RESUMO
Hydroxyl groups on the surface of cellulose nanocrystals (CNC) are modified by chemical methods, CNC and the modified CNC are used as fillers to prepare PHB/cellulose nanocomposites. The absorption peak of carbonyl group of the modified CNC (CNC-CL and CNC-LA) appears in the FT-IR spectra, which proves that the modifications are successful. Thermal stability of CNC-CL and CNC-LA is better than that of pure CNC. Pure CNC is beneficial to the nucleation of PHB, while CNC-CL and CNC-LA inhibit the nucleation of PHB. The spherulite size of PHB and its nanocomposites increases linearly over time, and the maximum growth rate of PHB spherulite exists at 90 °C. Rheological analysis shows that viscous deformation plays the dominant role in PHB, PHBC and PHBC-CL samples, while the elastic deformation is dominant in PHBC-LA. According to the rheological data, the dispersion of CNC-CL and CNC-LA in PHB is better than that of CNC. This work demonstrates the impact of modified CNC on the crystallization and viscoelastic properties of PHB. Moreover, the interface enhancement effect of modified CNC on PHB/CNC nanomaterials is revealed from the crystallization and rheology perspectives.
Assuntos
Celulose , Cristalização , Hidroxibutiratos , Nanopartículas , Poliésteres , Reologia , Celulose/química , Nanopartículas/química , Hidroxibutiratos/química , Poliésteres/química , Propriedades de Superfície , Nanocompostos/química , Espectroscopia de Infravermelho com Transformada de Fourier , Viscosidade , Temperatura , Poli-HidroxibutiratosRESUMO
Passive daytime radiative cooling (PDRC) is an energy-saving technology without an additional energy supply or environmental pollution. At present, most PDRC coatings for buildings are only aiming at high solar reflectivity (RS) and high mid-infrared emissivity (EMIR) while ignoring practicalities such as adhesion strength, scalability, and durability. In this work, modified calcined kaolin/(ethylene trifluorochloroethylene copolymer-polydimethylsiloxane) (MK/(FEVE-PDMS)) coating with super practicability is prepared by using MK as a filler, FEVE as an adhesive, and PDMS as a hydrophobic modifier. The RS and EMIR of the coating are 92.5 and 94.6%, respectively. The MK/(FEVE-PDMS) coating exhibits superhydrophobicity, with an advancing contact angle (ACA) of 160.2° and a hysteresis contact angle of 7.3°. At an average solar irradiance of 742.78 W m-2, the coating achieved a temperature drop of 13.12 °C (shielded with PE film) and 3.09 °C (without shielding), respectively, relative to the environment. The coating adheres firmly to the substrate with an adhesion strength of class 2. The superhydrophobicity of the coating provides excellent durability and ease of repair, which can resist UV aging and mechanical damage. The durable superhydrophobicity gives the coating long-term stability in PDRC performance. Additionally, the cheap raw materials and the preparation process, consistent with the production of existing paints, show excellent scalability. Moreover, the energy consumption simulation results show that the energy saving ratio of the coating is more than 10% in the densely populated Yangtze River Delta and Pearl River Delta. The durable self-cleaning radiative coating developed in this work has potential application prospects in areas where the demand for cooling in summer is large and the demand for heating in winter is small.
RESUMO
Novel star-like molecules containing P, N and Si with dual functions of flame retardance and curing promotion (abridged as HCCP-KH540) were successfully synthesized through the nucleophilic substitution reaction of hexachlorocyclotriphosphazene (HCCP) and 3-aminopropyltrimethoxysilane (KH540). HCCP-KH540 was incorporated with the matrix of epoxy resin (EP) to form a flame retardant composite abridged as E-HK. The activation energy of the curing reaction of the E-HK composite was reduced but the curing reaction rate was accelerated by HCCP-KH540. The E-HK composite with 30 phr content of HCCP-KH540 exhibited excellent flame retardancy with limiting oxygen index of 29.6% and V-1 rating in the vertical burning test as well as excellent thermal stability with a char yield of 23.77% at 700 °C, compared with only 8.64% for pure EP.
RESUMO
A novel multiple-ring molecule containing P and N, called HCCP-SA, was successfully prepared by the nucleophilic substitution reaction of salicylamide (SA) and hexachlorocyclotriphosphazene (HCCP). Particularly, HCCP-SA possessed the dual functions of heat resistance and flame retardancy. The molecular structure of HCCP-SA was identified by Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy. HCCP-SA was bonded into the molecular chain of epoxy resin by the ring-opening curing reaction of epoxy resin, aiming to form a heat-resistant and flame-retardant composite (E-HS-x). In particular, the best-prepared E-HS-x composite with a 20 phr content of HCCP-SA (E-HS-20) presented excellent thermal stability, with an initial decomposition temperature of 267.94 °C and a max weight loss speed of only 0.95 mg·min-1. Moreover, E-HS-20 exhibited remarkable flame retardancy with a limiting oxygen index value of 27.1% and a V-2 rating in the UL94 flame retardancy test. The best-prepared E-HS-20 composite would be a suitable and potential candidate for heat-resistant and flame-retardant polymer materials.
RESUMO
Ultrahigh molecular weight polyethylene (UHMWPE) materials have been prevalent joint replacement materials for more than 45 years because of their excellent biocompatibility and wear resistance. In this study, functionalized activated nanocarbon (FANC) was prepared by grafting maleic anhydride polyethylene onto acid-treated activated nanocarbon. A novel porous UHMWPE composite was prepared by incorporating the appropriate amount of FANC and pore-forming agents during the hot-pressing process for medical UHMWPE powder. The experimental results showed that the best prepared porous UHMWPE/FANC exhibited appropriate tensile strength, porosity, and excellent hydrophilicity, with a contact angle of 65.9°. In vitro experiments showed that the porous UHMWPE/FANC had excellent biocompatibility, which is due to its porous structure and hydrophilicity caused by FANC. This study demonstrates the potential viability for our porous UHMWPE/FANC to be used as cartilage replacement material for biomedical applications.