Modeling stability post zygomatic fracture reconstruction.

Zygomaticomaxillary complex (ZMC) fracture repair is one of the most common surgical procedures performed in craniomaxillofacial trauma management. Miniplates and screws are used to stabilize the fractured bone using small local incisions, however, these procedures are not infrequently associated with hardware-related post-operative complications. The amount of fixation hardware utilized varies depending on the fracture pattern and surgical judgment, with three-point fixation being the conventionally accepted treatment. However, limited experimental testing and clinical studies have suggested that ZMC stabilization may be achieved with less than three-point fixation. In this study, we utilized a previously developed finite element modeling approach that allows for detailed bone and muscle representation to study the mechanical behavior of the fractured craniomaxillofacial skeleton (CMFS) under one, two, or three-point fixation of the ZMC. Results suggest that using a miniplate along the infraorbital rim in three-point fixation increases the amount of strain and load transfer to this region, rather than offloading the bone. Two-point (zygomaticomaxillary and zygomaticofrontal) fixation yielded strain patterns most similar to the intact CMFS. One-point (zygomaticofrontal) fixation resulted in higher tensile and compressive strains in the zygomaticofrontal region and the zygomatic arch, along with a higher tensile strain on the zygomatic body. These modeling results provide biomechanical evidence for the concept of over-engineering in the stabilization of facial fractures. Furthermore, they support previous suggestions that less than three-point fixation of ZMC fractures may be adequate to achieve uneventful healing.

BoneTape: A novel osteosynthetic device for the stabilization of zygomatic fractures.

BACKGROUND: The study aims to assess the safety and effectiveness of BoneTape™, a new resorbable bone fixation device, using a zygomatic fracture model in rabbits. METHODS: The study followed BoneTape™ samples and control (sham) groups over 2-, 6-, and 12-week periods post-zygomaticomaxillary (ZM) osteotomy and zygomaticofrontal (ZF) disarticulation. The osteotomized segments were analyzed for bone healing, inflammatory response, and tissue healing. µCT imaging and histological analysis were used to examine the axial alignment, offset, and quality of new bone formation. RESULTS: BoneTape™ samples demonstrated enhanced maintenance of the initial intraoperative positioning, reduced axial offset, and better alignment when compared with the control group, enabling stable bone healing under physiological loading conditions. Complete union was observed at 12-weeks in both groups. The BoneTape™ group experienced minimal immune and tissue reactions, classically associated with wound healing, and showed an increased number of giant cells at 6 and 12-weeks. CONCLUSION: BoneTape™ represents a promising advancement in osteosynthesis, demonstrating efficacy in maintaining stable zygomatic reconstruction and eliciting minimal immune response in a rabbit model. This study introduces BoneTape™ as a disruptive solution specifically designed for clinical application in cranio-maxillofacial fracture fixation, with the potential to eliminate the use of over-engineered solutions while offering benefits such as ease of application and fewer biologically disruptive steps.

Artificial Intelligence-Based Modeling Can Predict Face Shape Based on Underlying Craniomaxillofacial Bone.

Reconstructing facial deformities is often challenging due to the complex 3-dimensional (3D) anatomy of the craniomaxillofacial skeleton and overlying soft tissue structures. Bilateral injuries cannot benefit from mirroring techniques and as such preinjury information (eg, 2D pictures or 3D imaging) may be utilized to determine or estimate the desired 3D face shape. When patient-specific information is not available, other options such as statistical shape models may be employed; however, these models require registration to a consistent orientation which may be challenging. Artificial intelligence (AI) has been used to identify facial features and generate highly realistic simulated faces. As such, it was hypothesized that AI can be used to predict 3D face shape by learning its relationship with the underlying bone surface anatomy in a subject-specific manner. An automated image processing and AI modeling workflow using a modified 3D UNet was generated to estimate 3D face shape using the underlying bone geometry and additional metadata (eg, body mass index and age) obtained from 5 publicly available computed tomography imaging datasets. Visually, the trained models provided a reasonable prediction of the contour and geometry of the facial tissues. The pipeline achieved a validation dice=0.89 when trained on the combined 5 datasets, with the highest dice=0.925 achieved with the single HNSCC dataset. Estimated predefect facial geometry may ultimately be used to aid preoperative craniomaxillofacial surgical planning, providing geometries for intraoperative templates, guides, navigation, molds, and forming tools. Automated face shape prediction may additionally be useful in forensic studies to aid in the identification of unknown skull remains.

Is three-point fixation needed to mechanically stabilize zygomaticomaxillary complex fractures?

Fixation is critical in zygomaticomaxillary complex (ZMC) fractures to avoid malunion; however, controversy exists as to how much hardware is required to achieve adequate stability. Current fixation regimens may not represent the minimum stabilization needed for uneventful healing. Craniomaxillofacial (CMF) computational models have shown limited load transmission through the infraorbital rim (IOR), and a previous experimental study of ZMC fractures has suggested that IOR plating does not alter CMF bone strain patterns. This study aimed to measure the impact of stabilization on fracture site displacement under muscle loading, testing the hypothesis that three-point fixation is not critical for ZMC fracture stability. Four ZMC complex fractures were simulated on two cadaveric samples and stabilized with three-point plating. Displacements simulating mouth openings of 20 mm and 30 mm were applied to the mandible using a custom apparatus. Fracture gap displacement under load was measured at multiple points along each fracture line, and bone strain was captured using a combination of uniaxial and rosette gauges. Data capture was repeated with the IOR plate removed (two-point fixation) and with the zygomaticomaxillary plate removed (one-point fixation). Fracture displacement under muscle loading was consistent, with gaps of less than 1 mm in 95% of cases (range 0.05-1.44 mm), reflecting clinical stability. Large variabilities were observed in the strain measurements, which may reflect the complexity of CMFS load patterns and the sensitivity of strain values to gauge placement. This study supports the concept of hardware reduction, suggesting that two-point (or even one-point) fixation may provide sufficient stability for a ZMC fracture under applied muscle loading.

Are We Overoperating on Isolated Orbital Floor Fractures?

BACKGROUND: Orbital floor fracture defect size and inferior rectus (IR) rounding index are currently accepted indications for surgery to prevent late enophthalmos. The authors analyzed the positive predictive value (PPV) of these indications. METHODS: Twenty-eight patients with orbital floor fractures presenting without enophthalmos underwent Hertel exophthalmometry at presentation and at weeks 1, 2, 3, 6, 13, 26, and 52 or more after injury. Orbital defect size and IR rounding index were measured from computed tomographic scans, and PPVs of defects of 1.5 to 2 cm 2 or larger and IR rounding index of 1 or higher for enophthalmos (≥2 mm) were calculated. RESULTS: Nineteen patients had isolated orbital floor fractures (group A), three had noncontinuous orbital floor and medial wall fractures (group B), and six had continuous orbital floor with medial wall fractures (group C). Mean follow-up time was 440 days. Of all patients, 20 had a defect size of 1.5 cm 2 or larger, 12 had a defect of 2.0 cm 2 or larger, and 13 had an IR rounding index of 1 or higher. Of the 28 patients, only one from group A and two from group C developed enophthalmos of 2 mm only. The PPVs of orbital floor defect size of 1.5 cm 2 or larger and 2 cm 2 or larger (groups A and B only) for late enophthalmos were 6.7% and 0%, respectively. The PPV of IR rounding index of 1 or higher for late enophthalmos (all groups) was 0%. CONCLUSIONS: For patients with orbital floor fractures presenting without enophthalmos, defects of 1.5 cm 2 or larger and 2 cm 2 or larger, and IR rounding index of 1 or higher, are weakly predictive of late enophthalmos. Furthermore, patients who do not develop enophthalmos within 3 weeks of injury are unlikely to develop significant (>2 mm) late enophthalmos. CLINICAL QUESTION/LEVEL OF EVIDENCE: Risk, III.

Best Practice Guidelines for the Management of Acute Craniomaxillofacial Trauma During the COVID-19 Pandemic.

Coronavirus disease 2019 (COVID-19) is an infectious disease that is caused by severe respiratory syndrome coronavirus 2. Although elective surgical procedures are being cancelled in many parts of the world during the COVID-19 pandemic, acute craniomaxillofacial (CMF) trauma will continue to occur and will need to be appropriately managed. Surgical procedures involving the nasal, oral, or pharyngeal mucosa carry a high risk of transmission due to aerosolization of the virus which is known to be in high concentration in these areas. Intraoperative exposure to high viral loads through aerosolization carries a very high risk of transmission, and the severity of the disease contracted in this manner is worse than that transmitted through regular community transmission. This places surgeons operating in the CMF region at particularly high risk during the pandemic. There is currently a paucity of information to delineate the best practice for the management of acute CMF trauma during the COVID-19 pandemic. In particular, a clear protocol describing optimal screening, timing of intervention and choice of personal protective equipment, is needed. The authors have proposed an algorithm for management of CMF trauma during the COVID-19 pandemic to ensure that urgent and emergent CMF injuries are addressed appropriately while optimizing the safety of surgeons and other healthcare providers. The algorithm is based on available evidence at the time of writing. As the COVID-19 pandemic continues to evolve and more evidence and better testing becomes available, the algorithm should be modified accordingly.

The impact of surgical manipulation on lower lateral cartilage stiffness.

BACKGROUND: Cephalic trimming of the alar (or lower lateral) cartilage may cause weakening leading to external nasal valve collapse. Numerous methods have been proposed to combat this weakening in order to maintain lateral crural stiffness. The purpose of this study was to quantify the effect of mucosal stripping, cephalic trimming, cephalic turn-in flap, and lateral crural strut grafting on lateral crural stiffness. METHODS: In situ cyclic compressive loading was performed on eight lateral crura in 4 fresh frozen cadaveric specimens. Testing was performed on the unaltered degloved cartilage (intact) and following each of the following interventions: mucosal stripping, cephalic turn-in flap, cephalic trimming, and lateral crural strut grafting. Linear regression of the generated force-displacement curves was used to calculate stiffness. Each intervention was compared to the intact cartilage. RESULTS: Alar cartilage of all of the specimens demonstrated a linear response to compressive loading. Intact cartilage had a mean stiffness of 3.53 N/mm. Mucosal stripping and cephalic turn-in flaps yielded similar stiffness values to intact cartilage. Cephalic trimming reduced stiffness in all cases by a mean of 1.09 N/mm (p = 0.003). Lateral crural strut grafting significantly increased stiffness by a mean of 3.67 N/mm (p = 0.0001). CONCLUSIONS: Cephalic trimming leads to decreased lateral crural stiffness in cadaveric specimens. Cephalic turn-in flaps restore pre-trimmed stiffness, and lateral crural strut grafting increases overall stiffness of the cartilage. These findings should be considered in patients undergoing rhinoplasty, particularly if there are concerns regarding potential external valve collapse.

Structural biomechanics of the craniomaxillofacial skeleton under maximal masticatory loading: Inferences and critical analysis based on a validated computational model.

BACKGROUND: The trend towards optimizing stabilization of the craniomaxillofacial skeleton (CMFS) with the minimum amount of fixation required to achieve union, and away from maximizing rigidity, requires a quantitative understanding of craniomaxillofacial biomechanics. This study uses computational modeling to quantify the structural biomechanics of the CMFS under maximal physiologic masticatory loading. METHODS: Using an experimentally validated subject-specific finite element (FE) model of the CMFS, the patterns of stress and strain distribution as a result of physiological masticatory loading were calculated. The trajectories of the stresses were plotted to delineate compressive and tensile regimes over the entire CMFS volume. RESULTS: The lateral maxilla was found to be the primary vertical buttress under maximal bite force loading, with much smaller involvement of the naso-maxillary buttress. There was no evidence that the pterygo-maxillary region is a buttressing structure, counter to classical buttress theory. The stresses at the zygomatic sutures suggest that two-point fixation of zygomatic complex fractures may be sufficient for fixation under bite force loading. CONCLUSIONS: The current experimentally validated biomechanical FE model of the CMFS is a practical tool for in silico optimization of current practice techniques and may be used as a foundation for the development of design criteria for future technologies for the treatment of CMFS injury and disease.

Use of the Derriford Appearance Scale 59 to assess patient-reported outcomes in secondary cleft surgery.

BACKGROUND: Secondary rhinoplasty, one of the final procedures in addressing the stigma of the cleft lip and palate (CLP), has both functional and aesthetic objectives. The way in which physicians evaluate outcomes in surgery concerning aesthetics is changing. Well-designed patient-reported outcome measures to assess health-related quality of life improvements attributable to surgery are increasingly being used. The Derriford Appearance Scale 59 (DAS-59) is currently the only available validated patient-reported outcome measure that assesses concern about physical appearance. METHODS: Twenty patients with CLP presenting between May 2009 and May 2013 for secondary rhinoplasty to Sunnybrook Health Sciences Centre (Toronto, Ontario) were recruited. DAS-59 measures were administered both preoperatively and at least six months after surgery. Pre- and postoperative measures were scored and compared. Item-by-item analysis of the measure was also performed. RESULTS: Total scores for this CLP group indicated greater concern about appearance than the general population. Across all subscales of the measure, there was a reduction in scores after secondary rhinoplasty suggesting less patient concern with appearance and a positive effect of surgery on patient quality of life. Item-by-item analysis suggested relatively few items in the measure were driving overall change in total scores. CONCLUSION: Comparison of pre- and postoperative scores with the DAS-59 in secondary cleft rhinoplasty suggests there is less concern with appearance after surgery. However, a small number of items within this generic scale contributing to this difference may suggest the need for a more patient specific measure for assessment of surgical outcomes in the cleft population.

HISTORIQUE: La rhinoplastie secondaire, l'une des dernières interventions pour corriger une fente labio-palatine (FLP), a des objectifs à la fois fonctionnels et esthétiques. La manière dont les médecins évaluent les résultats esthétiques après une chirurgie est en évolution. Ils utilisent de plus en plus des mesures de résultats bien conçues faites par les patients pour évaluer les améliorations à la qualité de vie liée à la santé découlant de l'opération. L'échelle d'apparence Derriford en 59 éléments (DAS-59) est la seule mesure validée de résultats déclarés par le patient pour évaluer les préoccupations relatives à l'apparence physique. MÉTHODOLOGIE: Les chercheurs ont recruté 20 patients ayant une FLP qui ont consulté au Sunnybrook Health Sciences Centre de Toronto, en Ontario, entre mai 2009 et mai 2013 pour subir une rhinoplastie secondaire. Ils ont administré les mesures de DAS-59 avant et au moins six mois après l'opération. Ils ont établi les scores des mesures préopératoires et postopératoires et les ont comparées. Ils ont également analysé chaque élément de la mesure. RÉSULTATS: Le score total de ce groupe de FLP s'associait à une plus grande préoccupation relative à l'apparence qu'au sein de la population générale. Dans toutes les sous-échelles de la mesure, les scores diminuaient après la rhinoplastie secondaire, ce qui laisse supposer que les patients se préoccupaient moins de leur apparence et que l'opération avait eu un effet positif sur leur qualité de vie. L'analyse de chaque élément indiquait que relativement peu d'éléments de la mesure suscitaient le changement des scores totaux. CONCLUSION: La comparaison des scores de la DAS-59 avant et après une rhinoplastie secondaire de la FLP indique une moindre préoccupation de l'apparence après l'opération. Cependant, peu d'éléments de cette échelle générique contribuent à cette différence, ce qui laisse croire à la nécessité d'utiliser une mesure plus précise pour évaluer les résultats chirurgicaux au sein de cette population.

Transverse Slicing of the Sixth-Seventh Costal Cartilaginous Junction: A Novel Technique to Prevent Warping in Nasal Surgery.

BACKGROUND: Costal cartilage is an important reconstructive tissue for correcting nasal deformities. Warping of costal cartilage, a recognized complication, can lead to significant functional and aesthetic problems. The authors present a technique to prevent warping that involves transverse slicing of the sixth-seventh costal cartilaginous junction, that when sliced perpendicular to the long axis of the rib, provides multiple long, narrow, clinically useful grafts with balanced cross-sections. The aim was to measure differences in cartilage warp between this technique (TJS) and traditional carving techniques. METHODS: Costal cartilage was obtained from human subjects and cut to clinically relevant dimensions using a custom cutting jig. The sixth-seventh costal cartilaginous junction was sliced transversely leaving the outer surface intact. The adjacent sixth rib cartilage was carved concentrically and eccentrically. The samples were incubated and standardized serial photography was performed over time up to 4 weeks. Warp was quantified by measuring nonlinearity of the grafts using least-squares regression and compared between carving techniques. RESULTS: TJS grafts (n = 10) resulted in significantly less warp than both eccentrically (n = 3) and concentrically carved grafts (n = 3) (P < 0.0001). Warp was significantly higher with eccentric carving compared with concentric carving (P < 0.0001). Warp increased significantly with time for both eccentric (P = 0002) and concentric (P = 0.0007) techniques while TJS warp did not (P = 0.56). CONCLUSION: The technique of transverse slicing costal cartilage from the sixth-seventh junction minimizes warp compared with traditional carving methods providing ample grafts of adequate length and versatility for reconstructive requirements.

Transection of inferior orbital fissure contents for improved access and visibility in orbital surgery.

BACKGROUND: Selective inferior orbital fissure (IOF) content transection for the purpose of surgical access to the posterior orbital floor is a technique that facilitates visualization of the posterior bony ledges of traumatic orbital floor defects. It also has potential advantages in achieving stable placement of reconstructive materials. Although not new, the surgical technique has not yet been described, and the morbidity of the technique has not been quantified. This article describes the procedure and assesses the morbidity specific to the division of related neural structures. METHODS: The technique and surgical anatomy are described and illustrated with intraoperative photographs. Postoperative assessment of neural structures relevant to the division of IOF contents is performed. These values are compared with the nonoperated side to evaluate the morbidity of the technique. RESULTS: The technique, which is consistently used by the senior author in the repair of orbital floor defects with very small posterior ledges or which extend to and involve the IOF, facilitates better visualization of the posterior ledge and posterolateral ledge in such cases. Surgical outcomes including facial sensation and lacrimal function on the operated side remain within the reference range and are not significantly different when compared with the contralateral nonoperated side. CONCLUSIONS: Selective IOF transection aids in the direct visualization of the posterior bony ledges in the repair of posterior orbital floor defects. It therefore may facilitate the placement of reconstructive materials on bony ledges circumferentially, providing stable reconstruction, potentially reducing implant-related complications without causing increased morbidity.

In vitro quantification of strain patterns in the craniofacial skeleton due to masseter and temporalis activities.

Many complications in craniofacial surgery can be attributed to a lack of characterization of facial skeletal strain patterns. This study aimed to delineate human midfacial strain patterns under uniform muscle loading. The left sides of 5 fresh-frozen human cadaveric heads were dissected of all soft tissues except the temporalis and masseter muscles. Tensile forces were applied to the free mandibular ends of the muscles. Maxillary alveolar arches were used to restrain the skulls. Eight strain gauges were bonded to the surface of the midface to measure the strain under single muscle loading conditions (100 N). Maxillary strain gauges revealed a biaxial load state for both muscles. Thin antral bone experienced high maximum principal tensile strains (maximum of 685.5 µÎµ) and high minimum principal compressive strains (maximum of -722.44 µÎµ). Similar biaxial patterns of lower magnitude were measured on the zygoma (maximum of 208.59 µÎµ for maximum principal strains and -78.11 µÎµ for minimum principal strains). Results, consistent for all specimens and counter to previously accepted concepts of biomechanical behavior of the midface under masticatory muscle loading, included high strain in the thin maxillary antral wall, rotational bending through the maxilla and zygoma, and a previously underestimated contribution of the temporalis muscle. This experimental model produced repeatable strain patterns quantifying the mechanics of the facial skeleton. These new counterintuitive findings underscore the need for accurate characterization of craniofacial strain patterns to address problems in the current treatment methods and develop robust design criteria.

Primary orbital fracture repair: development and validation of tools for morphologic and functional analysis.

The purpose of this study was to develop and validate a technique for objective quantitative evaluation of outcomes of orbital reconstruction. Facial three-dimensional images were captured using a Vectra three-dimensional camera. Morphometric analysis was based on interactive anthropometric identification. The analysis was applied to a population of healthy adults (n = 13) and a population of patients following primary repair of unilateral orbital fractures (n = 13). Morphologic results following reconstruction were evaluated by identifying residual asymmetries. All subjects further completed the Derriford Appearance Questionnaire and the Orbital Appearance and Function Questionnaire.Normative reference values for periorbital asymmetry were determined in a reference population. The mean asymmetry was less than 1.6 mm for each measured morphologic feature. In the trauma population, primary orbital reconstruction effectively restored normal periorbital symmetry in 16 of 20 measured parameters. The fracture population showed no significant differences in the degree of asymmetry in globe projection, lower eyelid position, or ciliary margin length.The overall DAS59 scores were significantly higher in the fracture population (P = 0.04). This was due to significantly higher physical distress and dysfunction scores (P = 0.02), as well as a trend toward higher general and social self-consciousness scores (P = 0.06). No significant difference in facial self-consciousness was noted (P = 0.21). Thus, although primary orbital reconstruction was effective in restoring periorbital morphology, patients still experienced a higher level of physical distress and dysfunction than their nontraumatized counterparts. This was in accordance with patient self-report, which indicated that a greater percentage of patients were significantly bothered by functional outcomes postoperatively as opposed to appearance.

A new system for severity scoring of facial fractures: development and validation.

Facial fractures are often the result of high-velocity trauma, causing skeletal disruption affecting multiple anatomic sites to varying degrees. Although several widely accepted classification systems exist, these are mostly region-specific and differ in the classification criteria used, making it impossible to uniformly and comprehensively document facial fracture patterns. Furthermore, a widely accepted system that is able to provide a final summary measure of fracture severity does not exist, making it difficult to investigate the epidemiologic data surrounding facial fracture severity. In this study, a comprehensive method for panfacial fracture documentation and severity measurement is proposed and validated through a retrospective analysis of 63 patients operated on for acute facial fracture. The severity scale was validated through statistical analysis of correlation with surrogate markers of severity (operating room procedure time and number of implants). Spearman correlation coefficients were calculated, and a statistically significant correlation was found between severity score and both number of implants and operating room procedure time (R = 0.92790 and R = 0.68157, respectively). Intraclass correlation coefficients were calculated to assess intrarater and interrater reliabilities of the severity scale and were found to be high (0.97 and 0.99, respectively). This severity scale provides a valuable, validated research tool for the investigation of facial fracture severity across patient populations, allowing for systematic evaluation of facial fracture outcomes, cost-benefit analysis, and objective analysis of the effect of specific interventions.

Internal fixation of mandibular angle fractures: a meta-analysis.

BACKGROUND: The degree of rigidity of internal fixation required for the treatment of mandibular angle fractures has long been at the center of debate in the literature. A statistical comparison between rigid fixation and monocortical fixation has been difficult because of multiple terms, definitions, and technical variations. The purpose of this study was to use the meta-analysis tool to combine information from multiple studies and to compare complication rates for different fixation methods. METHODS: An English language literature search was conducted for articles on mandibular angle fractures. Information was collected on four variables of interest: compression/noncompression technique, monocortical/bicortical screws, number of plates, and location of plates. Five outcome rates were analyzed: infection, reoperation, hardware removal, malunion, and nonunion. Meta-analyses were run using Comprehensive Meta Analysis, version 2.2.03. RESULTS: Twenty-four studies with relevant data on the variables and outcomes of interest met the inclusion criteria. Significantly higher rates of infection, reoperation, and hardware removal were found for compression compared with noncompression, two plates compared with one plate, and for plates located on both the inferior and superior borders as compared with superior or inferior only. There were also significantly higher infection rates for bicortical screws compared with monocortical screws and higher malunion rates for compression compared with noncompression plating techniques. CONCLUSION: The results of this meta-analysis found lower complication rates with the use of noncompression, monocortical, and single-plate fixation, supporting the trend toward a single, superiorly placed, monocortical miniplate for fixation of mandibular angle fractures.

Toward characterization of craniofacial biomechanics.

Surgical reconstruction of craniofacial deformities has advanced significantly in recent years. However, unlike orthopedic surgery of the appendicular skeleton, the biomechanical characterization of the human craniofacial skeleton (CFS) has yet to be elucidated. Attempts to simplify facial skeletal structure into straightforward mechanical device analogies have been insufficient in delineating craniofacial biomechanics. Advanced computational engineering analysis methods offer the potential to accurately and completely define the internal mechanical environment of the CFS. This study developed a finite element (FE) model in the I-deas 10 FEM software package of a preserved cadaveric human CFS and compared the predictions of this model against in vitro strain measurement of simulated occlusal loading forces from a single masseter muscle. The FE model applied shell element modeling to capture the behavior of the thin cortical bone that may play an important role in stabilizing the facial structures against functional loads. In vitro testing included strain measurements at 12 locations for a total of 16 independent channels with less than 150 N of tensile force applied through the masseter muscle into the zygomatic arch origin at 4 different orientations, with 3 trials of 500 recorded data points for each loading orientation. Linear regression analysis yielded a moderate prediction (r = 0.57) between the model and experimentally measured strains. Exclusion of strain comparisons in regions that required greater modeling assumptions greatly improved the correlation (r = 0.70). Future validation studies will benefit from improved placement of strain gauges as guided by FE model predicted strain patterns.

Distraction osteogenesis of radiation-induced orbitozygomatic hypoplasia.

In the last decade, the application of distraction osteogenesis to the craniofacial skeleton has grown to include not only deformities of the mandible, but of the midface, palate, dentoalveolar region, and calvarium. A major advantage of distraction osteogenesis lies in the simultaneous soft tissue histogenesis that accompanies the bony distraction process, allowing for potentially lower relapse rates and improved cosmesis. Although this may seem appropriately suited to irradiation-induced deformities of both hard and soft tissues, there is little in the literature as to the efficacy of this technique in patients who have received radiotherapy. To introduce an effective application of this technology, and highlight some advantages and disadvantages of its application in the irradiated craniofacial skeleton, we present a case of distraction osteogenesis of the orbitozygomatic complex in a patient with radiation induced orbitozygomatic hypoplasia.

Measuring pulsatile forces on the human cranium.

The cyclic stresses in the cranium caused by pulsation of the brain play an important role in the design of materials for cranioplasty, as well as craniofacial development. However, these stresses have never been quantified. In this study, the force in the epidural space against the cranium was measured intraoperatively in 10 patients using a miniature force probe. Heart and ventilatory rates computed from the force tracing correlated closely with the corresponding measured values in the patients, confirming that the forces measured were indeed a result of brain pulsation. The mean outward systolic normal and tangential stresses were 54.2 kilo-Pascals (kPa) and 345.4 kPa, respectively. The systolic shear stress was 199.8 kPa. Through mechanotransduction, these stresses play a role in cranial development. The calculated yield stress of a cranioplasty repair was 0.4 MPa, which is within one order of magnitude of the known strength of common calcium-phosphate cements. This indicates a possible relation of these pulsatile forces and occult failure of calcium-phosphate cement cranioplasties through material fatigue.

In vivo bone engineering in a rabbit femur.

The repair of bone defects in reconstructive surgery has significant limitations. Donor site morbidity, limited supply of autograft, and risks and complications associated with allografting and synthetic bone substitutes are among the most significant. In an effort to address these problems, the search for an ideal bone replacement has led to the development of a new method of poly(lactide-co-glycolide) (PLGA) foam processing, enabling the production of a biodegradable scaffold with similar porosity to human trabecular bone. In this study, these scaffolds were evaluated for bone repair in vivo in a femoral critical-sized segmental defect in New Zealand White (NZW) rabbits. Three groups of nine animals were investigated. In the first group, the critical-sized defects were empty. Scaffolds alone were implanted in the second group, whereas autologous bone marrow cell-loaded scaffolds were implanted in the third group. Animals ambulated freely for 8 weeks after surgery, and bone formation throughout the defects was serially assessed radiographically and quantified using a bone formation index (BFI) measure. Postmortem radiography and histology were also undertaken to examine bone formation. There was a significant effect of applying this technology to the amount of bone formed in the defects as determined by the BFI (F = 3.41, P < 0.05). The mean BFI for the cell-loaded scaffolds was greater than for the control group at all measured time points (2-, 4-, 6-, and 8-week radiographs). This difference was significant for the 2- and 8-week radiographs (P < 0.05). Qualitative histological assessment confirmed these findings. We concluded from these findings that these PLGA scaffolds loaded with marrow-derived progenitor cells yield significant bone formation in a critical-sized rabbit femoral defect. This technology comprising a novel scaffold design and autologous cells may provide an alternative to current strategies for reconstruction of bony defects.