Use of oxygen-loaded nanobubbles to improve tissue oxygenation: Bone-relevant mechanisms of action and effects on osteoclast differentiation.

Gas-loaded nanobubbles have potential as a method of oxygen delivery to increase tumour oxygenation and therapeutically alleviate tumour hypoxia. However, the mechanism(s) whereby oxygen-loaded nanobubbles increase tumour oxygenation are unknown; with their calculated oxygen-carrying capacity being insufficient to explain this effect. Intra-tumoural hypoxia is a prime therapeutic target, at least partly due to hypoxia-dependent stimulation of the formation and function of bone-resorbing osteoclasts which establish metastatic cells in bone. This study aims to investigate potential mechanism(s) of oxygen delivery and in particular the possible use of oxygen-loaded nanobubbles in preventing bone metastasis via effects on osteoclasts. Lecithin-based nanobubbles preferentially interacted with phagocytic cells (monocytes, osteoclasts) via a combination of lipid transfer, clathrin-dependent endocytosis and phagocytosis. This interaction caused general suppression of osteoclast differentiation via inhibition of cell fusion. Additionally, repeat exposure to oxygen-loaded nanobubbles inhibited osteoclast formation to a greater extent than nitrogen-loaded nanobubbles. This gas-dependent effect was driven by differential effects on the fusion of mononuclear precursor cells to form pre-osteoclasts, partly due to elevated potentiation of RANKL-induced ROS by nitrogen-loaded nanobubbles. Our findings suggest that oxygen-loaded nanobubbles could represent a promising therapeutic strategy for cancer therapy; reducing osteoclast formation and therefore bone metastasis via preferential interaction with monocytes/macrophages within the tumour and bone microenvironment, in addition to known effects of directly improving tumour oxygenation.

Tracking cellular uptake, intracellular trafficking and fate of nanoclay particles in human bone marrow stromal cells.

Clay nanoparticles, in particular synthetic smectites, have generated interest in the field of tissue engineering and regenerative medicine due to their utility as cross-linkers for polymers in biomaterial design and as protein release modifiers for growth factor delivery. In addition, recent studies have suggested a direct influence on the osteogenic differentiation of responsive stem and progenitor cell populations. Relatively little is known however about the mechanisms underlying nanoclay bioactivity and in particular the cellular processes involved in nanoclay-stem cell interactions. In this study we employed confocal microscopy, inductively coupled plasma mass spectrometry and transmission electron microscopy to track the interactions between clay nanoparticles and human bone marrow stromal cells (hBMSCs). In particular we studied nanoparticle cellular uptake mechanisms and uptake kinetics, intracellular trafficking pathways and the fate of endocytosed nanoclay. We found that nanoclay particles present on the cell surface as µm-sized aggregates, enter hBMSCs through clathrin-mediated endocytosis, and their uptake kinetics follow a linear increase with time during the first week of nanoclay addition. The endocytosed particles were observed within the endosomal/lysosomal compartments and we found evidence for both intracellular degradation of nanoclay and exocytosis as well as an increase in autophagosomal activity. Inhibitor studies indicated that endocytosis was required for nanoclay upregulation of alkaline phosphatase activity but a similar dependency was not observed for autophagy. This study into the nature of nanoclay-stem cell interactions, in particular the intracellular processing of nanosilicate, may provide insights into the mechanisms underlying nanoclay bioactivity and inform the successful utilisation of clay nanoparticles in biomaterial design.

Depth profiling via nanoindentation for characterisation of the elastic modulus and hydraulic properties of thin hydrogel layers.

The accurate determination of the mechanical properties of hydrogels is of fundamental importance for a range of applications, including in assessing the effect of stiffness on cell behaviour. This is a particular issue when using thin hydrogel layers adherent to stiff substrate supports, as the apparent stiffness can be significantly influenced by the constraint of the underlying impermeable substrate, leading to inaccurate measurements of the elastic modulus and permeability of thin hydrogel layers. This study used depth profiling nanoindentation and a poroelastic model for spherical indentation to identify the elastic moduli and hydraulic conductivity of thin polyacrylamide (PAAm) hydrogel layers (∼27 µm-782 µm thick) on impermeable substrates. The apparent stiffness of thin PAAm layers increased with indentation depth and was significantly greater than those of thicker hydrogels, which showed no influence of indentation depth. The hydraulic conductivity decreased as the geometrical confinement of hydrogels increased, indicating that the fluid became more constrained within the confinement areas. The impact of geometrical confinement on the apparent modulus and hydraulic conductivity of thin PAAm hydrogel layers was then established, and their elastic moduli and intrinsic permeability were determined in relation to this effect. This study offers valuable insights into the mechanical characterisation of thin PAAm hydrogel layers used for the fundamental study of cell mechanobiology.

Self-Assembly of Structured Colloidal Gels for High-Resolution 3D Micropatterning of Proteins at Scale.

Self-assembly, the spontaneous ordering of components into patterns, is widespread in nature and fundamental to generating function across length scales. Morphogen gradients in biological development are paradigmatic as both products and effectors of self-assembly and various attempts have been made to reproduce such gradients in biomaterial design. To date, approaches have typically utilized top-down fabrication techniques that, while allowing high-resolution control, are limited by scale and require chemical cross-linking steps to stabilize morphogen patterns in time. Here, a bottom-up approach to protein patterning is developed based on a novel binary reaction-diffusion process where proteins function as diffusive reactants to assemble a nanoclay-protein composite hydrogel. Using this approach, it is possible to generate scalable and highly stable 3D patterns of target proteins down to sub-cellular resolution through only physical interactions between clay nanoparticles and the proteins and ions present in blood. Patterned nanoclay gels are able to guide cell behavior to precisely template bone tissue formation in vivo. These results demonstrate the feasibility of stabilizing 3D gradients of biological signals through self-assembly processes and open up new possibilities for morphogen-based therapeutic strategies and models of biological development and repair.

An Acoustic Device for Ultra High-Speed Quantification of Cell Strain During Cell-Microbubble Interaction.

Microbubbles utilize high-frequency oscillations under ultrasound stimulation to induce a range of therapeutic effects in cells, often through mechanical stimulation and permeabilization of cells. One of the largest challenges remaining in the field is the characterization of interactions between cells and microbubbles at therapeutically relevant frequencies. Technical limitations, such as employing sufficient frame rates and obtaining sufficient image resolution, restrict the quantification of the cell's mechanical response to oscillating microbubbles. Here, a novel methodology was developed to address many of these limitations and improve the image resolution of cell-microbubble interactions at high frame rates. A compact acoustic device was designed to house cells and microbubbles as well as a therapeutically relevant acoustic field while being compatible with a Shimadzu HPV-X camera. Cell viability tests confirmed the successful culture and proliferation of cells, and the attachment of DSPC- and cationic DSEPC-microbubbles to osteosarcoma cells was quantified. Microbubble oscillation was observed within the device at a frame rate of 5 million FPS, confirming suitable acoustic field generation and ultra high-speed image capture. High spatial resolution in these images revealed observable deformation in cells following microbubble oscillation and supported the first use of digital image correlation for strain quantification in a single cell. The novel acoustic device provided a simple, effective method for improving the spatial resolution of cell-microbubble interaction images, presenting the opportunity to develop an understanding of the mechanisms driving the therapeutic effects of oscillating microbubbles upon ultrasound exposure.

Remembering our first date brings back those fuzzy feelings: The role of romantic nostalgia in relationship functioning.

People often reflect nostalgicallyon the momentous occasions of their relationships. Experiencing romantic nostalgia-nostalgia for shared experiences with one's current romantic partner-likely confers relationship-specific benefits. Indeed, prior research indirectly hints at this assumed outcome by looking at relationship narratives. More recent work provides direct evidence that romantic nostalgia is both positively correlated with and causally enhances relationship-specific benefits. We describe such research and discuss avenues for future investigations that address mechanisms and potential downsides of romantic nostalgia while exploring translational possibilities.

Antibiotic-Loaded Polymersomes for Clearance of Intracellular Burkholderia thailandensis.

Melioidosis caused by the facultative intracellular pathogen Burkholderia pseudomallei is difficult to treat due to poor intracellular bioavailability of antibiotics and antibiotic resistance. In the absence of novel compounds, polymersome (PM) encapsulation may increase the efficacy of existing antibiotics and reduce antibiotic resistance by promoting targeted, infection-specific intracellular uptake. In this study, we developed PMs composed of widely available poly(ethylene oxide)-polycaprolactone block copolymers and demonstrated their delivery to intracellular B. thailandensis infection using multispectral imaging flow cytometry (IFC) and coherent anti-Stokes Raman scattering microscopy. Antibiotics were tightly sequestered in PMs and did not inhibit the growth of free-living B. thailandensis. However, on uptake of antibiotic-loaded PMs by infected macrophages, IFC demonstrated PM colocalization with intracellular B. thailandensis and a significant inhibition of their growth. We conclude that PMs are a viable approach for the targeted antibiotic treatment of persistent intracellular Burkholderia infection.

What shall we call God? An exploration of metaphors coded from descriptions of God from a large U.S. undergraduate sample.

People use numerous metaphors to describe God. God is seen as a bearded man, light, and love. Based on metaphor theories, the metaphors people use to refer to God reflect how people think about God and could, in turn, reflect their worldview. However, little work has explored the common metaphors for God. This was the purpose of the current investigation. Four trained raters coded open-ended responses from predominantly Christian U.S. undergraduates (N = 2,923) describing God for the presence or absence of numerous metaphoric categories. We then assessed the frequency of each of the metaphor categories. We identified 16 metaphor categories that were present in more than 1% of the responses. The top categories were "GOD IS POWER," "GOD IS HUMAN," and "GOD IS MALE." These findings were similar across religious affiliations. We attempted to support our coding analysis using top-down and bottom-up automated language analysis. Results from these analyses provided added confidence to our conclusions. We discuss the implications of our findings and the potential for future studies investigating important psychological and behavioral outcomes of using different metaphors for God.

Investigation of the Acoustic Vaporization Threshold of Lipid-Coated Perfluorobutane Nanodroplets Using Both High-Speed Optical Imaging and Acoustic Methods.

A combination of ultrahigh-speed optical imaging (5 × 106 frames/s), B-mode ultrasound and passive cavitation detection was used to study the vaporization process and determine both the acoustic droplet vaporization (ADV) and inertial cavitation (IC) thresholds of phospholipid-coated perfluorobutane nanodroplets (PFB NDs, diameter = 237 ± 16 nm). PFB NDs have not previously been studied with ultrahigh-speed imaging and were observed to form individual microbubbles (1-10 µm) within two to three cycles and subsequently larger bubble clusters (10-50 µm). The ADV and IC thresholds did not statistically significantly differ and decreased with increasing pulse length (20-20,000 cycles), pulse repetition frequency (1-100 Hz), concentration (108-1010 NDs/mL), temperature (20°C-45°C) and decreasing frequency (1.5-0.5 MHz). Overall, the results indicate that at frequencies of 0.5, 1.0 and 1.5 MHz, PFB NDs can be vaporized at moderate peak negative pressures (<2.0 MPa), pulse lengths and pulse repetition frequencies. This finding is encouraging for the use of PFB NDs as cavitation agents, as these conditions are comparable to those required to achieve therapeutic effects with microbubbles, unlike those reported for higher-boiling-point NDs. The differences between the optically and acoustically determined ADV thresholds, however, suggest that application-specific thresholds should be defined according to the biological/therapeutic effect of interest.

Synthetic Nanoclay Gels Do Not Cause Skin Irritation in Healthy Human Volunteers.

Synthetic clays are promising biomaterials for delivery of therapeutic molecules in regenerative medicine. However, before their use can be translated into clinical applications, their safety must be assessed in human volunteers. The aim of this study was to test the hypothesis that a synthetic nanoclay (LAPONITE) does not cause irritation to the human skin. To achieve this, a nanoclay gel at two different concentrations (1.5 and 3% w/v) was applied on the forearm of healthy volunteers for 24 h. 1% sodium lauryl sulfate (SLS) and 3% (w/v) polyacrylic acid were used as the positive and negative controls, respectively. The compromise in the skin barrier function was measured by trans-epidermal water loss (TEWL), erythema by spectroscopic measurements, and skin inflammatory biomarkers (IL-1α and IL-1RA) by the enzyme-linked immunosorbent assay. We found that the nanoclay caused no prolonged increase in TEWL, erythema, or induction of inflammatory cytokines. This was in contrast to 1% SLS, a known irritant, which induced significant increases in both skin erythema and TEWL. We conclude that the nanoclay is not an irritant and is thus suitable for therapeutic interventions at the skin surface.

The role of lithium in the osteogenic bioactivity of clay nanoparticles.

LAPONITE® clay nanoparticles are known to exert osteogenic effects on human bone marrow stromal cells (HBMSCs), most characteristically, an upregulation in alkaline phosphatase activity and increased calcium deposition. The specific properties of LAPONITE® that impart its bioactivity are not known. In this study the role of lithium, a LAPONITE® degradation product, was investigated through the use of lithium salts and lithium modified LAPONITE® formulations. In contrast to intact particles, lithium ions applied at concentrations equivalent to that present in LAPONITE®, failed to induce any significant increase in alkaline phosphatase (ALP) activity. Furthermore, no significant differences were observed in ALP activity with modified clay structures and the positive effect on osteogenic gene expression did not correlate with the lithium content of modified clays. These results suggest that other properties of LAPONITE® nanoparticles, and not their lithium content, are responsible for their bioactivity.

Tailoring the size of ultrasound responsive lipid-shelled nanodroplets by varying production parameters and environmental conditions.

Liquid perfluorocarbon nanodroplets (NDs) are an attractive alternative to microbubbles (MBs) for ultrasound-mediated therapeutic and diagnostic applications. ND size and size distribution have a strong influence on their behaviour in vivo, including extravasation efficiency, circulation time, and response to ultrasound stimulation. Thus, it is desirable to identify ways to tailor the ND size and size distribution during manufacturing. In this study phospholipid-coated NDs, comprising a perfluoro-n-pentane (PFP) core stabilised by a DSPC/PEG40s (1,2-distearoyl-sn-glycero-3-phosphocholine and polyoxyethylene(40)stearate, 9:1 molar ratio) shell, were produced in phosphate-buffered saline (PBS) by sonication. The effect of the following production-related parameters on ND size was investigated: PFP concentration, power and duration of sonication, and incorporation of a lipophilic fluorescent dye. ND stability was also assessed at both 4 °C and 37 °C. When a sonication pulse of 6 s and 15% duty cycle was employed, increasing the volumetric concentration of PFP from 5% to 15% v/v in PBS resulted in an increase in ND diameter from 215.8 ± 16.8 nm to 408.9 ± 171.2 nm. An increase in the intensity of sonication from 48 to 72 W (with 10% PFP v/v in PBS) led to a decrease in ND size from 354.6 ± 127.2 nm to 315.0 ± 100.5 nm. Increasing the sonication time from 20 s to 40 s (using a pulsed sonication with 30% duty cycle) did not result in a significant change in ND size (in the range 278-314 nm); however, when it was increased to 60 s, the average ND diameter reduced to 249.7 ± 9.7 nm, which also presented a significantly lower standard deviation compared to the other experimental conditions investigated (i.e., 9.7 nm vs. > 49.4 nm). The addition of the fluorescent dye DiI at different molar ratios did not affect the ND size distribution. NDs were stable at 4 °C for up to 6 days and at 37 °C for up to 110 min; however, some evidence of ND-to-MB phase transition was observed after 40 min at 37 °C. Finally, phase transition of NDs into MBs was demonstrated using a tissue-mimicking flow phantom under therapeutic ultrasound exposure conditions (ultrasound frequency: 0.5 MHz, acoustic pressure: 2-4 MPa, and pulse repetition frequency: 100 Hz).

ILC1 drive intestinal epithelial and matrix remodelling.

Organoids can shed light on the dynamic interplay between complex tissues and rare cell types within a controlled microenvironment. Here, we develop gut organoid cocultures with type-1 innate lymphoid cells (ILC1) to dissect the impact of their accumulation in inflamed intestines. We demonstrate that murine and human ILC1 secrete transforming growth factor ß1, driving expansion of CD44v6+ epithelial crypts. ILC1 additionally express MMP9 and drive gene signatures indicative of extracellular matrix remodelling. We therefore encapsulated human epithelial-mesenchymal intestinal organoids in MMP-sensitive, synthetic hydrogels designed to form efficient networks at low polymer concentrations. Harnessing this defined system, we demonstrate that ILC1 drive matrix softening and stiffening, which we suggest occurs through balanced matrix degradation and deposition. Our platform enabled us to elucidate previously undescribed interactions between ILC1 and their microenvironment, which suggest that they may exacerbate fibrosis and tumour growth when enriched in inflamed patient tissues.

Mental transportation mediates nostalgia's psychological benefits.

Nostalgizing confers social, existential, and self-oriented psychological benefits or functions. But how does the experience of nostalgia conduce to these functions? We propose that it does so, in part, through mental transportation, which involves mentally leaving one's current space and transporting oneself into a past event. We addressed the role of mental transportation in one daily diary study and two experiments (N = 514). By assessing daily experiences of nostalgia in Study 1, we found that, on days in which participants felt more nostalgic, they were more likely to experience mental transportation. Following a narrative induction of nostalgia, we assessed mental transportation (Studies 2 and 3) and the three putative nostalgia functions: social, existential, self-oriented (Study 3). Nostalgic (vs. control) participants reported greater mental transportation (Studies 2 and 3), which in turn was associated with stronger functions (Study 3). The findings portray mental transportation as a key mechanism underlying the psychological benefits of nostalgia.

Poly(N-isopropylacrylamide) based thin microgel films for use in cell culture applications.

Poly(N-isopropylacrylamide) (PNIPAm) is widely used to fabricate cell sheet surfaces for cell culturing, however copolymer and interpenetrated polymer networks based on PNIPAm have been rarely explored in the context of tissue engineering. Many complex and expensive techniques have been employed to produce PNIPAm-based films for cell culturing. Among them, spin coating has demonstrated to be a rapid fabrication process of thin layers with high reproducibility and uniformity. In this study, we introduce an innovative approach to produce anchored smart thin films both thermo- and electro-responsive, with the aim to integrate them in electronic devices and better control or mimic different environments for cells in vitro. Thin films were obtained by spin coating of colloidal solutions made by PNIPAm and PAAc nanogels. Anchoring the films to the substrates was obtained through heat treatment in the presence of dithiol molecules. From analyses carried out with AFM and XPS, the final samples exhibited a flat morphology and high stability to water washing. Viability tests with cells were finally carried out to demonstrate that this approach may represent a promising route to integrate those hydrogels films in electronic platforms for cell culture applications.

Injectable nanoclay gels for angiogenesis.

The retention and sustained activity of therapeutic proteins at delivery sites are goals of regenerative medicine. Vascular endothelial growth factor (VEGF) has significant potential in promoting the growth and regeneration of blood vessels but is intrinsically labile. This is exacerbated by the inflammatory microenvironments at sites requiring regeneration. For VEGF to be efficacious, it may require a carrier that stabilises it, protects it from degradation and retains it at the site of interest. In this study, we tested the hypothesis that injectable nanoclay gels comprising Laponite™ XLG (a synthetic hectorite clay) can stabilise VEGF and retain it in the active form for therapeutic delivery. To achieve this, VEGF was incorporated in Laponite gels and its activity tested at a range of concentrations using in vitro cell culture tubulogenesis assays and in vivo angiogenesis assays. We found that VEGF-Laponite gels enhanced tubulogenesis in a dose-dependent manner in vitro. When administered subcutaneously in vivo, Laponite was retained at the injection site for up to a period of three weeks and promoted a 4-fold increase in blood vessel formation compared with that of alginate or vehicle controls as confirmed by CD31 staining. Notably, as compared to alginate, Laponite gels did not release VEGF, indicating a strong interaction between the growth factor and the nanoclay and suggesting that Laponite enhancement of VEGF efficacy is due to its retention at the implantation site for a prolonged period. Our approach provides a robust method for the delivery of bioactive recombinant VEGF without the necessity for complex hydrogel or protein engineering. STATEMENT OF SIGNIFICANCE: In medicine, it is important to deliver drugs to a particular location in the body. Often, however, the drugs are quickly broken down and carried away in the blood before they can exert their effect. In this study, we used a type of synthetic clay, called Laponite™, to preserve a molecule, named VEGF, that stimulates the growth of blood vessels. Previously, we have been able to bind VEGF to the surface of clays, but the clay is not effective when injected or applied as a gel. Herein, we show that we can mix VEGF with the clay and that it strongly stimulates blood vessel growth. We speculate that this would be a useful material for skin wound healing.

Remodelling of human bone on the chorioallantoic membrane of the chicken egg: De novo bone formation and resorption.

Traditionally used as an angiogenic assay, the chorioallantoic membrane (CAM) assay of the chick embryo offers significant potential as an in vivo model for xenograft organ culture. Viable human bone can be cultivated on the CAM and increases in bone volume are evident; however, it remains unclear by what mechanism this change occurs and whether this reflects the physiological process of bone remodelling. In this study we tested the hypothesis that CAM-induced bone remodelling is a consequence of host and graft mediated processes. Bone cylinders harvested from femoral heads post surgery were placed on the CAM of green fluorescent protein (GFP)-chick embryos for 9 days, followed by micro computed tomography (µCT) and histological analysis. Three-dimensional registration of consecutive µCT-scans showed newly mineralised tissue in CAM-implanted bone cylinders, as well as new osteoid deposition histologically. Immunohistochemistry demonstrated the presence of bone resorption and formation markers (Cathepsin K, SOX9 and RUNX2) co-localising with GFP staining, expressed by avian cells only. To investigate the role of the human cells in the process of bone formation, decellularised bone cylinders were implanted on the CAM and comparable increases in bone volume were observed, indicating that avian cells were responsible for the bone mineralisation process. Finally, CAM-implantation of acellular collagen sponges, containing bone morphogenetic protein 2, resulted in the deposition of extracellular matrix and tissue mineralisation. These studies indicate that the CAM can respond to osteogenic stimuli and support formation or resorption of implanted human bone, providing a humanised CAM model for regenerative medicine research and a novel short-term in vivo model for tissue engineering and biomaterial testing.

Collective Cell Behavior in Mechanosensing of Substrate Thickness.

Extracellular matrix stiffness has a profound effect on the behavior of many cell types. Adherent cells apply contractile forces to the material on which they adhere and sense the resistance of the material to deformation-its stiffness. This is dependent on both the elastic modulus and the thickness of the material, with the corollary that single cells are able to sense underlying stiff materials through soft hydrogel materials at low (<10 µm) thicknesses. Here, we hypothesized that cohesive colonies of cells exert more force and create more hydrogel deformation than single cells, therefore enabling them to mechanosense more deeply into underlying materials than single cells. To test this, we modulated the thickness of soft (1 kPa) elastic extracellular-matrix-functionalized polyacrylamide hydrogels adhered to glass substrates and allowed colonies of MG63 cells to form on their surfaces. Cell morphology and deformations of fluorescent fiducial-marker-labeled hydrogels were quantified by time-lapse fluorescence microscopy imaging. Single-cell spreading increased with respect to decreasing hydrogel thickness, with data fitting to an exponential model with half-maximal response at a thickness of 3.2 µm. By quantifying cell area within colonies of defined area, we similarly found that colony-cell spreading increased with decreasing hydrogel thickness but with a greater half-maximal response at 54 µm. Depth-sensing was dependent on Rho-associated protein kinase-mediated cellular contractility. Surface hydrogel deformations were significantly greater on thick hydrogels compared to thin hydrogels. In addition, deformations extended greater distances from the periphery of colonies on thick hydrogels compared to thin hydrogels. Our data suggest that by acting collectively, cells mechanosense rigid materials beneath elastic hydrogels at greater depths than individual cells. This raises the possibility that the collective action of cells in colonies or sheets may allow cells to sense structures of differing material properties at comparatively large distances.

Polymersome nanoparticles for delivery of Wnt-activating small molecules.

Spatiotemporal control of drug delivery is important for a number of medical applications and may be achieved using polymersome nanoparticles (PMs). Wnt signalling is a molecular pathway activated in various physiological processes, including bone repair, that requires precise control of activation. Here, we hypothesise that PMs can be stably loaded with a small molecule Wnt agonist, 6-bromoindirubin-3'-oxime (BIO), and activate Wnt signalling promoting the osteogenic differentiation in human primary bone marrow stromal cells (BMSCs). We showed that BIO-PMs induced a 40% increase in Wnt signaling activation in reporter cell lines without cytotoxicity induced by free BIO. BMSCs incubated with BIO-PMs showed a significant up-regulation of the Wnt target gene AXIN2 (14 ±â€¯4 fold increase, P < 0.001) and a prolonged activation of the osteogenic gene RUNX2. We conclude that BIO-PMs could represent an innovative approach for the controlled activation of Wnt signaling for promoting bone regeneration after fracture.

Clay nanoparticles for regenerative medicine and biomaterial design: A review of clay bioactivity.

Clay nanoparticles, composites and hydrogels are emerging as a new class of biomaterial with exciting potential for tissue engineering and regenerative medicine applications. Clay particles have been extensively explored in polymeric nanocomposites for self-assembly and enhanced mechanical properties as well as for their potential as drug delivery modifiers. In recent years, a cluster of studies have explored cellular interactions with clay nanoparticles alone or in combination with polymeric matrices. These pioneering studies have suggested new and unforeseen utility for certain clays as bioactive additives able to enhance cellular functions including adhesion, proliferation and differentiation, most notably for osteogenesis. This review examines the recent literature describing the potential effects of clay-based nanomaterials on cell function and examines the potential role of key clay physicochemical properties in influencing such interactions and their exciting possibilities for regenerative medicine.