Effect of extended days on feed on carcass gain, efficiency, and quality of individually fed beef steers.

Crossbred steers (n = 114, initial BW = 334 kg; SEM = 5 kg) were serially harvested to evaluate the change in carcass composition by feeding cattle 21 or 42 d longer than the 2014 industry average subjective measure of finish, 1.27 cm of 12th rib fat thickness. Carcass ultrasound measurements were collected on 76 steers at 1, 78, and 134 days on feed (DOF) to project appropriate harvest date. Steers were sorted into three harvest groups, and serially harvested at 142, 163, or 185 DOF, with the first harvest date selected based on an estimated 12th rib fat thickness of 1.27 cm via ultrasound measurement. Steers were fed using an individual animal feeding system, to determine individual performance metrics. Steer DMI did not differ (P ≥ 0.31) between harvest groups, while carcass-adjusted ADG and G:F decreased linearly (P ≤ 0.04) as DOF increased. Carcass weight increased linearly (P < 0.01) as DOF increased from 142 to 185 DOF, with steers gaining an additional 36 kg of HCW when fed an additional 42 DOF. Carcass LM area quadratically increased (P = 0.04) to 163 DOF and remained constant to 185 DOF. Marbling score was not different (P = 0.14) between harvest groups; however, the opportunity to grade USDA Premium Choice was improved for steers fed to 185 DOF. Calculated YG and 12th rib fat thickness increased linearly (P < 0.01) as DOF increased, with distributions across YG 1 through 5 differing between harvest groups (P < 0.01), and 185-d carcasses having the greatest frequency of YG 4 carcasses. As cattle are fed for additional DOF, live ADG and G:F decline, while HCW and LM area increase.

Interaction of Sweet Bran inclusion and corn processing method in beef finishing diets.

The study objective was to determine the effects of corn processing method and Sweet Bran (Cargill, Blair, NE) inclusion in beef finishing diets on performance and carcass characteristics. Four hundred and eighty crossbred yearling steers (363 ±â€…15 kg) were assigned to a 2 × 3 factorial arrangement of treatments, consisting of two corn processing methods, steam-flaked corn (SFC) or a high-moisture corn: dry-rolled corn blend (HMC: DRC), and three inclusions of Sweet Bran (0%, 20%, or 40% of diet dry matter). Data were analyzed using the MIXED procedure of SAS as a generalized block design with pen as the experimental unit and block as a fixed effect. Dry matter intake increased linearly as Sweet Bran increased in the diet, regardless of corn processing method (P < 0.01). A corn processing × Sweet Bran interaction (P < 0.01) was observed for feed efficiency (G:F), average daily gain (ADG), and hot carcass weight (HCW). The G:F of steers fed SFC did not change with increasing Sweet Bran concentrations (P = 0.19) and the G:F of SFC-fed steers was 12.4% greater than those fed HMC:DRC without Sweet Bran, but was only 5.3% greater when Sweet Bran was included at 40% (P = 0.04). The ADG of steers increased linearly with increasing concentration of Sweet Bran in both SFC and HMC:DRC-based diets. However, the interaction occurred (P < 0.01) because ADG increased at a greater rate in HMC:DRC-based diets (1.93 to 2.21 kg/d for 0% and 40% Sweet Bran, respectively) compared to SFC-based diets (2.18 to 2.27 kg/d for 0% and 40% Sweet Bran, respectively;). Accordingly, while the ADG of steers fed SFC was 13% greater than steers fed HMC:DRC without Sweet Bran (P < 0.01), there was no difference in ADG due to corn processing method at 40% Sweet Bran (P = 0.30). In SFC-based diets, HCW tended to increase from 446 to 455 kg as Sweet Bran increased (P = 0.06). In HMC: DRC-based diets, HCW linearly increased from 421 to 449 kg (P < 0.01), resulting in similar HCW at 40% Sweet Bran (P = 0.28). These data suggest HMC:DRC-based diets are more competitive with SFC-based diets due to similar gains and more similar feed efficiencies when Sweet Bran is fed.

Mineral composition of serially slaughtered Holstein steers supplemented with zilpaterol hydrochloride.

Calf-fed Holstein steers (n = 115; 449 ± 20 kg) were utilized in a serial harvest experiment. A baseline group of five steers was harvested after 226 d on feed (DOF), which was designated day 0. The remaining cattle were assigned randomly to 11 harvest groups, with slaughter every 28 d. Cattle were either not (CON) or were fed zilpaterol hydrochloride for 20 d followed by a 3 d withdrawal (ZH). There were five steers per treatment in each slaughter group ranging from days 28 to 308. Whole carcasses were divided into lean, bone, internal cavity, hide, and fat trim components. Apparent mineral retention (Ca, P, Mg, K, and S) within the body was calculated as the difference between mineral concentration at slaughter and day 0. Mineral concentration at day 0 was determined from body composition of steers harvested at day 0 multiplied by individual live body weight (BW) at day 0. All data were analyzed as a 2 × 11 factorial arrangement with individual animal as the experimental unit. Orthogonal contrasts were used to analyze linear and quadratic contrasts over time (11 slaughter dates). There were no differences in concentration of Ca, P, and Mg in bone tissue as feeding duration increased (P ≥ 0.89); concentration of K, Mg, and S in lean tissue did fluctuate across DOF (P < 0.01). Averaged across treatment and DOF, 99% of Ca, 92% of P, 78% of Mg, and 23% of S present in the body were in bone tissue; 67% of K and 49% of S were in lean tissue. Expressed as gram per day, apparent retention of all minerals decreased linearly across DOF (P < 0.01). Expressed relative to empty body weight (EBW) gain, apparent Ca, P, and K retention decreased linearly as BW increased (P < 0.01) whereas Mg and S increased linearly (P < 0.01). Apparent retention of Ca was greater for CON cattle (greater bone fraction) and apparent retention of K was greater for ZH cattle (greater muscle fraction) when expressed relative to EBW gain (P ≤ 0.02), demonstrating the increase in lean gain by ZH cattle. There were no differences in apparent retention of Ca, P, Mg, K, or S due to treatment (P ≥ 0.14) or time (P ≥ 0.11) when expressed relative to protein gain. Apparent retention averaged 14.4 g Ca, 7.5 g P, 0.45 g Mg, 1.3 g K, and 1.0 g S/100 g protein gain. Expressing apparent mineral retention on a protein gain basis minimized effects of rate and type of gain, allowing for better comparison across treatments and time. Feeding zilpaterol hydrochloride did not affect apparent mineral retention when expressed relative to protein gain.

Mineral requirements for feedlot cattle are largely based on measured mineral concentration in the body at harvest. Fairly extensive research has been done quantifying Ca and P in the body of cattle, but data on Mg, K, and S are sparse. Serial harvest experiments are expensive and labor intensive and therefore not conducted frequently. A group of 115 Holstein steers was fed a finishing diet with serial harvest every 28 d. Two treatments were evaluated, control and cattle fed zilpaterol hydrochloride to increase lean tissue growth. Every 28 d, five steers from each treatment group were harvested with the whole carcass divided into lean, bone, internal cavity, hide, and fat trim components. Apparent mineral retention was calculated as the difference between mineral composition at day 0 (baseline harvest group) and each 28 d harvest group. Averaged across treatment and days on feed, 99% of Ca, 92% of P, 78% of Mg, and 23% of S present in the body were measured in bone tissue; 67% of K and 49% of S were in lean tissue. Apparent retention averaged 14.4 g Ca, 7.5 g P, 0.45 g Mg, 1.3 g K, and 1.0 g S/100 g protein gain.

Impact of shade in beef feedyards on performance, ear temperature, and heat stress measures.

A 2-yr study (year 1: March to September 2017; year 2: February to August 2018) was conducted using crossbred steers (year 1: n = 1677; initial body weight [BW] = 372 kg, SD = 47; year 2: n = 1713; initial BW = 379 kg, SD = 10) in a commercial feedyard study in Eastern NE to determine the effects of shade on cattle performance, ear temperature, and cattle activity. Two treatments were evaluated using a randomized complete block design (n = 5 blocks based on arrival). Treatments were assigned randomly to pens and consisted of five pens without shade (NO SHADE) and five pens with shade (SHADE). Ear temperatures were collected throughout the trials using biometric sensing ear tags on a subset of cattle. Panting scores were collected using a 5 point scale determined visually based on the level of panting occurring on the same subset of steers a minimum of twice weekly from June 8 to August 21 in year 1 and May 29 to July 24 in year 2 by one trained individual each year. In year 1, no differences (P ≥ 0.24) were observed for growth performance or carcass characteristics. Dry matter intake (DMI) and average daily gain (ADG) were greater (P ≤ 0.04) for SHADE cattle in year 2. Over the entire feeding period in year 1, greater (P < 0.01) ear temperature was observed for NO SHADE cattle, but cattle movement was not different (P = 0.38) between treatments. When evaluating the entire feeding period in year 2, cattle movement and ear temperature were not different (P ≥ 0.80) between treatments. Cattle in the SHADE treatment had lower (P ≤ 0.04) panting scores in years 1 and 2. These data suggest that providing shade can lessen the negative influence of heat events on DMI and was an effective way to reduce heat stress in feedlot operations, but only impacted ADG if heat events were close to the cattle slaughter date.

This study was performed over two separate summers to evaluate natural exposure to heat and quantify the impact that providing shade has on stress measures, estimates of body temperature, and feedlot performance. In the first year, cattle were marketed after summer heat events and while ear temperature and panting scores were decreased for cattle in shaded pens, the effect was not significant enough to influence performance parameters. In the second year when cattle were marketed more immediately following heat impacts, cattle fed in shaded pens consumed more feed and gained more weight than cattle fed in pens without shade. In both years, cattle decreased dry matter intakes to offset normal heat events.

Evaluation of growth performance, carcass characteristics, and methane and CO2 emissions of growing and finishing cattle raised in extensive or partial-intensive cow-calf production systems.

An experiment was conducted over 2 yr to measure performance and greenhouse gas (GHG) emissions of weaned calves from two cow-calf production systems. Crossbred steers and heifers (n = 270, initial body weight (BW) = 207 kg, SD = 35) were used in a randomized complete block design, with treatments applied to the cow-calf system. Treatments were: 1) a traditional system consisting of April to June calving with smooth bromegrass pasture and grazed corn residue as forage resources (TRAD); 2) an alternative system consisting of July to September calving utilizing partial-drylot feeding, summer-planted oats, and corn residue grazing (ALT). Calves from both production systems were weaned at the same age and grown (diet NEg = 1.05 Mcal kg-1) for approximately 117 d. The calves then transitioned to a high-grain finishing diet (year 1: NEg = 1.32 Mcal kg-1; year 2: NEg = 1.39 Mcal kg-1) and fed to a targeted 1.52 cm backfat. Growth performance in the grower phase resulted in greater (P < 0.01) average daily gain (1.39 vs. 1.22 ± 0.02 kg), greater gain:feed (P < 0.01; 0.157 vs. 0.137 ± 0.003) for ALT calves compared to TRAD calves, However, a lower initial BW (P < 0.01; 185 vs. 229 ± 4.9 kg) resulted in a lower ending BW (P < 0.01; 347 vs. 371 ± 2.9 kg) for ALT calves compared to TRAD calves in spite of improved growth performance. In the finisher phase, ALT calves gained less (1.52 vs. 1.81 ± 0.218 kg; P = 0.02), were less efficient (0.139 vs. 173 ± 0.0151; P = 0.01) but exhibited similar hot carcass weights (HCW) (388 vs. 381 ± 3.8 kg; P = 0.14) compared to TRAD calves. Each pen of calves was put into a large pen-scale chamber that continuously measured carbon dioxide (CO2) and methane (CH4) for 5 d during the grower and finisher phases. The average CH4 and CO2 production per unit of feed intake was used to calculate total GHG emissions over the entire grower and finisher phase. Overall, there were no differences (P ≥ 0.17) between treatments for CH4 per day and per kilogram dry matter intake (DMI). However, ALT calves tended to produce less (P ≤ 0.10) CO2 per day and per kilogram DMI than TRAD calves. Overall, methane emissions were greater in ALT calves (110.7 vs. 92.2 ± 8.3 g CH4 kg-1 HCW; P = 0.04) than TRAD calves. The ALT calves required 27 additional days on feed to market, which resulted in more total CH4 per animal across the entire feeding period (P = 0.02) than TRAD calves. Production systems that reduce days to market to achieve similar HCW may reduce GHG emissions.

There are many reasons (i.e. drought, limited perennial forage, calving) for using intensive or partially intensive production practices (e.g. drylotting or confinement) in a cow-calf enterprise. These practices may impact subsequent calf growth and feedlot performance. In addition, limited data are available comparing the environmental impacts (i.e., greenhouse gas (GHG) emissions) from different cow-calf production systems. This experiment evaluated the effects of a partial-intensive cow-calf production system on post-weaning calf growth performance, carcass characteristics, and GHG emissions. Calves from the partial-intensive cow-calf system had improved growth compared to calves from the extensive cow-calf system during the grower phase. During finishing, calves from the partial-intensive cow-calf system had poorer growth performance resulting in calves from the partial-intensive cow-calf system requiring an additional 27 d on feed to reach finish as calves from the traditional cow-calf system. These differences are likely due to compensation from lower gain periods resulting in better gain in the subsequent growth period. Cow-calf production system did not alter methane and carbon dioxide emissions per kilogram of intake. However, because calves in the partial-intensive cow-calf system required additional days on feed, absolute methane and carbon dioxide emissions were greater per animal for the partial-intensive cow-calf system compared to the extensive cow-calf system suggesting that reducing days to market may reduce emissions from beef systems.

Effect of increasing corn silage inclusion in finishing diets cattle with or without tylosin on performance and liver abscesses.

A pooled analysis was performed to evaluate whether corn silage fed at 15% or 45% of diet DM impacted liver abscesses prevalence at slaughter in five previous experiments. Cattle fed 15% corn silage had 7.8% abscessed livers compared to 4.1% for cattle fed 45% corn silage when all diets contained tylosin. While improved due to increased corn silage inclusion, the objective of the current finishing study was to determine the impact of silage inclusion in finishing diets with and without tylosin on performance and incidence of abscessed livers in beef cattle. A total of 640 (BW = 334 ± 25 kg) steers were used in a generalized randomized block design with a 2 × 2 factorial treatment design. Treatments included two concentrations of corn silage (15% and 45% of diet DM), with or without tylosin for liver abscesses. This study used 32 pens of cattle with 20 steers per pen and 8 pens per treatment. There was a tendency for an interaction for feed efficiency (G:F; P = 0.10) where cattle fed 15% corn silage had a 2% increase in G:F when tylosin was added to the diet, but no improvements in G:F were observed when tylosin was added to diets containing 45% silage. There was an interaction between silage and tylosin inclusion for abscessed livers (P = 0.05). Cattle fed 15% corn silage without tylosin had the greatest incidence of abscessed livers (34.5%) compared to other treatments (P = 0.05), and the incidence of abscessed livers was decreased to 19% if tylosin was fed with 15% corn silage. Feeding 45% silage was effective at lowering the incidence of abscessed livers (P = 0.05) which was 12.4%, regardless of whether tylosin was fed. Feeding corn silage at 45% of diet DM (77.5% concentrate) was as effective as feeding tylosin to cattle on a 92.5% concentrate diet. Feeding corn silage at greater inclusions decreased daily gain (P ≤ 0.01) but increased final body weight when fed to an equal fatness (cattle fed 45% CS were fed 28 d longer). Feeding corn silage at 45% was more economical compared to feeding 15% corn silage, especially as corn prices increase, provided shrink is well managed. Feeding elevated concentrations of corn silage may be an economically viable method to reduce incidence of liver abscesses without antibiotic use for smaller operations that can manage more corn silage in finishing diets.

Antibiotics are a very effective method to control liver abscesses for finishing cattle, which are thought to be due to high starch concentration and acidosis. Dietary roughage (forage) is used to control acidosis. As grain prices increase, feeding greater amounts of corn silage may be advantageous and silage can be an economical forage compared to other traditional forages like alfalfa. This study evaluated the impact of corn silage inclusion on performance and abscessed livers with and without the addition of antibiotics. As expected, feeding more corn silage decreased both gain and feed efficiency but also increased profitability. Feeding tylosin with a traditional inclusion of silage (15%) decreased abscessed livers from 34.5% to 19%. However, if cattle are fed more silage (45%) the incidence of abscessed livers was 12.4%, regardless of feeding tylosin or not.

Impact of different corn milling methods for high-moisture and dry corn on finishing cattle performance, carcass characteristics, and nutrient digestion.

Two experiments were conducted to evaluate the effect of different corn milling methods for high-moisture and dry corn on finishing cattle performance, carcass traits, and nutrient digestion. In experiment 1, steers (N = 600 [60 pens]; initial body weight [BW] = 402 ± 17 kg) were fed for 134 d to evaluate the effect of milling method and corn type on performance and carcass characteristics. Treatments were evaluated as a 2 × 3 factorial design with factors being milling method (Automatic Ag roller mill [ROLL] or hammer mill [HAMMER]) and corn type (high-moisture [HMC], dry [DC], or 50:50 blend of HMC and DC [BLEND]). There were no milling method × corn type interactions for final BW, gain (ADG), or dry matter intake (DMI; P ≥ 0.32), but there tended to be an interaction for G:F (P = 0.09). Cattle fed ROLL HMC had 4.7% greater gain:feed (G:F; P ≤ 0.01) with 55% lower fecal starch (P < 0.01) compared to HAMMER HMC, whereas processing did not impact (P = 0.74) G:F in DC diets. There were no further effects (P ≥ 0.14) on performance or carcass traits regardless of milling method or corn type. In experiment 2, seven ruminally fistulated steers were utilized in a 4 × 7 incomplete Latin rectangle to evaluate the effects of DC or HMC processed with either ROLL or HAMMER (2 × 2 factorial treatment design) on nutrient digestion. Feeding HMC decreased the amount of excreted dry matter (DM) and organic matter (OM; P ≤ 0.01) regardless of mill type, but there was a tendency (P ≤ 0.13) for an interaction between corn type and mill type for DM and OM digestibility. There was no difference between milling treatments fed as HMC (P ≥ 0.69), but the HAMMER DC diet was more digestible than the ROLL DC (P = 0.05). As expected, HMC-based diets had greater (P < 0.01) starch digestibility compared to DC, but milling method had no impact on starch digestibility (P = 0.56). There were no differences (P = 0.56) in average ruminal pH, but HMC diets had greater variance (P = 0.04) and greater area less than pH 5.6 (P = 0.05) compared to DC based diets while milling method did not impact either (P > 0.33). Processing HMC with a roller mill improved G:F compared to processing with a hammer mill, but had little effect when corn was fed as dry corn or HMC:DC blend. Furthermore, feeding cattle HMC compared to DC increases nutrient digestibility, but milling method had little impact.

Two experiments tested how processing of corn grain for finishing cattle influences growth performance and nutrient digestion. Producers can use corn in dry or high-moisture form but normally use either a hammer mill or roller mill. When using high-moisture corn, we observed a 5% improvement in gain:feed (G:F) for rolling as compared to hammer milling, which is likely due to more uniform particle size and improved digestion. Unlike the performance study, milling method did not impact digestion for high-moisture corn. Using a hammer-mill for dry corn improved digestion compared to rolling which was not supported by improved performance in the finishing study. Using high-moisture corn increases risk of ruminal acidosis compared to dry corn, but also improves feed efficiency if acidosis can be minimized.

Pooled analysis on the effects of inclusion, moisture, and oil removal from distillers grains on cattle performance and economic returns in diets with different corn processing.

A synthesis of data including over 9,300 head of cattle and over 980 pen means was conducted to evaluate the effect of corn processing method, distillers grains type, oil removal from distillers, and dietary distillers concentration on cattle performance and total feeding costs under different historical price scenarios. The corn processing method was either steam-flaked corn, high-moisture or dry-rolled corn or a blend of the latter two and their effects on performance with and without distillers grains. Wet, modified, and dry distillers were analyzed as either full fat or de-oiled products in diets at various dietary concentrations with either corn type to determine cattle performance. Performance estimates were used to determine the inclusion level that minimized total finishing costs ($/head) for each diet given various assumptions on corn price, corn-to-distillers price ratio, supplemental protein cost, and steam flake processing cost. Feeding distillers grains in steam-flaked or high-moisture and dry-rolled corn diets resulted in improved feed conversion and reduced cattle feeding costs, including lower supplemental protein costs and lower total feeding costs compared with a diet without distillers. However, feeding diets with steam-flaked corn improved feed conversion regardless of distillers type or level of inclusion. Feeding full fat distillers improved feed conversion relative to de-oiled distillers. Cattle fed de-oiled distillers were more efficient than those fed diets containing no distillers grains. At all corn price and corn-to-distillers price ratios examined, feeding some level of distillers of any type produced a lower total feeding costs relative to a diet without distillers. Different robustness tests were conducted to determine the impact of varying steam flake corn processing costs and the cost of supplemental protein on the optimal level of distillers inclusion level. The break-even cost a producer could pay for steam-flaking corn varied but was significantly higher when corn price was high. Feeding distillers grains in steam-flaked or high-moisture and dry-rolled corn diets resulted in improved feed efficiency, reduced cattle feeding costs, including replacement of other supplemental protein and associated costs compared to a diet without distillers grains.

A pooled analysis of research was conducted to evaluate the effect of corn processing method, distillers grains type, oil removal from distillers, and distillers inclusion on cattle performance within studies conducted at the University of Nebraska-Lincoln between 1992-2020. Two corn processing methods were included in the dataset, steam-flaked corn (SFC) or any combination of high-moisture (HMC) and dry-rolled corn (DRC), fed with and without distillers gains, a by-product of the dry milling ethanol industry. Distillers products were either wet, modified, or dry distillers grains plus solubles and were analyzed as both full fat and de-oiled products. Cattle performance resulting from feeding the six by-product combinations with both corn types was analyzed and then used to find the inclusion level that minimized the total feeding cost ($/head) given different corn prices and corn-to-distillers price ratios. Cattle had improved feed conversion when fed SFC compared with HMC:DRC in all diets. Cattle fed full-fat distillers grains had slightly improved feed conversions compared with de-oiled distillers grains. Cattle fed distillers grains diets had improved feed conversion compared with cattle fed control diets without distillers. Overall, feeding distillers grains in combination with either corn type offers benefits including improved feed conversions, lower finishing costs, and reduced reliance on supplemental protein sources compared to a diet without distillers.

The effect of corn silage hybrid and inclusion on performance of finishing steers and silage hybrid effects on digestibility and performance of growing steers.

Three experiments evaluated the effects of three corn silage hybrids, inclusion, and nutrient digestibility in growing and finishing diets. The three hybrids tested included a control (CON), a hybrid containing a brown midrib (bm3) trait (BM3), and an experimental bm3 hybrid with the soft endosperm trait (BM3-SOFT). Experiment 1 utilized 360 crossbred steers (body weight [BW] = 334; SD = 25 kg) to evaluate inclusion of silage in a finishing diet at (15% or 45% of diet dry matter [DM]) and silage hybrid (CON, BM3, or BM3-SOFT). Experiment 2 and 3 utilized 216 crossbred steers (BW = 324; SD = 10 kg) and six ruminally fistulated steers (BW = 274; SD = 27 kg), respectively, to evaluate effects of either CON, BM3, or BM3-SOFT silage hybrids on performance and nutrient digestibility in growing diets. In Exp. 1, there was a silage inclusion × hybrid interaction for average daily gain (ADG) and gain-to-feed ratio (G:F). All treatments with 15% silage had greater (P ≤ 0.04) ADG and G:F compared with 45% silage. Cattle fed BM3-SOFT had greater ADG and G:F than cattle fed CON or BM3 when silage was included at 15% of the diet. When silage was fed at 45% of the diet DM, ADG did not differ between cattle fed either bm3 hybrid. Cattle fed BM3 had the greatest G:F (P < 0.01), with no difference between BM3-SOFT and CON. At 15% silage inclusion, hot carcass weight (HCW) was greater (P < 0.01) for cattle fed BM3-SOFT compared with cattle fed CON and BM3 but did not differ between cattle fed BM3 and CON. At 45% silage inclusion, steers fed either bm3 hybrid did not differ in HCW but were both heavier (P < 0.01) compared with cattle fed CON. In Exp. 2, ending BW, dry matter intake (DMI), and ADG were greater (P < 0.01) for steers fed either bm3 hybrid compared to steers fed the CON, but not different between steers fed the bm3 hybrids. There were no differences (P = 0.26) in G:F between the silage hybrids. In Exp. 3, steers fed either bm3 had greater (P < 0.01) neutral detergent fiber (NDF) and acid detergent fiber (ADF) digestibility than steers fed the CON. Ruminal pH was lower (P < 0.01), and total volatile fatty acid (VFA) concentration was greater (P < 0.01) for steers fed bm3 hybrids compared to steers fed CON. Feeding silage with the bm3 trait improved fiber digestibility, which increased DMI and subsequent ADG in high-forage growing diets. Feeding corn silage with the bm3 trait improved performance compared to non-bm3 corn silage when included above typical roughage concentration.

Evaluation of the effects of wood-sourced biochar as a feedlot pen surface amendment on manure nutrient capture.

Feedstuffs utilized in U.S. feedlot finishing rations incorporate high concentrations of N and P, with less than 15% of fed N and P retained by the animal. The remaining N and P are excreted in the manure, where the opportunity for manure N loss via ammonia (NH3) volatilization from the feedlot pen surface is a risk to the environment and lowers the value of manure as a fertilizer. Two nutrient mass balance experiments were conducted during the winter and summer seasons to evaluate the effects of spreading unprocessed Eastern red cedar biochar onto the feedlot pen surface on manure nutrient capture and cattle performance. A 186-d feedlot finishing experiment was conducted from December to June (WINTER) and a subsequent 153-d finishing experiment was conducted from June to November (SUMMER). The WINTER experiment evaluated three treatments (5 pens per treatment; 10 steers per pen), including biochar spread on pen surface during the feeding period (1.40 kg biochar/m2; 17.6 m2/steer soil surface of the pen), hydrated lime spread on pen surface at end of feeding period (1.75 kg/m2) and control (no treatment applied). The SUMMER experiment evaluated biochar treatment (1.40 kg biochar/m2; 5 pens per treatment; 8 steers per pen; and 22 m2/steer soil surface of the pen) against control. There were no differences in N and P intake, retention, or excretion (P ≥ 0.38) between WINTER treatments. Steer performance (P ≥ 0.10) and carcass characteristics (P ≥ 0.50) were not impacted by pen treatment in WINTER. Nitrogen and P intake and excretion (P ≥ 0.35) were not different between treatments in SUMMER and retention of N and P was significantly greater for the biochar treatment (P ≤0.04) due to greater ADG (P = 0.05). There was no difference in DMI (P = 0.48) in SUMMER, steers on biochar pen treatment had heavier HCW (P = 0.05) and greater ADG, resulting in a tendency for greater feed efficiency (P = 0.08). In both experiments, biochar addition to the pen surface tended (P = 0.07) to increase manure N as a percent of manure DM, but this increase in N concentration did not impact kg of N removed from the feedlot pens (P ≥ 0.15) or N losses (P ≥ 0.68). The addition of red cedar biochar to the feedlot pen surface did not increase manure nutrient capture of N or P and did not reduce N losses associated with soil-based feedlot pens.

Production cow-calf responses from perennial forage-based and integrated beef-cropping systems.

An experiment was conducted to measure production responses of an alternative cow-calf production system integrated into a cropping system without access to perennial forage compared to a traditional cow-calf system utilizing perennial forage. Multiparous, cross-bred beef cows (n = 160; average age = 6.2 ± 2.8 yr) were utilized in a randomized complete block experimental design and unstructured treatment design. Upon initiation, cows were blocked by age and stratified by source, assigned randomly to one of two production systems, each with four replicates (n = 20 cows/replicate). Once allotted to their treatment groups, cows remained in their experimental units for the duration of the experiment. Treatments were: 1) a traditional system consisting of April to May calving with smooth bromegrass pasture and grazed corn residue as forage resources (TRAD); 2) an alternative system consisting of July to August calving utilizing partial-drylot feeding, summer-planted oats, and corn residue grazing (ALT). There were no differences (P ≥ 0.27) in calving rates (91.8 vs. 86.7 ± 2.92%), pregnancy rates (89.3 vs. 89.9 ± 2.66%), and weaning rates (87.2 vs. 82.3 ± 3.29%) for TRAD vs. ALT, respectively. However, there was an increase (P = 0.04) in the rate of twin offspring in ALT (2.9 vs. 9.4 ± 2.36% for TRAD vs. ALT, respectively). One calf from the set of twins was selected randomly at birth to be removed from the experiment, so the production data are only from single calves. There was no difference (P = 0.47) in calf body weight at birth (40 vs. 39 ± 0.7 kg for TRAD vs. ALT, respectively). At weaning, calves in the ALT system were lighter (P < 0.01) at the same day of age (184 vs. 229 ± 5.5 kg) compared to TRAD calves. Cows from the ALT system had fewer (P < 0.01) kg weaned per cow exposed to bull (150 vs. 199 ± 7.2 kg) compared to TRAD cows. Apart from the twinning rate, no differences in reproductive performance were observed among systems. However, reduced weaning weights and kilogram of weaned calf per cow exposed may negatively impact revenue to the cow-calf enterprise of the ALT system.

Individual Beef Cattle Identification Using Muzzle Images and Deep Learning Techniques.

Individual feedlot beef cattle identification represents a critical component in cattle traceability in the supply food chain. It also provides insights into tracking disease trajectories, ascertaining ownership, and managing cattle production and distribution. Animal biometric solutions, e.g., identifying cattle muzzle patterns (unique features comparable to human fingerprints), may offer noninvasive and unique methods for cattle identification and tracking, but need validation with advancement in machine learning modeling. The objectives of this research were to (1) collect and publish a high-quality dataset for beef cattle muzzle images, and (2) evaluate and benchmark the performance of recognizing individual beef cattle with a variety of deep learning models. A total of 4923 muzzle images for 268 US feedlot finishing cattle (>12 images per animal on average) were taken with a mirrorless digital camera and processed to form the dataset. A total of 59 deep learning image classification models were comparatively evaluated for identifying individual cattle. The best accuracy for identifying the 268 cattle was 98.7%, and the fastest processing speed was 28.3 ms/image. Weighted cross-entropy loss function and data augmentation can increase the identification accuracy of individual cattle with fewer muzzle images for model development. In conclusion, this study demonstrates the great potential of deep learning applications for individual cattle identification and is favorable for precision livestock management. Scholars are encouraged to utilize the published dataset to develop better models tailored for the beef cattle industry.

Impact of Feeding Syngenta Enogen® Feed Corn Compared to Control Corn in Different Diet Scenarios to Finishing Beef Cattle.

The objective of this pooled statistical analysis was to evaluate Syngenta Enogen® Feed Corn (EFC) versus conventional corn (CON) when fed as either dry-rolled corn (DRC) or high-moisture corn (HMC) for effects on finishing beef cattle performance and carcass characteristics. Corns were evaluated in diets with byproduct inclusion rates of 0, 15, 18, 20, and 30% distiller grains or 25 and 35% Sweet Bran® (a commercial corn gluten feed product). Seven trials (n = 1856) consisting of 200 pen means comparing 26 diet treatments were analyzed using regression in a pooled analysis. When EFC was processed as DRC, the gain efficiency (G:F) improved compared with CON, but the response to feeding EFC decreased from a 4.8% improvement to no improvement compared to CON as distiller grains increased from 0 to 30%, but was significantly improved due to feeding EFC in diets with 0 to 18% distiller grains. Feeding cattle EFC as DRC increased the average daily gain (ADG) and G:F by 4.5% compared with CON corn in diets containing Sweet Bran®. No improvements in animal performance were observed when cattle were fed EFC compared to CON when processed as HMC in any situation. Feeding Enogen® corn improved the gain efficiency of finishing cattle compared with conventional corn when processed as dry-rolled corn and fed in diets with less than 20% distillers or diets that include Sweet Bran®.

Effects of replacing wet distillers grains with supplemental SoyPass in forage-based growing cattle diets.

One hundred twenty individually fed steers (initial BW 283 kg ± 32) were utilized in an 84-d growing trial to evaluate the effects of increased metabolizable lysine from non-enzymatically browned soybean meal (SoyPass) in grass hay-based diets containing wet distillers grains plus solubles (WDGS). The treatments were arranged as a 2 × 3 factorial with two levels of protein supplement as 20% (low; DL20) or 35% (high; DL35) of dietary DM using WDGS as the basal protein source, and three increments of SoyPass (SP) replacing 0%, 30%, or 60% of the WDGS DM in the protein supplement yielding six dietary treatments. Average daily gain (ADG), dry matter intake (DMI), gain:feed (G:F), and plasma urea N (PUN) data were analyzed using the MIXED procedure of SAS as a 2 × 3 factorial. Animal was the experimental unit and fixed effects included body weight block, dietary inclusion of distillers grains (DL20, DL35), dietary inclusion of SoyPass (SP) (3 levels), and DL × SP inclusion interactions. Linear and quadratic interactions between DL and SP inclusion were analyzed using covariate regression. No interactions were detected for ADG between SP and DL (P = 0.76). Additionally, SP had no effect on ADG (P = 0.49). However, ADG was increased for steers consuming the DL35 diet compared to DL20 (1.13 vs. 0.86 kg/d, respectively; P < 0.01). A DL × SP interaction was detected for DMI (P = 0.01). As SP replaced WDGS in the DL35 diet, DMI increased linearly from 8.10 to 8.93 kg/d (P = 0.02). In the DL20 diet, DMI was not different as SP replaced WDGS (P ≥ 0.11). Therefore, G:F tended to decrease linearly (P = 0.06) as SP replaced WDGS in the DL35 diet, while no difference (P ≥ 0.11) was detected in the DL20 diet, suggesting SP contained less energy than WDGS but did improve dietary lysine balance. Furthermore, plasma urea nitrogen (PUN) increased linearly as SP replaced WDGS in the DL20 diet (P < 0.01) but was not affected by SP substitution in the DL35 diet (P ≥ 0.19). When WDGS is fed at a low (20% DM) or high (35% DM) inclusion rate in a forage-based diet, replacing the distillers with a source of protected amino acids supplied through heat-treated soybean meal, did not improve performance. A more concentrated or energy-dense form of amino acids may be beneficial in forage-based growing cattle diets containing 20% distillers grains but is not needed in diets with 35% distillers grains.

Evaluation of methane production manipulated by level of intake in growing cattle and corn oil in finishing cattle.

Growing crossbred steers [n = 80, initial body weight (BW) = 274 kg, SD = 21] were used to evaluate the effect of ad libitum and limit-fed intakes on methane (CH4) production. Two treatments with four pens per treatment (10 steers per pen) were evaluated in a randomized block designed experiment, with BW as a blocking factor. Treatments included feeding the same diet at ad libitum intake or limit fed at 75% of ad libitum intakes. Diet consisted of 45% alfalfa, 30% sorghum silage, 22% modified distillers grains plus solubles, and supplement at 3% on a dry matter (DM) basis. This trial was followed by a finishing trial (n = 80; initial BW = 369 kg; SD = 25) to evaluate the effects of dietary corn oil on CH4 production. Two treatments with four pens per treatment (10 steers per pen) were used in a randomized complete block designed experiment. Cattle were rerandomized and blocked by BW within the previous treatment. Treatments consisted of a control diet (CON) containing 66% corn, 15% wet distillers grains plus solubles, 15% corn silage, and 4% supplement (DM basis). Corn oil treatment (OIL) displaced 3% corn by adding corn oil. Methane was collected in two pen-scale chambers by collecting air samples continuously from pens by rotating every 6 min with an ambient sample taken between pen measurements. Steers fed ad libitum had greater DM intake (DMI) by design and greater average daily gain (ADG; P < 0.01) compared to limit-fed cattle; however, feed efficiency was not different between treatments (P = 0.40). Cattle fed ad libitum produced 156 g/d of CH4, which was greater (P < 0.01) than limit-fed cattle (126 g per steer daily). In the finishing trial, BW, gains, and carcass traits were not impacted by treatment (P ≥ 0.14). Feed efficiency (P = 0.02) improved because intakes decreased (P = 0.02) by feeding OIL compared to CON. Daily CH4 production was less (P = 0.03) for OIL-fed cattle (115 g per steer daily) compared to CON-fed cattle (132 g per steer daily). Methane was reduced (P < 0.01) by 17% for OIL-fed cattle compared to CON-fed cattle when expressed as grams of CH4 per kilogram of ADG. Feeding corn oil at 3% of diet DM reduced enteric CH4 production (grams per day) by 15%, which was only partially explained by a 3% decrease in DMI. Overall, a decrease in CH4 was observed when intake is limited in growing cattle and when corn oil is added in finishing diets.

Influence of host genetics in shaping the rumen bacterial community in beef cattle.

In light of recent host-microbial association studies, a consensus is evolving that species composition of the gastrointestinal microbiota is a polygenic trait governed by interactions between host genetic factors and the environment. Here, we investigated the effect of host genetic factors in shaping the bacterial species composition in the rumen by performing a genome-wide association study. Using a common set of 61,974 single-nucleotide polymorphisms found in cattle genomes (n = 586) and corresponding rumen bacterial community composition, we identified operational taxonomic units (OTUs), Families and Phyla with high heritability. The top associations (1-Mb windows) were located on 7 chromosomes. These regions were associated with the rumen microbiota in multiple ways; some (chromosome 19; position 3.0-4.0 Mb) are associated with closely related taxa (Prevotellaceae, Paraprevotellaceae, and RF16), some (chromosome 27; position 3.0-4.0 Mb) are associated with distantly related taxa (Prevotellaceae, Fibrobacteraceae, RF16, RFP12, S24-7, Lentisphaerae, and Tenericutes) and others (chromosome 23; position 0.0-1.0) associated with both related and unrelated taxa. The annotated genes associated with identified genomic regions suggest the associations observed are directed toward selective absorption of volatile fatty acids from the rumen to increase energy availability to the host. This study demonstrates that host genetics affects rumen bacterial community composition.

Diurnal and dietary impacts on estimating microbial protein flow from urinary purine derivative excretion in beef cattle.

Two experiments were conducted to determine the effects of diet composition and time of urine spot sampling on estimates of urinary purine derivative (PD) excretion. In Exp. 1, 116 individually fed crossbred heifers (407 ± 32 kg) were arranged in a randomized block design (82 d). Treatments were arranged in a 2 × 3 factorial design, with two urine spot sample collection times (0700 and 1700 hours; AM and PM) and three diets: 85% steam-flaked corn (SFC); 85% SFC + 1.5% urea (UREA); or 25% SFC, 30% wet corn gluten feed, and 30% corn bran (BYPROD). In Exp. 2, six ruminally and duodenally fistulated steers (474 ± 37 kg) were arranged in a replicated 3 × 3 Latin square design, with dietary treatments identical to Exp. 1 (63 d). Treatment diets were selected to result in varied amounts of microbial crude protein (MCP) in order to evaluate the accuracy of using estimates of urinary PD excretion to predict MCP. Urine spot samples were collected at 0700, 1200, 1700, and 2200 hours. No urine collection time × diet interactions occurred (P > 0.20) for any variable in either experiment. In Exp. 1, dry matter intake (DMI) was greatest with BYRPOD (10.40 kg/d) and lowest with SFC (7.90 kg/d; P < 0.05). Feed efficiencies were greatest for UREA (0.182) and least for SFC (0.141; P < 0.05). Urinary PD:creatinine (PD:C) ratio was greatest for BYPROD (1.25) and least for SFC (0.94; P < 0.05). Urine spot sampling time had a significant (P < 0.05) impact on PD:C, 1.03 for AM and 1.22 for PM samples. In Exp. 2, DMI was greater (P < 0.05) with BYPROD than with SFC and tended (P = 0.07) to be greater with BYPROD than with UREA. Ruminal pH was greatest for BYPROD (5.94; P < 0.05). Flow of MCP was 636, 829, and 1,056 g/d for SFC, UREA, and BYPROD, with BYPROD being greater (P < 0.05) than SFC and tending (P = 0.06) to be greater than UREA. Urinary PD:C was greater (P < 0.05) for BYPROD than SFC and tended (P = 0.09) to be greater for UREA than SFC. Urinary PD:C increased linearly (P < 0.05) with sampling time. Diets formulated to affect DMI and MCP flow resulted in differences in urinary PD excretion, and these results related well with MCP flow estimated from duodenal purines. Collecting spot samples of urine later in the day resulted in greater estimates of urinary PD excretion; purine and PD flows appear to increase with time after one morning feeding per day. This method is well suited to evaluating relative differences between treatments but should not be extrapolated to assume absolute values.

A pooled analysis of six large-pen feedlot studies: effects of a noncoated initial and terminal implant compared with a single initial and delayed-release implant on arrival in feedlot heifers.

Randomized complete block design experiments (n = 6 experiments) evaluating steroidal implants (all from Merck Animal Health, Madison, NJ) were conducted in large-pen feedlot research facilities between 2015 and 2018 comparing an 80 mg trenbolone acetate (TBA) and 8 mg estradiol-17ß (E2) initial implant (Revalor-IH) and reimplanted with 200 mg TBA and 20 mg E2 (Revalor-200; REPEATED) to a single 80 mg TBA and 8 mg E2 uncoated; 120 mg TBA and 12 mg E2 coated implant (Revalor-XH) at arrival (SINGLE) on growth and carcass responses in finishing heifers. Experiments occurred in Nebraska, Oklahoma, Washington, and Texas. Similar arrival processing was used across experiments where 17,675 heifers [initial body weight = 333 kg SEM (4.1)] were enrolled into 180 pens (90 pens per treatment with 65-240 heifers per pen) and fed for 145-222 d. Only REPEATED heifers were removed from their pen at reimplant. Diets contained monensin and tylosin, consisted of ingredients common to each region, and contained greater than 90% concentrate. Ractopamine hydrochloride was fed for a minimum of 28 d prior to harvest. Linear mixed models were used for all analyses; model-adjusted means for each implant group and the corresponding SEM were generated. Distributions of U.S. Department of Agriculture (USDA) quality grade (QG) and yield grade (YG) were analyzed as ordinal outcomes. No differences (P ≥ 0.11) were detected for any performance parameters except dry matter intake (DMI), where SINGLE had greater (P = 0.02) DMI (9.48 vs. 9.38 ± 0.127 kg) compared with REPEATED. Heifers implanted with REPEATED had greater (P ≤ 0.02) hot carcass weight (HCW; 384 vs. 382 ± 2.8 kg), dressing percentage (64.54 vs. 64.22 ± 0.120%), and ribeye area (91.87 vs. 89.55 ± 0.839 cm2) but less (P ≤ 0.01) rib fat (1.78 vs. 1.83 ± 0.025 cm) and calculated YG (2.82 vs. 2.97 ± 0.040) and similar (P = 0.74) marbling scores (503 vs. 505 ± 5.2) compared with SINGLE heifers. Distributions of USDA YG and QG were impacted (P ≤ 0.03) by treatment such that REPEATED had fewer USDA Prime and YG 4 and 5 carcasses. Heifer growth performance did not differ between implant regimens, but HCW and muscling did, perhaps indicating that REPEATED may be suited for grid-based marketing, and SINGLE might be suited for heifers sold on a live basis depending upon market conditions and value-based grid premiums and discounts. However, these decisions are operational dependent and also may be influenced by factors including animal and employee safety, stress on animals, processing facilities, time of year, labor availability, and marketing strategies.

Impact of a fumaric acid and palm oil additive on beef cattle performance and carcass characteristics in diets containing increasing concentrations of corn silage.

A feedlot study was conducted comparing a natural feed additive at varying corn silage (CS) inclusions on receiving and finishing cattle performance. The study utilized 480 crossbred steers (initial shrunk body weight [BW] = 296 kg; SD = 24.1 kg) in 48 pens with 10 steers/pen and 8 pens per treatment. Treatments were designed as a 2 × 3 factorial with 3 inclusions of CS (14%, 47%, 80%; dry matter [DM] basis) with or without (+, -) the inclusion of a feed additive containing fumaric acid and palm oil (FAPO). All treatment diets contained 16% modified distillers grains plus solubles and 4% supplement with dry-rolled corn replacing CS on a DM basis. All steers were fed the 80 CS diet and adapted to 47% and 14% CS over a 10- and 24-d period, respectively. Cattle fed 80 CS were fed for 238 days, 47 CS for 195 days, and 14% CS were fed for 168 days to a common backfat of 1.28 cm (P ≥ 0.59). There were no interactions for CS inclusion and the inclusion of FAPO on final body weight (FBW), DMI, ADG, G:F, hot carcass weight (HCW), LM area, marbling, or calculated yield grade (CYG; P ≥ 0.15). There was no significant difference for FBW, DMI, ADG, G:F, HCW, marbling, or CYG for cattle fed with or without FAPO (P ≥ 0.13). However, there was a quadratic response for FBW, ADG, G:F, HCW, marbling, and CYG with increased inclusion of CS (P ≤ 0.04). Inclusion of FAPO had no effect on performance. Feeding CS at greater inclusions decreased daily gain and feed efficiency but increased FBW when fed to an equal fat endpoint. CS gave greater returns ($/animal) when fed at 80% of diet DM. Feeding greater amounts of CS can be an economical way to finish cattle. In this study, FAPO did not affect animal performance, carcass characteristics, or economic return.