RESUMO
State-of-the-art fringe projection systems generate fringe patterns using digital light projectors (DLP). The axial uncertainty is limited by the smallest fringe period and is directly related to the pixel count. This results in limited accuracy of current DLP systems that affect applications such as in situ measurements for laser powder bed fusion systems, where a submillimeter fringe period is needed for field-of views larger than 500m m×500m m. This work presents a scalable fringe projection technique that enables the generation of stable fringe patterns over a large field of view spanning several meters while maintaining submillimeter fringe periods. This system uses geometric phase gratings to enable variable fringe spacing and fringe orientation capabilities. The system shears a coherent beam in the Fourier plane using a pair of geometric polarization gratings. The separation between the gratings directly affects the fringe spacing, and the orientation of the gratings affects the fringe orientation. The depth of focus is only limited by the coherence of the light source, enabling high fringe periods even on tilted planes. The system is designed with a single path configuration, making the system more robust to environmental noise. With a rotating linear polarizer, we demonstrate that phase-shifting methods could be employed to acquire phase information about the object. This paper employs a single-shot Fourier transform phase estimation technique to process the intensity maps acquired using projected fringe patterns. Further, we demonstrate the capabilities of the system to produce submillimeter fringe spacing and the ability to project fringes on larger scales for measurements.
RESUMO
The efficiency of reconstruction of complex wavefields in digital holography through shear interferometry has a direct correlation with the shears selected for image acquisition. Although studies to investigate the effect of shears have shown correlations between the selected shear set and the spatial and frequency contents of the reconstructed complex wavefield, to our best knowledge, not much information is available to provide a guide on how to select these shears optimally and what factors to be considered during this selection procedure. In this paper, we study the effect of shear parameters on the phase error through a series of simulations using a synthetic object wavefield and provide a range of shear parameters for optimal reconstruction. Further, we correlated the data by comparing the results with corresponding frequency information density maps.
RESUMO
This feature issue of Optics Express highlights 28 state-of-the-art articles that capture a snapshot of the recent developments in the field of freeform optics. As an introduction, the editors provide an overview of all published articles, which cover a broad range of topics in freeform optics. The wide variety of applications presented here demonstrates that freeform optics is a growing and vibrant field with many more innovations to come.
RESUMO
In [Appl. Opt.56, 7079 (2017)APOPAI0003-693510.1364/AO.56.007079], a phase-unwrapping algorithm has been reported that is based on the transport of intensity (TIE) equation. Section 3 of that manuscript presented one way to derive an analytical expression for the axial intensity derivative using the paraxial angular spectrum (AS) method. In the recent comment by Yoneda et al. [Appl. Opt.60, 7500 (2021)APOPAI0003-693510.1364/AO.417146], the authors misunderstand the utility of the angular spectrum method and conclude that the corresponding derivation is ambiguous. In this response, we take the opportunity to correct a typo that clarifies the calculation of the axial derivative of the intensity.
RESUMO
A smart brute-force double random-phase encoding attack is presented that takes advantage of an unreported vulnerability: the smoothness of mean squared error (MSE) and correlation coefficient (CC) curves in a key-sensitivity analysis. The vulnerability reported here is made visible in a key-sensitivity analysis. It is shown that a modular arithmetic pre-coding provides significant robustness against this form of attack because the pre-coding creates a highly nonlinear, highly oscillatory MSE and CC curve in the key space. Knowledge of this new vulnerability and how to prevent this in the first place provides a better understanding of the robustness of various double random-phase encoding designs.
RESUMO
A vibration-insensitive, single-shot phase-calibration method for phase-only spatial light modulators (SLM) is reported. The proposed technique uses a geometric phase lens to form a phase-shifting radial shearing interferometer to enable common-path measurements. This configuration has several advantages: (a) unlike diffraction-based SLM calibration techniques, this technique is robust against intensity errors due to misalignment; (b) unlike two-beam interferometers, this technique offers a high environmental stability; and (c) unlike intensity-based methods, the phase-shifting capability provides a phase uncertainty routinely in the order of ${2}\pi /100$2π/100. The experimental results show a significantly higher accuracy when compared to the diffraction-based approaches.
RESUMO
We present a multicolor fluorescence microscope system, under a selective plane illumination microscopy (SPIM) configuration, using three continuous wave-lasers and a single-channel-detection camera. The laser intensities are modulated with three time-delayed pulse trains that operate synchronously at one third of the camera frame rate, allowing a sequential excitation and an image acquisition of up to three different biomarkers. The feasibility of this imaging acquisition mode is demonstrated by acquiring single-plane multicolor images of living hyphae of Neurospora crassa. This allows visualizing simultaneously the localization and dynamics of different cellular components involved in apical growth in living hyphae. The configuration presented represents a noncommercial, cost-effective alternative microscopy system for the rapid and simultaneous acquisition of multifluorescent images and can be potentially useful for three-dimensional imaging of large biological samples.
Assuntos
Processamento de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodos , Microscopia de Fluorescência/instrumentação , Microscopia de Fluorescência/métodos , Neurospora crassa/metabolismo , Biomarcadores/metabolismo , Cor , Desenho de Equipamento , Corantes Fluorescentes/química , Proteínas de Fluorescência Verde/química , Lasers , Luz , Proteínas Luminescentes/química , Rodaminas/química , Proteína Vermelha FluorescenteRESUMO
The phase information of a complex field is routinely obtained using coherent measurement techniques as, e.g., interferometry or holography. The obtained measurement result is subject to a 2π ambiguity and is often referred to as wrapped phase. Phase-unwrapping algorithms (PUAs) are commonly employed to remove this ambiguity and, hence, obtain the absolute phase. However, implementing PUAs can be computationally intensive, and the accuracy of those algorithms may be low. Recently, the transport of intensity equation (TIE) has been proposed as a simple and practical alternative for obtaining the absolute phase map. Nevertheless, an efficient implementation of this technique has not yet been made. In this work, we propose an accurate solution for the TIE-based PUA that does not require the use of wave-propagation techniques, as previously reported TIE-based approaches. The proposed method calculates directly the axial derivative of the intensity from the wrapped phase when considering the correct propagation method. This is done in order to bypass the time-consuming wave-propagation techniques employed in similar methods. The analytical evaluation of this parameter allows obtaining an accurate solution when unwrapping the phase map with low computational effort. This work further introduces the use of the iterative TIE-PUA that, in a few steps, improves significantly the accuracy of the final absolute phase map, even in the presence of noise or aliasing of the wrapped data. The high accuracy and utility of the developed TIE-PUA technique is proven by both numerical simulations and experiments for various objects.
RESUMO
This Letter proposes an optical encryption technique that disguises the information with modular arithmetic concepts and time-varying noise components that are unknown to the receiver. Optical encryption systems that use these techniques produce a nondeterministic system response, as well as noise like image data that can easily be generated with ordinary spatial light modulators. The principle of this technique is demonstrated for the double random phase encoding (DRPE) method. The conventional DRPE method has major vulnerabilities for Dirac signal and plain signal attacks, making them impractical for secure encryption. It is shown that the proposed encryption technique provides a robustness against these types of attacks, allowing optical DRPE to be employed in secure encryptions. Moreover, applications of this Letter are not limited to DRPE alone but can also be adopted by other optical encryption techniques such as fractional Fourier transform and Fresnel-transform-based techniques.
RESUMO
A recent Letter [Opt. Lett.40, 3420 (2015)OPLEDP0146-959210.1364/OL.40.003420] reported a modified angular spectrum method that uses a sampling scheme based on a compact space-bandwidth product representation. That technique is useful for focusing and defocusing propagation cases and is generalized here for the case of propagation between two defocus planes. The proposed method employs paraxial spherical phase factors and modified propagation kernels to reduce the size of the numerical space-bandwidth product needed for wave field calculations. A Wigner distribution analysis is carried out in order to ensure high accuracy of the calculations in the entire computational domain. This is achieved by analyzing the evolution of the generalized space-bandwidth product when passing through the propagation algorithm for various space-frequency constraints. The results allow the derivations of sampling criteria, and, despite this, also show that a small amount of space/frequency zero padding significantly extends the capability of the recently reported modified angular spectrum method. Simulations validate the high accuracy of that method and verify a computational and memory gain of more than two orders of magnitude when comparing this technique with the conventional angular spectrum method.
RESUMO
Rigorous propagation methods enable diffraction calculations at high NA. However, for the case of large propagation distances and full NA calculations of a signal, common solutions require zero padding or upsampling. This Letter overcomes these problems by introducing a sampling scheme based on compact space bandwidth product representation, which adjusts the sampling frequency of input and propagated field according to the evolution of the generalized space bandwidth product. This sampling concept allows proposing a novel AS method enabling high efficiency, high accuracy, and high-NA diffraction computations at larger propagation distances without need of zero padding or upsampling. The method has several advantages: (1) high accuracy for larger propagation distances; (2) reduced sampling with minimal computation effort; (3) zooming capability; and (4) both focusing and defocusing propagations possible.
RESUMO
An iterative single-beam wave field reconstruction technique that employs both non-paraxial, wave propagation based and paraxial deterministic phase retrieval techniques is presented. This approach overcomes two major obstacles that exist in the current state of the art techniques: iterative methods do not reconstruct slowly varying wave fields due to slow convergence and stagnation, and deterministic methods have paraxial limits, making the reconstructions of quickly varying object features impossible. In this work, a hybrid approach is reported that uses paraxial wave field corrections within iterative phase retrieval solvers. This technique is suitable for cases ranging from slow to fast varying wave fields, and unlike the currently available methods, can also reconstruct measurement objects with different regions of both slowly and quickly varying object features. It is further shown that this technique gives a higher accuracy than current single-beam phase retrieval techniques, and in comparison to the iterative methods, has a higher convergence speed.
RESUMO
A quantitative phase measuring technique is presented that estimates the object phase from a series of phase shifted interferograms that are obtained in a common-path configuration with unknown phase shifts. The derived random phase shifting algorithm for common-path interferometers is based on the Generalized Phase Contrast theory [pl. Opt.40(2), 268 (2001)10.1063/1.1404846], which accounts for the particular image formation and includes effects that are not present in two-beam interferometry. It is shown experimentally that this technique can be used within common-path configurations employing nonlinear liquid crystal materials as self-induced phase filters for quantitative phase imaging without the need of phase shift calibrations. The advantages of such liquid crystal elements compared to spatial light modulator based solutions are given by the cost-effectiveness, self-alignment, and the generation of diminutive dimensions of the phase filter size, giving unique performance advantages.
RESUMO
Recent advances in multiwavelength interferometry techniques [Appl. Opt.52, 5758 (2013)] give new insights to phase unwrapping problems and allow the fringe order information contained in the measured phase to be extracted with low computational effort. This work introduces an algebraic solution to the phase unwrapping problem that allows the direct calculation of the unknown integer fringe order. The procedure resembles beat-wavelength approaches, but provides greater flexibility in choosing the measurement wavelengths, a larger measurement range, and a higher robustness against noise, due to the ability to correct for errors during the calculation.
RESUMO
In this work, an optimum plane selection methodology is reported that can be applied to a wide range of single-beam phase retrieval techniques, based on the contrast transfer function. It is shown that the optimum measurement distances obtained by this method form a geometric series that maximizes the range of spatial frequencies to be recovered using a minimum number of planes. This allows a noise-robust phase reconstruction that does not rely on regularization techniques, i.e., an extensive search for a regularization parameter is avoided. Measurement systems that employ this optimization criteria give an instant deterministic noise-robust phase reconstruction with higher accuracy, and enable the phase retrieval of the entire object spectrum, including lower frequency components.
RESUMO
Multiwavelength interferometry provides a solution to a number of applications in metrology for the measurement of optical path differences longer than the source wavelength. To this day, the method of excess fractions (EF) has proved to provide very long, unambiguous measurement ranges with the highest reliability for a given set of wavelengths and level of phase noise. This is achieved because EF combines the individual phase values in an equivalent least-square problem and evaluates the correspondence for all possible solutions. However, this procedure can be slow for a number of applications. In this paper, an analytical solution for EF is presented that allows the direct calculation of the unknown integer fringe order. It is shown that this solution is consistent with the other phase unwrapping approaches as beat wavelength or Chinese remainder theorem-based solutions, but moreover, it can be understood as a unified representation and solution of the fringe order problem.
RESUMO
A previous Letter by Pedrini et al. [Opt. Lett. 30, 833 (2005)] proposed an iterative single-beam wavefront reconstruction algorithm that uses a sequence of interferograms recorded at different planes. In this Letter, the use of relaxation and multiresolution strategies is investigated in terms of accuracy and computational effort. It is shown that the convergence rate of the conventional iterative algorithm can be significantly improved with the use of relaxation techniques combined with a hierarchy of downsampled intensities that are used within a preconditioner. These techniques prove to be more robust, to achieve a higher accuracy, and to overcome the stagnation problem met in the iterative wavefront reconstruction.
RESUMO
The angular spectrum (AS) method is a popular solution to the Helmholtz equation without the use of approximations. Modified band-limited AS methods are of particular interest for the cases of high-off-axis and large distance propagation problems, because conventional AS methods are impractical due to requirements regarding memory and computational effort. However, these techniques make use of rectangular-shaped filters that introduce ringing artifacts in the calculated field that are related to the Gibbs phenomenon. This work proposes AS algorithms based on a smooth band-limiting filter for accurate field computation as well as techniques that evaluate only nonzero components of the field. This enables accurate field calculations with an acceptable level of computational effort that cannot be offered by current AS methods reported in the scientific literature.
RESUMO
The angular spectrum (AS) method is a popular solution to the Helmholtz Equation without the use of approximations. In this work, new criteria on sampling requirements are derived using the Wigner distribution (WD). It is shown that for the case of high numerical aperture the conventional AS method requires a very large amount of zero-padding, making it impractical due to requirements on memory and computational effort. This work proposes the use of a modified AS algorithm that evaluates only non-zero components of the field. The results obtained from the WD combined with the modified AS algorithm enable an accurate and efficient field computation for cases where the conventional AS method cannot be implemented.
RESUMO
Multiwavelength interferometry (MWI) is a well established technique in the field of optical metrology. Previously, we have reported a theoretical analysis of the method of excess fractions that describes the mutual dependence of unambiguous measurement range, reliability, and the measurement wavelengths. In this paper wavelength, selection strategies are introduced that are built on the theoretical description and maximize the reliability in the calculated fringe order for a given measurement range, number of wavelengths, and level of phase noise. Practical implementation issues for an MWI interferometer are analyzed theoretically. It is shown that dispersion compensation is best implemented by use of reference measurements around absolute zero in the interferometer. Furthermore, the effects of wavelength uncertainty allow the ultimate performance of an MWI interferometer to be estimated.