelengths. AAP can extend the variety of available wavelengths of photoswitches and stably result in the assembly and disassembly of various DNA origami nanostructures.

Translation-dependent unwinding of stem-loops by UPF1 licenses Regnase-1 to degrade inflammatory mRNAs.

Regnase-1-mediated mRNA decay (RMD), in which inflammatory mRNAs harboring specific stem-loop structures are degraded, is a critical part of proper immune homeostasis. Prior to initial translation, Regnase-1 associates with target stem-loops but does not carry out endoribonucleolytic cleavage. Single molecule imaging revealed that UPF1 is required to first unwind the stem-loops, thus licensing Regnase-1 to proceed with RNA degradation. Following translation, Regnase-1 physically associates with UPF1 using two distinct points of interaction: The Regnase-1 RNase domain binds to SMG1-phosphorylated residue T28 in UPF1; in addition, an intrinsically disordered segment in Regnase-1 binds to the UPF1 RecA domain, enhancing the helicase activity of UPF1. The SMG1-UPF1-Regnase-1 axis targets pioneer rounds of translation and is critical for rapid resolution of inflammation through restriction of the number of proteins translated by a given mRNA. Furthermore, small-molecule inhibition of SMG1 prevents RNA unwinding in dendritic cells, allowing post-transcriptional control of innate immune responses.

A Photocaged DNA Nanocapsule for Controlled Unlocking and Opening inside the Cell.

We report a nanosized DNA capsule with a photoinducible mechanical unlocking system for creation of a carrier for delivery system to the cells. A photocage system was introduced into the nanocapsule (NC) for control of opening of the NC with photoirradiation. The opening of the NC was observed by atomic force microscopy (AFM), and the dynamic opening of the NC was examined by fluorescence recovery from the quenching. The photocaged NC was introduced to the cell without toxicity and observed in the cytoplasm, and the photoinduced opening of the NC was observed in the cell. The selective unlocking and opening of the caged-NC in a single cell was successfully achieved by a laser irradiation to individual cells.

Programming Rotary Motions with a Hexagonal DNA Nanomachine.

Biological macromolecular machines perform impressive mechanical movements. F-adenosine triphosphate (ATP) synthase uses a proton gradient to generate ATP through mechanical rotations. Here, a programmed hexagonal DNA nanomachine, in which a three-armed DNA nanostructure (TAN) can perform stepwise rotations in the confined nanospace powered by DNA fuels, is demonstrated. The movement of TAN can precisely go through a 60° rotation, which is confirmed by atomic force microscopy, and each stepwise directional rotating is monitored by fluorescent measurements. Moreover, the rotary nanomachine is used to spatially organize cascade enzymes: glucose oxidase (GOx) and horseradish peroxidase (HRP) in four different arrangements. The multistep regulations of the biocatalytic activities are achieved by employing TAN rotations. This work presents a new prototype of rotary nanodevice with both angular and directional control, and provides a nanoscale mechanical engineering platform for the reactive molecular components, demonstrating that DNA-based framework may have significant roles in futuristic nanofactory construction.

Decreased water activity in nanoconfinement contributes to the folding of G-quadruplex and i-motif structures.

Due to the small size of a nanoconfinement, the property of water contained inside is rather challenging to probe. Herein, we measured the amount of water molecules released during the folding of individual G-quadruplex and i-motif structures, from which water activities are estimated in the DNA nanocages prepared by 5 × 5 to 7 × 7 helix bundles (cross-sections, 9 × 9 to 15 × 15 nm). We found water activities decrease with reducing cage size. In the 9 × 9-nm cage, water activity was reduced beyond the reach of regular cosolutes such as polyethylene glycol (PEG). With this set of nanocages, we were able to retrieve the change in water molecules throughout the folding trajectory of G-quadruplex or i-motif. We found that water molecules absorbed from the unfolded to the transition states are much fewer than those lost from the transition to the folded states. The overall loss of water therefore drives the folding of G-quadruplex or i-motif in nanocages with reduced water activities.

Triggering nucleic acid nanostructure assembly by conditional kissing interactions.

Nucleic acids are biomolecules of amazing versatility. Beyond their function for information storage they can be used for building nano-objects. We took advantage of loop-loop or kissing interactions between hairpin building blocks displaying complementary loops for driving the assembly of nucleic acid nano-architectures. It is of interest to make the interaction between elementary units dependent on an external trigger, thus allowing the control of the scaffold formation. To this end we exploited the binding properties of structure-switching aptamers (aptaswitch). Aptaswitches are stem-loop structured oligonucleotides that engage a kissing complex with an RNA hairpin in response to ligand-induced aptaswitch folding. We demonstrated the potential of this approach by conditionally assembling oligonucleotide nanorods in response to the addition of adenosine.

Single-Molecule Observation of the Photoregulated Conformational Dynamics of DNA Origami Nanoscissors.

We demonstrate direct observation of the dynamic opening and closing behavior of photocontrollable DNA origami nanoscissors using high-speed atomic force microscopy (HS-AFM). First the conformational change between the open and closed state controlled by adjustment of surrounding salt concentration could be directly observed during AFM scanning. Then light-responsive moieties were incorporated into the nanoscissors to control these structural changes by photoirradiation. Using photoswitchable DNA strands, we created a photoresponsive nanoscissors variant and were able to distinguish between the open and closed conformations after respective irradiation with ultraviolet (UV) and visible (Vis) light by gel electrophoresis and AFM imaging. Additionally, these reversible changes in shape during photoirradiation were directly visualized using HS-AFM. Moreover, four photoswitchable nanoscissors were assembled into a scissor-actuator-like higher-order object, the configuration of which could be controlled by the open and closed switching induced by irradiation with UV and Vis light.

Confined space facilitates G-quadruplex formation.

Molecular simulations suggest that the stability of a folded macromolecule increases in a confined space due to entropic effects. However, due to the interactions between the confined molecular structure and the walls of the container, clear-cut experimental evidence for this prediction is lacking. Here, using DNA origami nanocages, we show the pure effect of confined space on the property of individual human telomeric DNA G-quadruplexes. We induce targeted mechanical unfolding of the G-quadruplex while leaving the nanocage unperturbed. We find that the mechanical and thermodynamic stabilities of the G-quadruplex inside the nanocage increase with decreasing cage size. Compared to the case of diluted or molecularly crowded buffer solutions, the G-quadruplex inside the nanocage is significantly more stable, showing a 100 times faster folding rate. Our findings suggest the possibility of co-replicational or co-transcriptional folding of G-quadruplex inside the polymerase machinery in cells.

A Photoregulated DNA-Based Rotary System and Direct Observation of Its Rotational Movement.

Various DNA-based nanodevices have been developed on the nanometer scale using light as regulation input. However, the programmed controllability is still a major challenge for these artificial nanodevices. Herein, we demonstrate a rotary DNA nanostructure in which the rotations are controlled by light. A bar-shaped DNA rotor, fabricated as a stiff double-crossover molecule, was placed on the top of a rectangular DNA tile. The photoresponsive oligonucleotides modified with azobenzenes were employed as switching motifs to release/trap the rotor at specific angular position on DNA tile by switching photoirradiations between ultraviolet and visible light. As a result, two reconfigurable states (perpendicular and parallel) of rotor were obtained, in which the angular changes were characterized by AFM and fluorescence quenching assays. Moreover, the reversible rotary motions during the photoirradiation were directly visualized on the DNA tile surface in a nanometer-scale precision using a second-scale scanning of the high-speed AFM.

Mechanical properties of DNA origami nanoassemblies are determined by Holliday junction mechanophores.

DNA nanoassemblies have demonstrated wide applications in various fields including nanomaterials, drug delivery and biosensing. In DNA origami, single-stranded DNA template is shaped into desired nanostructure by DNA staples that form Holliday junctions with the template. Limited by current methodologies, however, mechanical properties of DNA origami structures have not been adequately characterized, which hinders further applications of these materials. Using laser tweezers, here, we have described two mechanical properties of DNA nanoassemblies represented by DNA nanotubes, DNA nanopyramids and DNA nanotiles. First, mechanical stability of DNA origami structures is determined by the effective density of Holliday junctions along a particular stress direction. Second, mechanical isomerization observed between two conformations of DNA nanotubes at 10-35 pN has been ascribed to the collective actions of individual Holliday junctions, which are only possible in DNA origami with rotational symmetric arrangements of Holliday junctions, such as those in DNA nanotubes. Our results indicate that Holliday junctions control mechanical behaviors of DNA nanoassemblies. Therefore, they can be considered as 'mechanophores' that sustain mechanical properties of origami nanoassemblies. The mechanical properties observed here provide insights for designing better DNA nanostructures. In addition, the unprecedented mechanical isomerization process brings new strategies for the development of nano-sensors and actuators.

Triple Helix Formation in a Topologically Controlled DNA Nanosystem.

In the present study, we demonstrate single-molecule imaging of triple helix formation in DNA nanostructures. The binding of the single-molecule third strand to double-stranded DNA in a DNA origami frame was examined using two different types of triplet base pairs. The target DNA strand and the third strand were incorporated into the DNA frame, and the binding of the third strand was controlled by the formation of Watson-Crick base pairing. Triple helix formation was monitored by observing the structural changes in the incorporated DNA strands. It was also examined using a photocaged third strand wherein the binding of the third strand was directly observed using high-speed atomic force microscopy during photoirradiation. We found that the binding of the third strand could be controlled by regulating duplex formation and the uncaging of the photocaged strands in the designed nanospace.

Self-assembling DNA hydrogel-based delivery of immunoinhibitory nucleic acids to immune cells.

Immunoinhibitory oligodeoxynucleotides (INH-ODNs) are promising inhibitors of Toll-like receptor 9 (TLR9) activation. To efficiently deliver INH-ODNs to TLR9-positive cells, we designed a Takumi-shaped DNA (Takumi) consisting of two partially complementary ODNs as the main component of a DNA hydrogel. Polyacrylamide gel electrophoresis showed that Takumi-containing INH-ODNs (iTakumi) and iTakumi-based DNA hydrogel (iTakumiGel) were successfully generated. Their activity was examined in murine macrophage-like RAW264.7 cells and DC2.4 dendritic cells by measuring tumor necrosis factor-α and interleukin-6 release after the addition of a TLR9 ligand (CpG ODN). Cytokine release was efficiently inhibited by the iTakumiGel. Flow cytometry analysis and confocal microscopy showed that cellular uptake of INH-ODN was greatly increased by the iTakumiGel. These results indicate that a Takumi-based DNA hydrogel is useful for the delivery of INH-ODNs to immune cells to inhibit TLR9-mediated hyperinduction of proinflammatory cytokines. From the Clinical Editor: Toll-like receptor 9 activation has been reported to be associated with many autoimmune diseases. DNA inhibition using oligodeoxynucleotides is one of the potential treatments. In this article, the authors described hydrogel-based platform for the delivery of the inhibitory oligodeoxynucleotides for enhanced efficacy. The positive findings could indicate a way for the future.

Single-Molecule Manipulation of the Duplex Formation and Dissociation at the G-Quadruplex/i-Motif Site in the DNA Nanostructure.

We demonstrate the single-molecule operation and observation of the formation and resolution of double-stranded DNA (dsDNA) containing a G-quadruplex (GQ) forming and counterpart i-motif forming sequence in the DNA nanostructure. Sequential manipulation of DNA strands in the DNA frame was performed to prepare a topologically controlled GQ/i-motif dsDNA. Using strand displacement and the addition and removal of K(+), the topologically controlled GQ/i-motif dsDNA in the DNA frame was obtained in high yield. The dsDNA was resolved into the single-stranded DNA, GQ, and i-motif by the addition of K(+) and operation in acidic conditions. The dissociation of the dsDNA under the GQ and i-motif formation condition was monitored by high-speed atomic force microscopy. The results indicate that the dsDNA containing the GQ- and i-motif sequence is effectively dissolved when the duplex is helically loosened in the DNA nanoscaffold.

Optimal Arrangement of Four Short DNA Strands for Delivery of Immunostimulatory Nucleic Acids to Immune Cells.

Nanosized DNA assemblies are useful for delivering immunostimulatory cytosine-phosphate-guanine (CpG) DNA to immune cells, but little is known about the optimal structure for such delivery. In this study, we designed three different DNA nanostructures using four 55-mer oligodeoxynucleotides (ODNs), that is, tetrapod-like structured DNA (tetrapodna), tetrahedral DNA (tetrahedron), and tetragonal DNA (tetragon), and compared their potencies. Electrophoresis showed that tetrapodna was obtained with high yield and purity, whereas tetrahedron formed multimers at high ODN concentrations. Atomic force microscopy revealed that all preparations were properly constructed under optimal conditions. The thermal stability of tetrapodna was higher than those of the others. Dynamic light scattering analysis showed that all of the assemblies were about 8 nm in diameter. Upon addition to mouse macrophage-like RAW264.7 cells, tetrahedron was most efficiently taken up by the cells. Then, a CpG DNA, a ligand for toll-like receptor 9, was linked to these DNA nanostructures and added to RAW264.7 cells. CpG tetrahedron induced the largest amount of tumor necrosis factor-α, followed by CpG tetrapodna. Similar results were obtained using human peripheral blood mononuclear cells. Taken together, these results indicate that tetrapodna is the best assembly with the highest yield and high immunostimulatory activity, and tetrahedron can be another useful assembly for cellular delivery if its preparation yield is improved.

Single-Molecule Visualization of the Activity of a Zn(2+)-Dependent DNAzyme.

We demonstrate the single-molecule imaging of the catalytic reaction of a Zn(2+)-dependent DNAzyme in a DNA origami nanostructure. The single-molecule catalytic activity of the DNAzyme was examined in the designed nanostructure, a DNA frame. The DNAzyme and a substrate strand attached to two supported dsDNA molecules were assembled in the DNA frame in two different configurations. The reaction was monitored by observing the configurational changes of the incorporated DNA strands in the DNA frame. This configurational changes were clearly observed in accordance with the progress of the reaction. The separation processes of the dsDNA molecules, as induced by the cleavage by the DNAzyme, were directly visualized by high-speed atomic force microscopy (AFM). This nanostructure-based AFM imaging technique is suitable for the monitoring of various chemical and biochemical catalytic reactions at the single-molecule level.

Linking two DNA duplexes with a rigid linker for DNA nanotechnology.

DNA has recently emerged as a promising material for the construction of nanosized architectures. Chemically modified DNA has been suggested to be an important component of such architectural building blocks. We have designed and synthesized a novel H-shaped DNA oligonucleotide dimer that is cross-linked with a structurally rigid linker composed of phenylene and ethynylene groups. A rotatable DNA unit was constructed through the self-assembly of this H-shaped DNA component and two complementary DNA oligonucleotides. In addition to the rotatable unit, a locked DNA unit containing two H-shaped DNA components was also constructed. As an example of an extended locked structure, a hexagonal DNA origami dimer and oligomer were constructed by using H-shaped DNA as linkers.