RESUMO
Acrylic bone cement (BC) is used in orthopaedic surgery to anchor cemented prostheses to bone. Association of antioxidant molecules to BC may suppress reactive species injury which contributes to implant failure. Tocopherol acetate (ATA)-loaded polymethylmethacrylate (PMMA) particles (ATA(PMMA)) were prepared by single emulsion solvent evaporation technique and were incorporated into BC. An encapsulation efficiency of 84% (w/w) was obtained and drug release studies showed distinct ATA release profiles and mechanisms before and after particle incorporation into BC. Experimental data, analysed using first-order, Higuchi and Korsmeyer-Peppas models revealed that ATA was released from particles by a Fickian diffusion mechanism while a non-Fickian transport was observed upon particle incorporation in BC. There were no changes in the mechanical properties of BC specimens containing ATA(PMMA) particles, in contrast to what was observed when ATA was loaded directly into BC. Overall, ATA(PMMA) particles are potential carriers for the incorporation of an antioxidant drug into BC.
Assuntos
Antioxidantes/administração & dosagem , Composição de Medicamentos , Polimetil Metacrilato/química , Tocoferóis/administração & dosagem , Composição de Medicamentos/métodos , Emulsões/química , Dureza , Tamanho da PartículaRESUMO
The number of biotechnology-based pharmaceuticals in the late-stage pipeline has been increasing more than ever. As a result, there is an enhanced demand for more efficient and cost-effective processes. During the last years, the upstream technology for the production of biopharmaceuticals has been considerably improved. Continuous discoveries in molecular biology and genetics, combined with new advances in media and feed development, have significantly increased the production titres. In order to keep up this gain, it is now essential to design new, as well as to improve the existing downstream processes that remain an unresolved bottleneck. This review evaluates several alternatives to the currently established platforms for the downstream processing biopharmaceuticals, with main focus on aqueous two-phase extraction.
Assuntos
Biofarmácia/métodos , Fracionamento Químico/métodos , Indústria Farmacêutica/métodos , Proteínas/isolamento & purificação , Anticorpos Monoclonais/biossíntese , Anticorpos Monoclonais/isolamento & purificação , Cromatografia Líquida , Biossíntese de Proteínas , Água/químicaRESUMO
Single-stage and multi-stage strategies have been evaluated and compared for the purification of human antibodies using liquid-liquid extraction in aqueous two-phase systems (ATPSs) composed of polyethylene glycol 3350 (PEG 3350), dextran, and triethylene glycol diglutaric acid (TEG-COOH). The performance of single-stage extraction systems was firstly investigated by studying the effect of pH, TEG-COOH concentration and volume ratio on the partitioning of the different components of a Chinese hamster ovary (CHO) cells supernatant. It was observed that lower pH values and high TEG-COOH concentrations favoured the selective extraction of human immunoglobulin G (IgG) to the PEG-rich phase. Higher recovery yields, purities and percentage of contaminants removal were always achieved in the presence of the ligand, TEG-COOH. The extraction of IgG could be enhanced using higher volume ratios, however with a significant decrease in both purity and percentage of contaminants removal. The best single-stage extraction conditions were achieved for an ATPS containing 1.3% (w/w) TEG-COOH with a volume ratio of 2.2, which allowed the recovery of 96% of IgG in the PEG-rich phase with a final IgG concentration of 0.21mg/mL, a protein purity of 87% and a total purity of 43%. In order to enhance simultaneously both recovery yield and purity, a four stage cross-current operation was simulated and the corresponding liquid-liquid equilibrium (LLE) data determined. A predicted optimised scheme of a counter-current multi-stage aqueous two-phase extraction was hence described. IgG can be purified in the PEG-rich top phase with a final recovery yield of 95%, a final concentration of 1.04mg/mL and a protein purity of 93%, if a PEG/dextran ATPS containing 1.3% (w/w) TEG-COOH, 5 stages and volume ratio of 0.4 are used. Moreover, according to the LLE data of all CHO cells supernatant components, it was possible to observe that most of the cells supernatant contaminants can be removed during this extraction step leading to a final total purity of about 85%.
Assuntos
Fracionamento Químico/métodos , Imunoglobulina G/isolamento & purificação , Água/química , Animais , Células CHO , Cromatografia em Gel , Cricetinae , Cricetulus , Glutaratos/química , Humanos , Concentração de Íons de Hidrogênio , Polietilenoglicóis/química , Frações Subcelulares/químicaRESUMO
We have evaluated a process incorporating aqueous two-phase extraction, hydrophobic interaction chromatography (HIC) and size-exclusion chromatography (SEC) for the purification of human immunoglobulin G (IgG) from a Chinese hamster ovary (CHO) cell supernatant. These unit operations were chosen not only for allowing the removal of target impurities but also for facilitating the integration of different process units without the need for any conditioning step. Extraction in aqueous two-phase systems (ATPSs), composed of polyethylene glycol (PEG) and sodium citrate, allowed the concentration of the antibodies in the citrate-rich phase and the removal of the most hydrophobic compounds in the PEG-rich phase. An ATPS composed of 10% (w/w) PEG 3350 and 12% (w/w) citrate, at pH 6, allowed the recovery of IgG with a 97% yield, 41% HPLC purity and 72% protein purity. This bottom phase was then directly loaded on a phenyl-Sepharose HIC column. This intermediate purification step allowed the capture of the antibodies using a citrate mobile phase with 99% of the antibody recovered in the elution fractions, with 86% HPLC purity and 91% protein purity. Finally, SEC allowed the final polishing by removing IgG aggregates. HIC-eluted fractions were directly injected in a Superose 6 size-exclusion column affording a 100% pure IgG solution with 90% yield.
Assuntos
Anticorpos/isolamento & purificação , Cromatografia em Gel/métodos , Cromatografia/métodos , Animais , Células CHO , Fracionamento Químico , Cromatografia Líquida/métodos , Cricetinae , Cricetulus , Humanos , Interações Hidrofóbicas e Hidrofílicas , Imunoglobulina G/isolamento & purificaçãoRESUMO
The partitioning of human immunoglobulin (IgG) in a polymer-polymer and polymer-salt aqueous two-phase system (ATPS) in the presence of several functionalised polyethylene glycols (PEGs) was studied. As a first approach, the partition studies were performed with pure IgG using systems in which the target protein remained in the bottom phase when the non-functionalised systems were tested. The effect of increasing functionalised PEG concentration and the type of ligand were studied. Afterwards, selectivity studies were performed with the most successful ligands first by using systems containing pure proteins and an artificial mixture of proteins and, subsequently, with systems containing a Chinese hamster ovary (CHO) cells supernatant. The PEG/phosphate ATPS was not suitable for the affinity partitioning of IgG. In the PEG/dextran ATPS, the diglutaric acid functionalised PEGs (PEG-COOH) displayed great affinity to IgG, and all IgG could be recovered in the top phase when 20% (w/w) of PEG 150-COOH and 40% (w/w) PEG 3350-COOH were used. The selectivity of these functionalised PEGs was evaluated using an artificial mixture of proteins, and PEG 3350-COOH did not show affinity to IgG in the presence of typical serum proteins such as human serum albumin and myoglobin, while in systems with PEG 150-COOH, IgG could be recovered with a yield of 91%. The best purification of IgG from the CHO cells supernatant was then achieved in a PEG/dextran ATPS in the presence of PEG 150-COOH with a recovery yield of 93%, a purification factor of 1.9 and a selectivity to IgG of 11. When this functionalised PEG was added to the ATPS, a 60-fold increase in selectivity was observed when compared to the non-functionalised systems.