Frequency of breaks, amount of muscular rest, and sustained muscle activity related to neck pain in a pooled dataset.

BACKGROUND: Neck pain remains a persistent challenge in modern society and is frequently encountered across a wide range of occupations, particularly those involving repetitive and monotonous tasks. It might be expected that patterns of trapezius muscle activity at work, characterized by few breaks and prolonged periods of sustained muscle activity, are linked to neck pain. However, previous cross-sectional studies have generally failed to establish a definitive association. While some longitudinal studies have suggested that extended periods of heightened muscle activity could be a risk factor for neck pain, these findings often relied on limited participant numbers or specific professional groups. This study aimed to investigate the relationship between trapezius muscle activity and neck pain by pooling data from seven Scandinavian research institutes encompassing a diverse range of occupational backgrounds. METHODS: Electromyographic (EMG) data for the upper trapezius muscle, collected during working hours, were coupled with questionnaire responses pertaining to neck pain, individual characteristics, and potential confounding variables for a total of 731 subjects. Additionally, longitudinal data from 258 subjects were available. The various EMG datasets were consolidated into a standardized format, and efforts were made to harmonize inquiries about neck pain. Regression analyses, adjusting for sex and height, were conducted to explore the associations between muscle activity variables and neck pain. An exposure index was devised to quantify the cumulative neck load experienced during working hours and to differentiate between various occupational categories. RESULTS: The cross-sectional data displayed a distinct pattern characterized by positive associations for brief periods of sustained muscle activity (SUMA) and negative associations for prolonged SUMA-periods and neck pain. The longitudinal data exhibited a contrasting trend, although it was not as pronounced as the cross-sectional findings. When employing the exposure index, notable differences in cumulative muscle load emerged among occupational groups, and positive associations with longitudinal neck pain were identified. DISCUSSION: The results suggest that individuals with neck pain experience higher cumulative workloads and extended periods of muscle activity over the long term. In the short term, they appear to compensate by taking frequent short breaks, resulting in a lower cumulative workload. Regardless of their occupation, it is crucial to distribute work breaks throughout the workday to ensure that the cumulative load remains manageable.

Characteristics of real-world ship energy consumption and emissions based on onboard testing.

The Yangtze River ships are generally overpowered and less energy efficient. In this study, a Yangtze ship was selected as the test ship, and its characteristics were investigated through energy consumption and emission testing under multiple operating conditions. The results show that the ship operates at 25-50 % engine load for 72.2 % of the time, and at this partial load, 9.72 % more CO2 and 9.81 % more NOX can be emitted than at the rated power. The concentrations of exhaust vary under different operating conditions. The emission factor of CO was the highest under departure conditions; CO2 and SO2 were the highest under anchoring conditions; and NOx was the highest under cruising conditions. The accuracy of the emission factors obtained by the direct calculation method was improved by 30 % compared to the concentration estimation method. This study can help understand the real level of energy consumption and emissions from in-service ships.

Reliability and Validity of Six Selected Observational Methods for Risk Assessment of Hand Intensive and Repetitive Work.

Risk assessments of hand-intensive and repetitive work are commonly done using observational methods, and it is important that the methods are reliable and valid. However, comparisons of the reliability and validity of methods are hampered by differences in studies, e.g., regarding the background and competence of the observers, the complexity of the observed work tasks and the statistical methodology. The purpose of the present study was to evaluate six risk assessment methods, concerning inter- and intra-observer reliability and concurrent validity, using the same methodological design and statistical parameters in the analyses. Twelve experienced ergonomists were recruited to perform risk assessments of ten video-recorded work tasks twice, and consensus assessments for the concurrent validity were carried out by three experts. All methods' total-risk linearly weighted kappa values for inter-observer reliability (when all tasks were set to the same duration) were lower than 0.5 (0.15-0.45). Moreover, the concurrent validity values were in the same range with regards to total-risk linearly weighted kappa (0.31-0.54). Although these levels are often considered as being fair to substantial, they denote agreements lower than 50% when the expected agreement by chance has been compensated for. Hence, the risk of misclassification is substantial. The intra-observer reliability was only somewhat higher (0.16-0.58). Regarding the methods ART (Assessment of repetitive tasks of the upper limbs) and HARM (Hand Arm Risk Assessment Method), it is worth noting that the work task duration has a high impact in the risk level calculation, which needs to be taken into account in studies of reliability. This study indicates that when experienced ergonomists use systematic methods, the reliability is low. As seen in other studies, especially assessments of hand/wrist postures were difficult to rate. In light of these results, complementing observational risk assessments with technical methods should be considered, especially when evaluating the effects of ergonomic interventions.

Evaluation of In-Cloth versus On-Skin Sensors for Measuring Trunk and Upper Arm Postures and Movements.

Smart workwear systems with embedded inertial measurement unit sensors are developed for convenient ergonomic risk assessment of occupational activities. However, its measurement accuracy can be affected by potential cloth artifacts, which have not been previously assessed. Therefore, it is crucial to evaluate the accuracy of sensors placed in the workwear systems for research and practice purposes. This study aimed to compare in-cloth and on-skin sensors for assessing upper arms and trunk postures and movements, with the on-skin sensors as the reference. Five simulated work tasks were performed by twelve subjects (seven women and five men). Results showed that the mean (±SD) absolute cloth-skin sensor differences of the median dominant arm elevation angle ranged between 1.2° (±1.4) and 4.1° (±3.5). For the median trunk flexion angle, the mean absolute cloth-skin sensor differences ranged between 2.7° (±1.7) and 3.7° (±3.9). Larger errors were observed for the 90th and 95th percentiles of inclination angles and inclination velocities. The performance depended on the tasks and was affected by individual factors, such as the fit of the clothes. Potential error compensation algorithms need to be investigated in future work. In conclusion, in-cloth sensors showed acceptable accuracy for measuring upper arm and trunk postures and movements on a group level. Considering the balance of accuracy, comfort, and usability, such a system can potentially be a practical tool for ergonomic assessment for researchers and practitioners.

Ergonomics and performance of using prismatic loupes in simulated surgical tasks among surgeons - a randomized controlled, cross-over trial.

Introduction: Recently developed prismatic loupes may mitigate the high physical workload and risk of neck disorders associated with traditional surgical loupes among surgeons. However, research in this area, particularly among surgeons, is sparse. This study examines the impact of prismatic loupes on surgeons' physical workload, musculoskeletal discomfort, and performance during simulated surgical tasks. Materials and methods: Nineteen out of twenty recruited surgeons performed three tasks in a fixed-order with their own loupes and both low-tilt (LT) and high-tilt (HT) prismatic loupes, in a randomized order. The primary outcomes were the median inclination angles and velocities of the head, trunk, and upper arms, along with the median muscle activity of the cervical erector spinae (CES), upper trapezius (UT), and lumbar erector spinae (LES) for each pair of loupes. The secondary outcomes included performance (completion time and errors), perceived body-part discomfort, and subjective evaluation of the three pairs of loupes. Results: Using prismatic loupes, either LT or HT, compared with the surgeons' own loupes yielded lower head inclinations (all p < 0.001), lower neck muscle activity (all p < 0.05), and lower neck discomfort in indirect comparisons (p < 0.01) with no significant difference in surgical errors (p = 0.628). However, HT loupes resulted in a longer task completion time in two tasks (p < 0.001). Most surgeons preferred LT loupes (N = 12) for their comfort and visual functions. Discussion: The results indicate that prismatic loupes can reduce physical workload in the neck during simulated surgical task, with no significant difference in surgical errors. Future studies are needed to investigate the long-term effects of prismatic loupes among surgeons.

Mind the gap - development of conversion models between accelerometer- and IMU-based measurements of arm and trunk postures and movements in warehouse work.

Sensor type (accelerometers only versus inertial measurement units, IMUs) and angular velocity computational method (inclination versus generalized velocity) have been shown to affect the measurements of arm and trunk movements. This study developed models for conversions between accelerometer and IMU measurements of arm and trunk inclination and between accelerometer and IMU measurements of inclination and generalized (arm) velocities. Full-workday recordings from accelerometers and IMUs of arm and trunk postures and movements from 38 warehouse workers were used to develop 4 angular (posture) and 24 angular velocity (movement) conversion models for the distributions of the data. A power function with one coefficient and one exponent was used, and it correlated well (r2 > 0.999) in all cases to the average curves comparing one measurement with another. These conversion models facilitate the comparison and merging of measurements of arm and trunk movements collected using the two sensor types and the two computational methods.

Surgeons' physical workload in open surgery versus robot-assisted surgery and nonsurgical tasks.

BACKGROUND: Musculoskeletal disorders (MSDs) are common among surgeons, and its prevalence varies among surgical modalities. There are conflicting results concerning the correlation between adverse work exposures and MSD prevalence in different surgical modalities. The progress of rationalization in health care may lead to job intensification for surgeons, but the literature is scarce regarding to what extent such intensification influences the physical workload in surgery. The objectives of this study were to quantify the physical workload in open surgery and compare it to that in (1) nonsurgical tasks and (2) two surgeon roles in robot-assisted surgery (RAS). METHODS: The physical workload of 22 surgeons (12 performing open surgery and 10 RAS) was measured during surgical workdays, which includes trapezius muscle activity from electromyography, and posture and movement of the head, upper arms and trunk from inertial measurement units. The physical workload of surgeons in open surgery was compared to that in nonsurgical tasks, and to the chief and assistant surgeons in RAS, and to the corresponding proposed action levels. Mixed-effects models were used to analyze the differences. RESULTS: Open surgery constituted more than half of a surgical workday. It was associated with more awkward postures of the head and trunk than nonsurgical tasks. It was also associated with higher trapezius muscle activity levels, less muscle rest time and a higher proportion of sustained low muscle activity than nonsurgical tasks and the two roles in RAS. The head inclination and trapezius activity in open surgery exceeded the proposed action levels. CONCLUSIONS: The physical workload of surgeons in open surgery, which exceeded the proposed action levels, was higher than that in RAS and that in nonsurgical tasks. Demands of increased operation time may result in higher physical workload for open surgeons, which poses an increased risk of MSDs. Risk-reducing measures are, therefore, needed.

Study on Group Differences in Migrant Workers' Urban Integration in China.

Objective: This manuscript evaluates and tests the group differences in migrant workers' urban integration from the perspectives of individual characteristics and migration characteristics, so as to provide theoretical support and practical guidance for the government to issue more effective assistance policies. Methods: Multilevel comprehensive evaluation method and Entropy method are used to calculate the urban integration level of migrant workers, and one-way ANOVA and optimal scaling regression are used to test the group differences in migrant workers' urban integration. Results: Based on the questionnaire data of 854 migrant workers in China, the scale of migrant workers' urban integration has good reliability and validity. The overall level of migrant workers' urban integration is 49.61% and there exist group differences in migrant workers' urban integration. The impact of education level, income level, and migration time on migrant workers' urban integration is significantly positive, whereas the impact of migration distance on migrant workers' urban integration is significantly negative. The urban integration level of migrant workers who have family members accompanying them is higher than that of migrant workers who have no family members accompanying them. Gender, age, and marriage have no significant impact on migrant workers' urban integration. Strengths and Limitations of This Study: This study aims to measure and test the group differences in migrant workers' urban integration using ANOVA and optimal scaling regression. However, the shortcomings of this study are the selection of the "migrant workers' urban integration" scale and the representativeness of the sample used in this study. Conclusion: There are group differences in migrant workers' urban integration with different education levels, income levels, migration distances, migration times, and statuses of family members accompanying. In the policy of promoting migrant workers' urban integration, we should accurately count the characteristics of migrant workers and give more attention to migrant workers with low education levels, low-income levels, long migration distances, short migration times, and no family accompany.

Analysis of work willingness and its influencing factors of mental illness prevention and control personnel of grassroots institutions in China: a cross-sectional study.

BACKGROUND: In China, there are many studies focusing on the willingness of general practitioners and special medical personnel to work. However, there is a lack of studies on the working willingness of mental illness prevention and control staff. METHODS: This is a cross-sectional study. In this study we selected mental illness prevention and control personnel in the grassroots health service institutions in Hunan Province, China as our subjects. The χ2 test and binary logistic regression analysis were used to explore their work willingness and related influencing factors. RESULTS: The work willingness of mental illness prevention and control staff of grassroots institutions in China was 55.6% (502/903). The influencing factors were age (odds ratio [OR] 0.753 [95% confidence interval {CI} 0.638 to 0.888]), educational background (OR 1.342 [95% CI 1.092 to 1.648]) and major (OR 1.083 [95% CI 1.009 to 1.162]). CONCLUSIONS: The work willingness of the mental illness prevention and control staff of grassroots institutions in China was at a low level. The job of preventing and controlling mental illness in grassroots areas needs the competence of workers with strong specialty and professional competence and workers who are willing to work in these communities. Work willingness is the result of multiple factors, especially healthcare investments.

A possible revival of population-representing digital human manikins in static work situations - exemplified through an evaluation of a prototype console for robotic surgery.

BACKGROUND: In the 90s, digital human manikins (DHMs) were introduced in planning of workstations, by static or semi-static simulations. Modern DHMs can simulate dynamic work and offer a rapid way for a virtual pre-production ergonomic evaluation. Work-related musculoskeletal disorders may affect surgical performance and patient safety. A prototype of an open console, which is contrary to the conventional closed consoles and may be seen as a representative for a new generation, has been designed to reduce workload for robotic surgery surgeons. OBJECTIVE: The aim of this project was to test a new DHM tool with improved usability to evaluate the ergonomics of a console of a robotic surgical system in a pre-production stage. METHODS: The DHM tool IMMA was used together with a 3D model of the prototype console. Twelve manikins who represented females and males from two national populations were introduced. Manikin-console distances, after console adjustments per manikin, were compared with a US checklist and Swedish standard for VDU work. RESULTS: The DHM tool was useful for this case, but the distances of the checklist and the standard were needed to be obtained "manually". The automatic functions of the DHM worked smoothly but were not optimized for VDU work. The prototype fulfilled most, but not all, of the ergonomic criteria of the checklist and the standard. CONCLUSIONS: There is room for improvements of the adjustable ranges of the console prototype. DHMs may facilitate rapid pre-production evaluation of workstations for static work; if ergonomic assessment models for VDU work are built-in, there may be a revival of DHMs in static work situations.

Effects of Sensor Types and Angular Velocity Computational Methods in Field Measurements of Occupational Upper Arm and Trunk Postures and Movements.

Accelerometer-based inclinometers have dominated kinematic measurements in previous field studies, while the use of inertial measurement units that additionally include gyroscopes is rapidly increasing. Recent laboratory studies suggest that these two sensor types and the two commonly used angular velocity computational methods may produce substantially different results. The aim of this study was, therefore, to evaluate the effects of sensor types and angular velocity computational methods on the measures of work postures and movements in a real occupational setting. Half-workday recordings of arm and trunk postures, and movements from 38 warehouse workers were compared using two sensor types: accelerometers versus accelerometers with gyroscopes-and using two angular velocity computational methods, i.e., inclination velocity versus generalized velocity. The results showed an overall small difference (<2° and value independent) for posture percentiles between the two sensor types, but substantial differences in movement percentiles both between the sensor types and between the angular computational methods. For example, the group mean of the 50th percentiles were for accelerometers: 71°/s (generalized velocity) and 33°/s (inclination velocity)-and for accelerometers with gyroscopes: 31°/s (generalized velocity) and 16°/s (inclination velocity). The significant effects of sensor types and angular computational methods on angular velocity measures in field work are important in inter-study comparisons and in comparisons to recommended threshold limit values.

MiR-199a-3p enhances breast cancer cell sensitivity to cisplatin by downregulating TFAM (TFAM).

Chemotherapy resistance is the major obstacle to the effective therapy of cancer. While the mechanism of chemotherapy resistance is still not fully understood. Increasing evidences demonstrated that microRNAs (miRNAs) may have a crucial function in chemotherapy resistance through modulating intracellular pathways. MiR-199a has been shown to be involved in multiple malignancy-related processes, although the precise mechanism is unclear at present. In this study, we found that the expression level of miR-199a-3p was lower in cisplatin (DDP) resistant breast cancer MDA-MB-231/DDP cells compared with parental DDP-sensitive cells. Inhibition of miR-199a-3p in MDA-MB-231 cells significantly attenuated DDP-induced apoptosis and anti-proliferative effects, while overexpression of miR-199a-3p in MDA-MB-231/DDP cells increased the sensitivity to DDP. Moreover, expression levels of mitochondrial transcription factor A (TFAM) were modulated by miR-199a-3p. The luciferase reporter assay indicated that TFAM may be the target gene of miR-199a. Knocking down of TFAM could partially reverse DDP resistance in MDA-MB-231 cells induced by miR-199a-3p inhibition, while TFAM overexpression could partially restore miR-199a-3p-induced chemo-sensitivity of MDA-MB-231/DDP cells to DDP. These results show that miR-199a-3p is able to attenuate cisplatin resistance in breast cancer cells through inhibiting TFAM expression.