CB65 and novel CB65 liposomal system suppress MG63 and Saos-2 osteosarcoma cell growth in vitro.

Curable approaches for primary osteosarcoma are inadequate and urge investigation of novel therapeutic formulations. Cannabinoid ligands exert antiproliferative and apoptotic effect on osteosarcoma cells via cannabinoid 2 (CB2) or transient receptor potential vanilloid type (TRPV1) receptors. In this study, we confirmed CB2 receptor expression in MG63 and Saos-2 osteosarcoma cells by qRT-PCR and flow cytometry (FCM), then reported the reduction effect of synthetic specific CB2 receptor agonist CB65 on the proliferation of osteosarcoma cells by WST-1 (water-soluble tetrazolium-1) and RTCA (real-time impedance-based proliferation). CB65 revealed an IC50 (inhibitory concentration) for MG63 and Saos-2 cells as 1.11 × 10-11 and 4.95 × 10-11 M, respectively. The specific antiproliferative effect of CB65 on osteosarcoma cells was inhibited by CB2 antagonist AM630. CB65 induced late apoptosis of MG63 and Saos-2 cells at 24 and 48 h, respectively by FCM when applied submaximal concentration. A novel CB65 liposomal system was generated by a thin film hydration method with optimal particle size (141.7 ± 0.6 nm), polydispersity index (0.451 ± 0.026), and zeta potential (-10.9 ± 0.3 mV) values. The encapsulation efficiency (EE%) of the CB65-loaded liposomal formulation was 51.12%. The CB65 and CB65-loaded liposomal formulation releasing IC50 of CB65 reduced proliferation by RTCA and invasion by scratch assay and induced late apoptosis of MG63 and Saos-2 cells, by FCM. Our results demonstrate the CB2 receptor-mediated antiproliferative and apoptotic effect of a new liposomal CB65 delivery system on osteosarcoma cells that can be used as a targeted and intelligent tool for bone tumors to ameliorate pediatric bone cancers following in vivo validation.

Comparative Evaluation of Clinical Efficacy and Safety of Collagen Laminin-Based Dermal Matrix Combined With Resveratrol Microparticles (Dermalix) and Standard Wound Care for Diabetic Foot Ulcers.

This is an open, prospective, comparative parallel-arm medical device clinical study of Dermalix (Dx) in diabetic foot wounds. Dx is a 3-dimensional collagen-laminin porous-structured dermal matrix prepared and additionally impregnated with resveratrol-loaded hyaluronic acid and dipalmitoylphosphatidylcholine-based microparticles. The aim was to evaluate the efficacy and safety of Dx, an investigational medical device, in Wagner 1 and 2 wounds in comparison to a standard wound care (SWC) that consists of irrigation and cleaning with sterile saline solution. Forty-eight patients were randomized to receive either SWC or SWC + Dx. A 4-week treatment period was followed by a 2-month follow-up without treatment. The wound area measurement, total collagen, vascular epidermal growth factor, tumor necrosis factor, interleukin 1, caspase 3, glutathione, reduced/oxidized glutathione, and lipid peroxidation levels were evaluated. At the end of 4 weeks, the percentage closures of wounds were determined as 57.82% for Dx, and 26.63% for SWC groups. Dx had a significant effect on tumor necrosis factor, caspase 3, and reduced/oxidized glutathione levels. Dx provided 2 times faster wound healing and decreased oxidative stress. Application of Dx in the first phase of wound would help the wound area heal faster with a safe profile.

Current approaches and future prospects of nanofibers: a special focus on antimicrobial drug delivery.

Antibacterial nanofibers have a great potential for effective treatment of infections. They act as drug reservoir systems that release higher quantities of antibacterial agents/drug in a controlled manner at infection sites and prevent drug resistance, while concomitantly decreasing the systemic toxicity. With this drug delivery system, it is also possible to achieve multiple drug entrapment and also simultaneous or sequential release kinetics at the site of action. Therefore, advances in antibacterial nanofibers as drug delivery systems were overviewed within this article. Recently published data on antibacterial drug delivery was also summarised to provide a view of the current state of art in this field. Although antibacterial use seems to be limited and one can ask that 'what is left to be discovered?'; recent update literatures in this field highlighted the use of nanofibers from very different perspectives. We believe that readers will be benefiting this review for enlightening of novel ideas.

Polymeric Nanoparticle Versus Liposome Formulations: Comparative Physicochemical and Metabolomic Studies as L-Carnitine Delivery Systems.

L-Carnitine has attracted much more attention especially in the treatment of crucial diseases such as diabetes, regional slimming, and obesity because of its metabolic activities. However, because of its short half-life, low bioavailability, and inability to be stored in the body, frequent dosing is required. In this study, L-carnitine-loaded liposome (lipo-carnitine) and PLGA nanoparticle (nano-carnitine) formulations were prepared and characterized. For lipo-carnitine and nano-carnitine formulations, particle size values were 97.88 ± 2.96 nm and 250.90 ± 6.15 nm; polydispersity index values were 0.35 ± 0.01 and 0.22 ± 0.03; zeta potential values were 6.36 ± 0.54 mV and - 32.80 ± 2.26 mV; and encapsulation efficiency percentage values were 14.26 ± 3.52% and 21.93 ± 4.17%, respectively. Comparative in vitro release studies of novel formulations and solution of L-carnitine revealed that L-carnitine released 90% of its content at the end of 1st hour. On the other hand, lipo-carnitine and nano-carnitine formulations maintained a controlled-release profile for 12 h. The in vitro efficacy of the formulations on cardiac fibroblasts (CFs) was evaluated by metabolomic studies and pathway analysis. Besides the prolonged release, lipo-carnitine/nano-carnitine formulations were also found to be effective on amino acid, carbohydrate, and lipid metabolisms. As a result, innovative nano-formulations were successfully developed as an alternative to conventional preparations which are available on the market.

Surface modified nanoliposome formulations provide sustained release for 5-FU and increase cytotoxicity on A431 cell line.

Malignant melanoma is a type of skin cancer with high risk of metastasis. 5-Fluorouracil is commonly used for treatment of skin cancer, however its penetration through the skin is found to be insufficient in some cases. Therefore, we optimized its pharmacokinetics by fabricating 5- Fluorouracil-loaded nanoliposome formulations modified with Poly-L-lysine coating. 5-Fluorouracil-loaded nanoliposome formulations were prepared using dipalmitoylphosphatidylcholine, dicethylphosphate and cholesterol having encapsulation efficiency of 45 ± 9.61%. The particle size, zeta potential, polydispersity index and encapsulation rate of the prepared formulation was found to be 237.9 ± 0.986 nm, 41.4 ± 1.060 mV, 0.233 ± 0.019 and 88.2 ± 7.85%, respectively. Surface characterization, molecular structure and thermal property illumination of the formulations were performed alongside stability studies. The In-vitro release of 5-FU from Lipo-FU6 and PLL-1 formulations was investigated by dialysis membrane method. Within the first 12 hours, the percentage release of 5-FU from Lipo-FU6 and PLL-1 formulations was observed to be 47.17% and 20.84%, respectively. Moreover, the cytotoxicity study on A431 epidermal carcinoma cell lines has revealed that 5-FU-loaded formulations were toxic to cells unlike the 5-FU free formulations. In conclusion, PLL coated nanoliposome formulations showed a potential to be an effective option for further combined drug/gene therapy applications.

Propolis loaded liposomes: evaluation of antimicrobial and antioxidant activities.

Propolis, a natural bee product, has both antimicrobial/antifungal and antioxidant characteristics. Active substances having antimicrobial and antifungal effects are used to avoid infections, which develop during long treatment process of chronic wounds. Antioxidant substances protect wound areas against the effect of free radicals and accelerate the healing process. For this purpose, propolis was used to develop topical liposome formulations for wound treatment. Characterization studies (particle size distribution, polydispersity index, Zeta Potential, morphology pH, loading capacity, encapsulation efficiency, in-vitro release behaviour) as well as stability studies were performed. Then in-vitro antioxidant (free radical scavenging capacity and trolox equivalent antioxidant capacity) and antimicrobial/antifungal activities of formulations have been evaluated. The particle size of formulations was found within the range of 300-750 nm depending on the concentration of lipid and water phase in the formulation. The Zeta Potential and pH values of optimum formulation were -23.0 ± 0.666 and 6.34, respectively. Loading capacity and encapsulation efficiency were 66.535 ± 2.705% and 57.321 ± 2.448%. At the end of 8 h, 48.16% of propolis was released and the formulations were found stable during 3 months at +4 °C. Drug loaded liposome formulations significantly scavenged the ABTS+ radical in a dose-dependent manner of propolis when compared with unloaded liposome formulations (p < 0.05). The minimum inhibitory concentration (MIC) values of liposomes ranged from 512 to 128 µg/mL for bacteria and 256 to 128 µg/mL for fungi. Overall results showed that effective and innovative alternative was developed for topical application in wound treatment with propolis loaded liposomal formulations having antioxidant and antimicrobial effects.

Liposome-based combination therapy for acne treatment.

Acne vulgaris is one of the most common chronic diseases worldwide with the high prevalence ratio of about 80-85% in patients who are in puberty period. For the treatment options, many conventional dosage forms are available; however, existing limitations of systemic administration of drugs (oral antibiotics), such as adverse events and resistance, led for seek of new formulation options. In this study, liposomes containing tetracycline HCl and tretinoin were prepared by the film formation method. In vitro characterization studies revealed that liposomes (111.10 ± 8.02 nm; P.D.I.=0.198 ± 0.03; Z.P.=25.83 ± 0.40 mV) with an encapsulation efficiency more than 80% for both APIs were formulated. In order to maintain a suitable viscosity for topical application, optimized liposomal formulations were dispersed in carbopol-based gel. In vitro release of APIs was sustained for 24 hours with released amounts of 56.44% and 58.44% for tetracycline HCl and tretinoin, respectively. Stability evaluation of both liposomes and liposomes in hydrogels was investigated for 6 months at 4 °C and 25 °C; and no statistically significant change was observed in terms of particle size, zeta potential, encapsulation efficiency, appearance, pH, and viscosity. Cytotoxicity tests confirmed the nontoxic structure of liposomal gel formulations on mice fibroblast cells. In addition, antibacterial efficacy has been proven with Staphylococcus aureus and Streptococcus epidermidis strains as well as the effect on biofilm formation and eradication. As a result, we hereby presented a new combination drug product, which consists of dual active ingredients having comedolytic and bacteriostatic effects in a single, safe, and stable liposome formulation.

Liposome-ligand conjugates: a review on the current state of art.

Early researchers focussed on developing stimuli-responsive liposomes in order to manipulate drug release at the site of action or under certain conditions. In recent times, a great deal of efforts has been made to modify the surface of liposomes with ligands for the purpose of achieving targeted drug delivery. Due to the morphology of liposomes, their surfaces can be engineered by attaching molecules such as oligosaccharides, peptides, antibodies, antigens and oligonucleotides to the bilayer structure. Over the years, a number of techniques including the use of covalent and non-covalent linkages have been utilised in designing ligand-liposome conjugates. In this review, various strategies for the functionalisation of liposomes as well as the different types of ligand-liposome conjugates have been discussed. Finally, the pros and cons of conjugation in liposomes are concisely summarised.

Gel network comprising UV crosslinked PLGA-b-PEG-MA nanoparticles for ibuprofen topical delivery.

Ibuprofen is a non-steroidal anti-inflammatory drug for the treatment of Rheumatoid Arthritis and osteoarthritis. In this study, we prepared topical gel network for enhancement of ibuprofen penetration, maintenance of controlled release and increased patient compliance. Nanoparticles containing ibuprofen were prepared by means of emulsion formation/solvent diffusion method using synthesized copolymer. Nanoparticles were then conjugated with aminoethylmethacrylate, resulting in ibuprofen-loaded nanoparticles in PLGA-b-PEG-MA structure. Ibuprofen-loaded gel networks were developed by crosslinking nanoparticles via UV exposure. Suitability for topical application has been assessed through characterization of particle size, zeta potential, morphology, encapsulation efficiency, in vitro release, cytotoxicity and enhancement of in vitro wound healing. The mean diameter of nanoparticles was measured as 230 ± 20 nm. Gel network formulations with higher particle size (2800 ± 350 nm) and zeta potential (39.8 ± 9.2 mV), depending on conjugation of methacrylate within copolymeric structure, and having encapsulation efficacy of 73.6 ± 2.8% were prepared. The in vitro release of ibuprofen was sustained for more than 7 hours. Gel network improved collagen synthesis, type I collagen mRNA expression and fibrosis in dose dependent manner. Based on this, we can conclude that PLGA-b-PEG gel network might be a promising systems for the local delivery of ibuprofen in RA patients.

A Snapshot on the Current Status of Alzheimer's Disease, Treatment Perspectives, in-Vitro and in-Vivo Research Studies and Future Opportunities.

Alzheimer's Disease (AD) is one of the most challenging diseases faced by humankind. AD is still not classified as curable because of the complex structure of pathologies underlying it. As the mean life expectancy of the world population constantly increases, the prevalence of AD and treatment costs for AD also grow rapidly. Current state of the art for AD treatment mainly consists of palliative therapy aimed at providing symptomatic relief and improving the standard of living in patients with AD. However, different research groups are working on more effective and safe drug delivery options aimed at both symptomatic relief and treatment of the underlying mechanisms. In this review, the current prevalence of AD, health costs, pathologies, and available treatment options including the ones in the market and/or under trial have been reviewed. Data in the existing literature have been presented, and future opportunities have been discussed. It is our belief that these nanotechnological products provide the required efficacy and safety profiles to enable these formulations go through phase studies and enter the market after regulatory authority approval, as with cancer. Last, but not the least the metabolomic studies will be providing useful informative data on the early diagnosis of AD, thus may be clinical implications might be delayed with the administration of therapeutic agents at the initial state of the disease.

Formulation and Evaluation of Organogels Containing Hyaluronan Microparticles for Topical Delivery of Caffeine.

Cellulite is a dermal disorder including the extracellular matrix, the lymphatic and microcirculatory systems and the adipose tissue. Caffeine is used as the active moiety depending its preventive effect on localization of fat in the cellular structure. Hyaluronic acid (hyaluronan-HA) is a natural constituent of skin that generates formation and poliferation of new cells having a remarkable moisturizing ability. The aim of this study is to formulate HA microparticles loaded with caffeine via spray-drying method. Resulting microparticle formulations (33.97 ± 0.3 µm, span < 2, 88.56 ± 0.42% encapsulation efficiency) were distributed in lecithin organogels to maintain the proper viscosity for topical application. Following the characterization and cell culture studies, in vitro drug release and ex vivo permeation studies were performed. The accumulated amount of caffeine was twice higher than the aqueous solution for the microparticle-loaded organogels at 24 h (8262,673 µg/cm2versus 4676,691 µg/cm2). It was related to the sustained behaviour of caffeine release from the microparticles. As a result, lecithin organogel containing HA-encapsulated microparticles could be considered as suitable candidate formulations for efficient topical drug delivery system of caffeine. In addition to that, synergistic effect of this combination appears as a promising approach for long-acting treatment of cellulite.

Wound healing effects of collagen-laminin dermal matrix impregnated with resveratrol loaded hyaluronic acid-DPPC microparticles in diabetic rats.

An alternative formulation for the treatment of diabetic foot wounds that heal slowly is a requirement in pharmaceutical field. The aim of this study was to develop a dermal matrix consisting of skin proteins and lipids with an antioxidant that will enhance healing and balance the oxidative stress in the diabetic wound area due to the high levels of glucose. Thus a novel three dimensional collagen-laminin porous dermal matrix was developed by lyophilization. Resveratrol-loaded hyaluronic acid and dipalmitoylphosphatidylcholine microparticles were combined with this dermal matrix. Characterization, in vitro release, microbiological and in vivo studies were performed. Spherical microparticles were obtained with a high RSV encapsulation efficacy. The microparticles were well dispersed in the dermal matrix from the surface to deeper layers. Collagenase degraded dermal matrix, however the addition of RSV loaded microparticles delayed the degradation time. The release of RSV was sustained and reached 70% after 6h. Histological changes and antioxidant parameters in different treatment groups were investigated in full-thickness excision diabetic rat model. Collagen fibers were intense and improved by the presence of formulation without any signs of inflammation. The highest healing score was obtained with the dermal matrix impregnated with RSV-microparticles with an increased antioxidant activity. Collagen-laminin dermal matrix with RSV microparticles was synergistically effective due to presence of skin components in the formulation and controlled release achieved. This combination is a safe and promising option for the treatment of diabetic wounds requiring long recovery.

An overview of nanofiber-based antibacterial drug design.

INTRODUCTION: Conventional administration of antibacterial drugs to the human body can cause vital problems such as dose dependent systemic toxicity and bacterial resistance which prevent the healing process. In this regard, recent studies have been devoted to producing nanofiber based antibacterial drug delivery approaches which surpass bacterial resistance and toxicological issues. Areas covered: This review summarizes latest developments in the production of antibacterial nanofibers, nanofiber based antibacterial action mechanisms and release profiles of nanofibers. In the first section, key challenges of antibacterial nanofibers and release and non-release antibacterial action mechanisms of nanofibers are highlighted. In the second section, routes of antibacterial nanofiber design have been given. Factors affecting drug release mechanisms have been discussed elaborately in the final section. Literature was surveyed from research articles, standard sources (WOS and Scopus) and clinical trials. Expert opinion: New generation nanofibers provide high drug loading capacity and efficiency with their high surface area and tunable pore size. They also enable sustained and controlled release of antibacterial drugs with basic (direct incorporation, physically adsorption or chemically surface modification of antibacterial drugs), advanced (core-shell structure, nanoparticle decorated and multidrug loaded) and smart (stimuli responsive) antibacterial nanofiber design strategies.

Effective topical delivery systems for corticosteroids: dermatological and histological evaluations.

Atopic dermatitis (AD) is a chronic and relapsing skin disease with severe eczematous lesions. Long-term topical corticosteroid treatment can induce skin atrophy, hypopigmentation and transepidermal water loss (TEWL) increase. A new treatment approach was needed to reduce the risk by dermal targeting. For this purpose, Betamethasone valerate (BMV)/Diflucortolone valerate (DFV)-loaded liposomes (220-350 nm) were prepared and incorporated into chitosan gel to obtain adequate viscosity (∼13 000 cps). Drugs were localized in stratum corneum + epidermis of rat skin in ex-vivo permeation studies. The toxicity was assessed on human fibroblast cells. In point of in-vivo studies, pharmacodynamic responses, treatment efficacy and skin irritation were evaluated and compared with previously prepared nanoparticles. Liposome/nanoparticle in gel formulations produced higher paw edema inhibition in rats with respect to the commercial cream. Similar skin blanching effect with commercial creams was obtained via liposome in gels although they contain 10 times less drug. Dermatological scoring results, prognostic histological parameters and suppression of mast cell numbers showed higher treatment efficiency of liposome/nanoparticle in gel formulations in AD-induced rats. TEWL and erythema measurements confirmed these results. Overview of obtained results showed that liposomes might be an effective and safe carrier for corticosteroids in skin disease treatment.

Nanofibers based antibacterial drug design, delivery and applications.

Infections caused by microorganisms like bacteria, fungi, etc. are the main obstacle in healing processes. Conventional antibacterial administration routes can be listed as oral, intravenous/intramuscular, topical and inhalation. These kinds of drug administrations are faced with critical vital issues such as; more rapid delivery of the drug than intended which can result in bacterial resistance, dose related systemic toxicity, tissue irritation and finally delayed healing process that need to be tackled. Recently, studies have been focused on new drug delivery systems, overcoming resistance and toxicological problems and finally localizing the molecules at the site of action in a proper dose. In this regard, many nanotechnological approaches such as nanoparticulate therapeutic systems have been developed to address accompanying problems mentioned above. Among them, drug loaded electrospun nanofibers propose main advantages like controlled drug delivery, high drug loading capacity, high encapsulation efficiency, simultaneous delivery of multiple drugs, ease of production and cost effectiveness for pharmaceutical and biomedical applications. Therefore, some particular attention has been devoted to the design of electrospun nanofibers as promising antibacterial drug carrier systems. A variety of antibacterials e.g., biocides, antibiotics, quaternary ammonium salts, triclosan, metallic nanoparticles (silver, titanium dioxide, and zinc oxide) and antibacterial polymers (chitosan, polyethyleneimine, etc.) have been impregnated by various techniques into nanofibers that exhibit strong antibacterial activity in standard assays. This review highlights the design and delivery of antibacterial drug loaded nanofibers with particular focus on their function in the fields of drug delivery, wound healing, tissue engineering, cosmetics and other biomedical applications.

Evaluation of characteristics and in vitro antioxidant properties of RSV loaded hyaluronic acid-DPPC microparticles as a wound healing system.

Resveratrol (RSV) was incorporated into microparticles by spray drying to treat chronic wounds such as diabetic ulcers. RSV was chosen due to its defense mechanisms as the formation of free radicals delays the healing process. RSV was loaded into microparticles consisting of dipalmitoylphosphatidylcholine (DPPC) and hyaluronic acid (HA), a polysaccharide naturally present within the skin, known to contribute to the healing process. Microparticles were evaluated in terms of production yield, size distribution, encapsulation efficiency, morphology, specific surface area, thermal properties and water content. Spherical and homogenous microparticles (span ≤ 2) in a size range between 20 and 30 µm were obtained with high encapsulation efficiency (≥ 97%). The effect of enzymes (hyaluronidase, phospholipase and lipase) on RSV release showed a dose-dependent pattern followed by a slow release stage. Cytotoxicity/proliferation and oxidative stress parameters (glutathione, oxidized glutathione, glutathione peroxidase, malondialdehyde, superoxide dismutase) obtained from human dermal fibroblast cell cultures revealed that formulations increased cell proliferation and the presence of RSV decreased oxidation in cells. RSV-loaded HA-DPPC microparticles appear as a promising formulation for wound healing due to synergistic effect of the ingredients.