RESUMO
Though myosins share a structurally conserved motor domain, single amino acid variations of active site elements, including the P-loop, switch-1 and switch-2, which act as nucleotide sensors, can substantially determine the kinetic signature of a myosin, i.e., to either perform fast movement or enable long-range transport and tension generation. Switch-2 essentially contributes to the ATP hydrolysis reaction and determines product release. With few exceptions, class-1 myosin harbor a tyrosine in the switch-2 consensus sequence DIYGFE, at a position where class-2 myosins and a selection of myosins from other classes have a substitution. Here, we addressed the role of the tyrosine in switch-2 of class-1 myosins as potential determinant of the duty ratio. We generated constitutively active motor domain constructs of two class-1 myosins from the social amoeba Dictyostelium discoideum, namely, Myo1E, a high duty ratio myosin and Myo1B, a low duty ratio myosin. In Myo1E we introduced mutation Y388F and in Myo1B mutation F387Y. The detailed functional characterization by steady-state and transient kinetic experiments, combined with in vitro motility and landing assays revealed an almost reciprocal relationship of a number of critical kinetic parameters and equilibrium constants between wild-type and mutants that dictate the lifetime of the strongly actin-attached states of myosin. The Y-to-F mutation increased the duty ratio of Moy1B by almost one order of magnitude, while the introduction of the phenylalanine in switch-2 of Myo1E transformed the myosin into a low duty ratio motor. These data together with structural considerations propose a role of switch-2 in fine-tuning ADP release through a mechanism, where the class-specific tyrosine together with surrounding residues contributes to the coordination of Mg2+ and ADP. Our results highlight the importance of conserved switch-2 residues in class-1 myosins for efficient chemo-mechanical coupling, revealing that switch-2 is important to adjust the duty ratio of the amoeboid class-1 myosins for performing movement, transport or gating functions.
RESUMO
Hygroresponsive materials exhibit a complex structure-to-property relationship. The interactions of water within these materials under varying hygric and mechanical loads play a crucial role in their macroscopic deformation and final application. While multiple models are available in literature, many lack a comprehensive physical understanding of these phenomena. In this paper, we introduce a stick-slip fiber bundle model that captures the fundamental behaviors of hygroresponsive materials. We incorporate moisture-dependent elements and rules governing the initiation and relaxation of slip strains as well as failure to the statistical approach offered by fiber bundle models. The additional features are based on well-founded interpretations of the structure-to-property relationship in cellulosic materials. Slip strains are triggered by changes in load and moisture, as well as by creep deformations. When subjected to moisture cycles, the model accumulates slip strains, resulting in mechanosorptive behavior. When the load is removed, slip strains are partially relaxed, and subsequent moisture cycles trigger further relaxation, as expected from observations with mechanosorptive material. Importantly, these slip strains are not considered plastic strains; instead, they are unified, nonlinear frozen strains, activated by various stimuli. Failure of fibers is defined by a critical number of slip events allowing for an integrated simulation from intact, via damaged, failed states. We investigate the transition between these regimes upon changes in the hygric and mechanical loading history for relevant parameter ranges. Our enhanced stick-slip fiber bundle model increases the understanding of the intricate behavior of hygroresponsive materials and contributes to a more robust framework for analyzing and interpreting their properties.
RESUMO
A multipurpose imaging x-ray crystal spectrometer is developed for the high energy density instrument of the European X-ray Free Electron Laser. The spectrometer is designed to measure x rays in the energy range of 4-10 keV, providing high-resolution, spatially resolved spectral measurements. A toroidally bent germanium (Ge) crystal is used, allowing x-ray diffraction from the crystal to image along a one-dimensional spatial profile while spectrally resolving along the other. A detailed geometrical analysis is performed to determine the curvature of the crystal. The theoretical performance of the spectrometer in various configurations is calculated by ray-tracing simulations. The key properties of the spectrometer, including the spectral and spatial resolution, are demonstrated experimentally on different platforms. Experimental results prove that this Ge spectrometer is a powerful tool for spatially resolved measurements of x-ray emission, scattering, or absorption spectra in high energy density physics.
RESUMO
The sensory hairs of the Venus flytrap (Dionaea muscipula Ellis) detect mechanical stimuli imparted by their prey and fire bursts of electrical signals called action potentials (APs). APs are elicited when the hairs are sufficiently stimulated and two consecutive APs can trigger closure of the trap. Earlier experiments have identified thresholds for the relevant stimulus parameters, namely the angular displacement [Formula: see text] and angular velocity [Formula: see text]. However, these experiments could not trace the deformation of the trigger hair's sensory cells, which are known to transduce the mechanical stimulus. To understand the kinematics at the cellular level, we investigate the role of two relevant mechanical phenomena: viscoelasticity and intercellular fluid transport using a multi-scale numerical model of the sensory hair. We hypothesize that the combined influence of these two phenomena and [Formula: see text] contribute to the flytrap's rate-dependent response to stimuli. In this study, we firstly perform sustained deflection tests on the hair to estimate the viscoelastic material properties of the tissue. Thereafter, through simulations of hair deflection tests at different loading rates, we were able to establish a multi-scale kinematic link between [Formula: see text] and the cell wall stretch [Formula: see text]. Furthermore, we find that the rate at which [Formula: see text] evolves during a stimulus is also proportional to [Formula: see text]. This suggests that mechanosensitive ion channels, expected to be stretch-activated and localized in the plasma membrane of the sensory cells, could be additionally sensitive to the rate at which stretch is applied.
Assuntos
Droseraceae/fisiologia , Transporte Biológico , Fenômenos Biomecânicos/fisiologia , Simulação por Computador , Elasticidade , Análise de Elementos Finitos , Modelos Biológicos , Estimulação Física , Reologia , ViscosidadeRESUMO
Freestanding columns, built out of nothing but loose gravel and continuous strings can be stable even at several meters in height and withstand vertical loads high enough to severely fragment grains of the column core. We explain this counter-intuitive behavior through dynamic simulations with polyhedral rigid particles and elastic wire chains. We evaluate the fine structure of the particle contact networks, as well as confining forces and reveal fundamental intrinsic differences to the well-studied case of confining silos.
RESUMO
We present the usage of two-layer targets with laser-illuminated front-side microstructures for x-ray backlighter applications. The targets consisted of a silicon front layer and copper back side layer. The structured layer was irradiated by the 500-fs PHELIX laser with an intensity above 10^{20}Wcm^{-2}. The total emission and one-dimensional extent of the copper Kα x-ray emission as well as a wide spectral range between 7.9 and 9.0 keV were recorded with an array of crystal spectrometers. The measurements show that the front-side modifications of the silicon in the form of conical microstructures maintain the same peak brightness of the Kα emission as flat copper foils while suppressing the thermal emission background significantly. The observed Kα source sizes can be influenced by tilting the conical microstructures with respect to the laser axis. Overall, the recorded copper Kα photon yields were in the range of 10^{11}sr^{-1}, demonstrating the suitability of these targets for probing applications without subjecting the probed material to additional heating from thermal line emission.
RESUMO
Wood-derived cellulose materials obtained by structure-retaining delignification are attracting increasing attention due to their excellent mechanical properties and great potential to serve as renewable and CO2 storing cellulose scaffolds for advanced hybrid materials with embedded functionality. Various delignification protocols and a multitude of further processing steps including polymer impregnation and densification are applied resulting in a large range of properties. However, treatment optimization requires a more comprehensive characterization of the developed materials in terms of structure, chemical composition, and mechanical properties for faster progress in the field. Herein, the current protocols for structure-retaining delignification are reviewed and the emphasis is placed on the mechanical characterization at different hierarchical levels of the cellulose scaffolds by experiments and modeling to reveal the underlying structure-property relationships.
RESUMO
Originally described by Davis et al in 2013, 4D-Digital Subtraction Angiography (4D-DSA) has developed into a commercially available application of DSA in the angiography suite. 4D-DSA provides the user with 3D time-resolved images, allowing observation of a contrast bolus at any desired viewing angle through the vasculature and at any time point during the acquisition (any view at any time). 4D-DSA mitigates some limitations that are intrinsic to both 2D- and 3D-DSA images. The clinical applications for 4D-DSA include evaluations of AVMs and AVFs, intracranial aneurysms, and atherosclerotic occlusive disease. Recent advances in blood flow quantification using 4D-DSA indicate that these data provide both the velocity and geometric information necessary for the quantification of blood flow. In this review, we will discuss the development, acquisition, reconstruction, and current neurovascular applications of 4D-DSA volumes.
Assuntos
Angiografia Digital/métodos , Encefalopatias/diagnóstico por imagem , Imageamento Tridimensional/métodos , Neuroimagem/métodos , Feminino , Humanos , MasculinoRESUMO
Bi-layered composites capable of self-shaping are of increasing relevance to science and engineering. They can be made out of anisotropic materials that are responsive to changes in a state variable, e.g. wood, which swells and shrinks by changes in moisture. When extensive bending is desired, such bilayers are usually designed as cross-ply structures. However, the nature of cross-ply laminates tends to prevent changes of the Gaussian curvature so that a plate-like geometry of the composite will be partly restricted from shaping. Therefore, an effective approach for maximizing bending is to keep the composite in a narrow strip configuration so that Gaussian curvature can remain constant during shaping. This represents a fundamental limitation for many applications where self-shaped double-curved structures could be beneficial, e.g. in timber architecture. In this study, we propose to achieve double-curvature by gridshell configurations of narrow self-shaping wood bilayer strips. Using numerical mechanical simulations, we investigate a parametric phase-space of shaping. Our results show that double curvature can be achieved and that the change in Gaussian curvature is dependent on the system's geometry. Furthermore, we discuss a novel architectural application potential in the form of self-erecting timber gridshells.
RESUMO
The carnivorous Venus flytrap catches prey by an ingenious snapping mechanism. Based on work over nearly 200 years, it has become generally accepted that two touches of the trap's sensory hairs within 30 s, each one generating an action potential, are required to trigger closure of the trap. We developed an electromechanical model, which, however, suggests that under certain circumstances one touch is sufficient to generate two action potentials. Using a force-sensing microrobotic system, we precisely quantified the sensory-hair deflection parameters necessary to trigger trap closure and correlated them with the elicited action potentials in vivo. Our results confirm the model's predictions, suggesting that the Venus flytrap may be adapted to a wider range of prey movements than previously assumed.
Assuntos
Droseraceae/fisiologia , Percepção do Tato/fisiologia , Potenciais de Ação/fisiologia , Fenômenos Biomecânicos , Eletricidade , Modelos Biológicos , Estimulação Física , TorqueRESUMO
This corrects the article DOI: 10.1103/PhysRevLett.120.025002.
RESUMO
An amendment to this paper has been published and can be accessed via a link at the top of the paper.
RESUMO
Insects fall prey to the Venus flytrap (Dionaea muscipula) when they touch the sensory hairs located on the flytrap lobes, causing sudden trap closure. The mechanical stimulus imparted by the touch produces an electrical response in the sensory cells of the trigger hair. These cells are found in a constriction near the hair base, where a notch appears around the hair's periphery. There are mechanosensitive ion channels (MSCs) in the sensory cells that open due to a change in membrane tension; however, the kinematics behind this process is unclear. In this study, we investigate how the stimulus acts on the sensory cells by building a multi-scale hair model, using morphometric data obtained from µ-CT scans. We simulated a single-touch stimulus and evaluated the resulting cell wall stretch. Interestingly, the model showed that high stretch values are diverted away from the notch periphery and, instead, localized in the interior regions of the cell wall. We repeated our simulations for different cell shape variants to elucidate how the morphology influences the location of these high-stretch regions. Our results suggest that there is likely a higher mechanotransduction activity in these 'hotspots', which may provide new insights into the arrangement and functioning of MSCs in the flytrap.
Assuntos
Droseraceae/fisiologia , Insetos/fisiologia , Mecanotransdução Celular/fisiologia , Folhas de Planta/fisiologia , Algoritmos , Animais , Fenômenos Biomecânicos , Estruturas da Membrana Celular/fisiologia , Droseraceae/citologia , Fenômenos Eletromagnéticos , Folhas de Planta/citologia , Transdução de Sinais/fisiologiaRESUMO
BACKGROUND AND PURPOSE: Quantification of blood flow using a 4D-DSA would be useful in the diagnosis and treatment of cerebrovascular diseases. A protocol optimizing identification of density variations in the time-density curves of a 4D-DSA has not been defined. Our purpose was to determine the contrast injection protocol most likely to result in the optimal pulsatility signal strength. MATERIALS AND METHODS: Two 3D-printed patient-specific models were used and connected to a pulsatile pump and flow system, which delivered 250-260 mL/min to the model. Contrast medium (Isovue, 370 mg I/mL, 75% dilution) was injected through a 6F catheter positioned upstream from the inlet of the model. 4D-DSA acquisitions were performed for the following injection rates: 1.5, 2.0, 2.5, 3.0 and 3.5 mL/s for 8 seconds. To determine pulsatility, we analyzed the time-density curve at the inlets using the oscillation amplitude and a previously described numeric metric, the sideband ratio. Vascular geometry from 4D-DSA reconstructions was compared with ground truth and micro-CT measurements of the model. Dimensionless numbers that characterize hemodynamics, Reynolds and Craya-Curtet, were calculated for each injection rate. RESULTS: The strongest pulsatility signal occurred with the 2.5 mL/s injections. The largest oscillation amplitudes were found with 2.0- and 2.5-mL/s injections. Geometric accuracy was best preserved with injection rates of >1.5 mL/s. CONCLUSIONS: An injection rate of 2.5 mL/s provided the strongest pulsatility signal in the 4D-DSA time-density curve. Geometric accuracy was best preserved with injection rates above 1.5 mL/s. These results may be useful in future in vivo studies of blood flow quantification.
Assuntos
Algoritmos , Angiografia Digital/métodos , Hemodinâmica/fisiologia , Modelos Cardiovasculares , Neuroimagem/métodos , Transtornos Cerebrovasculares/diagnóstico por imagem , Meios de Contraste , HumanosRESUMO
The growing timber manufacturing industry faces challenges due to increasing geometric complexity of architectural designs. Complex and structurally efficient curved geometries are nowadays easily designed but still involve intensive manufacturing and excessive machining. We propose an efficient form-giving mechanism for large-scale curved mass timber by using bilayered wood structures capable of self-shaping by moisture content changes. The challenge lies in the requirement of profound material knowledge for analysis and prediction of the deformation in function of setup and boundary conditions. Using time- and moisture-dependent mechanical simulations, we demonstrate the contributions of different wood-specific deformation mechanisms on the self-shaping of large-scale elements. Our results outline how to address problems such as shape prediction, sharp moisture gradients, and natural variability in material parameters in light of an efficient industrial manufacturing.
RESUMO
We report on the buckling and subsequent collapse of orthotropic elastic spherical shells under volume and pressure control. Going far beyond what is known for isotropic shells, a rich morphological phase space with three distinct regimes emerges upon variation of shell slenderness and degree of orthotropy. Our extensive numerical simulations are in agreement with experiments using fabricated polymer shells. The shell buckling pathways and corresponding strain energy evolution are shown to depend strongly on material orthotropy. We find surprisingly robust orthotropic structures with strong similarities to stomatocytes and tricolpate pollen grains, suggesting that the shape of several of Nature's collapsed shells could be understood from the viewpoint of material orthotropy.
RESUMO
Laser-wakefield accelerators (LWFAs) are high acceleration-gradient plasma-based particle accelerators capable of producing ultra-relativistic electron beams. Within the strong focusing fields of the wakefield, accelerated electrons undergo betatron oscillations, emitting a bright pulse of X-rays with a micrometer-scale source size that may be used for imaging applications. Non-destructive X-ray phase contrast imaging and tomography of heterogeneous materials can provide insight into their processing, structure, and performance. To demonstrate the imaging capability of X-rays from an LWFA we have examined an irregular eutectic in the aluminum-silicon (Al-Si) system. The lamellar spacing of the Al-Si eutectic microstructure is on the order of a few micrometers, thus requiring high spatial resolution. We present comparisons between the sharpness and spatial resolution in phase contrast images of this eutectic alloy obtained via X-ray phase contrast imaging at the Swiss Light Source (SLS) synchrotron and X-ray projection microscopy via an LWFA source. An upper bound on the resolving power of 2.7 ± 0.3 µm of the LWFA source in this experiment was measured. These results indicate that betatron X-rays from laser wakefield acceleration can provide an alternative to conventional synchrotron sources for high resolution imaging of eutectics and, more broadly, complex microstructures.
RESUMO
We study fragment size distributions after crushing single and many particles under uniaxial compression inside a cylindrical container by means of numerical simulations. Under the assumption that breaking goes through the bulk of the particle we obtain the size distributions of fragments for both cases after large displacements. For the single-particle crushing, this fragmentation mechanism produces a log-normal size distribution, which deviates from the power-law distribution of fragment sizes for the packed bed. We show that as the breaking process evolves, a power-law dependency on the displacement is present for the single grain, while for the many-grains system, the distribution converges to a steady state. We further investigate the force networks and the average coordination number as a function of the particle size, which gives information about the origin of the power-law distributions for the granular assembly under uniaxial compression.
RESUMO
Compact, bright neutron sources are opening up several emerging applications including detection of nuclear materials for national security applications. At Los Alamos National Laboratory, we have used a short-pulse laser to accelerate deuterons in the relativistic transparency regime. These deuterons impinge on a beryllium converter to generate neutrons. During the initial experiments where these neutrons were used for active interrogation of uranium and plutonium, we observed ß-delayed neutron production from decay of 9Li, formed by the high-energy deuteron bombardment of the beryllium converter. Analysis of the delayed neutrons provides novel evidence of the divergence of the highest energy portion of the deuterons (i.e., above 10 MeV/nucleon) from the laser axis, a documented feature of the breakout afterburner laser-plasma ion acceleration mechanism. These delayed neutrons form the basis of non-intrusive diagnostics for determining the features of deuteron acceleration as well as monitoring neutron production for the next generation of laser-driven neutron sources.