Experimental data simulating lithium battery charging and discharging tests under different external constraint pressure conditions.

In this paper, the GSP655060Fe soft pack lithium-ion battery with a capacity of 1600 mAh is utilized, employing lithium iron phosphate as the positive electrode and graphite as the negative electrode. In order to comprehensively evaluate the performance of lithium batteries under the conditions of multi-application scenarios, the operating conditions of the battery were simulated under various external confinement pressures of 300 N, 400 N, 500 N, and 600 N, respectively, and the ambient temperatures of 10 ℃, 25 ℃, and 40 ℃, respectively, were controlled to thoroughly test the battery. One charge/discharge test was conducted on six batteries of the same model at multiplicities of 0.5 C, 1 C, 1.5 C, and 2 C, respectively. To ensure the accuracy and reliability of the experimental data, a Battery comprehensive tester Neware BTS-5V12A was utilized, which possesses high-precision voltage and current measurement capabilities with an error rate of only 0.05 %. This data plays an important role in battery research and development, new energy vehicles, electronic products, and other fields.

In Situ Induced Interface Engineering in Hierarchical Fe3O4 Enhances Performance for Alkaline Solid-State Energy Storage.

Rechargeable aqueous batteries adopting Fe-based materials are attracting widespread attention by virtue of high-safety and low-cost. However, the present Fe-based anodes suffer from low electronic/ionic conductivity and unsatisfactory comprehensive performance, which greatly restrict their practicability. Concerning the principle of physical chemistry, fabricating electrodes that could simultaneously achieve ideal thermodynamics and fast kinetics is a promising issue. Herein, hierarchical Fe3O4@Fe foam electrode with enhanced interface/grain boundary engineering is fabricated through an in situ self-regulated strategy. The electrode achieves ultrahigh areal capacity of 31.45 mA h cm-2 (50 mA cm-2), good scale application potential (742.54 mA h for 25 cm2 electrode), satisfied antifluctuation capability, and excellent cycling stability. In/ex situ characterizations further validate the desired thermodynamic and kinetic properties of the electrode endowed with accurate interface regulation, which accounts for salient electrochemical reversibility in a two-stage phase transition and slight energy loss. This work offers a suitable strategy in designing high-performance Fe-based electrodes with comprehensive inherent characteristics for high-safety large-scale energy storage.

YOLO-Granada: a lightweight attentioned Yolo for pomegranates fruit detection.

Pomegranate is an important fruit crop that is usually managed manually through experience. Intelligent management systems for pomegranate orchards can improve yields and address labor shortages. Fast and accurate detection of pomegranates is one of the key technologies of this management system, crucial for yield and scientific management. Currently, most solutions use deep learning to achieve pomegranate detection, but deep learning is not effective in detecting small targets and large parameters, and the computation speed is slow; therefore, there is room for improving the pomegranate detection task. Based on the improved You Only Look Once version 5 (YOLOv5) algorithm, a lightweight pomegranate growth period detection algorithm YOLO-Granada is proposed. A lightweight ShuffleNetv2 network is used as the backbone to extract pomegranate features. Using grouped convolution reduces the computational effort of ordinary convolution, and using channel shuffle increases the interaction between different channels. In addition, the attention mechanism can help the neural network suppress less significant features in the channels or space, and the Convolutional Block Attention Module attention mechanism can improve the effect of attention and optimize the object detection accuracy by using the contribution factor of weights. The average accuracy of the improved network reaches 0.922. It is only less than 1% lower than the original YOLOv5s model (0.929) but brings a speed increase and a compression of the model size. and the detection speed is 17.3% faster than the original network. The parameters, floating-point operations, and model size of this network are compressed to 54.7%, 51.3%, and 56.3% of the original network, respectively. In addition, the algorithm detects 8.66 images per second, achieving real-time results. In this study, the Nihui convolutional neural network framework was further utilized to develop an Android-based application for real-time pomegranate detection. The method provides a more accurate and lightweight solution for intelligent management devices in pomegranate orchards, which can provide a reference for the design of neural networks in agricultural applications.

A unique three-dimensional network double-core-shell structure S@MnO2@MXene suppresses the shuttle effect in high-sulfur-content high-performance lithium-sulfur batteries.

Lithium-sulfur (Li-S) batteries represent the most promising next-generation energy storage systems because of their high theoretical specific capacity and energy density. However, the severe shuttle effect and volume expansion of sulfur cathodes have impeded their commercial viability. Hence, accelerating the conversion of lithium polysulfides (LiPSs) is crucial for achieving efficient Li-S batteries. In this study, we employ a straightforward electrostatic self-assembly method to coat ultra-thin MXene nanosheets onto a S@MnO2 core-shell structure, resulting in a highly conductive three-dimensional network. This unique structure not only suppresses the diffusion of LiPSs but also accelerates electron and ion transfer, ensuring a rapid and efficient conversion of LiPSs. The CV curves of symmetrical cells and the Li2S deposition curves demonstrate a significant improvement in the catalytic performance of batteries with S@MnO2@MXene. The capacity of Li-S batteries achieved an impressive 842 mAh/g at the current density of 1C, with a minimal capacity decay of only 0.84 mAh/g per cycle within 500 cycles. Additionally, increasing the sulfur loading mass to 5.88 mg cm-2 resulted in an areal capacity of 6.33 mAh cm-2, demonstrating practical application potential.

High-capacity K+-pillared layered manganese dioxide as cathode material for high-rate aqueous zinc-ion battery.

Sluggish kinetics and severe structural instability of manganese-based cathode materials for rechargeable aqueous zinc-ion batteries (ZIBs) lead to low-rate capacity and poor cyclability, which hinder their practical applications. Pillaring manganese dioxide (MnO2) by pre-intercalation is an effective strategy to solve the above problems. However, increasing the pre-intercalation content to realize stable cycling of high capacity at large current densities is still challenging. Here, high-rate aqueous Zn2+ storage is realized by a high-capacity K+-pillared multi-nanochannel MnO2 cathode with 1 K per 4 Mn (δ-K0.25MnO2). The high content of the K+ pillar, in conjunction with the three-dimensional confinement effect and size effect, promotes the stability and electron transport of multi-nanochannel layered MnO2 in the ion insertion/removal process during cycling, accelerating and accommodating more Zn2+ diffusion. Multi-perspective in/ex-situ characterizations conclude that the energy storage mechanism is the Zn2+/H+ ions co-intercalating and phase transformation process. More specifically, the δ-K0.25MnO2 nanospheres cathode delivers an ultrahigh reversible capacity of 297 mAh g-1 at 1 A g-1 for 500 cycles, showing over 96 % utilization of the theoretical capacity of δ-MnO2. Even at 3 A g-1, it also delivered a 63 % utilization and 64 % capacity retention after 1000 cycles. This study introduces a highly efficient cathode material based on manganese oxide and a comprehensive analysis of its structural dynamics. These findings have the potential to improve energy storage capabilities in ZIBs significantly.

Recurrent PRDM10 Fusions in Superficial CD34-Positive Fibroblastic Tumors : A Clinicopathologic and Molecular Study of 10 Additional Cases of an Emerging Novel Entity.

OBJECTIVES: Superficial CD34-positive fibroblastic tumor (SCD34FT) is a rare mesenchymal neoplasm. The genetic alterations of SCD34FT have yet to be determined. Recent studies suggest it overlaps with PRDM10-rearranged soft tissue tumor (PRDM10-STT). METHODS: This study aimed to characterize a series of 10 cases of SCD34FT using fluorescence in situ hybridization (FISH) and targeted next-generation sequencing (NGS). RESULTS: The study recruited 7 men and 3 women aged between 26 and 64 years. The tumors were located in the superficial soft tissues of the thigh (8 cases), foot, and back (1 case each), ranging in size from 1.5 to 7 cm. The tumors were composed of sheets and fascicles of plump spindled to polygonal cells, with glassy cytoplasm and pleomorphic nuclei. Mitotic activity was absent or low. Common and uncommon stromal findings included foamy histiocytic infiltrates, myxoid changes, peripheral lymphoid aggregates, large ectatic vessels, arborizing capillary vasculature, and hemosiderin deposition. All tumors expressed CD34, and 4 demonstrated focal cytokeratin immunoexpression. In 7 of 9 (77.8%) cases analyzed, FISH identified PRDM10 rearrangement. Targeted NGS revealed a MED12::PRDM10 fusion in 4 of 7 cases tested. Follow-up showed no recurrence or metastasis. CONCLUSIONS: We demonstrate recurrent PRDM10 rearrangements in SCD34FT and provide additional evidence of a close relationship to PRDM10-STT.

Metanephric stromal tumor with BRAF V600E mutation in an adult patient: Case report and literature review.

Metanephric stromal tumor (MST) is a rare, benign pediatric renal neoplasm of uncertain histogenesis that belongs to the metanephric family of tumors. MST involving adult patients is very uncommon, which could cause significant diagnostic confusions. Recent molecular studies have revealed recurrent BRAF mutations in MST in pediatric patients which may serve as powerful diagnostic tools for distinguishing MST from other renal stromal tumors. We present a BRAF-mutated MST in an adult patient with a brief review of the pertinent literature. To our knowledge, our case represents to date the sixth report of adult MST and the first adult MST proven to harbor BRAF mutation. This is a 41-year-old man who was incidentally identified to have a left renal mass by ultrasonography. He had a 5-year history of hypertension which could be controlled with oral antihypertensive drug. Partial nephrectomy was performed which demonstrated a 2.6-cm, oval, circumscribed mass with a fibrotic and firm texture. Microscopic examination showed a hypocellular, spindle cell neoplasm with entrapped nephrons, within a predominantly fibrous and focally myxoid stroma. Foci of hyalinized stroma surrounding entrapped native renal tubules or blood vessels to form concentric collarettes-like structures, and small-sized arterioles showing angiodysplasia, were observed. Immunostains showed the tumor cells to be diffusely positive for CD34. Fluorescence in-situ hybridization analysis was negative for rearrangements involving both the EWSR1 and FUS loci. Targeted next-generation sequencing disclosed a pathogenic mutation of BRAF exon15: c.1799T>A (p.V600E). The patient's hypertension normalized without oral antihypertensive drugs 2 months postoperatively and he was in good status 12 months after the surgery. Our case highlights the diagnostic dilemma of MST occurring in adults and points to the usefulness of molecular detection of BRAF mutation for arriving at accurate diagnosis.

Spectroscopic Monitoring of the Electrode Process of MnO2@rGO Nanospheres and Its Application in High-Performance Flexible Micro-Supercapacitors.

Structural instability is a major obstacle to realizing the high performance of a MnO2-based pseudocapacitor material. Understanding its structure transformation in the process of electrochemical reaction, therefore, plays an important role in the efficient enhancement of rate capacity and stability. Herein, a stable MnO2@rGO core-shell nanosphere is first synthesized by a liquid-liquid interface deposition further combined with the electrostatic self-assembly method. The structural transformation process of the MnO2@rGO electrode is monitored by ex situ Raman and X-ray diffraction spectroscopy during the charging-discharging process. It is found in the first discharging process that layered-MnO2 transforms into the spinel-Mn3O4 phase with K+ ion intercalation. From the second charging, the spinel-Mn3O4 phase is gradually adjusted to a more stable λ-MnO2 with a three-dimensional tunnel structure, finally realizing the reversible intercalation/deintercalation of K+ ions in the λ-MnO2 tunnel structure during subsequent cycling, which can be attributed to the presence of oxygen vacancies formed by the lengthening of the Mn-O bond and losing oxygen in the MnO6 octahedral unit with K+ ion intercalation/deintercalation. Meanwhile, the MnO2@rGO electrode demonstrates a high specific capacitance of 378 F g-1 at 1 A g-1 and excellent cycling stability with a capacitance retention of up to 89.5% after 10 000 cycles at 10 A g-1. Furthermore, the assembled symmetric micro-supercapacitor delivers a high areal energy density of 1.01 µWh cm-2, superior cycling stability with no significant capacity decay after 8700 cycles, and a capacity retention rate of almost 100% after 2000 bending cycles, showing great mechanical flexibility and practicability.

Angiofibroma of Soft Tissue: A Clinicopathological Study of Eight Cases With Emphasis on the Diagnostic Utility of Fluorescence In Situ Hybridization Detection for NCOA2 Rearrangement.

Background: Angiofibroma of soft tissue (AFST) is a rare mesenchymal neoplasm of fibroblastic differentiation. Due to its diverse morphology and the lack of specific immunohistochemistry (IHC) markers, AFST could elicit a broad range of differential diagnosis. Several studies have disclosed in AFST recurrent gene fusions involving NCOA2, mainly AHRR-NCOA2 fusion, providing a useful approach to diagnosing this lesion. We report eight additional cases of this rare entity with emphasis on the diagnostic utility of fluorescence in situ hybridization (FISH) detection for NCOA2 rearrangement. Methods: Clinicopathological data for eight AFSTs were retrieved. IHC was performed, and FISH was used to detect rearrangements involving NCOA2, DDIT3, and FUS loci. Results: There were five female and three male patients, ranging in age from 29 to 69 years (median: 55 years). The patients presented mostly with a slow-growing mass in the extremities, with or without intermittent pain. All tumors were located in the lower extremities with three (27.5%) involving or adjacent to the knee joints. Tumor size ranged from 1.5 to 3.8 cm (median: 3.0 cm). Morphologically, the tumors consisted of a proliferation of uniform, bland spindle cells set in alternating myxoid and collagenous stroma with a prominent vascular network composed of countless small, branching, thin-walled blood vessels. Foci of "chicken wire"-like capillaries and medium- to large-sized blood vessels with prominent staghorn morphology were evident in two and four cases, respectively. In addition, sheets of small round cells and foci of cystic changes were observed in one each case. Degenerative nuclear atypia was identified in three cases, while mitosis and tumor necrosis were absent. By IHC, the stromal cells were variably positive for epithelial membrane antigen, desmin, and CD68. By FISH analysis, seven out of eight cases (87.5%) showed NCOA2 rearrangement, and the remaining one had increased gene copy numbers of intact NCOA2; rearrangements involving FUS (0/4) and DDIT3 (0/3) were not identified in the cases analyzed. All tumors were surgically removed, and none had recurrence at follow-up from 5 to 73 months. Conclusions: FISH analysis for NCOA2 rearrangement represents a practical method for confirming the diagnosis of AFST on the basis of appropriate histomorphological backgrounds.

Nomogram Based on CT Radiomics Features Combined With Clinical Factors to Predict Ki-67 Expression in Hepatocellular Carcinoma.

Objectives: The study developed and validated a radiomics nomogram based on a combination of computed tomography (CT) radiomics signature and clinical factors and explored the ability of radiomics for individualized prediction of Ki-67 expression in hepatocellular carcinoma (HCC). Methods: First-order, second-order, and high-order radiomics features were extracted from preoperative enhanced CT images of 172 HCC patients, and the radiomics features with predictive value for high Ki-67 expression were extracted to construct the radiomic signature prediction model. Based on the training group, the radiomics nomogram was constructed based on a combination of radiomic signature and clinical factors that showed an independent association with Ki-67 expression. The area under the receiver operating characteristic curve (AUC), calibration curve, and decision curve analysis (DCA) were used to verify the performance of the nomogram. Results: Sixteen higher-order radiomic features that were associated with Ki-67 expression were used to construct the radiomics signature (AUC: training group, 0.854; validation group, 0.744). In multivariate logistic regression, alfa-fetoprotein (AFP) and Edmondson grades were identified as independent predictors of Ki-67 expression. Thus, the radiomics signature was combined with AFP and Edmondson grades to construct the radiomics nomogram (AUC: training group, 0.884; validation group, 0.819). The calibration curve and DCA showed good clinical application of the nomogram. Conclusion: The radiomics nomogram developed in this study based on the high-order features of CT images can accurately predict high Ki-67 expression and provide individualized guidance for the treatment and clinical monitoring of HCC patients.

Repeated Herbal Acupoint Sticking Relieved the Recurrence of Allergic Asthma by Regulating the Th1/Th2 Cell Balance in the Peripheral Blood.

Allergic asthma is an inflammatory disease involving the Th1/Th2 cell imbalance in the peripheral blood. Repeated herbal acupoint sticking (RHAS) has been used for hundreds of years in China to relieve the recurrence of allergic asthma, and it is still practiced today. Thus, we explored the effect on allergic asthma relapse and the underlying immunoregulatory mechanism in this study. Here, we enrolled 50 allergic asthma participants, and 38 of them completed the treatment and follow-up (the allergic asthma group). In addition, 13 healthy participants (the control group) were enrolled. The recurrence number of allergic asthma participants and asthma control test (ACT) were used to evaluate the effect of treatment on relieving allergic asthma recurrence. Flow cytometry was performed to analyze the levels of Th1 and Th2 cells in the peripheral blood. The serum levels of IgE, IFN-γ, and IL-4 were detected by ELISA. (1) In the allergic asthma group, compared to before the first treatment, the recurrence number of allergic asthma participants decreased and the ACT score increased at end of the last treatment, 18 and 30 weeks of the trial (P < 0.05). At 18 and 30 weeks of the trial, the recurrence number of allergic asthma participants was less and the ACT score was higher than the ones from the same period last year in the allergic asthma group (P < 0.05). Compared to before the first treatment, the percentage of Th1 cell did not change significantly, the percentage of Th2 cell decreased, and the Th1/Th2 cell ratio increased in the allergic asthma group by the end of the last treatment (P < 0.05). Meanwhile, the release of IgE and IL-4 reduced (P < 0.05), and the release of IFN-γ did not significantly change in the allergic asthma group. (2) Compared with the control group, the serum levels of IgE and IL-4 and the percentage of Th2 cell were higher, and the Th1/Th2 cell ratio was lower in the allergic asthma group (P < 0.05). There was no significant difference between Th1 cell and IFN-γ before the first treatment. (3) Compared with the control group, the IgE levels and the percentage of Th2 cell were higher in the allergic asthma group (P < 0.01). Simultaneously, there was no significant difference between Th1 cell, the Th1/Th2 cell ratio, and the serum levels of IFN-γ and IL-4 by the end of the last treatment. The data suggested that RHAS reduced the amount of Th2 cell and elevated the Th1/Th2 cell ratio, thereby alleviating the inflammatory responses in the allergic asthma participants.

Transcriptional regulation of NIN expression by IPN2 is required for root nodule symbiosis in Lotus japonicus.

Expression of Nodule Inception (NIN) is essential for initiation of legume-rhizobial symbiosis. An existing model regarding the regulation of NIN expression involves two GRAS transcription factors - NSP1 (Nodulation Signaling Pathway 1) and NSP2. NSP2 forms a complex with NSP1 to directly bind to NIN promoter. However, rhizobial treatment-induced NIN expression could still be detected in the nsp1 mutant plants, suggesting that other proteins must be involved in the regulation of NIN expression. A combination of molecular, biochemical and genetic analyses was used to investigate the molecular basis of IPN2 in regulating root development and NIN expression in Lotus japonicus. In this study, we identified that IPN2 is a close homolog of Arabidopsis APL (ALTERED PHLOEM DEVELOPMENT) with essential function in root development. However, Lotus IPN2 has a different expression pattern compared with the Arabidopsis APL gene. IPN2 binds to the IPN2-responsive cis element (IPN2-RE) of NIN promoter and activates NIN expression. IPN2, NSP1 and NSP2 form a protein complex to directly target NIN promoter and activate NIN expression in the legume-rhizobial symbiosis. Our data refine the regulatory model of NIN expression that NSP2 works together with NSP1 and IPN2 to activate the NIN gene allowing nodulation in L. japonicus.

High-Stability MnOx Nanowires@C@MnOx Nanosheet Core-Shell Heterostructure Pseudocapacitance Electrode Based on Reversible Phase Transition Mechanism.

A stable MnOx @C@MnOx core-shell heterostructure consisting of vertical MnOx nanosheets grown evenly on the surface of the MnOx @carbon nanowires are obtained by simple liquid phase method combined with thermal treatment. The hierarchical MnOx @C@MnOx heterostructure electrode possesses a high specific capacitance of 350 F g-1 and an excellent cycle performance owing to the existence of the pore structure among the ultrasmall MnOx nanoparticles and the rapid transmission of electrons between the active material and carbon coating layer. Particularly, according to the in situ Raman spectra analysis, no characteristic peaks corresponding to MnOOH are found during charging/discharging, indicating that pseudocapacitive behavior of the MnOx electrode have no relevance to the intercalation/deintercalation of protons (H+ ) in the electrolyte. Further combining in situ X-ray powder diffraction analysis, the diffraction peak of α-MnO2 can be detected in the process of charging, while Mn3 O4 phase is found in discharge products. Therefore, these results demonstrate that the MnOx undergoes a reversible phase transformation reaction of Mn3 O4 ↔α-MnO2 . Moreover, the assembled all-solid-state asymmetric supercapacitor with a MnOx @C@MnOx electrode delivers a high energy density of 23 Wh kg-1 , an acceptable power density of 2500 W kg-1 , and an excellent cyclic stability performance of 94% after 2000 cycles, showing the potential for practical application.

Suppression of innate immunity mediated by the CDPK-Rboh complex is required for rhizobial colonization in Medicago truncatula nodules.

Suppression of innate immunity is essential for rhizobial infection and colonization in compatible interactions with leguminous plants. In Medicago nad1 mutant plants, innate immunity is excessively activated, resulting in necrotic cell death after rhizobia are released from infection threads into symbiotic cells, suggesting that innate immunity plays a critical role in regulating bacteroid persistence. In this study, we identified three respiratory burst oxidase homologs (Rboh) and one calcium-dependent protein kinase (CDPK) as key factors for the activation of immunity in Medicago nodules using genetic and biochemical methods. Knock-out of either MtRbohB or MtRbohD in nad1-1 mutant plants produced effective nodules with intact symbiotic cells, while knock-out of MtRbohC decreased brown pigment deposition, leading to less necrosis in nad1-1 mutant nodules. MtCDPK5 directly phosphorylated MtRbohB, MtRbohC and MtRbohD, which triggered immune responses in plants. Knock-out of MtCDPK5 in nad1-1 mutant plants partially restored nitrogen-fixing nodules. Overexpression of the constitutively activated variant MtCDPK5VK under the control of the NAD1 promoter elicited strong immune responses, resulting in ineffective nodules in wild-type plants. Our data provide direct evidence that host plants utilize innate immunity to regulate rhizobial colonization in symbiotic cells in Medicago truncatula.

Construction of Hierarchical α-MnO2 Nanowires@Ultrathin δ-MnO2 Nanosheets Core-Shell Nanostructure with Excellent Cycling Stability for High-Power Asymmetric Supercapacitor Electrodes.

Poor electrical conductivity and mechanical instability are two major obstacles to realizing high performance of MnO2 as pseudocapacitor material. The construction of unique hierarchical core-shell nanostructures, therefore, plays an important role in the efficient enhancement of the rate capacity and the stability of this material. We herein report the fabrication of a hierarchical α-MnO2 nanowires@ultrathin δ-MnO2 nanosheets core-shell nanostructure by adopting a facile and practical solution-phase technique. The novel hierarchical nanostructures are composed of ultrathin δ-MnO2 nanosheets with a few atomic layers growing well on the surface of the ultralong α-MnO2 nanowires. The first specific capacitance of hierarchical core-shell nanostructure reached 153.8 F g(-1) at the discharge current density of as high as 20 A g(-1), and the cycling stability is retained at 98.1% after 10,000 charge-discharge cycles, higher than those in the literature. The excellent rate capacity and stability of the hierarchical core-shell nanostructures can be attributed to the structural features of the two MnO2 crystals, in which a 1D α-MnO2 nanowire core provides a stable structural backbone and the ultrathin 2D δ-MnO2 nanosheet shell creates more reactive active sites. The synergistic effects of different dimensions also contribute to the superior rate capability.

Preparation of size-selective Mn3O4 hexagonal nanoplates with superior electrochemical properties for pseudocapacitors.

Porous Mn3O4 hexagonal nanoplates were synthesized through annealing the hydrohausmannite precursor obtained by a one-pot hydrothermal process and by precisely controlling the concentrations of potassium hydroxide and glucose. The effect of potassium hydroxide and glucose on the growth of hexagonal nanoplates was investigated, and a growth mechanism was also proposed. Due to its abundant pores, the pure Mn3O4-based electrode exhibits excellent cycling stability with 100% capacity retention after 5000 cycles. The asymmetric supercapacitor exhibited high performance with an energy density of 17.276 W h kg(-1) at a power density of 207.3 W kg(-1) in a wide potential window of 1.5 V.

In situ catalytic synthesis of high-graphitized carbon-coated LiFePO4 nanoplates for superior Li-ion battery cathodes.

The low electronic conductivity and one-dimensional diffusion channel along the b axis for Li ions are two major obstacles to achieving high power density of LiFePO4 material. Coating carbon with excellent conductivity on the tailored LiFePO4 nanoparticles therefore plays an important role for efficient charge and mass transport within this material. We report here the in situ catalytic synthesis of high-graphitized carbon-coated LiFePO4 nanoplates with highly oriented (010) facets by introducing ferrocene as a catalyst during thermal treatment. The as-obtained material exhibits superior performances for Li-ion batteries at high rate (100 C) and low temperature (-20 °C), mainly because of fast electron transport through the graphitic carbon layer and efficient Li(+)-ion diffusion through the thin nanoplates.

Tunable morphology synthesis of LiFePO4 nanoparticles as cathode materials for lithium ion batteries.

Olivine LiFePO4 with nanoplate, rectangular prism nanorod and hexagonal prism nanorod morphologies with a short b-axis were successfully synthesized by a solvothermal in glycerol and water system. The influences of solvent composition on the morphological transformation and electrochemical performances of olivine LiFePO4 are systematically investigated by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and galvanostatic charge-discharge tests. It is found that with increasing water content in solvent, the LiFePO4 nanoplates gradually transform into hexagonal prism nanorods that are similar to the thermodynamic equilibrium shape of the LiFePO4 crystal. This indicates that water plays an important role in the morphology transformation of the olivine LiFePO4. The electrochemical performances vary significantly with the particle morphology. The LiFePO4 rectangular prism nanorods (formed in a glycerol-to-water ratio of 1:1) exhibit superior electrochemical properties compared with the other morphological particles because of their moderate size and shorter Li(+) ion diffusion length along the [010] direction. The initial discharge capacity of the LiFePO4@C with a rectangular prism nanorod morphology reaches to 163.8 mAh g(-1) at 0.2 C and over 75 mAh g(-1) at the high discharging rate of 20 C, maintaining good stability at each discharging rate.

Electrostatic Assembly of Peptide Nanofiber-Biomimetic Silver Nanowires onto Graphene for Electrochemical Sensors.

Biomacromolecules and their assemblies have the unique ability for biomimetic promotion of the formation of novel and functional nanomaterials. In this work, artificial peptide nanofibers were created with a special designed peptide molecule that contains complex motif sequences and then further metallized to synthesize nanofiber-based silver nanowires. A novel hybrid nanomaterial was obtained successfully by assembling the prepared silver nanowires on graphene nanosheets, and its potential application in nonenzymatic electrochemical H2O2 sensing was explored. This fabricated sensor based on graphene and silver nanowires exhibits high sensitivity and selectivity, low detection limit, and wide linear range for the determination of H2O2.

Synthesis of foam-like freestanding Co3O4 nanosheets with enhanced electrochemical activities.

We report a facile and simple strategy to synthesize freestanding Co(3)O(4) nanosheets on conductive substrates. The as-prepared product shows two-dimensional hexagons in morphology with mesoporous inside architecture.