RESUMO
Cations such as K+ play a key part in the CO2 electroreduction reaction, but their role in the reaction mechanism is still in debate. Here, we use a highly symmetric Ni-N4 structure to selectively probe the mechanistic influence of K+ and identify its interaction with chemisorbed CO2-. Our electrochemical kinetics study finds a shift in the rate-determining step in the presence of K+. Spectral evidence of chemisorbed CO2- from in-situ X-ray absorption spectroscopy and in-situ Raman spectroscopy pinpoints the origin of this rate-determining step shift. Grand canonical potential kinetics simulations - consistent with experimental results - further complement these findings. We thereby identify a long proposed non-covalent interaction between K+ and chemisorbed CO2-. This interaction stabilizes chemisorbed CO2- and thus switches the rate-determining step from concerted proton electron transfer to independent proton transfer. Consequently, this rate-determining step shift lowers the reaction barrier by eliminating the contribution of the electron transfer step. This K+-determined reaction pathway enables a lower energy barrier for CO2 electroreduction reaction than the competing hydrogen evolution reaction, leading to an exclusive selectivity for CO2 electroreduction reaction.
RESUMO
The precise regulation of single-atom catalysts (SACs) with the desired local chemical environment is vital to elucidate the relationship between the SACs structure and the catalytic performance. The debate on the effect of the local coordination environment is quite complicated even for the SACs with the same composition and chemical nature, calling for increased attention on the regulation of second coordination shell. For oxide-supported SACs, it remains a significant challenge to precisely manipulate the second coordination shell of single atoms supported on oxides due to the structural robustness of oxides. Here, Ir single atoms are anchored on NiO supports via different bonding strategies, resulting in the diverse Ir-O-Ni coordination numbers for Ir sites. Specifically, Ir1/NiO, Ir1-NiO, and Ir1@NiO SACs with increasing Ir-O-Ni coordination numbers of 3, 4, and 5 were synthesized, respectively. We found that the activity of the three samples towards oxygen evolution reaction (OER) exhibited a volcano-shaped relationship with the Ir-O-Ni coordination number, with Ir1-NiO showing the lowest overpotential of 225 mV at 10 mA cm-2. Mechanism investigations indicate that the moderate coordination number of Ir-O-Ni in Ir1-NiO creates the higher occupied Ir dz2 orbital, weakening the adsorption strength for *OOH intermediates and thereby enhancing the OER activity.
RESUMO
Scarce and expensive iridium oxide is still the cornerstone catalyst of polymer-electrolyte membrane electrolyzers for green hydrogen production because of its exceptional stability under industrially relevant oxygen evolution reaction (OER) conditions. Earth-abundant transition metal oxides used for this task, however, show poor long-term stability. We demonstrate here the use of nitrogen-doped cobalt oxide as an effective iridium substitute. The catalyst exhibits a low overpotential of 240 mV at 10 mA cm-2 and negligible activity decay after 1000 h of operation in an alkaline electrolyte. Incorporation of nitrogen dopants not only triggers the OER mechanism switched from the traditional adsorbate evolution route to the lattice oxygen oxidation route but also achieves oxygen nonbonding (ONB) states as electron donors, thereby preventing structural destabilization. In a practical anion-exchange membrane water electrolyzer, this catalyst at anode delivers a current density of 1000 mA cm-2 at 1.78 V and an electrical efficiency of 47.8 kW-hours per kilogram hydrogen.
RESUMO
Sonodynamic therapy (SDT), as a novel non-invasive cancer treatment modality derived from photodynamic therapy (PDT), has drawn much attention due to its unique advantages for the treatment of deep tumors. Zinc-based complexes have shown great clinical prospect in PDT due to their excellent photodynamic activity and biosafety. However, their application in SDT has lagged seriously behind. Exploring efficient zinc-based complexes as sono-sensitizers remains an appealing but significantly challenging task. Herein, we develop a hydrazone ligand-based zinc complex (ZnAMTC) for SDT of tumors in vitro and in vivo. ZnAMTC was facilely synthesized via a two-step reaction from low-cost raw materials without tedious purification. It shows negligible dark toxicity and can produce singlet oxygen (1O2) under ultrasound (US) irradiation, exhibiting high sono-cytotoxicity to various cancer cells. Mechanism studies show that ZnAMTC can effectively reduce the levels of glutathione (GSH) and glutathione peroxidase 4 (GPX4) under US irradiation and later cause ferroptosis of cancer cells. In vivo studies further demonstrate that ZnAMTC exhibits efficient tumor growth inhibition under US irradiation and has good biosafety. This work provides useful insights into the design of first-row transition metal complexes for SDT application.
RESUMO
Characterized by their pivotal roles in cell-to-cell communication, cell proliferation, and immune regulation during tissue repair, exosomes have emerged as a promising avenue for "cell-free therapy" in clinical applications. Hydrogels, possessing commendable biocompatibility, degradability, adjustability, and physical properties akin to biological tissues, have also found extensive utility in tissue engineering and regenerative repair. The synergistic combination of exosomes and hydrogels holds the potential not only to enhance the efficiency of exosomes but also to collaboratively advance the tissue repair process. This review has summarized the advancements made over the past decade in the research of hydrogel-exosome systems for regenerating various tissues including skin, bone, cartilage, nerves and tendons, with a focus on the methods for encapsulating and releasing exosomes within the hydrogels. It has also critically examined the gaps and limitations in current research, whilst proposed future directions and potential applications of this innovative approach.
RESUMO
The rational design of hydrogel materials to modulate the immune microenvironment has emerged as a pivotal approach in expediting tissue repair and regeneration. Within the immune microenvironment, an array of immune cells exists, with macrophages gaining prominence in the field of tissue repair and regeneration due to their roles in cytokine regulation to promote regeneration, maintain tissue homeostasis, and facilitate repair. Macrophages can be categorized into two types: classically activated M1 (pro-inflammatory) and alternatively activated M2 (anti-inflammatory and pro-repair). By regulating the physical and chemical properties of hydrogels, the phenotypic transformation and cell behavior of macrophages can be effectively controlled, thereby promoting tissue regeneration and repair. A full understanding of the interaction between hydrogels and macrophages can provide new ideas and methods for future tissue engineering and clinical treatment. Therefore, this paper reviews the effects of hydrogel components, hardness, pore size, and surface morphology on cell behaviors such as macrophage proliferation, migration, and phenotypic polarization, and explores the application of hydrogels based on macrophage immune regulation in skin, bone, cartilage, and nerve tissue repair. Finally, the challenges and future prospects of macrophage-based immunomodulatory hydrogels are discussed.
Assuntos
Hidrogéis , Macrófagos , Regeneração , Cicatrização , Hidrogéis/química , Macrófagos/imunologia , Macrófagos/efeitos dos fármacos , Humanos , Animais , Regeneração/imunologia , Cicatrização/efeitos dos fármacos , Cicatrização/imunologia , Engenharia Tecidual , Imunomodulação/efeitos dos fármacosRESUMO
Electrochemical C-N coupling reaction based on carbon dioxide and nitrate have been emerged as a new "green synthetic strategy" for the synthesis of urea, but the catalytic efficiency is seriously restricted by the inherent scaling relations of adsorption energies of the active sites, the improvement of catalytic activity is frequently accompanied by the decrease in selectivity. Herein, a doping engineering strategy was proposed to break the scaling relationship of intermediate binding and minimize the kinetic barrier of C-N coupling. A thus designed SrCo0.39Ru0.61O3-δ catalyst achieves a urea yield rate of 1522â µg h-1 mgcat. -1 and faradic efficiency of 34.1 % at -0.7â V versus reversible hydrogen electrode. A series of characterizations revealed that Co doping not only induces lattice distortion but also creates rich oxygen vacancies (OV) in the SrRuO3. The oxygen vacancies weaken the adsorption of *CO and *NH2 intermediates on the Co and Ru sites respectively, and the strain effects over the Co-Ru dual sites promoting the occurrence of C-N coupling of the two monomers instead of selective hydrogenating to form by-products. This work presents an insight into molecular coupling reactions towards urea synthesis via the doping engineering on SrRuO3.
RESUMO
The intricate protonation process in carbon dioxide reduction usually makes the product unpredictable. Thus, it is significant to control the reactive intermediates to manipulate the reaction steps. Here, we propose that the synergistic La-Ti active sites in the N-La2Ti2O7 nanosheets enable the highly selective carbon dioxide photoreduction into methane. In the photoreduction of CO2 over N-La2Ti2O7 nanosheets, in situ Fourier transform infrared spectra are utilized to monitor the *CH3O intermediate, pivotal for methane production, whereas such monitoring is not conducted for La2Ti2O7 nanosheets. Also, theoretical calculations testify to the increased charge densities on the Ti and La atoms and the regulated formation energy barrier of *CO and *CH3O intermediates by the constructed synergistic active sites. Accordingly, the methane formation rate of 7.97 µL h-1 exhibited by the N-La2Ti2O7 nanosheets, along with an electron selectivity of 96.6%, exceeds that of most previously reported catalysts under similar conditions.
RESUMO
Electrochemically reconstructed Cu-based catalysts always exhibit enhanced CO2 electroreduction performance; however, it still remains ambiguous whether the reconstructed Cu vacancies have a substantial impact on CO2-to-C2+ reactivity. Herein, Cu vacancies are first constructed through electrochemical reduction of Cu-based nanowires, in which high-angle annular dark-field scanning transmission electron microscopy image manifests the formation of triple-copper-vacancy associates with different concentrations, confirmed by positron annihilation lifetime spectroscopy. In situ attenuated total reflection-surface enhanced infrared absorption spectroscopy discloses the triple-copper-vacancy associates favor *CO adsorption and fast *CO dimerization. Moreover, density-functional-theory calculations unravel the triple-copper-vacancy associates endow the nearby Cu sites with enriched and disparate local charge density, which enhances the *CO adsorption and reduces the CO-CO coupling barrier, affirmed by the decreased *CO dimerization energy barrier by 0.4 eV. As a result, the triple-copper-vacancy associates confined in Cu nanowires achieve a high Faradaic efficiency of over 80% for C2+ products in a wide current density range of 400-800 mA cm-2, outperforming most reported Cu-based electrocatalysts.
RESUMO
Identifying a suitable water-soluble sacrificial layer is crucial to fabricating large-scale freestanding oxide membranes, which offer attractive functionalities and integrations with advanced semiconductor technologies. Here, we introduce a water-soluble sacrificial layer, "super-tetragonal" Sr4Al2O7 (SAOT). The low-symmetric crystal structure enables a superior capability to sustain epitaxial strain, allowing for broad tunability in lattice constants. The resultant structural coherency and defect-free interface in perovskite ABO3/SAOT heterostructures effectively restrain crack formation during the water release of freestanding oxide membranes. For a variety of nonferroelectric oxide membranes, the crack-free areas can span up to a millimeter in scale. This compelling feature, combined with the inherent high water solubility, makes SAOT a versatile and feasible sacrificial layer for producing high-quality freestanding oxide membranes, thereby boosting their potential for innovative device applications.
RESUMO
The metal-support interactions (MSI) could greatly determine the electronic properties of single-atom catalysts, thus affecting the catalytic performance. However, the typical approach to regulating MSI usually suffers from interference of the variation of supports or sacrificing the stability of catalysts. Here, we effectively regulate the site-specific MSI of Ir single atoms anchored on Ni layered double hydroxide through an electrochemical deposition strategy. Cathodic deposition drives Ir atoms to locate at three-fold facial center cubic hollow sites with strong MSI, while anodic deposition drives Ir atoms to deposit onto oxygen vacancy sites with weak MSI. The mass activity and intrinsic activity of Ir single-atom catalysts with strong MSI towards oxygen evolution reaction are 19.5 and 5.2 times that with weak MSI, respectively. Mechanism study reveals that the strong MSI between Ir atoms and the support stimulates the activity of Ir sites by inducing the switch of active sites from Ni sites to Ir sites and optimizes the adsorption strength of intermediates, thereby enhancing the activity.
RESUMO
Rapid and effective control of non-compressible massive hemorrhage poses a great challenge in first-aid and clinical settings. Herein, a biopolymer-based powder is developed for the control of non-compressible hemorrhage. The powder is designed to facilitate rapid hemostasis by its excellent hydrophilicity, great specific surface area, and adaptability to the shape of wound, enabling it to rapidly absorb fluid from the wound. Specifically, the powder can undergo sequential cross-linking based on "click" chemistry and Schiff base reaction upon contact with the blood, leading to rapid self-gelling. It also exhibits robust tissue adhesion through covalent/non-covalent interactions with the tissues (adhesive strength: 89.57 ± 6.62 KPa, which is 3.75 times that of fibrin glue). Collectively, this material leverages the fortes of powder and hydrogel. Experiments with animal models for severe bleeding have shown that it can reduce the blood loss by 48.9%. Studies on the hemostatic mechanism also revealed that, apart from its physical sealing effect, the powder can enhance blood cell adhesion, capture fibrinogen, and synergistically induce the formation of fibrin networks. Taken together, this hemostatic powder has the advantages for convenient preparation, sprayable use, and reliable hemostatic effect, conferring it with a great potential for the control of non-compressible hemorrhage.
Assuntos
Coagulantes , Hemostáticos , Animais , Pós , Aderências Teciduais , Hemorragia , Hemostáticos/farmacologiaRESUMO
Electrochemical synthesis of valuable chemicals and feedstocks through carbon dioxide (CO2) reduction in acidic electrolytes can surmount the considerable CO2 loss in alkaline and neutral conditions. However, achieving high productivity, while operating steadily in acidic electrolytes, remains a big challenge owing to the severe competing hydrogen evolution reaction. Here, we show that vertically grown bismuth nanosheets on a gas-diffusion layer can create numerous cavities as electrolyte reservoirs, which confine in situ-generated hydroxide and potassium ions and limit inward proton diffusion, producing locally alkaline environments. Based on this design, we achieve formic acid Faradaic efficiency of 96.3% and partial current density of 471 mA cm-2 at pH 2. When operated in a slim continuous-flow electrolyzer, the system exhibits a full-cell formic acid energy efficiency of 40% and a single pass carbon efficiency of 79% and performs steadily over 50 h. We further demonstrate the production of pure formic acid aqueous solution with a concentration of 4.2 weight %.
RESUMO
Alepterolic acid is a diterpene occurring in the fern Aleuritopteris argentea with potential biological activity that warrants further structural modification. In the present work, sixteen alepterolic acid derivatives were synthesized and evaluated for their anticancer activities. Among them, N-[m-(trifluoromethoxy)phenyl] alepterolamide displayed comparable activity (IC50 =4.20±0.21â µM) in MCF-7 cells. Moreover, mechanistic investigations indicated this compound was significantly capable of diminishing cell proliferation and viability of MCF-7 cells. After treatment with N-[m-(trifluoromethoxy)phenyl] alepterolamide, a significant increase in cleaved caspase-9, cleaved caspase-3, cleaved poly (ADP-ribose) polymerase (PARP) and Bax/Bcl2 ratio were observed in MCF-7 cells, leading to caspase-dependent apoptotic pathways. Further studies showed this compound promoted cellular apoptosis and inhibited migration in MCF-7 cells via modulation of the Akt/p70S6K signaling pathway. All these results revealed the potential of N-[m-(trifluoromethoxy)phenyl] alepterolamide as an appealing therapeutic drug candidate for breast cancer.
RESUMO
Zn-Mn batteries with two-electron conversion reactions simultaneously on the cathode and anode harvest a high voltage plateau and high energy density. However, the zinc anode faces dendrite growth and parasitic side reactions while the Mn2+/MnO2 reaction on the cathode involves oxygen evolution and possesses poor reversibility. Herein, a novel nanomicellar electrolyte using methylurea (Mu) has been developed that can encapsulate ions in the nanodomain structure to guide the homogeneous deposition of Zn2+/Mn2+ in the form of controlled release under an external electric field. Consecutive hydrogen bonding network is broken and a favorable local hydrogen bonding system is established, thus inhibiting the water-splitting-derived side reactions. Concomitantly, the solid-electrolyte interface protective layer is in situ generated on the Zn anode, further circumventing the corrosion issue resulting from the penetration of water molecules. The reversibility of the Mn2+/MnO2 conversion reaction is also significantly enhanced by regulating interfacial wettability and improving nucleation kinetics. Accordingly, the modified electrolyte endows the symmetric Znâ¥Zn cell with extended cyclic stability of 800 h with suppressed dendrites growth at an areal capacity of 1 mAh cm-2. The assembled Zn-Mn electrolytic battery also demonstrates an exceptional capacity retention of nearly 100% after 800 cycles and a superior energy density of 800 Wh kg-1 at an areal capacity of 0.5 mAh cm-2.
RESUMO
BACKGROUND: The novel endonuclease Cas12b was engineered for targeted genome editing in mammalian cells and is a promising tool for certain applications because of its small size, high sequence specificity and ability to generate relatively large deletions. We previously reported inhibition of the human immunodeficiency virus (HIV) in cell culture infections upon attack of the integrated viral DNA genome by spCas9 and Cas12a. METHODS: We now tested the ability of the Cas12b endonuclease to suppress a spreading HIV infection in cell culture with anti-HIV gRNAs. Virus inhibition was tested in long-term HIV replication studies, which allowed us to test for viral escape and the potential for reaching a CURE of the infected T cells. FINDINGS: We demonstrate that Cas12b can achieve complete HIV inactivation with only a single gRNA, a result for which Cas9 required two gRNAs. When the Cas12b system is programmed with two antiviral gRNAs, the overall anti-HIV potency is improved and more grossly mutated HIV proviruses are generated as a result of multiple cut-repair actions. Such "hypermutated" HIV proviruses are more likely to be defective due to mutation of multiple essential parts of the HIV genome. We report that the mutational profiles of the Cas9, Cas12a and Cas12b endonucleases differ significantly, which may have an impact on the level of virus inactivation. These combined results make Cas12b the preferred editing system for HIV-inactivation. INTERPRETATION: These results provide in vitro "proof of concept' for CRISPR-Cas12b mediated HIV-1 inactivation.
Assuntos
Infecções por HIV , Provírus , Animais , Humanos , Provírus/genética , Provírus/metabolismo , Sistemas CRISPR-Cas/genética , Infecções por HIV/genética , Linfócitos T/metabolismo , DNA Viral/genética , Endonucleases/genética , Endonucleases/metabolismo , Técnicas de Cultura de Células , MamíferosRESUMO
Twenty-one previously undescribed compounds, including nineteen 3,4-seco-labdanes (nudiflopenes P-W, Y, AI-JI), one 3,4-seco-pimarane (nudiflopene X), and one labdane (nudiflopene Z), along with nine known compounds (one 3,4-seco-pimarane and eight 3,4-seco-labdanes) were isolated from the leaves of Callicarpa nudiflora Hook. Et Arn. The structures of these compounds were elucidated by high-resolution electrospray ionization mass spectrometry and one- and two-dimensional nuclear magnetic resonance spectroscopy. In addition, configurations of the isolated compounds were determined by electronic circular dichroism, DP4+ probability analysis, and single-crystal X-ray diffraction experiments. All undescribed compounds were evaluated for their cytotoxicity against HepG2 cells in vitro, among which compound 12 exhibited a moderate activity with an IC50 value of 27.8 µM.
Assuntos
Callicarpa , Diterpenos , Medicamentos de Ervas Chinesas , Humanos , Abietanos , Células Hep G2 , Callicarpa/química , Diterpenos/farmacologia , Diterpenos/química , Medicamentos de Ervas Chinesas/química , Estrutura MolecularRESUMO
This work demonstrated that bio-jet fuels can be directionally prepared from bagasse (a typical lignocellulose biomass) by integrating bio- and chemical catalysis reaction processes. This controllable transformation started with the preparation of acetone/butanol/ethanol (ABE) intermediates through the enzymolysis and fermentation of bagasse. Pretreatment of bagasse by deep eutectic solvent (DES) promoted the enzymatic hydrolysis and fermentation because it destroyed the structure of biomass and remove lignin in lignocellulose. Subsequently, the selective catalytic conversion of sugarcane derived ABE broth to jet range fuels was achieved through an integrated process: ABE dehydration to light olefins over the HSAPO-34 catalyst and olefin polymerization to bio-jet fuels over the Ni/HBET catalyst. The dual catalyst bed synthesis mode improved the selectively of bio-jet fuels. High selectivity of jet range fuels (83.0 %) and high conversion of ABE (95.3 %) were obtained by the integrated process.
Assuntos
Acetona , Alcenos , Fermentação , Acetona/química , Polimerização , Biomassa , Etanol/química , Butanóis , 1-ButanolRESUMO
Electrocatalytic carbon dioxide reduction (CO2R) in neutral electrolytes can mitigate the energy and carbon losses caused by carbonate formation but often experiences unsatisfied multicarbon selectivity and reaction rates because of the kinetic limitation to the critical carbon monoxide (CO)-CO coupling step. Here, we describe that a dual-phase copper-based catalyst with abundant Cu(I) sites at the amorphous-nanocrystalline interfaces, which is electrochemically robust in reducing environments, can enhance chloride-specific adsorption and consequently mediate local *CO coverage for improved CO-CO coupling kinetics. Using this catalyst design strategy, we demonstrate efficient multicarbon production from CO2R in a neutral potassium chloride electrolyte (pH â¼6.6) with a high Faradaic efficiency of 81% and a partial current density of 322 milliamperes per square centimeter. This catalyst is stable after 45 h of operation at current densities relevant to commercial CO2 electrolysis (300 mA per square centimeter).
RESUMO
Photodetectors have been applied to pivotal optoelectronic components of modern optical communication, sensing, and imaging systems. As a room-temperature ferroelectric van der Waals semiconductor, 2D α-In2Se3 is a promising candidate for a next-generation optoelectronic material because of its thickness-dependent direct bandgap and excellent optoelectronic performance. Previous studies of photodetectors based on α-In2Se3 have been rarely focused on the modulated relationship between the α-In2Se3 intrinsic ferroelectricity and photoresponsivity. Herein, a simple integrated process and high-performance photodetector based on an α-In2Se3/Si vertical hybrid-dimensional heterojunction was constructed. Our photodetector in the ferroelectric polarization up state accomplishes a self-powered, highly sensitive photoresponse with an on/off ratio of 4.5 × 105 and detectivity of 1.6 × 1013 Jones, and it also shows a fast response time with 43 µs. The depolarization field generated by the remanent polarization of ferroelectrics in α-In2Se3 provides a strategy for enhancement and modulation of photodetection. The negative correlation was discovered because the enhancement photoresponsivity factor of ferroelectric modulation competes with the photovoltaic behavior within the α-In2Se3/Si heterojunction. Our research highlights the great potential of the high-efficiency heterojunction photodetector for future object recognition and photoelectric imaging.