RESUMO
Near-eye displays are widely recognized as a groundbreaking technological advancement with the potential to significantly impact daily life. Within the realm of near-eye displays, micro-LEDs have emerged as a highly promising technology owing to their exceptional optical performance, compact form factor, and low power consumption. However, a notable challenge in integrating micro-LEDs into near-eye displays is the efficient light collimation across a wide spectrum range. In this paper, we propose what we believe to be a novel design of a broadband beam collimation metasurface for full-color micro-LEDs by harnessing wavefront phase modulation based on Huygens' principle. Our results demonstrate a substantial reduction in the full width at half maximum (FWHM) angles, achieving a reduction to 1/10, 1/10, and 1/20 for red, green, and blue micro-LEDs compared to those without the metasurface, which is the best collimation result as far as we know. The central light intensity increases by 24.60, 36.49, and 42.15 times. Furthermore, the significant enhancement in the light energy within ±10° is achieved, with the respective multiplication factors of 14.16, 15.60, and 13.00. This metasurface has the potential to revolutionize the field by enabling high-performance, compact, and lightweight micro-LED displays, with applications in near-eye displays, micro-projectors, and beyond.
RESUMO
The three-primary-color chip array is the most straightforward to realize full-color micro-LED displays. However, the luminous intensity distribution shows high inconsistency between the AlInP-based red micro-LED and GaN-based blue / green micro-LEDs, resulting in the issue of angular color shift with different viewing angles. This Letter analyzes the angular dependence of color difference of conventional three-primary-color micro-LEDs, and proves that the inclined sidewall with homogeneous Ag coating has a limited angular regulation effect for micro-LEDs. Based on this, a patterned conical microstructure array is designed on the micro-LED's bottom layer to effectively eliminate the color shift. This design cannot only regulate the emission of full-color micro-LEDs to perfectly meet Lambert's cosine law without any external beam shaping elements, but also improve the light extraction efficiency of top emission by 16%, 161%, and 228% for red, green, and blue micro-LEDs, respectively. The color shift Δ u ' v ' of the full-color micro-LED display is also kept below 0.02 with the viewing angle ranging from 10° to 90°.