RESUMO
This systematic review interrogates the literature to understand what is known about the environmental sustainability of fused filament fabrication, FFF (also known as fused deposition modeling, FDM), based on life cycle assessment (LCA) results. Since substantial energy demand is systematically addressed as one of the main reasons for ecological damage in FFF, mitigation strategies are often based on reducing the printing time (for example, adopting thicker layers) or the embodied energy per part (e.g., by nesting, which means by printing multiple parts in the same job). A key parameter is the infill degree, which can be adjusted to the application requirements while saving printing time/energy and feedstock material. The adoption of electricity from renewable resources is also expected to boost the sustainability of distributed manufacturing through FFF. Meanwhile, bio-based and recycled materials are being investigated as less impactful alternatives to conventional fossil fuel-based thermoplastic filaments.
RESUMO
Metal oxides are a class of material of particular interest for catalytic purposes. Among them the iron oxide as a monolayer supported on gold, FeO/Au, stands out for its capability to promote the CO oxidation and the dissociation of O2 and H2. In this work, we use density functional theory calculations to characterize interfacial properties of this heterostructure. We consider a FeO/Au realistic model system, managing to reproduce the moiré pattern experimentally found. Specific features of the high-symmetry domains of the moiré are identified, providing a robust ground for establishing a structure-activity relationship and guessing how the surface would behave in catalytic conditions. We also describe a strategy to model smaller systems representative of each high-symmetry domains of the moiré, which will be useful in the future to model catalytic reaction mechanisms.
RESUMO
All-solid-state lithium batteries (ASSLBs) have sparked interest due to their far superior energy density compared to current commercial material, but the heightened reactivity of the negative Li electrode can compromise the long-term cyclability of the cell, calling for the introduction of passivating layers or alloy anodes. In this article, we aim to explain the outstanding stability of LiIn alloy-based anodes over extended cycling by comparing its bulk and interface properties to Li-metal. Using density functional theory, we conducted an in-depth analysis of the LiIn surfaces' formation and subsequent structural stability in interfaces with the solid electrolyte ß-Li3PS4. Several LiIn facets are shown to possess sufficient structural stability, with the (110) surface being the most stable. The stable interfaces established with the ß-Li3PS4(100) surface featured favorable adhesion energy, low strain energy, and little reconstruction. By comparing these interface properties with the bulk properties of Li-metal and LiIn, we highlighted the influence of the cohesion energy, Fermi energy level, and band position of the two materials in the long-term stability of their anodes under battery conditions.
RESUMO
This work is focused on performing a quantitative assessment of the environmental impacts associated with an organic synthesis reaction, optimized using an experimental design approach. A nucleophilic substitution reaction was selected, employing vanillin as the substrate, a phenolic compound widely used in the food industry and of pharmaceutical interest, considering its antioxidant and antitumoral potential. To carry out the reaction, three different solvents have been chosen, namely acetonitrile (ACN), acetone (Ace), and dimethylformamide (DMF). The syntheses were planned with the aid of a multivariate experimental design to estimate the best reaction conditions, which simultaneously allow a high product yield and a reduced environmental impact as computed by Life Cycle Assessment (LCA) methodology. The experimental results highlighted that the reactions carried out in DMF resulted in higher yields with respect to ACN and Ace; these reactions were also the ones with lower environmental impacts. The multilinear regression models allowed us to identify the optimal experimental conditions able to guarantee the highest reaction yields and lowest environmental impacts for the studied reaction. The identified optimal experimental conditions were also validated by experimentally conducting the reaction in those conditions, which indeed led to the highest yield (i.e., 93%) and the lowest environmental impacts among the performed experiments. This work proposes, for the first time, an integrated approach of DoE and LCA applied to an organic reaction with the aim of considering both conventional metrics, such as reaction yield, and unconventional ones, such as environmental impacts, during its lab-scale optimization.
RESUMO
OBJECTIVE AND DESIGN: We aimed to identify cytokines whose concentrations are related to lung damage, radiomic features, and clinical outcomes in COVID-19 patients. MATERIAL OR SUBJECTS: Two hundred twenty-six patients with SARS-CoV-2 infection and chest computed tomography (CT) images were enrolled. METHODS: CCL18, CHI3L1/YKL-40, GAL3, ANG2, IP-10, IL-10, TNFα, IL-6, soluble gp130, soluble IL-6R were quantified in plasma samples using Luminex assays. The Mann-Whitney U test, the Kruskal-Wallis test, correlation and regression analyses were performed. Mediation analyses were used to investigate the possible causal relationships between cytokines, lung damage, and outcomes. AVIEW lung cancer screening software, pyradiomics, and XGBoost classifier were used for radiomic feature analyses. RESULTS: CCL18, CHI3L1, and ANG2 systemic levels mainly reflected the extent of lung injury. Increased levels of every cytokine, but particularly of IL-6, were associated with the three outcomes: hospitalization, mechanical ventilation, and death. Soluble IL-6R showed a slight protective effect on death. The effect of age on COVID-19 outcomes was partially mediated by cytokine levels, while CT scores considerably mediated the effect of cytokine levels on outcomes. Radiomic-feature-based models confirmed the association between lung imaging characteristics and CCL18 and CHI3L1. CONCLUSION: Data suggest a causal link between cytokines (risk factor), lung damage (mediator), and COVID-19 outcomes.
Assuntos
COVID-19 , Neoplasias Pulmonares , Humanos , Interleucina-6 , SARS-CoV-2 , Proteína 1 Semelhante à Quitinase-3 , Detecção Precoce de Câncer , Radiômica , Pulmão/diagnóstico por imagem , Citocinas , Quimiocinas CCRESUMO
In order to investigate Li2S as a potential protective coating for lithium anode batteries using superionic electrolytes, we need to describe reactions and transport for systems at scales of >10,000 atoms for time scales beyond nanoseconds, which is most impractical for quantum mechanics (QM) calculations. To overcome this issue, here, we first report the development of the reactive analytical force field (ReaxFF) based on density functional theory (DFT) calculations on model systems at the PBE0/TZVP and M062X/TZVP levels. Then, we carry out reactive molecular dynamics simulations (RMD) for up to 20 ns to investigate the diffusion mechanisms in bulk Li2S as a function of vacancy density, determining the activation barrier for diffusion and conductivity. We show that RMD predictions for diffusion and conductivity are comparable to experiments, while results on model systems are consistent with and validated by short (10-100 ps) ab initio molecular dynamics (AIMD). This new ReaxFF for Li2S systems enables practical RMD on spatial scales of 10-100 nm (10,000 to 10 million atoms) for the time scales of 20 ns required to investigate predictively the interfaces between electrodes and electrolytes, electrodes and coatings, and coatings and electrolytes during the charging and discharging processes.
RESUMO
Lithium-titanium-sulfur cathodes have gained attention because of their unique properties and have been studied for their application in lithium-ion batteries. They offer different advantages such as lower cost, higher safety, and higher energy density with respect to commonly adopted transition metal oxides. Moreover, this family of compounds is free from critical raw materials such as cobalt and nickel. For cathode materials, a crucial aspect is evaluating the evolution and behavior of the structure and properties during the cycling process, which means simulating the system under lithium extraction and insertion. Structural optimization, electronic band structures, density of states, and Raman spectra were simulated, looking for fingerprints and peculiar aspects related to the delithiation and overlithiation process. Lithium transport properties were also investigated through the nudged elastic band methodology. This allowed us to evaluate the diffusion coefficient of lithium, which is a crucial parameter for cathode performance evaluation.
RESUMO
Solid electrolytes have shown superior behavior and many advantages over liquid electrolytes, including simplicity in battery design. However, some chemical and structural instability problems arise when solid electrolytes form a direct interface with the negative Li-metal electrode. In particular, it was recognized that the interface between the ß-Li3PS4 crystal and lithium anode is quite unstable and tends to promote structural defects that inhibit the correct functioning of the device. As a possible way out of this problem, we propose a material, Li2S, as a passivating coating for the Li/ß-Li3PS4 interface. We investigated the mutual affinity between Li/Li2S and Li2S/ß-Li3PS4 interfaces by DFT methods and investigated the structural stability through the adhesion energy and mechanical stress. Furthermore, a topological analysis of the electron density identified preferential paths for the migration of Li ions.
RESUMO
This work is focused on the application of Life Cycle Assessment (LCA) methodology for the quantification of the potential environmental impacts associated with the obtainment of levulinic acid from residual Cynara cardunculus L. biomass and its subsequent valorization in innovative bioplasticizers for tuning the properties as well as the processability of biopolymers. This potentially allows the production of fully biobased and biodegradable bioplastic formulations, thus addressing the issues related to the fossil origin and nonbiodegradability of conventional additives, such as phthalates. Steam explosion pretreatment was applied to the epigean residue of C. cardunculus L. followed by a microwave-assisted acid-catalyzed hydrolysis. After purification, the as-obtained levulinic acid was used to synthesize different ketal-diester derivatives through a three-step selective synthesis. The levulinic acid-base additives demonstrated remarkable plasticizing efficiency when added to biobased plastics. The LCA results were used in conjunction with those from the experimental activities to find the optimal compromise between environmental impacts and mechanical and thermal properties, induced by the bioadditives in poly(3-hydroxybutyrate), PHB biopolymer.
RESUMO
This paper represents the first attempt to quantitatively and reliably assess the environmental sustainability of solution combustion synthesis (SCS) with respect to other soft chemistry strategies, which are more conventionally employed in the preparation of engineered oxide nanomaterials, namely hydrolytic and non-hydrolytic sol-gel syntheses (i. e., HSGS and NHSGS). Indeed, although SCS is well known to rely on significant reduction in the energy as well as time required for the obtainment of the desired nanocrystals, its quantitative environmental assessment and a detailed comparison with other existing synthetic pathways represents an absolute novelty of high scientific desirability in order to pursue a more sustainable development in the inorganic chemistry as well as materials science research fields. TiO2 nanoparticles were selected as the material of choice, for the production of which three slightly modified literature procedures were experimentally reproduced and environmentally evaluated by the application of the comprehensive life cycle assessment (LCA) methodology. Particularly, SCS was compared from an environmental perspective with sol-gel approaches performed both in water and in benzyl alcohol. The results of the present study were also framed among those recently obtained in a systematic study assessing seven further chemical, physical, and biological routes for the synthesis of TiO2 nanoparticles, comprising also flame spray pyrolysis (typically used in industrial productions), highlighting and quantifying the excellent environmental performances of SCS.
RESUMO
Lithium superionic conductor electrolytes may enable the safe use of metallic lithium anodes in all-solid-state batteries. The key to a successful application is a high Li conductivity in the electrolyte material, to be achieved through the maintenance of intimate contact with the electrodes and the knowledge of the chemical nature of that contact. In this manuscript, we tackle this issue by a theoretical ab initio approach. Focusing on the Li6PS5Cl, a thiophosphate with high ionic conductivity, we carry on thorough modeling of the surfaces together with the prediction of the thermal and elastic behaviour. Our investigation leads to some new findings: the bulk structure, as reported in the literature, appears to be metastable, with spontaneous symmetry breaking. Moreover, the relevant stoichiometric surfaces identified for stable and metastable crystal structures are not up-down symmetry related and they expose from one side Li2S and LiCl. Surface reconstructions can be interpreted as local phase transitions. We also predict entirely ab initio the morphology of crystallites, charge, and electrostatic potential at surfaces, together with the effect of temperature on structural properties and the elastic behaviour of this material. Such findings may constitute the relevant groundwork for a better understanding of ionic transport in Li-ion conductors at the electrolyte/anode and electrolyte/cathode interfaces.
RESUMO
The all-solid-state lithium-ion battery is a new class of batteries being developed following today's demand for renewable energy storage, especially for electric cars. The key component of such batteries is the solid-state electrolyte, a technology that promises increased safety and energy density with respect to the traditional liquid electrolytes. In this view, ß-Li3PS4 is emerging as a good solid-state electrolyte candidate due to its stability and ionic conductivity. Despite the number of recent studies on this material, there is still much to understand about its atomic structure, and in particular its surface, a topic that becomes of key relevance for ionic diffusion and chemical stability in grain borders and contact with the other device components. In this study, we performed a density functional study of the structural and electronic properties of ß-Li3PS4 surfaces. Starting from the bulk, we first verified that the thermodynamically stable structure featured slight distortion to the structure. Then, the surfaces were cut along different crystallographic planes and compared with each other. The (100) surface is confirmed as the most stable at T = 298 K, closely followed by (011), (010), and (210). Finally, from the computed surface energies, the Wulff nanocrystals were obtained and it was verified that the growth along the (100) and (011) directions reasonably reproduces the shape of the experimentally observed nanocrystal. With this study, we demonstrate that there are other surfaces besides (100) that are stable and can form interfaces with other components of the battery as well as facilitate the Li-migration according to their porous structures.
RESUMO
The development of high-energy cathode materials for lithium-ion batteries with low content of critical raw materials, such as cobalt and nickel, plays a key role in the progress of lithium-ion batteries technology. In recent works, a novel and promising family of lithium-rich sulfides has received attention. Among the possible structures and arrangement, cubic disordered Li2TiS3 has shown interesting properties, also for the formulation of new cell for all-solid-state batteries. In this work, a computational approach based on DFT hybrid Hamiltonian, localized basis functions and the use of the periodic CRYSTAL code, has been set up. The main goal of the present study is to determine accurate structural, electronic, and spectroscopic properties for this class of materials. Li2TiS3 precursors as Li2S, TiS2, and TiS3 alongside other formulations and structures such as LiTiS2 and monoclinic Li2TiS3 have been selected as benchmark systems and used to build up a consistent and robust predictive scheme. Raman spectra, XRD patterns, electronic band structures, and density of states have been simulated and compared to available literature data. Disordered rock-salt type Li2TiS3 structures have been derived via a solid solution method as implemented into the CRYSTAL code. Representative structures were extensively characterized through the calculations of their electronic and vibrational properties. Furthermore, the correlation between structure and Raman fingerprint was established.
RESUMO
Organizations often face difficulties when measuring their social performance. The lack of international standards, the qualitative/quantitative nature of data, and the unavailability of primary sources all hinder social impact assessments, especially in manufacturing settings. To fill these gaps, the method proposes a simple application protocol of Social Organizational Life Cycle Assessment (SO-LCA), customized for an Italian ceramic tile manufacturer. The method leverages Industry 4.0 digital technologies to collect real-time primary and site-specific social data, making the social assessment dynamic. The managerial approach adopted for the selection of social metrics and weighting of indicators and indexes, can support the transition of the manufacturing organization into Organization 4.0. The method also provides a contribution to the operational validation of the UNEP guidelines by extending their area of application. Finally, the proposed method gives substance to social responsibility through social accounting, helping the organization to measure the correct social impact starting from the detailed data, namely the decisions made in the business and in production.â¢Social Organizational Life Cycle Assessment (SO-LCA) application protocol validated in Industry 4.0 environment.â¢Social metrics directly linked to production and business processes for the dynamic assessment of social performance.â¢Easy replicability of the method in other organizational contexts.
RESUMO
In manufacturing, Industry 4.0 operating models enable greener technologies. Thanks to digital technologies, environmental sustainability and organizational competitiveness are mutually reinforcing. The challenge for manufacturing organizations is to understand and quantify the magnitude of this synergistic action, and the holistic perspective of life cycle assessment tools may be a solution to the problem. Organizational Life Cycle Assessment (O-LCA) unlike Product Life Cycle Assessment (LCA) is still an under-researched methodology with few applications in manufacturing contexts. This paper aims to fill this gap by implementing and validating O-LCA in the case of an Italian ceramic tile manufacturer. Following the O-LCA guidelines and exploiting Industry 4.0 technologies to perform the inventory analysis, the environmental assessment was conducted in three different plants, comparing the sum of the partial impact results with the overall results scaled to the whole organization. The experimental results demonstrated the validity of the organizational approach as an appropriate methodological option to obtain relevant information on environmental performance that, being based on empirical evidence, better support decision-making processes. Furthermore, the study provides empirical evidence of how Industry 4.0 is an enabler not only for the adoption of greener technologies, but especially for facilitating the organizational environmental impact assessment that is the necessary condition in order to set up and maintain greener manufacturing contexts.
RESUMO
The relative stability ΔEof the cubicPm3¯m(C), of the two tetragonalP4mbm(T1) andI4mcm(T2), and of the orthorhombicPbnm(O) phases of KVF3has been computed both for the ferromagnetic (FM) and antiferromagnetic (AFM) solutions, by using the B3LYP full range hybrid functional and the Hartree-Fock (HF) Hamiltonian, an all-electron Gaussian type basis set and the CRYSTAL code. The stabilization of the T2 phase with respect to the C one (152µHa for B3LYP, 180µHa for HF, per 2 formula units) is due to the rotation of the VF6octahedra with respect to thecaxis, by 4.1-4.6 degrees. The O phase is slightly less stable than the T2 phase (by 6 and 20µHa for B3LYP and HF); it is, however, a stable structure as the dynamical analysis confirms. The mechanism of the stabilization of the AFM solution with respect to the FM one is discussed through the spin density maps, and is related to the key role of the exact exchange term (20% in B3LYP, 100% in HF). The G-AFM phase (the first six neighbors of the reference V ion with spin reversed) is more stable than the FM one by about 500 (HF) and 1800 (B3LYP)µHa per two formula units. A volume reduction is observed in the C to T passage, and in the FM to AFM one, both being of the order of 0.3-0.5AË3at the B3LYP level. Atomic charges, magnetic moments and bond populations, evaluated according to a Mulliken partition of the charge a spin density functions, complete the analysis. The IR and Raman spectra of the FM and AFM C, T2 and O cells are discussed; the only noticeable difference between the various space groups appears in the modes with wavenumbers lower than 100 cm-1.
RESUMO
OBJECTIVE: We aimed at identifying baseline predictive factors for emergency department (ED) readmission, with hospitalisation/death, in patients with COVID-19 previously discharged from the ED. We also developed a disease progression velocity index. DESIGN AND SETTING: Retrospective cohort study of prospectively collected data. The charts of consecutive patients with COVID-19 discharged from the Reggio Emilia (Italy) ED (2 March 2 to 31 March 2020) were retrospectively examined. Clinical, laboratory and CT findings at first ED admission were tested as predictive factors using multivariable logistic models. We divided CT extension by days from symptom onset to build a synthetic velocity index. PARTICIPANTS: 450 patients discharged from the ED with diagnosis of COVID-19. MAIN OUTCOME MEASURE: ED readmission within 14 days, followed by hospitalisation/death. RESULTS: Of the discharged patients, 84 (18.7%) were readmitted to the ED, 61 (13.6%) were hospitalised and 10 (2.2%) died. Age (OR=1.05; 95% CI 1.03 to 1.08), Charlson Comorbidity Index 3 versus 0 (OR=11.61; 95% CI 1.76 to 76.58), days from symptom onset (OR for 1-day increase=0.81; 95% CI 0.73 to 0.90) and CT extension (OR for 1% increase=1.03; 95% CI 1.01 to 1.06) were associated in a multivariable model for readmission with hospitalisation/death. A 2-day lag velocity index was a strong predictor (OR for unit increase=1.21, 95% CI 1.08 to 1.36); the model including this index resulted in less information loss. CONCLUSIONS: A velocity index combining CT extension and days from symptom onset predicts disease progression in patients with COVID-19. For example, a 20% CT extension 3 days after symptom onset has the same risk as does 50% after 10 days.
Assuntos
COVID-19 , Readmissão do Paciente , COVID-19/epidemiologia , Estudos de Coortes , Progressão da Doença , Serviço Hospitalar de Emergência , Humanos , Alta do Paciente , Estudos Retrospectivos , Fatores de RiscoRESUMO
The electrification of passenger cars is one of the most effective approaches to reduce noxious emissions in urban areas and, if the electricity is produced using renewable sources, to mitigate the global warming. This profound change of paradigm in the transport sector requires the use of Li-ion battery packages as energy storage systems to substitute conventional fossil fuels. An automotive battery package is a complex system that has to respect several constraints: high energy and power densities, long calendar and cycle lives, electrical and thermal safety, crash-worthiness, and recyclability. To comply with all these requirements, battery systems integrate a battery management system (BMS) connected to an complex network of electric and thermal sensors. On the other hand, since Li-ion cells can suffer from degradation phenomena with consequent generation of gaseous emissions or determine dimensional changes of the cell packaging, chemical and mechanical sensors should be integrated in modern automotive battery packages to guarantee the safe operation of the system. Mechanical and chemical sensors for automotive batteries require further developments to reach the requested robustness and reliability; in this review, an overview of the current state of art on such sensors will be proposed.
RESUMO
To go deep into the origin of MgCl2 supported Ziegler-Natta catalysis we need to fully understand the structure and properties of precatalytic nanoclusters MgCl2/TiCl4 in presence of Lewis bases as internal donors (ID). In this work MgCl2/TiCl4 nanoplatelets derived by machine learning and DFT calculations have been used to model the interaction with ethyl-benzoate EB as ID, with available exposed sites of binary TixCly/MgCl2 systems. The influence of vicinal Ti2Cl8 and coadsorbed TiCl4 on energetic, structural and spectroscopic behaviour of EB has been considered. The adsorption of homogeneous-like TiCl4EB and TiCl4(EB)2 at the various surface sites have been also simulated. B3LYP-D2 and M06 functionals combined with TZVP quality basis set have been adopted for calculations. The adducts have been characterized by computing IR and Raman spectra that have been found to provide specific fingerprints useful to identify surface species; IR spectra have been successfully compared to available experimental data.
RESUMO
The NV-N+ charged pair in diamond has been investigated by using a Gaussian-type basis set, the B3LYP functional, the supercell scheme and the CRYSTAL code. It turns out that: (i) when the distance between the two defects is larger than 6-7 Å, the properties of the double defect are the superposition of the properties of the individual defects. (ii) The energy required for the reaction NV0 + Nsâ NV- + N+ is roughly -1.3 eV at about 12 Å, irrespective of the basis set and functional adopted, and remains negative at any larger distance. (iii) These results support the observation of a charge transfer mechanism through a Nsâ NV0 donation occurring in the ground state, through a tunnelling process, without irradiation. (iv) The IR spectrum of the two subunits is characterized by specific peaks, that might be used as fingerprints. (v) Calculation of electrostatic interaction permitted an estimate of the effective charge of the defects.