Arsenate removal from aqueous solution by montmorillonite and organo-montmorillonite magnetic materials.

Magnetic-clay (MtMag) and magnetic-organoclay (O100MtMag) nanocomposites were synthesized, characterized and evaluated for arsenic adsorption. Batch arsenic adsorption experiments were performed varying pH conditions and initial As(V) concentration, while successive adsorption cycles were made in order to evaluate the materials reuse. The highest As(V) removal efficiency (9 ± 1 mg g-1 and 7.8 ± 0.8 mg g-1 for MtMag and O100MtMag, respectively) was found at pH 4.0, decreasing at neutral and alkaline conditions. From As(V) adsorption isotherm, two adsorption processes or two different surface sites were distinguished. Nanocomposites resulted composed by montmorillonite or organo-montmorillonite and magnetite as the principal iron oxide, with saturation magnetization of 8.5 ± 0.5 Am2 Kg-1 (MtMag) and 20.3 ± 0.5 Am2 Kg-1 (O100MtMag). Thus, both materials could be separated and recovered from aqueous solutions using external magnetic fields. Both materials allowed achieving arsenic concentrations lower than the World Health Organization (WHO) recommended concentration limit after two consecutive adsorption cycles (2.25 and 4.5 µg L-1 for MtMag and O100MtMag, respectively).

Norfloxacin adsorption on montmorillonite and carbon/montmorillonite hybrids: pH effects on the adsorption mechanism, and column assays.

The presence of norfloxacin antibiotic (NFX) in drinking water raises significant scientific concern due to the health and environmental problems that may cause. This study aimed to evaluate the NFX removal: 1) in batch adsorption at different pH values on montmorillonite (M) and montmorillonite-carbon hybrids (M-HC); 2) in continuous columns experiments, to assess the technological application of these hybrids as domestic filters, using one M-HC as adsorbent material ranging from 1% to 5%. Batch experiments showed that adsorption occurred in all the samples, being M the material with the highest adsorption capacity (95% of adsorption for cationic NFX). For the M-HC the adsorption seemed to be not strongly dependent of the pH (20%- 41% of adsorption). The characterization of adsorbents and NFX adsorption products (FTIR, XRD, and zeta potential analysis) disclosed that adsorption occurs at both the external surface and the interlayer space of M. For the M-HC synthesized without activation, the interlayer space seemed to be predominantly responsible; while for the activated M-HC the adsorption occurred at the external surface (its interlayer was destroyed). The column experiments revealed that the best adsorption capacity and highest flow were attained using 1% of adsorbent material in the column packing.

Antimicrobial activities of bacterial cellulose - Silver montmorillonite nanocomposites for wound healing.

A nanocomposite based on bacterial cellulose (BC) containing montmorillonite (MMT) modified with silver (BC-MMT-Ag) was developed to be used as potential scaffold for wound healing. Montmorillonite was suspended in silver nitrate solution to incorporate silver in the matrix by ion exchange. The derivative silver clay suspension was used to modify bacterial cellulose membranes by ex situ technique. The BC nanocomposite was analyzed by thermal analysis, scanning electron microscopy, Fourier transform infrared and electron dispersion spectroscopies, X-ray diffraction, and rehydration capacity. The antimicrobial activity of the silver montmorillonite-bacterial cellulose nanocomposite was challenged in cultures of Gram(+) Staphylococcus aureus and Gram(-) Pseudomonas aeruginosa, and showed inhibition of growth in agar plates and biofilm formation as revealed by live-dead assay. Cytotoxicity of BC nanocomposites containing 1% to 25% of MMT-Ag showed good in vitro biocompatibility with L929 fibroblast cells.

Adsorption and characterization of MCPA on DDTMA- and raw-montmorillonite: Surface sites involved.

The 4-chloro-2-methylphenoxy acid (MCPA) is an herbicide widely used in agriculture, which generates a great concern about contamination of surface water and serious consequences for human health and the environment. In this work, the adsorption of MCPA on an Argentine montmorillonite (MMT) and its organo-montmorillonite product (OMMT) with different dodecyl trimethyl ammonium loading was investigated. MCPA adsorption on OMMT increases at least 3 times, with respect to the amount determined for MMT. X-ray diffraction and zeta potential analyses indicated the inner (interlayer) and outer surface participate as adsorption sites. Changes in surface electric charge and also interlayer expansion suggest that dimethyl amine (MCPA counterion) was also surface-adsorbed. The larger aggregates of OMMT, without and with MCPA, obtained compared to those of MMT samples, generate an improvement in the coagulation efficiency. This property, particularly after MCPA retention, allows an easier separation of the solids from the solution and enables a simple technological process application.