RESUMO
Oscillatory flow in confined spaces is central to understanding physiological flows and rational design of synthetic periodic-actuation based micromachines. Using theory and experiments on oscillating flows generated through a laser-induced cavitation bubble, we associate the dynamic bubble size (fluid velocity) and bubble lifetime to the laser energy supplied-a control parameter in experiments. Employing different channel cross-section shapes, sizes and lengths, we demonstrate the characteristic scales for velocity, time and energy to depend solely on the channel geometry. Contrary to the generally assumed absence of instability in low Reynolds number flows ( < 1000 ), we report a momentary flow distortion that originates due to the boundary layer separation near channel walls during flow deceleration. The emergence of distorted laminar states is characterized using two stages. First the conditions for the onset of instabilities is analyzed using the Reynolds number and Womersley number for oscillating flows. Second the growth and the ability of an instability to prevail is analyzed using the convective time scale of the flow. Our findings inform rational design of microsystems leveraging pulsatile flows via cavitation-powered microactuation.
RESUMO
On-dose authentication (ODA) enhances security by incorporating customized molecular or micro-tags into each pill, preventing counterfeit products in genuine packages. ODA's security relies on tag non-replication and non-reverse engineering. Combining ODA with graphical Physical Unclonable Functions (PUF) promises maximum security. PUF uses intrinsic micro or nanoscale randomness as a unique 'fingerprint'. However, current graphical PUFs have limitations like specific illumination requirements and the use of toxic materials, restricting their use in pharmaceuticals. In this study, we propose a novel approach called on-dose PUF. This method involves embedding microspheres randomly within micro biocompatible hydrogel particles. We showcase two distinct types of such on-dose PUFs. The first type utilizes randomly distributed superparamagnetic colloids (SPC) of identical diameters, while the second type utilizes vortexed sunflower oil drops of various diameters. The diameter and coordinates of the microspheres serve as input for generating cryptographic keys. A universal circle identification and binning program is used for extracting this information. One advantage of this approach is that it enables imaging using white light illumination and low-magnification microscopy, as color and signal intensity information are not crucial. This method enables patients to verify their medication by using their mobile phones from home. To assess the performance of the proposed on-dose PUF, we conducted canonical investigations on the single-diameter system. This system can only generate one layer of cryptographic keys, making it potentially more vulnerable than the multiple-diameter system. However, the single-diameter system successfully passed NIST Statistical tests and exhibited sufficient randomness, ideal bit uniformity, Hamming distance, and device uniqueness. Furthermore, we found that the encoding capacity of the single-diameter system was 9.2×1018, providing ample labeling potential.
RESUMO
Herein, we study the influences of the laser-exposed volume and the irradiation position on the nonphotochemical laser-induced nucleation (NPLIN) of supersaturated potassium chloride solutions in water. The effect of the exposed volume on the NPLIN probability was studied by exposing distinct milliliter-scale volumes of aqueous potassium chloride solutions stored in vials at two different supersaturations (1.034 and 1.050) and laser intensities (10 and 23 MW/cm2). Higher NPLIN probabilities were observed with increasing laser-exposed volume as well as with increasing supersaturation and laser intensity. The measured NPLIN probabilities at different exposed volumes are questioned in the context of the dielectric polarization mechanism and classical nucleation theory. No significant change in the NPLIN probability was observed when samples were irradiated at the bottom, top, or middle of the vial. However, a significant increase in the nucleation probability was observed upon irradiation through the solution meniscus. We discuss these results in terms of mechanisms proposed for NPLIN.
RESUMO
We demonstrate that a cavitation bubble initiated by a Nd:YAG laser pulse below breakdown threshold induces crystallization from supersaturated aqueous solutions with supersaturation and laser-energy-dependent nucleation kinetics. Combining high-speed video microscopy and simulations, we argue that a competition between the dissipation of absorbed laser energy as latent and sensible heat dictates the solvent evaporation rate and creates a momentary supersaturation peak at the vapor-liquid interface. The number and morphology of crystals correlate to the characteristics of the simulated supersaturation peak.
RESUMO
Non-photochemical laser-induced nucleation (NPLIN) has emerged as a promising primary nucleation control technique offering spatiotemporal control over crystallization with potential for polymorph control. So far, NPLIN was mostly investigated in milliliter vials, through laborious manual counting of the crystallized vials by visual inspection. Microfluidics represents an alternative to acquiring automated and statistically reliable data. Thus we designed a droplet-based microfluidic platform capable of identifying the droplets with crystals emerging upon Nd:YAG laser irradiation using the deep learning method. In our experiments, we used supersaturated solutions of KCl in water, and the effect of laser intensity, wavelength (1064, 532, and 355 nm), solution supersaturation (S), solution filtration, and intentional doping with nanoparticles on the nucleation probability is quantified and compared to control cooling crystallization experiments. Ability of dielectric polarization and the nanoparticle heating mechanisms proposed for NPLIN to explain the acquired results is tested. Solutions with lower supersaturation (S = 1.05) exhibit significantly higher NPLIN probabilities than those in the control experiments for all laser wavelengths above a threshold intensity (50 MW/cm2). At higher supersaturation studied (S = 1.10), irradiation was already effective at lower laser intensities (10 MW/cm2). No significant wavelength effect was observed besides irradiation with 355 nm light at higher laser intensities (≥50 MW/cm2). Solution filtration and intentional doping experiments showed that nanoimpurities might play a significant role in explaining NPLIN phenomena.
RESUMO
Elevated humidity levels in medical, food, and pharmaceutical products may reduce the products' shelf life, trigger bacterial growth, and even lead to complete spoilage. In this study, we report a humidity indicator that mechanically bends and rolls itself irreversibly upon exposure to high humidity conditions. The indicator is made of two food-grade polymer films with distinct ratios of a milk protein, casein, and a plasticizer, glycerol, that are physically attached to each other. Based on the thermogravimetric analysis and microstructural characterization, we hypothesize that the bending mechanism is a result of hygroscopic swelling and consequent counter diffusion of water and glycerol. Guided by this mechanism, we demonstrate that the rolling behavior, including response time and final curvature, can be tuned by the geometric dimensions of the indicator. As the proposed indicator is made of food-grade ingredients, it can be placed directly in contact with perishable products to report exposure to undesirable humidity inside the package, without the risk of contaminating the product or causing oral toxicity in case of accidental digestion, features that commercial inedible electronic and chemo-chromatic sensors cannot provide presently.
RESUMO
Crystallization abounds in nature and industrial practice. A plethora of indispensable products ranging from agrochemicals and pharmaceuticals to battery materials are produced in crystalline form in industrial practice. Yet, our control over the crystallization process across scales, from molecular to macroscopic, is far from complete. This bottleneck not only hinders our ability to engineer the properties of crystalline products essential for maintaining our quality of life but also hampers progress toward a sustainable circular economy in resource recovery. In recent years, approaches leveraging light fields have emerged as promising alternatives to manipulate crystallization. In this review article, we classify laser-induced crystallization approaches where light-material interactions are utilized to influence crystallization phenomena according to proposed underlying mechanisms and experimental setups. We discuss nonphotochemical laser-induced nucleation, high-intensity laser-induced nucleation, laser trapping-induced crystallization, and indirect methods in detail. Throughout the review, we highlight connections among these separately evolving subfields to encourage the interdisciplinary exchange of ideas.
RESUMO
Large amounts of carbon monoxide are produced by industrial processes such as biomass gasification and steel manufacturing. The CO present in vent streams is often burnt, this produces a large amount of CO2, e.g., oxidation of CO from metallurgic flue gasses is solely responsible for 2.7% of manmade CO2 emissions. The separation of N2 from CO due to their very similar physical properties is very challenging, meaning that numerous energy-intensive steps are required for CO separation, making the CO separation from many process streams uneconomical in spite of CO being a valuable building block in the production of major chemicals through C1 chemistry and the production of linear hydrocarbons by the Fischer-Tropsch process. The development of suitable processes for the separation of carbon monoxide has both industrial and environmental significance. Especially since CO is a main product of electrocatalytic CO2 reduction, an emerging sustainable technology to enable carbon neutrality. This technology also requires an energy-efficient separation process. Therefore, there is a great need to develop energy efficient CO separation processes adequate for these different process streams. As such the urgency of separating carbon monoxide is gaining greater recognition, with research in the field becoming more and more crucial. This review details the principles on which CO separation is based and provides an overview of currently commercialised CO separation processes and their limitations. Adsorption is identified as a technology with the potential for CO separation with high selectivity and energy efficiency. We review the research efforts, mainly seen in the last decades, in developing new materials for CO separation via ad/bsorption and membrane technology. We have geared our review to both traditional CO sources and emerging CO sources, including CO production from CO2 conversion. To that end, a variety of emerging processes as potential CO2-to-CO technologies are discussed and, specifically, the need for CO capture after electrochemical CO2 reduction is highlighted, which is still underexposed in the available literature. Altogether, we aim to highlight the knowledge gaps that could guide future research to improve CO separation performance for industrial implementation.
RESUMO
Optofluidic devices have revolutionized the manipulation and transportation of fluid at smaller length scales ranging from micrometers to millimeters. We describe a dedicated optical setup for studying laser-induced cavitation inside a microchannel. In a typical experiment, we use a tightly focused laser beam to locally evaporate the solution laced with a dye resulting in the formation of a microbubble. The evolving bubble interface is tracked using high-speed microscopy and digital image analysis. Furthermore, we extend this system to analyze fluid flow through fluorescence-Particle Image Velocimetry (PIV) technique with minimal adaptations. In addition, we demonstrate the protocols for the in-house fabrication of a microchannel tailored to function as a sample holder in this optical setup. In essence, we present a complete guide for constructing a fluorescence microscope from scratch using standard optical components with flexibility in the design and at a lower cost compared to its commercial analogues.
RESUMO
The selective separation of ions is a major technological challenge having far-ranging impacts from product separation in electrochemical production of base chemicals from CO2 to water purification. In recent years, ion-selective electrochemical systems leveraging redox-materials emerged as an attractive platform based on their reversibility and remarkable ion selectivity. In the present study, we present an ultrasound-intensified fabrication process for polyvinyl ferrocene (PVF)-functionalized electrodes in a carbon nanotube (CNT) matrix for selective electro-adsorption of formate ions. To this end, a response surface methodology involving the Box-Behnken design with three effective independent variables, namely, PVF to CNT ratio, sonication duration, and ultrasonic amplitude was applied to reach the maximum formate adsorption efficiency. The fabricated electrodes were characterized using cyclic voltammetry, X-ray diffraction, Raman spectroscopy, and scanning electron microscopy (SEM). SEM images revealed that an optimized ultrasonic amplitude and sonication time provided remarkable improvements in electrode morphology. Through a sedimentation study, we qualitatively demonstrate that the main optimized conditions improved PVF/CNT dispersion stability, consequently providing the highest number of active surface sites for adsorption and the highest adsorption efficiency. The highest percentage of active electrode surface sites and the maximum adsorption efficiency were 97.8 and 90.7% respectively at a PVF/CNT ratio of 3, ultrasonication time of one hour, and 50% ultrasonic amplitude.
Assuntos
Nanotubos de Carbono , Dióxido de Carbono , Eletrodos , Compostos Ferrosos , Formiatos , Íons , Metalocenos , Nanotubos de Carbono/química , Polivinil , Projetos de PesquisaRESUMO
We present a droplet microfluidic platform mixing the contents of the droplet chaotically in microfluidic induction time measurements, a promising method for quantifying nucleation kinetics with minute amounts of solute. The nucleation kinetics of aqueous potassium chloride droplets dispersed in mineral oil without surfactants is quantified in the presence and absence of chaotic mixing. We demonstrate the ability of the proposed platform to dictate droplet size, to provide a homogeneous temperature distribution, and to chaotically mix the droplet contents. Chaotic mixing in induction time measurements is facilitated by the motion of droplets through serpentine micromixer bends, while the extent of mixing is controlled by how much droplets move. Different nucleation kinetics are observed in experiments where the droplets are static, mixed, and in motion. We hypothesize that the droplet motion induces formation of a thin-liquid Bretherton film surrounding the droplets. The thin film shields droplets from solid boundaries that are more efficient heteronucleant surfaces compared to liquid-liquid interfaces. We observed that repeated microfluidic induction time measurements, particularly with moving droplets, produce significantly distinct cumulative nucleation probability curves, indicating that the measured nucleation kinetics depend strongly on the details of the experimental procedure, which we discuss in detail. Finally, we compare the microfluidic experiments to well-mixed, milliliter volume, turbidity-based measurements in the context of classic nucleation theory.
RESUMO
A droplet-based microfluidic platform is presented to study the nucleation kinetics of calcium oxalate monohydrate (COM), the most common constituent of kidney stones, while carefully monitoring the pseudo-polymorphic transitions. The precipitation kinetics of COM is studied as a function of supersaturation and pH as well as in the presence of inhibitors of stone formation, magnesium ions (Mg2+), and osteopontin (OPN). We rationalize the trends observed in the measured nucleation rates leveraging a solution chemistry model validated using isothermal solubility measurements. In equimolar calcium and oxalate ion concentrations with different buffer solutions, dramatically slower kinetics is observed at pH 6.0 compared to pHs 3.6 and 8.6. The addition of both Mg2+ and OPN to the solution slows down kinetics appreciably. Interestingly, complete nucleation inhibition is observed at significantly lower OPN, namely, 3.2 × 10-8 M, than Mg2+ concentrations, 0.875 × 10-4 M. The observed inhibition effect of OPN emphasizes the often-overlooked role of macromolecules on COM nucleation due to their low concentration presence in urine. Moreover, analysis of growth rates calculated from observed lag times suggests that inhibition in the presence of Mg2+ cannot be explained solely on altered supersaturation. The presented study highlights the potential of microfluidics in overcoming a major challenge in nephrolithiasis research, the overwhelming physiochemical complexity of urine.
RESUMO
Selective crystallization of polymorphs is highly sought after in industrial practice. Yet, state-of-the-art techniques either use laboriously engineered solid surfaces or strenuously prepared heteronucleants. We propose an approach where surfactants in solution self-assemble effortlessly into mesoscopic structures dictating the polymorphic outcome of the target solute. Sodium dodecyl sulfate (SDS) surfactant is used as a tailored additive to crystallize different polymorphic forms of a model active pharmaceutical ingredient, d-mannitol. Different mesoscopic phases of SDS template particular polymorphs: packed monolayers, micelles, and crystals favored the ß, α, and δ forms of d-mannitol, respectively. A synergistic effect of topological templating and molecular interactions is proposed as the rationale behind the observed selective crystallization of polymorphs. This crystal engineering technique suggests that surfactant self-assemblies can be used as tailored templates for polymorphic control.
RESUMO
Mimicking the locomotive abilities of living organisms on the microscale, where the downsizing of rigid parts and circuitry presents inherent problems, is a complex feat. In nature, many soft-bodied organisms (inchworm, leech) have evolved simple, yet efficient locomotion strategies in which reciprocal actuation cycles synchronize with spatiotemporal modulation of friction between their bodies and environment. We developed microscopic (â¼100 µm) hydrogel crawlers that move in aqueous environment through spatiotemporal modulation of the friction between their bodies and the substrate. Thermo-responsive poly-n-isopropyl acrylamide hydrogels loaded with gold nanoparticles shrink locally and reversibly when heated photothermally with laser light. The out-of-equilibrium collapse and reswelling of the hydrogel is responsible for asymmetric changes in the friction between the actuating section of the crawler and the substrate. This friction hysteresis, together with off-centered irradiation, results in directional motion of the crawler. We developed a model that predicts the order of magnitude of the crawler motion (within 50%) and agrees with the observed experimental trends. Crawler trajectories can be controlled enabling applications of the crawler as micromanipulator that can push small cargo along a surface.
Assuntos
Hidrogéis , Nanopartículas Metálicas , Fricção , Ouro , Hidrogéis/química , LocomoçãoRESUMO
Comprehensive understanding of particle motion in microfluidic devices is essential to unlock additional technologies for shape-based separation and sorting of microparticles like microplastics, cells, and crystal polymorphs. Such particles interact hydrodynamically with confining surfaces, thus altering their trajectories. These hydrodynamic interactions are shape dependent and can be tuned to guide a particle along a specific path. We produce strongly confined particles with various shapes in a shallow microfluidic channel via stop flow lithography. Regardless of their exact shape, particles with a single mirror plane have identical modes of motion: in-plane rotation and cross-stream translation along a bell-shaped path. Each mode has a characteristic time, determined by particle geometry. Furthermore, each particle trajectory can be scaled by its respective characteristic times onto two master curves. We propose minimalistic relations linking these timescales to particle shape. Together these master curves yield a trajectory universal to particles with a single mirror plane.
RESUMO
HYPOTHESIS: Our ability to dictate the colloid geometry is intimately related to self-assembly. The synthesis of anisotropic colloidal particles is currently dominated by wet chemistry and lithographic techniques. The wet chemical synthesis offers limited particle geometries at bulk quantities. Lithographic techniques, on the other hand, provide precise control over the particle shape, although at lower yields. In this respect, two-photon polymerization (2PP)1 has attracted growing attention due to its ability to automatically fabricate complex micro/nano structures with high resolution. EXPERIMENTS: We manufacture precisely designed colloids with sizes ranging from 1 µm to 10 µm with 2PP and optimize the process parameters for each dimension. Moreover, we study the shape dependent Brownian motion of these particles with video microscopy and estimate their diffusion coefficients. FINDINGS: We observe that increasing the geometrical anisotropy leads to a pronounced deviation from the analytically predicted diffusion coefficient for disks with a given aspect ratio. The deviation is attributed to stronger hydrodynamic coupling with increasing anisotropy. We demonstrate, for the first time, 2PP manufacturing of colloids with tailored geometry. This study opens synthesis of colloidal building blocks to a broader audience with limited access to cleanrooms or wet-chemistry know-how.
RESUMO
We detail the analysis of centrifugal homogenization process by a hydrodynamic model and the model-guided design of a low-cost centrifugal homogenizer. During operation, centrifugal force pushes a multiphase solution to be homogenized through a thin nozzle, consequently homogenizing its contents. We demonstrate and assess the homogenization of coarse emulsions into relatively monodisperse emulsions, as well as the application of centrifugal homogenization in the mechanical lysis of mpkCCD mouse kidney cells. To gain insight into the homogenization mechanism, we investigate the dependence of emulsion droplet size on geometrical parameters, centrifugal acceleration, and dispersed phase viscosity. Our experimental results are in qualitative agreement with models predicting the droplet size. Furthermore, they indicate that high shear rates kept constant throughout operation produce more monodisperse droplets. We show this ideal homogenization condition can be realized through hydrodynamic model-guided design minimizing transient effects inherent to centrifugal homogenization. Moreover, we achieved power densities comparable to commercial homogenizers by model guided optimization of homogenizer design and experimental conditions. Centrifugal homogenization using the proposed homogenizer design thus offers a low-cost alternative to existing technologies as it is constructed from off-the-shelf parts (Falcon tubes, syringe, needles) and used with a centrifuge, readily available in standard laboratory environment.
Assuntos
Centrifugação , Animais , Células Cultivadas , Emulsões/química , Hidrodinâmica , Camundongos , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
Glycosaminoglycans (GAGs) are of interest for biomedical applications because of their ability to retain proteins (e.g. growth factors) involved in cell-to-cell signaling processes. In this study, the potential of GAG-based microgels for protein delivery and their protein release kinetics upon encapsulation in hydrogel scaffolds were investigated. Monodisperse hyaluronic acid methacrylate (HAMA) and chondroitin sulfate methacrylate (CSMA) micro-hydrogel spheres (diameters 500-700 µm), were used to study the absorption of a cationic model protein (lysozyme), microgel (de)swelling, intra-gel lysozyme distribution and its diffusion coefficient in the microgels dispersed in buffers (pH 7.4) of varying ionic strengths. Upon incubation in 20 mM buffer, lysozyme was absorbed up to 3 and 4 mg mg-1 dry microspheres for HAMA and CSMA microgels respectively, with loading efficiencies up to 100%. Binding stoichiometries of disaccharide : lysozyme (10.2 : 1 and 7.5 : 1 for HAMA and CSMA, respectively) were similar to those for GAG-lysozyme complex coacervates based on soluble GAGs found in literature. Complex coacervates inside GAG microgels were also formed in buffers of higher ionic strengths as opposed to GAG-lysozyme systems based on soluble GAGs, likely due to increased local anionic charge density in the GAG networks. Binding of cationic lysozyme to the negatively charged microgel networks resulted in deswelling up to a factor 2 in diameter. Lysozyme release from the microgels was dependent on the ionic strength of the buffer and on the number of anionic groups per disaccharide, (1 for HAMA versus 2 for CSMA). Lysozyme diffusion coefficients of 0.027 in HAMA and <0.006 µm2 s-1 in CSMA microgels were found in 170 mM buffer (duration of release 14 and 28 days respectively). Fluorescence Recovery After Photobleaching (FRAP) measurements yielded similar trends, although lysozyme diffusion was likely altered due to the negative charges introduced to the protein through the FITC-labeling resulting in weaker protein-matrix interactions. Finally, lysozyme-loaded CSMA microgels were embedded into a thermosensitive hydrogel scaffold. These composite systems showed complete lysozyme release in â¼58 days as opposed to only 3 days for GAG-free scaffolds. In conclusion, covalently crosslinked methacrylated GAG hydrogels have potential as controlled release depots for cationic proteins in tissue engineering applications.
Assuntos
Glicosaminoglicanos/química , Hidrogéis/química , Recuperação de Fluorescência Após Fotodegradação , Ácido Hialurônico/análogos & derivados , Ácido Hialurônico/química , Concentração de Íons de Hidrogênio , Dispositivos Lab-On-A-Chip , Concentração OsmolarRESUMO
We derive general equations of motions for highly-confined particles that perform quasi-two-dimensional motion in Hele-Shaw channels, which we solve analytically, aiming to derive design principles for self-steering particles. Based on symmetry properties of a particle, its equations of motion can be simplified, where we retrieve an earlier-known equation of motion for the orientation of dimer particles consisting of disks (Uspal et al 2013 Nat. Commun. 4), but now in full generality. Subsequently, these solutions are compared with particle trajectories that are obtained numerically. For mirror-symmetric particles, excellent agreement between the analytical and numerical solutions is found. For particles lacking mirror symmetry, the analytic solutions provide means to classify the motion based on particle geometry, while we find that taking the side-wall interactions into account is important to accurately describe the trajectories.
RESUMO
Evaporation of sessile droplets containing non-volatile solutes dispersed in a volatile solvent leaves behind ring-like solid stains. As the volatile species evaporates, pinning of the contact line gives rise to capillary flows that transport non-volatile solutes to the contact line. This phenomenon, called the coffee-ring effect, compromises the overall performance of industrially relevant manufacturing processes involving evaporation such as printing, biochemical analysis, manufacturing of nano-structured materials through colloidal and macromolecular patterning. Various approaches have been developed to suppress this phenomenon, which is otherwise difficult to avoid. The coffee-ring effect has also been leveraged to prepare new materials through convection induced assembly. This review underlines not only the strategies developed to suppress the coffee-ring effect but also sheds light on approaches to arrive at novel processes and materials. Working principles and applicability of these strategies are discussed together with a critical comparison.