RESUMO
Graphite nanoplatelets (GNPs)-the segregated ultra-high molecular weight polyethylene (UHMWPE)-based composites with hybrid filler-decorated with Fe3O4 were developed. Using X-ray diffraction and scanning electron microscopy, it was shown that the decorated component has the shape of separate granules, or their clusters were distributed evenly over the GNPs surface. The individual Fe3O4 nanoparticles are predominantly rounded, with diameters of approximately 20-60 nm. The use of GNPs/Fe3O4 as a filler leads to significant decreases in the percolation limit φc, 0.97 vol% vs. 0.56 vol% for GNPs/UHMWPE- and (GNPs/Fe3O4)/UHMWPE segregated composite material (SCM), respectively. Modification of the GNP surface with Fe3O4 leads to an essential improvement in the electromagnetic interference shielding due to enhanced microwave absorption in the 26-37 GHz frequency range in its turn by abundant surface functional groups and lattice defects of GNPs/Fe3O4 nanoparticles.
RESUMO
Fifty percents absorption by thin film, with thickness is much smaller than the skin depth and optical thickness much smaller than the wavelength, is a well-known concept of classical electrodynamics. This is a valuable feature that has been numerously widely explored for metal films, while chemically inert nanomembranes are a real fabrication challenge. Here we report the 20 nm thin pyrolyzed carbon film (PyC) placed on 300 nm thick silicon nitride (Si3N4) membrane demonstrating an efficient broadband absorption in the terahertz and near infrared ranges. While the bare Si3N4membrane is completely transparent in the THz range, the 20 nm thick PyC layer increases the absorption of the PyC coated Si3N4membrane to 40%. The reflection and transmission spectra in the near infrared region reveal that the PyC film absorption persists to a level of at least 10% of the incident power. Such a broadband absorption of the PyC film opens new pathways toward broadband bolometric radiation detectors.
RESUMO
One-dimensional carbon nanotubes (CNTs) are promising for future nanoelectronics and optoelectronics, and an understanding of electrical contacts is essential for developing these technologies. Although significant efforts have been made in this direction, the quantitative behavior of electrical contacts remains poorly understood. Here, we investigate the effect of metal deformations on the gate voltage dependence of the conductance of metallic armchair and zigzag CNT field effect transistors (FETs). We employ density functional theory calculations of deformed CNTs under metal contacts to demonstrate that the current-voltage characteristics of the FET devices are qualitatively different from those expected for metallic CNT. We predict that, in the case of armchair CNT, the gate-voltage dependence of the conductance shows an ON/OFF ratio of about a factor of two, nearly independent of temperature. We attribute the simulated behavior to modification of the band structure under the metals caused by deformation. Our comprehensive model predicts a distinct feature of conductance modulation in armchair CNTFETs induced by the deformation of the CNT band structure. At the same time, the deformation in zigzag metallic CNTs leads to a band crossing but not to a bandgap opening.
RESUMO
Widely used in neuroscience the averaging of event related potentials is based on the assumption that small responses to the investigated events are present in every trial but can be hidden under the random noise. This situation often takes place, especially in experiments performed at hierarchically lower levels of sensory systems. However, in the studies of higher order complex neuronal networks evoked responses might appear only under particular conditions and be absent otherwise. We encountered this problem studying a propagation of interoceptive information to the cortical areas in the sleep-wake cycle. Cortical responses to various visceral events were present during some periods of sleep, then disappeared for a while and restored again after a period of absence. Further investigation of the viscero-cortical communication required a method that would allow labeling the trials contributing to the averaged event related responses-"efficient trials," and separating them from the trials without any response. Here we describe a heuristic approach to solving this problem in the context of viscero-cortical interactions occurring during sleep. However, we think that the proposed technique can be applicable to any situation where neuronal processing of the same events is expected to be variable due to internal or external factors modulating neuronal activity. The method was first implemented as a script for Spike 2 program version 6.16 (CED). However, at present a functionally equivalent version of this algorithm is also available as Matlab code at https://github.com/george-fedorov/erp-correlations.
Assuntos
Eletroencefalografia , Potenciais Evocados , Eletroencefalografia/métodos , Potenciais Evocados/fisiologia , Algoritmos , Neurônios , SonoRESUMO
Polymer composites containing nanocarbon fillers are under intensive investigation worldwide due to their remarkable electromagnetic properties distinguished not only by components as such, but the distribution and interaction of the fillers inside the polymer matrix. The theory herein reveals that a particular effect connected with the homogeneity of a composite manifests itself in the terahertz range. Transmission time-domain terahertz spectroscopy was applied to the investigation of nanocomposites obtained by co-extrusion of PLA polymer with additions of graphene nanoplatelets and multi-walled carbon nanotubes. The THz peak of permittivity's imaginary part predicted by the applied model was experimentally shown for GNP-containing composites both below and above the percolation threshold. The physical nature of the peak was explained by the impact on filler particles excluded from the percolation network due to the peculiarities of filler distribution. Terahertz spectroscopy as a versatile instrument of filler distribution diagnostics is discussed.
RESUMO
Plasmonic interferometry is a rapidly growing area of research with a huge potential for applications in the terahertz frequency range. In this Letter, we explore a plasmonic interferometer based on graphene field effect transistor connected to specially designed antennas. As a key result, we observe helicity- and phase-sensitive conversion of circularly polarized radiation into dc photovoltage caused by the plasmon-interference mechanism: two plasma waves, excited at the source and drain part of the transistor, interfere inside the channel. The helicity-sensitive phase shift between these waves is achieved by using an asymmetric antenna configuration. The dc signal changes sign with inversion of the helicity. A suggested plasmonic interferometer is capable of measuring the phase difference between two arbitrary phase-shifted optical signals. The observed effect opens a wide avenue for phase-sensitive probing of plasma wave excitations in two-dimensional materials.
RESUMO
Plasmons, collective oscillations of electron systems, can efficiently couple light and electric current, and thus can be used to create sub-wavelength photodetectors, radiation mixers, and on-chip spectrometers. Despite considerable effort, it has proven challenging to implement plasmonic devices operating at terahertz frequencies. The material capable to meet this challenge is graphene as it supports long-lived electrically tunable plasmons. Here we demonstrate plasmon-assisted resonant detection of terahertz radiation by antenna-coupled graphene transistors that act as both plasmonic Fabry-Perot cavities and rectifying elements. By varying the plasmon velocity using gate voltage, we tune our detectors between multiple resonant modes and exploit this functionality to measure plasmon wavelength and lifetime in bilayer graphene as well as to probe collective modes in its moiré minibands. Our devices offer a convenient tool for further plasmonic research that is often exceedingly difficult under non-ambient conditions (e.g. cryogenic temperatures) and promise a viable route for various photonic applications.
RESUMO
A rotating disk composed of alternating light and dark segments may give rise to the wagon wheel illusion: a perceptual reversal in rotation direction. Continuously illuminated (eg in daylight) as well as discretely presented (eg stroboscopic or computer-animated) versions of the illusion exist; here, we investigated the discrete version. Prominence of the illusion is commonly believed to depend on temporal frequency of rotation, but frequency effects have been unsystematic across previous experiments. Here, illusion strength is shown instead to lawfully depend on an attraction function of angular displacement between successive frames (experiments 1 and 2). We studied the illusion across a wider range of this factor than previously and as a result obtained unusually strong effects (up to 100% reversal). In two further experiments we showed that this is because the effect of the attraction function on the wagon wheel illusion strength is modulated by a perceived increase in the number of spokes of the wheel, a phenomenon generally known as the frequency doubling illusion. These factors combine to offer a unifying explanation of the wagon wheel illusion, at least under discrete presentation and possibly under continuous presentation conditions as well.
Assuntos
Sensibilidades de Contraste , Percepção de Distância , Percepção de Forma , Percepção de Movimento , Ilusões Ópticas , Orientação , Rotação , Percepção Espacial , Adolescente , Adulto , Feminino , Humanos , Masculino , Estimulação Luminosa , Estroboscopia , Adulto JovemRESUMO
Three-terminal devices with conduction channels formed by quasi-metallic carbon nanotubes (CNTs) are shown to operate as nanotube-based field-effect transistors under strong magnetic fields. The off-state conductance of the devices varies exponentially with the magnetic flux intensity. We extract the quasi-metallic CNT chirality as well as the characteristics of the Schottky barriers formed at the metal-nanotube contacts from the temperature-dependent magnetoconductance measurements.