Oral rehabilitation of a saxophone player with orofacial pain: a case report.

This paper presents a clinical case study investigating the pattern of a saxophonist's embouchure as a possible origin of orofacial pain. The rehabilitation addressed the dental occlusion and a fracture in a metal ceramic bridge. To evaluate the undesirable loads on the upper teeth, two piezoresistive sensors were placed between the central incisors and the mouthpiece during the embouchure. A newly fixed metal ceramic prosthesis was placed from teeth 13 to 25, and two implants were placed in the premolar zone corresponding to teeth 14 and 15. After the oral rehabilitation, the embouchure force measurements showed that higher stability was promoted by the newly fixed metal-ceramic prosthesis. The musician executed a more symmetric loading of the central incisors (teeth 11 and 21). The functional demands of the saxophone player and consequent application of excessive pressure can significantly influence and modify the metal-ceramic position on the anterior zone teeth 21/22. The contribution of engineering (i.e., monitoring the applied forces on the musician's dental structures) was therefore crucial for the correct assessment and design of the treatment plan.

The relation between mandibular symphysis and the Angle class in orthodontic treatment.

Objectives: Facial perception depends on the different components of the face. The chin is a striking anatomical structure in the individual's identity and mandibular symphysis (MS) shape influences the adjacent soft tissue, determining facial harmony. In lateral cephalometry, the MS corresponds to the image of the mandibular body in its anterior curvature. It shape, inclination and thickness provide valuable information for orthodontic diagnosis and prognosis. Since facial features are associated with malocclusions, the present investigation aims to relate the height, thickness and inclination of the MS using Angle's Class. Methods: 495 lateral incidence cephalograms of an orthodontic population were analyzed using a previously developed and tested software. The sample was randomly selected and the height, thickness and inclination of the MS were measured. The values were statistically analyzed (p ≤ 0.05). Results: The distribution according to Angle's Class was 48.9% for Class I, 34.7% for Class II Division 1, 7.4% for Class II Division 2 and 8.9% for Class III. The MS height did not't show significant differences between the three dental classes. The MS thickness was significantly increased in Class II Division 2 and Class I subjects (p = 0,037). The MS inclination was significantly less in Class III subjects when compared to Class I and Class II Division 1 (p ≤ 0.001). Conclusions: The MS presented variations, which may be associated with a natural compensation against malocclusion, influencing the position of the teeth and their relationship with the other dento-craniofacial structures and with consequences on the facial harmony.

Tooth Position in Wind Instrument Players: Dentofacial Cephalometric Analysis.

BACKGROUND: Specific dentofacial characteristics in wind instrumentalists should be taken in consideration when analyzing physiological and anatomical issues regarding the musician's embouchure, posture, and biomechanics during musical performance. OBJECTIVES: To compare tooth cephalometric characteristics between wind instrument players and string players (overjet, overbite, lower facial height, facial convexity, lower incisor inclination, and interincisal angle). METHODS: In total, 48 wind instrumentalists (67%) and 24 string instrumentalists (33%). These musicians performed lateral tele-radiography and the correspondent linear and angular measurements of the dentofacial cephalometric analysis. Statistical comparison of wind and string instrumentalists was made by using an independent t-test. RESULTS: Small variations on the analyzed parameters were found between the wind and string instrument groups. Based on the cephalometric analysis the variable interincisal angle was statistically significant (p < 0.05), when comparing the wind and string instrument group. CONCLUSIONS: Knowledge of the overjet and overbite value permits a substantial analysis on the tooth position of wind instrument players, where both of these parameters are increased and greater than the norm value. The cephalometry was an added value on the interpretation of possible factors that lead to the position of the central incisors of wind instruments. Till some extent in this group of musicians the applied forces during the embouchure mechanism on the anterior teeth and the existing perioral forces promote an equilibrium on the vector of forces. This study findings demonstrate that when evaluating the two samples, wind and string instruments there are different dentofacial configurations, however the only statistically significant differences that were found are related to the interincisal angle (p < 0.05).

Orofacial Trauma on the Anterior Zone of a Trumpet's Player Maxilla: Concept of the Oral Rehabilitation-A Case Report.

BACKGROUND: The occurrence of an orofacial trauma can originate health, social, economic and professional problems. A 13-year boy suffered the avulsion of tooth 11 and 21, lost at the scenario. METHODS: Three intraoral appliances were manufactured: A Hawley appliance with a central expansion screw and two central incisors (1), trumpet edentulous anterior tooth appliance (2) and a customized splint (3) were designed as part of the rehabilitation procedure. Objectively assessing the sound quality of the trumpet player with these new devices in terms of its spectral, temporal, and spectro-temporal audio properties. A linear frequency response microphone was adopted for precision measurement of pitch, loudness, and timbre descriptors. RESULTS: Pitch deviations may result from the different intra-oral appliances due to the alteration of the mouth cavity, respectively, the area occupied and modification/interaction with the anatomy. This investigation supports the findings that the intra-oral appliance which occupies less volume is the best solution in terms of sound quality. CONCLUSIONS: Young wind instrumentalists should have dental impressions of their teeth made, so their dentist has the most reliable anatomy of the natural teeth in case of an orofacial trauma. Likewise, the registration of their sound quality should be done regularly to have standard parameters for comparison.

Craniofacial morphology of wind and string instrument players: a cephalometric study.

BACKGROUND: Playing an instrument may promote a parafunctional behavior within the cranio-cervical-mandibular-complex with unknown repercussions. The aim of this study was to find any association between the dental inter-arch relationship and the practice of a wind or string instrument. METHODS: A sample of 77 musicians, divided in two groups of wind (n = 50) and string instrumentalists (n = 27), had a lateral cephalogram taken to compare six cephalometric parameters following the Rickett's analysis (maxilla position, mandible position, facial type, skeletal class, upper incisor and lower incisor inclination). The Fisher test was performed to compare, with a 95% statistical confidence, if both groups have similar frequency distributions for each cephalometric parameter. RESULTS: No statistical differences were found for the maxilla position, mandible position, facial type, skeletal class and upper incisor inclination. Statistical differences were found for the lower incisor inclination (p = 0.011). CONCLUSIONS: Playing a wind instrument showed to have little orthopaedic influence at the craniofacial morphology, on contrary it may influence the lower incisor inclination with its osseous base.

Infrared thermography of the crânio-cervico-mandibular complex in wind and string instrumentalists.

PURPOSE: Musculoskeletal disorders can be common in wind and string instrumentalists. The musical gesture technique associated to musical performance can promote an asymmetrical isometric contraction with the hyperactivity of specific muscular groups and the overload of articular surfaces which can cause discomfort or pain. The aim of this investigation was to assess specific anatomical regions of interest within the cranio-cervico-mandibular complex in order to determine and evaluate the presence of muscular hyperactivity associated to musical performance. METHODS: An infrared imaging camera, FLIR®, was used to record the regions of interest in wind (n = 48) and string instrumentalists (n = 29). Bilateral temperature differences were considered as thermal asymmetries with a conventional threshold of 0.3 ºC to distinguish pathological from healthy states. The regions of interest (ROI) were the anterior triangle of the neck, the sternocleidomastoid and trapezius muscles regarding the postural and stabilizing muscles of the head and neck. On the orofacial region, the anatomical sites were the anterior temporal muscle, the masseter muscle and the temporomandibular joint. A Pearson chi-square test was performed to compare the assessed areas. RESULTS: Between 30-37% of all participants showed ROI in an asymmetric pattern. The most affected sites were the temporal muscle and the TMJ for both groups. The anterior triangle of the neck showed statistical differences (p = 0.044) between string and wind instrumentalists, while the temporal (p = 0.034) and trapezius muscle (p = 0.028) when comparing large and small mouthpieces of brass instruments. Although female participants showed a higher prevalence of asymmetrical patterns regarding the ROI, no statistical differences were found between genders. CONCLUSIONS: Infrared thermography exhibited significant differences between wind and string instruments within the CCMC. Regarding the issue of occupational health in performing arts, it is an advantage being able to quantify asymmetrical patterns sites of the CCMC to understand the underlying physiological responses to repetitive movements, overloading and muscular hyperactivity that occur during musical performance.

Wind Instrumentalists and Temporomandibular Disorder: From Diagnosis to Treatment.

INTRODUCTION: Temporomandibular disorders (TMD) involve the presence of pain or dysfunction on certain areas of the Cranio-Cervico-Mandibular Complex (CCMC), such as the masticatory muscles, the temporomandibular joint (TMJ) and associated structures like the postural muscles of the cervical region, can be considered as a sub-group of musculoskeletal disorders. Wind instrument players, as a consequence of their musical performance and its relation with the CCMC, can develop a TMD associated to muscle hyperactivity of certain elevator muscles, or even an increase of the intra-articular pressure in the functioning of the TMJ throughout musical activity. AIM: The objective of this paper is to describe the necessary and elementary steps in the diagnoses and treatment of a wind instrumentalist with a temporomandibular disorder, with the introduction of infrared thermography during this procedure. This case study also has the purpose of presenting the usefulness of piezoresistive sensors in the analysis of the clarinettists' embouchure. METHODOLOGY: A Caucasian, 30-year-old female clarinettist was assessed through a clinical examination following the Diagnostic Criteria for TMD (RDC/TMD), as a complementary tool of diagnosis, a thermal imaging infrared camera, Flir E60 (Wilsonville, OR, USA), was used in order to analyse the above referred articular and muscular regions. The complementary examination protocol implemented with this clarinet player also involved the analyses of the embouchure with the support of piezoresistive sensors. RESULTS: The clinical outcomes resulting from this work were based on the RDC/TMD diagnoses indicated that the clarinet player had an internal derangement on both TMJ, with an osteoarthritis on the left TMJ and an anterior disc displacement with reduction on the right TMJ. The infrared thermograms that were analysed, verified the existence of a temperature differential of the anterior temporal muscle (0.1 °C), the TMJ (0.1 °C) and the masseter muscle (0.7 °C), and after the occlusal splint therapy the asymmetry related to the master muscle reduced to 0.3 °C. The high pitches can reach values of 379 g of force induced to the tooth 21 comparing to the 88 g of force applied on tooth 11. The embouchure force measurements consistently presented greater forces during the higher notes, followed by the medium notes and finally the low notes and this happened with higher pressures being transmitted always to tooth 21. CONCLUSION: Performing arts medicine should understand the major importance of the dentistry field in the daily life of a professional musician, and the significance of implementing routine screening procedures of dental examinations, with infrared thermograms examination of distinct areas of the CCMC, as well as the use of sensors on the analyses of an eventual asymmetrical embouchure. Employing these techniques in dentistry will create the chance of preventing the overuse of some anatomical structures, with an early diagnosis and the correct monitoring of these areas.

A Prosthodontic Treatment Plan for a Saxophone Player: A Conceptual Approach.

INTRODUCTION: A wind instrumentalist was diagnosed with a periapical lesion on tooth 21. The prosthetic rehabilitation options were considered with respect to the embouchure mechanism of the saxophonist. The underlying mechanism associated with the embouchure of the saxophone player was observed in this particular case in order to understand if asymmetrical forces were transmitted to the upper central incisors. Periapical lesions can be harmful to the oral health of musicians. The treatment options thus have to be taken into consideration with special focus on the need for oral rehabilitation on the anterior maxilla. MATERIAL AND METHODS: The patient underwent a radiographic examination with a panoramic X-ray. Subsequently, two piezoresistive sensors (FlexiForce™) were placed on the upper surface of the mouthpiece in order to quantify the pressure applied to the central incisors during the embouchure. In order to understand the values involved during this procedure, the saxophone player was required to play three different notes at different pitches: high, medium, and low. This procedure was repeated three times for each pitch in order to obtain a medium value for each note. Signal acquisition was obtained within software developed for this purpose, with the voltage output observed in LabView 2011®. RESULTS: The panoramic X-ray showed a periapical lesion with the characteristics of a radicular cyst on tooth 21. The FlexiForce™ piezoresistive sensors allowed us to find that greater force (kg) was being applied to tooth 11 in comparison to tooth 21 during the embouchure mechanism. CONCLUSIONS: The sensors used in this research are acceptable for identifying the tooth where the greatest pressure is applied during the mouthpiece stabilization. In the case of executing an oral rehabilitation procedure for wind instrumentalists, a clinical examination can be complemented with the aid of bioengineering and the inherent development of sensor technology in order to better understand the embouchure mechanism. Likewise, the prosthetic rehabilitation should be taken into consideration in order to provide minimal changes to the musician's performance.

Effect of activation and preactivation on the mechanical behavior and neutral position of stainless steel and beta-titanium T-loops.

OBJECTIVE: To quantify, for each activation, the effect of preactivations of differing distribution and intensity on the neutral position of T-loops (7-mm height), specifically the horizontal force, moment to force (M/F) ratio, and load to deflection ratio. METHODS: A total 100 loops measuring 0.017 × 0.025 inches in cross-section were divided into two groups (n = 50 each) according to composition, either stainless steel or beta-titanium. The two groups were further divided into five subgroups, 10 loops each, corresponding to the five preactivations tested: preactivations with occlusal distribution (0°, 20°, and 40°), gingival distribution (20°), and occlusal-gingival distribution (40°). The loops were subjected to a total activation of 6-mm with 0.5-mm iterations. Statistical analysis was performed using comprised ANOVA and Bonferoni multiple comparison tests, with a significance level of 5%. RESULTS: The location and intensity of preactivation influenced the force intensity. For the M/F ratio, the highest value achieved without preactivation was lower than the height of the loop. Without preactivation, the M/F ratio increased with activation, while the opposite effect was observed with preactivation. The increase in the M/F ratio was greater when the preactivation distribution was partially or fully gingival. CONCLUSIONS: Depending on the preactivation distribution, displacement of uprights is higher or lower than the activation, which is a factor to consider in clinical practice.

Influence of lateral cephalometric radiography in orthodontic diagnosis and treatment planning.

OBJECTIVE: To evaluate the impact of additional lateral cephalometric radiography in orthodontic diagnosis and treatment planning. MATERIALS AND METHODS: Forty-three patients seeking orthodontic treatment, and for whom pretreatment diagnostic records were available, were randomly selected. Ten qualified orthodontists were involved in this study. The patients' records included three photographs of the angle trimmed dental casts, digital lateral cephalometric and panoramic radiographs, and standard clinical photographs comprising seven intra- and four extraoral pictures. Records were evaluated in two sessions. At the first session, orthodontists evaluated records without lateral cephalometric radiography (LCR). In the second session, the same information was presented, but with LCR. Between the two sessions the order in which the cases were presented was altered to avoid bias. RESULTS: The percentage of agreement between sessions was lower for diagnosis than for treatment planning. Concerning skeletal classification, the least experienced orthodontist was the least consistent (28%), while the more experienced orthodontist was the more reliable (67%). In terms of treatment modalities, in general there was an agreement of 64%. The most frequent modifications in treatment modalities were seen in Class II malocclusion patients. CONCLUSIONS: The results of our study suggest that the majority of Portuguese orthodontists judge that LCR is important to producing a treatment plan. Despite that, it does not seem to have an influence on orthodontic treatment planning.

Comparison of condylar displacement between three biotypological facial groups by using mounted models and a mandibular position indicator.

OBJECTIVE: Facial-type-associated variations in diagnostic features have several implications in orthodontics. For example, in hyperdivergent craniofacial types, growth imbalances are compensated by displacement of the condyle. When diagnosis and treatment planning involves centric relation (CR), detailed knowledge of the condylar position is desirable. The present study aimed to measure condylar displacement (CD) between CR and maximum intercuspation in three facial types of an asymptomatic orthodontic population. METHODS: The study was conducted in 108 patients classified into three groups of 36 individuals each (27 women and 9 men; mean age, 20.5 years), based on the following facial patterns: hyperdivergent, hypodivergent, and intermediate. To quantify CD along the horizontal and vertical axes, the condylar position was analyzed using mounted casts on a semi-adjustable articulator and a mandibular position indicator. The Student t-test was used to compare CD between the groups. RESULTS: Vertical displacement was found to be significantly different between the hyperdivergent and hypodivergent groups (p < 0.0002) and between the hyperdivergent and intermediate groups (p < 0.0006). The differences in horizontal displacement were not significant between the groups. In each group, vertical CD was more evident than horizontal displacement was. CONCLUSIONS: All facial types, especially the hyperdivergent type, carried a significantly high risk of CD. Therefore, the possibility of CD should be carefully evaluated and considered in the assessment of all orthodontic cases in order to accurately assess jaw relationships and avoid possible misdiagnosis.

Different manifestations of class II division 2 incisor retroclination and their association with dental anomalies.

OBJECTIVE: To investigate whether there is an association between dental developmental anomalies (DDAs) and different manifestations of class II division 2 (CII/2) malocclusion incisor retroclination. DESIGN: Retrospective comparative study. SETTING: Private orthodontic practice in the regions of Lisbon and Porto, Portugal. SUBJECTS AND METHODS: The sample comprised 115 CII/2 malocclusions distributed into two groups on the basis of incisor retroclination: Group I composed of 48 CII/2 with retroclination exclusively of both maxillary central incisors; Group II composed of 67 CII/2 with retroclination of all four maxillary incisors. Using the initial orthodontic records, it was determined for each patient the presence of the following DDAs: tooth impaction, tooth agenesis, maxillary lateral incisor microdontia, tooth transpositions and supernumerary teeth. RESULTS: Fifty-five per cent of patients were diagnosed with at least one of the DDAs studied. In the total sample the prevalence rates were: 20.0% of palatal maxillary canine impaction, 27.4% of third molar agenesis, and 15.7% of maxillary lateral incisor microdontia. No patient exhibited any transposition or supernumerary teeth. The distribution of the DDAs studied by groups revealed a strong association of palatal canine impaction, tooth agenesis and maxillary lateral incisor microdontia with Group II but not with Group I. CONCLUSION: The association of DDAs with CII/2 malocclusion is not common to all types of maxillary incisor retroclination, suggesting different etiologic factors among the different manifestations of CII/2 incisor retroclination.

The prevalence of anterior open bite in Portuguese children during deciduous and mixed dentition--correlations for a prevention strategy.

INTRODUCTION: Anterior open bite (AOB) is a vertical malocclusion that requires thorough diagnosis to ensure long-term stability. The aim of this study was to determine the prevalence of AOB in Portuguese children during deciduous and mixed dentition in order to assess the need for orthodontic treatment and to determine its relation to other associated features. MATERIAL AND METHODS: A group of 1264 children aged between 3 and 12 from Porto in Portugal were observed. The statistical methodology included the independent Chi(2) test, Fisher's exact test and binary logistic regression. RESULTS: The prevalence of AOB was 16.9% with 95% CI (11.9%, 24.5%) for primary dentition and 11.3% with 95% CI (8.4%, 15.1%) for mixed dentition. Pacifier sucking, thumb sucking, tongue thrust and oral breathing are major risk factors for AOB in primary dentition, ranked in descending order. In mixed dentition, the factors are ranked as follows: pacifier sucking, lip sucking, tongue thrust and oral breathing. CONCLUSION: Due to the close connection between the prevalence of AOB and dysfunctional problems, prevention strategies should be integrated into a national public health program. The habits mentioned above should be eliminated early by using the appropriate protocols in order to reduce the risk factors of malocclusion.

Disostose cleidocraniana - relato de um caso clínico com abordagem multidisciplinar / Cleidocranial dysostosis - case report of a multidisciplinary approach

A disostose cleidocraniana é uma síndrome genética rara, autossómica dominante. Neste caso particular, os muitos desafios dos tratamentos foram resolvidos por uma equipe odontológica, cujo traccionamento ortodôntico de dentes inclusos associados com a cirurgia ortognática bimaxilar foi o principal foco. O objectivo deste tratamento ortodôntico-cirúrgico foi restaurar a oclusão funcional e melhorar a estética facial, aproveitando a vantagem de todos os dentes impactados que caracterizam esta síndrome.

Cleidocranial dysostosis (CCD) is a rare genetic syndrome, autosomal dominant. In this paper a patient with cleidocranial dysostosis was treated under a multidisciplinary basis. Many treatment challenges were solved by a dental team, in which the orthodontic traction of unerupted teeth associated with bimaxilar surgery had the main focus. The aim of this surgical-orthodontic treatment was to restore the functional occlusion and to improve the facial aesthetics, taking advantage of all the impacted teeth which characterize this syndrome.