A Multiresponsive Ferrocene-Based Chiral Overcrowded Alkene Twisting Liquid Crystals.

The reversible modulation of chirality has gained significant attention not only for fundamental stereochemical studies but also for numerous applications ranging from liquid crystals (LCs) to molecular motors and machines. This requires the construction of switchable molecules with (multiple) chiral elements in a highly enantioselective manner, which is often a significant synthetic challenge. Here, we show that the dimerization of an easily accessible enantiopure planar chiral ferrocene-indanone building block affords a multi-stimuli-responsive dimer (FcD) with pre-determined double bond geometry, helical chirality, and relative orientation of the two ferrocene motifs in high yield. This intrinsically planar chiral switch can not only undergo thermal or photochemical E/Z isomerization but can also be reversibly and quantitatively oxidized to both a monocationic and a dicationic state which is associated with significant changes in its (chir)optical properties. Specifically, FcD acts as a chiral dopant for cholesteric LCs with a helical twisting power (HTP) of 13 µm-1 which, upon oxidation, drops to near zero, resulting in an unprecedently large redox-tuning of the LC reflection color by up to 84 nm. Due to the straightforward stereoselective synthesis, FcD, and related chiral switches, are envisioned to be powerful building blocks for multi-stimuli-responsive molecular machines and in LC-based materials.

Mix and Match Tuning of the Conformational and Multistate Redox Switching Properties of an Overcrowded Alkene.

Overcrowded alkenes have received considerable attention as versatile structural motifs in a range of optical switches and light-driven unidirectional motors. In contrast, their actuation by electrochemical stimuli remains underexplored, even though this alternative energy input may be preferred in various applications and enables additional control over molecular switching states and properties. While symmetric bistricyclic overcrowded enes (BAEs) containing two identical halves based on either thioxanthene (TX) or acridine (Acr) motifs are known to be reversible conformational redox switches, their redox potentials are generally too high or low, respectively, thereby preventing wider applications. Herein, we demonstrate that the "mixed" TX-Acr switch possesses redox properties that lie between those of its parent symmetric analogs, enabling interconversion between three stable redox and conformational states at mild potentials. This includes the neutral anti-folded, the dicationic orthogonal, and a unique twisted monoradical cation state, the latter of which is only accessible in the case of the mixed TX-Acr switch and in a pathway-dependent manner. Consequently, with this multistate redox switch, a myriad of molecular properties, including geometry, polarity, absorbance, and fluorescence, can be modulated with high fidelity and reversibility between three distinct stable states. More generally, this study highlights the versatility of the "mix and match" approach in rationally designing redox switches with specific (redox) properties, which in turn is expected to enable a myriad of applications ranging from molecular logic and memory to actuators and energy storage systems.

Introduction of Molecular Complexity via the Cross-Coupling of Lithium 1,4-Dioxene with Aryl Bromides.

The synthetic potential of substituted 1,4-dioxenes is well recognised, although the chemistry of 2-aryl-1,4-dioxenes is relatively unexplored. Their transition metal-catalysed synthesis has been limited to Stille-type cross-coupling chemistry, typically showing long reaction times, or proceeding at high reaction temperatures. Here we present a facile and general methodology for the cross-coupling of aryl bromides with lithium 1,4-dioxene, affording a range of 2-aryl-1,4-dioxenes in generally good yields. We highlight the synthetic applicability of this transformation at multigram scale, and demonstrate the versatility of the products by conversion of the dioxene units to various carbonyl-based functionalities. Additionally, we present a concise two-step synthesis of an arylated analogue to a known 1,4-dioxene-based antifungal agent.

Photocleavable Protecting Groups Using a Sulfite Self-Immolative Linker for High Uncaging Quantum Yield and Aqueous Solubility.

Using light as an external stimulus to control (bio)chemical processes offers many distinct advantages. Most importantly, it allows for spatiotemporal control simply through operating the light source. Photocleavable protecting groups (PPGs) are a cornerstone class of compounds that are used to achieve photocontrol over (bio)chemical processes. PPGs are able to release a payload of interest upon light irradiation. The successful application of PPGs hinges on their efficiency of payload release, captured in the uncaging Quantum Yield (QY). Heterolytic PPGs efficiently release low pKa payloads, but their efficiency drops significantly for payloads with higher pKa values, such as alcohols. For this reason, alcohols are usually attached to PPGs via a carbonate linker. The self-immolative nature of the carbonate linker results in concurrent release of CO2 with the alcohol payload upon irradiation. We introduce herein novel PPGs containing sulfites as self-immolative linkers for photocaged alcohol payloads, for which we discovered that the release of the alcohol proceeds with higher uncaging QY than an identical payload released from a carbonate-linked PPG. Furthermore, we demonstrate that uncaging of the sulfite-linked PPGs results in the release of SO2 and show that the sulfite linker improves water solubility as compared to the carbonate-based systems.

Waterborne polymers and coatings from bio-based butenolides.

In the quest for sustainable paints and coatings, bio-based resources for the polymeric binder constituents are key. Recently, we introduced poly-butenolides as bio-based acrylate replacement for solventborne and 100% solids (UV-curing) coatings. Here, we report the first step towards aqueous poly-butenolide dispersions, enabling the use of this novel binder technology platform in waterborne coatings.

Visible and near-infrared light-induced photoclick reactions.

Photoclick reactions combine the advantages offered by light-driven processes, that is, non-invasive and high spatiotemporal control, with classical click chemistry and have found applications ranging from surface functionalization, polymer conjugation, photocrosslinking, protein labelling and bioimaging. Despite these advances, most photoclick reactions typically require near-ultraviolet (UV) and mid-UV light to proceed. UV light can trigger undesirable responses, including cellular apoptosis, and therefore, visible and near-infrared light-induced photoclick reaction systems are highly desirable. Shifting to a longer wavelength can also reduce degradation of the photoclick reagents and products. Several strategies have been used to induce a bathochromic shift in the wavelength of irradiation-initiating photoclick reactions. For instance, the extension of the conjugated π-system, triplet-triplet energy transfer, multi-photon excitation, upconversion technology, photocatalytic and photoinitiation approaches, and designs involving photocages have all been used to achieve this goal. Current design strategies, recent advances and the outlook for long wavelength-driven photoclick reactions are presented.

Getting a molecular grip on the half-lives of iminothioindoxyl photoswitches.

Visible-light-operated photoswitches are of growing interest in reversibly controlling molecular processes, enabling for example the precise spatiotemporal focusing of drug activity and manipulating the properties of materials. Therefore, many research efforts have been spent on seeking control over the (photo)physical properties of photoswitches, in particular the absorption maxima and the half-life. For photopharmacological applications, photoswitches should ideally be operated by visible light in at least one direction, and feature a metastable isomer with a half-life of 0.1-10 seconds. Here we present our efforts towards the engineering of the half-life of iminothioindoxyl (ITI) photoswitches, a recently discovered class of visible-light-responsive photochromes, whose applicability was hitherto limited by half-lives in the low millisecond range. Through the synthesis and characterization of a library of ITI photoswitches, we discovered variants with a substantially increased thermal stability, reaching half-lives of up to 0.2 seconds. Based on spectroscopic and computational analyses, we demonstrate how different substituent positions on the ITI molecule can be used to tune its photophysical properties independently to fit the desired application. Additionally, the unique reactivity of the ITI derivative that featured a perfluoro-aromatic ring and had the most long-lived metastable state was shown to be useful for labeling of nucleophilic functional groups. The present research thus paves the way for using ITI photoswitches in photopharmacology and chemical biology.

Substituent effects on first generation photochemical molecular motors probed by femtosecond stimulated Raman.

Unidirectional photochemical molecular motors can act as a power source for molecular machines. The motors operate by successive excited state isomerization and ground state helix inversion reactions, attaining unidirectionality from an interplay of steric strain and stereochemistry. Optimizing the yield of the excited state isomerization reaction is an important goal that requires detailed knowledge of excited state dynamics. Here, we investigate the effect of electron withdrawing and donating substituents on excited state structure and ultrafast dynamics in a series of newly synthesized first generation photochemical molecular motors. All substituents red-shift the absorption spectra, while some modify the Stokes shift and render the fluorescence quantum yield solvent polarity dependent. Raman spectra and density functional theory calculations reveal that the stretching mode of the C=C "axle" in the electronic ground state shows a small red-shift when conjugated with electron withdrawing substituents. Ultrafast fluorescence measurements reveal substituent and solvent polarity effects, with the excited state decay being accelerated by both polar solvent environment and electron withdrawing substituents. Excited state structural dynamics are investigated by fluorescence coherence spectroscopy and femtosecond stimulated Raman spectroscopy. The time resolved Raman measurements are shown to provide structural data specifically on the Franck-Condon excited state. The C=C localized modes have a different substituent dependence compared to the ground state, with the unsubstituted motor having the most red-shifted mode. Such measurements provide valuable new insights into pathways to optimize photochemical molecular motor performance, especially if they can be coupled with high-quality quantum molecular dynamics calculations.

Modulation of the isomerization of iminothioindoxyl switches by supramolecular confinement.

Here we present the formation of an iminothioindoxyl (ITI)⊂Cage complex that retains the photochemical properties of the photoswitch within a confined environment in water. At the same time, besides ultrafast switching inside the cage, the ITI photoswitch displays an intriguing bifurcation of the excited state isomerization pathway when encapsulated.

All-visible-light-driven salicylidene schiff-base-functionalized artificial molecular motors.

Light-driven rotary molecular motors are among the most promising classes of responsive molecular machines and take advantage of their intrinsic chirality which governs unidirectional rotation. As a consequence of their dynamic function, they receive considerable interest in the areas of supramolecular chemistry, asymmetric catalysis and responsive materials. Among the emerging classes of responsive photochromic molecules, multistate first-generation molecular motors driven by benign visible light remain unexplored, which limits the exploitation of the full potential of these mechanical light-powered systems. Herein, we describe a series of all-visible-light-driven first-generation molecular motors based on the salicylidene Schiff base functionality. Remarkable redshifts up to 100 nm in absorption are achieved compared to conventional first-generation motor structures. Taking advantage of all-visible-light-driven multistate motor scaffolds, adaptive behaviour is found as well, and potential application in multistate photoluminescence is demonstrated. These functional visible-light-responsive motors will likely stimulate the design and synthesis of more sophisticated nanomachinery with a myriad of future applications in powering dynamic systems.

With or without a co-solvent? highly efficient ultrafast phenanthrenequinone-electron rich alkene (PQ-ERA) photoclick reactions.

The light-induced photocycloaddition of 9,10-phenanthrenequinone (PQ) with electron-rich alkenes (ERA), known as the PQ-ERA reaction, is a highly attractive photoclick reaction characterized by its operational simplicity and high biocompatibility. One essential aspect of photoclick reactions is their high rate, however the limited solubility of PQs often requires the use of a co-solvent. Evaluating the effect of different co-solvents on the PQ-ERA reaction and their influence on the reaction rate, we discovered that sulfur-containing compounds, in particular the frequently used solubilizing co-solvent DMSO, quench the triplet state of the PQ. These experimental results, supported by nanosecond-microsecond and ultrafast transient absorption data, show that even minimal amounts of DMSO result in a decreased lifetime of the reactive triplet state, essential for the photoclick reaction. Without DMSO as co-solvent, exceptionally high photoreaction quantum yields ( Φ P up to 93% with only 1 equivalent ERA) and complete conversion in seconds can be achieved. With these outstanding efficiencies, the PQ-ERA reaction can be used without excess ERA and at low light intensities, facilitating photoclick transformations in various future applications.

Redox-Switchable Aromaticity in a Helically Extended Indeno[2,1-c]fluorene.

Molecular switches have received major attention to enable the reversible modulation of various molecular properties and have been extensively used as trigger elements in diverse fields, including molecular machines, responsive materials, and photopharmacology. Antiaromaticity is a fascinating property that has attracted not only significant fundamental interest but is also increasingly relevant in different applications, in particular organic (opto)electronics. However, designing systems in which (anti)aromaticity can be judiciously and reversibly switched ON and OFF remains challenging. Herein, we report a helicene featuring an indenofluorene-bridged bisthioxanthylidene as a novel switch wherein a simultaneous two-electron (electro)chemical redox process allows highly reversible modulation of its (anti)aromatic character. Specifically, the two thioxanthylidene rotors, attached to the initially aromatic indenofluorene scaffold via overcrowded alkenes, adopt an anti-folded structure, which upon oxidation convert to singly bonded, twisted conformations. This is not only associated with significant (chir)optical changes but importantly also results in formation of the fully conjugated, formally antiaromatic as-indacene motif in the helical core of the switch. This process proceeds without the buildup of radical cation intermediates and thus enables highly reversible switching of molecular geometry, aromaticity, absorbance, and chiral expression under ambient conditions, as evidenced by NMR, UV-vis, CD, and (spectro)electrochemical analyses, supported by DFT calculations. We expect this concept to be extendable to a wide range of robust antiaromatic-aromatic switches and to provide a basis for modulation of the structure and properties of these fascinating inherently chiral polycyclic π-scaffolds.

The relevance of sustainable laboratory practices.

Scientists are of key importance to the society to advocate awareness of the climate crisis and its underlying scientific evidence and provide solutions for a sustainable future. As much as scientific research has led to great achievements and benefits, traditional laboratory practices come with unintended environmental consequences. Scientists, while providing solutions to climate problems and educating the young innovators of the future, are also part of the problem: excessive energy consumption, (hazardous) waste generation, and resource depletion. Through their own research operations, science, research and laboratories have a significant carbon footprint and contribute to the climate crisis. Climate change requires a rapid response across all sectors of society, modeled by inspiring leaders. A broader scientific community that takes concrete actions would serve as an important step in convincing the general public of similar actions. Over the past years, grassroots movements across the sciences have recognized the overlooked impact of the scientific enterprise, and so-called Green Lab initiatives emerged seeking to address the environmental footprint of research. Driven by the voluntary efforts of researchers and staff, they educate peers, develop sustainability guidelines, write scientific publications and maintain accreditation frameworks. With this perspective we want to advocate for and spark leadership to promote a systemic change in laboratory practices and approach to research. Comprehensive evidence for the environmental impact of laboratories and their root-causes is presented, expanded with data from a current case study of the University of Groningen showcasing annual savings of 398 763 € as well as 477.1 tons of CO2e. This is followed by guidelines for sustainable lab practices and hands-on advice on how to achieve a systemic change at research institutions and industry. How can we expect industry, politics, and society to change, if we as scientists are not changing either? Scientists should lead by example and practice the change they want to see.

Push-Pull Bis-Norbornadienes for Solar Thermal Energy Storage.

Invited for the cover of this issue are Ben L. Feringa and co-workers at the University of Groningen. The image depicts an autumn forest with the five molecular switches from our study cycling between their two isomers in the sunlight. Read the full text of the article at 10.1002/chem.202400482.

Converting inorganic sulfur into degradable thermoplastics and adhesives by copolymerization with cyclic disulfides.

Converting elementary sulfur into sulfur-rich polymers provides a sustainable strategy to replace fossil-fuel-based plastics. However, the low ring strain of eight-membered rings, i.e., S8 monomers, compromises their ring-opening polymerization (ROP) due to lack of an enthalpic driving force and as a consequence, poly(sulfur) is inherently unstable. Here we report that copolymerization with cyclic disulfides, e.g., 1,2-dithiolanes, can enable a simple and energy-saving way to convert elementary sulfur into sulfur-rich thermoplastics. The key strategy is to combine two types of ROP-both mediated by disulfide bond exchange-to tackle the thermodynamic instability of poly(sulfur). Meanwhile, the readily modifiable sidechain of the cyclic disulfides provides chemical space to engineer the mechanical properties and dynamic functions over a large range, e.g., self-repairing ability and degradability. Thus, this simple and robust system is expected to be a starting point for the organic transformation of inorganic sulfur toward sulfur-rich functional and green plastics.

Synthesis of Styrylbenzazole Photoswitches and Evaluation of their Photochemical Properties.

Styrylbenzazoles form a promising yet under-represented class of photoswitches that can perform a light-driven E-Z isomerization of the central alkene double bond without undergoing irreversible photocyclization, typical of the parent stilbene. In this work, we report the synthesis and photochemical study of 23 styrylbenzazole photoswitches. Their thermal stabilities, quantum yields, maximum absorption wavelengths and photostationary state (PSS) distributions can be tuned by changing the benzazole heterocycle and the substitution pattern on the aryl ring. In particular, we found that push-pull systems show large redshifts of the maximum absorption wavelengths and the highest quantum yields, whereas ortho-substituted styrylbenzazole photoswitches exhibit the most favorable PSS ratios. Taking advantage of both design principles, we produced 2,6-dimethyl-4-(dimethylamino)-styrylbenzothiazole, a thermally stable and efficient P-type photoswitch which displays negative photochromism upon irradiation with visible light up to 470 nm to obtain a near-quantitative isomerization with a very high quantum yield of 59 %. Furthermore, 4-hydroxystyrylbenzoxazole was demonstrated to be a pH-sensitive switch which exhibits a 100 nm redshift upon deprotonation. Ortho-methylation of its benzothiazole analogue improved the obtained PSS ratio in its deprotonated state from E : Z=53 : 47 to E : Z=18 : 82. We anticipate that this relatively unexplored class of photoswitches will form a valuable expansion of the current family of photoswitches.

Process Intensification of the Continuous Synthesis of Bio-Derived Monomers for Sustainable Coatings Using a Taylor Vortex Flow Reactor.

We describe the optimization and scale-up of two consecutive reaction steps in the synthesis of bio-derived alkoxybutenolide monomers that have been reported as potential replacements for acrylate-based coatings (Sci. Adv.2020, 6, eabe0026). These monomers are synthesized by (i) oxidation of furfural with photogenerated singlet oxygen followed by (ii) thermal condensation of the desired 5-hydroxyfuranone intermediate product with an alcohol, a step which until now has involved a lengthy batch reaction. The two steps have been successfully telescoped into a single kilogram-scale process without any need to isolate the 5-hydroxyfuranone between the steps. Our process development involved FTIR reaction monitoring, FTIR data analysis via 2D visualization, and two different photoreactors: (i) a semicontinuous photoreactor based on a modified rotary evaporator, where FTIR and 2D correlation spectroscopy (2D-COS) revealed the loss of the methyl formate coproduct, and (ii) our fully continuous Taylor Vortex photoreactor, which enhanced the mass transfer and permitted the use of near-stoichiometric equivalents of O2. The use of in-line FTIR monitoring and modeling greatly accelerated process optimization in the Vortex reactor. This led to scale-up of the photo-oxidation in 85% yield with a projected productivity of 1.3 kg day-1 and a space-time yield of 0.06 mol day-1 mL-1. Higher productivities could be achieved while sacrificing yield (e.g., 4 kg day-1 at 40% yield). The use of superheated methanol at 200 °C in a pressurized thermal flow reactor accelerated the second step, the thermal condensation of 5-hydroxyfuranone, from a 20 h batch reflux reaction (0.5 L, 85 g) to a space time of <1 min in a reactor only 3 mL in volume operating with projected productivities of >700 g day-1. Proof of concept for telescoping the two steps was established with an overall two-step yield of 67%, producing a process with a projected productivity of 1.1 kg day-1 for the methoxybutenolide monomer without any purification of the 5-hydroxyfuranone intermediate.

All-visible-light-driven stiff-stilbene photoswitches.

Molecular photoswitches are potent tools to construct dynamic functional systems and responsive materials that can be controlled in a non-invasive manner. As P-type photoswitches, stiff-stilbenes attract increasing interest, owing to their superiority in quantum yield, significant geometric differences between isomers, excellent thermostability and robust switching behavior. Nevertheless, the UV-light-triggered photoisomerization of stiff-stilbenes has been a main drawback for decades as UV light is potentially harmful and has low penetration depth. Here, we provided a series of para-formylated stiff-stilbenes by Rieche ortho-formylation to achieve all-visible-light-responsiveness. Additional phenolic groups provide access to late-stage chemical modification facilitating design of molecules responsive to visible light. Remarkably, the photoisomerization of aldehyde-appended stiff-stilbenes could be fully manipulated using visible light, accompanied by a high photostationary state (PSS) distribution. These features render them excellent candidates for future visible-light-controllable smart materials and dynamic systems.

Photoresponsive Biomimetic Functions by Light-Driven Molecular Motors in Three Dimensionally Printed Liquid Crystal Elastomers.

Despite the fascinating developments in design and synthesis of artificial molecular machines operating at the nanoscales, translating molecular motion along multiple length scales and inducing mechanical motion of a three-dimensional macroscopic entity remains an important challenge. The key to addressing this amplification of motion relies on the effective organization of molecular machines in a well-defined environment. By taking advantage of long-range orientational order and hierarchical structures of liquid crystals and unidirectional rotation of light-driven molecular motors, we report here photoresponsive biomimetic functions of liquid crystal elastomers (LCEs) by the repetitive unidirectional rotation of molecular motors using 3D printing. Molecular motors were built in the main chain of liquid crystals oligomers to serve as photoactuators. The oligomers were then used as the ink, and liquid crystal elastomers with different morphologies were printed. The obtained LCEs are able to conduct multiple types of motions including bending, helical coiling, closing of petals, and flipping of wings of a butterfly upon UV illumination, which paves the way for future design of responsive materials with enhanced complex actuating functions.