Highly crystalline and fluorescent BODIPY-labelled phenyl-triazole-coumarins as n-type semiconducting materials for OFET devices.

In this work, the synthesis of BODIPY-phenyl-triazole labelled coumarins (BPhTCs) using a two-step approach is described. The influence of the BODIPY appending on the photophysical, electrochemical and thermal properties of the phenyl-triazole-coumarin precursors (PhTCs) was investigated. Band gap energies were measured by absorption spectroscopy (2.20 ± 0.02 eV in the solid and 2.35 ± 0.01 eV in solution) and cyclic voltammetry (2.10 ± 0.05 eV). The results are supported by DFT calculations confirming the presence of lowest LUMO levels that facilitate the electron injection and stabilize the electron transport. Their charge-transport parameters were measured in Organic Field-Effect Transistor (OFET) devices. BPhTCs showed an ambipolar transistor behavior with good n-type charge mobilities (10-2 cm2V-1s-1) allowing these derivatives to be employed as promising semiconducting crystalline and fluorescent materials with good thermal and air stability up to 250 °C.

PHB production by Bacillus megaterium strain MNSH1-9K-1 using low-cost media.

Plastics are widely used for diverse applications due to their versatility. However, their negative impact on ecosystems is undeniable due to their long-term degradation. Thus, there is a rising need for developing eco-friendlier alternatives to substitute fossil-based plastics, like biopolymers. PHA are synthesized intracellularly by microorganisms under stressful conditions of growth and have similar characteristics to conventional polymers, like their melting point, transition temperatures, crystallinity, and flexibility. Although it is feasible to use biopolymers for diverse industrial applications, their elevated production cost due to the supplies needed for microbiological procedures and the low productivity yields obtained have been the main limiting factors for their commercial success. The present study assessed the ability of Bacillus megaterium strain MNSH1-9K-1 to produce biopolymers using low-cost media from different kinds of fruit-peel residues. The results show that MNSH1-9K-1 can produce up to 58 g/L of PHB when grown in a medium prepared from orange-peel residues. The data obtained provide information to enhance the scalability of these kinds of biotechnological processes.

The role of organic cations as additives in photovoltaic perovskites.

The design of additives for perovskite-based solar cells seeks to improve the balance between stability and power conversion efficiency. Organic molecules such as theophylline, theobromine and caffeine (xanthines) have proved to be a good engineering solution. As an alternative, we present a first-principles study of the use of organic cations as additives. These cations are obtained when the free nitrogen of the imidazole unit of the aforementioned molecules is quaternized. We have found that the interaction between the organic cations and the MAPbI3 perovskite surface is stronger compared to the organic molecules. The Pb-O and I-H bonds of the interface dominated these interactions. In addition, organic cations showed higher charge transfer through the interface and shallow states that are harmless and could improve the charge carrier mobility. These characteristics show that quaternized xanthines should be a promising additive for perovskite materials in photovoltaic applications.

Assessing the Larvicidal Properties of Endemic Campeche, Mexico Plant Piper cordoncillo var. apazoteanum (Piperaceae) against Aedes aegypti (Diptera: Culicidae) Mosquitoes.

The research aims to investigate the mortality effect of essential oil from Piper cordoncillo var. apazoteanum, an endemic plant from Campeche, Mexico, on early second-instar Aedes aegypti larvae; it also aims to identify the volatile compounds present in the fresh leaves of the plant. To test the effectiveness of the essential oil, we followed World Health Organization Standard Procedures. Larvae were observed for 17 consecutive days after treatment to determine the mortality and growth-inhibitory effect exerted by the essential oil. The results showed that the essential oil was effective in controlling mosquito populations. At a concentration of 800 ppm, the oil achieved an effectiveness rate of 70.00 ± 8.16% after 24 h, increasing to 100.00 ± 0.01% mortality after 72 h. With a concentration of 400 ppm, the effectiveness was 98.33 ± 0.17% by the end of the experiment. Furthermore, the obtained results demonstrated that the LC50 value was 61.84 ± 6.79 ppm, while the LC90 value was 167.20 ± 11.49 ppm. Essential oil concentrations inhibited the growth of immature insect stages, with concentrations between 800-100 ppm demonstrating very high inhibitory activity, and the lowest concentration of 50 ppm showing high inhibitory activity. The study also identified 24 chemical compounds representing 86.71% of the volatile compound composition of the fresh leaves of P. cordoncillo; the most abundant compounds were Safrole, Caryophyllene oxide, E-Nerolidol, and Calarene epoxide. The method used to extract the volatile compounds, solvent-free microwave extraction (SFME), is a promising alternative to traditional methods that avoids the use of potentially harmful solvents, making it more ecologically friendly and potentially safer for professionals handling the extracted compounds. Overall, the study demonstrates the potential of P. cordoncillo essential oil as an effective means of controlling mosquito populations, and provides valuable information on the chemical composition of the plant.Moreover, our study is the first to report on the biological activity and chemical composition of P. cordoncillo worldwide.

Enhancing the stability and efficiency of MAPbI3 perovskite solar cells by theophylline-BF4 - alkaloid derivatives, a theoretical-experimental approach.

Perovskite solar cells (PSCs) are an evolving photovoltaic field with the potential to disrupt the established silicon solar cell market. However, the presence of many transport barriers and defect trap states at the interfaces and grain boundaries has negative effects on PSCs; it decreases their efficiency and stability. The purpose of this work was to investigate the effects on efficiency and stability achieved by quaternary theophylline additives in MAPbI3 PSCs with the structure FTO/TiO2/perovskite/spiro-OMeTAD/Ag. The X-ray photoelectron spectroscopy (XPS) and theoretical calculation strategies were applied to study the additive's interaction in the layer. The tetrafluoroborinated additive results in an increase in device current density (J SC) (23.99 mA cm-1), fill factor (FF) (65.7%), and open-circuit voltage (V OC) (0.95 V), leading to significant improvement of the power conversion efficiency (PCE) to 15.04% compared to control devices (13.6%). Notably, films exposed to controlled humidity of 30% using the tetrafluoroborinated additive maintained their stability for more than 600 hours (h), while the control films were stable for less than 240 hours (h).

Influence of gamma radiation on Amphotericin B incorporated in PVP hydrogel as an alternative treatment for cutaneous leishmaniosis.

Amphotericin B (Amph-B) is an antifungal drug used intravenously for the treatment of leishmaniasis. Side-effects from Amph-B treatment can arise such as cardiac arrhythmia and renal dysfunctions, which will lead to discontinuation of treatment. Unfortunately, patients in endemic countries do not have access to alternative therapies. The objective of this study was to analyze the effects of Cobalt-60 gamma irradiation on crosslinking polymeric hydrogels (Hydg) and the incorporation of Amph-B into the gel as a controlled-release drug delivery alternative. Polyvinylpyrrolidone (PVP)/Amph-B solutions were irradiated with 15 kGy at 0 °C and 25 °C. The drug's stability was ascertained by UV-visible spectrometry, liquid chromatography/mass spectrometry and proton nuclear magnetic resonance. Irradiated Hydg/Amph-B achieved similar stability to the standard Amph-B solution and was enough to promote hydrogel crosslinking. In vitro trials were carried out to ensure Amph-B was still biologically active after irradiation. The results from flow cytometry and MTT assay show that Amph-B had an IC50 = 16.7 nM. A combination of Hydg at 1.324 gmL-1 and Amph-B at 25.1 nM for 24 h lead to the greatest inhibition of L. amazonensis promastigotes, and could be used as an alternative treatment method for cutaneous leishmaniosis.

Efficient OLEDs Fabricated by Solution Process Based on Carbazole and Thienopyrrolediones Derivatives.

Four low molecular weight compounds-three of them new, two of them with carbazole (Cz) as functional group and the other two with thienopyrroledione (TPD) group-were used as emitting materials in organic light emitting diodes (OLEDs). Devices were fabricated with the configuration ITO/PEDOT:PSS/emitting material/LiF/Al. The hole injector layer (HIL) and the emitting sheet were deposited by spin coating; LiF and Al were thermally evaporated. OLEDs based on carbazole derivatives show luminances up to 4130 cd/m², large current efficiencies about 20 cd/A and, cautiously, a very impressive External Quantum Efficiency (EQE) up to 9.5%, with electroluminescence peaks located around 490 nm (greenish blue region). Whereas, devices manufactured with TPD derivatives, present luminance up to 1729 cd/m², current efficiencies about 4.5 cd/A and EQE of 1.5%. These results are very competitive regarding previous reported materials/devices.