RESUMO
The synergistic engineering of chemical complexity and crystal structures has been applied to Prussian blue analogue (PBA) cathodes in this work. More precisely, the high-entropy concept has been successfully introduced into two structure types of identical composition, namely, cubic and monoclinic. Through the utilization of a variety of complementary characterization techniques, a comprehensive investigation into the electrochemical behavior of the cubic and monoclinic PBAs has been conducted, providing nuanced insights. The implementation of the high-entropy concept exhibits crucial selectivity toward the intrinsic crystal structure. Specifically, while the overall cycling stability of both cathode systems is significantly improved, the synergistic interplay of crystal structure engineering and entropy proves particularly significant. After optimization, the cubic PBA demonstrates structural advantages, showcasing good reversibility, minimal capacity loss, high thermal stability, and unparalleled endurance even under harsh conditions (high specific current and temperature).
RESUMO
In this work, a self-healable, high-stability anode material for rechargeable magnesium batteries (RMBs) has been developed by introducing a core-shell structure of Ga confined by reduced graphene oxide (Ga@rGO). Via this Ga@rGO anode, a specific capacity of 150 mAh g-1 at a current of 0.5 A g-1 stable up to 1200 cycles at room temperature and a specific capacity of 100 mAh g-1 under an ultrahigh current of 1 A g-1 stable up to 700 cycles at a slightly elevated temperature of 40 °C have been achieved. Additionally, the ultrahigh rate, high-cycling stability, and long-cycle life of the anode are attributed to the stabilized structure; such a low-cost, simple, and environmentally friendly direct drop coating (DDC) method is developed to maximize the original state of the active materials. Remarkably, the self-healing ability of anodes is still presented under the ultrahigh charging current. This anode is promising for the development of high rate and high stability RMBs.
RESUMO
Rechargeable magnesium batteries (RMBs) have the potential to provide a sustainable and long-term solution for large-scale energy storage due to high theoretical capacity of magnesium (Mg) metal as an anode, its competitive redox potential (Mg/Mg2+: -2.37 V vs. SHE) and high natural abundance. To develop viable magnesium batteries with high energy density, the electrolytes must meet a range of requirements: high ionic conductivity, wide electrochemical potential window, chemical compatibility with electrode materials and other battery components, favourable electrode-electrolyte interfacial properties and cost-effective synthesis. In recent years, significant progress in electrolyte development has been made. Herein, a comprehensive overview of these advancements is presented. Beginning with the early developments, we particularly focus on the chemical aspects of the electrolytes and their correlations with electrochemical properties. We also highlight the design of new anions for practical electrolytes, the use of electrolyte additives to optimize anode-electrolyte interfaces and the progress in polymer electrolytes.
RESUMO
Layered oxides constitute one of the most promising cathode materials classes for large-scale sodium-ion batteries because of their high specific capacity, scalable synthesis, and low cost. However, their practical use is limited by their low energy density, physicochemical instability, and poor cycling stability. Aiming to mitigate these shortcomings, in this work, we synthesized polycrystalline (PC) and single-crystal (SC) P2-type Na0.67-δMn0.67Ni0.33O2 (NMNO) cathode materials through a solid-state route and evaluated their physicochemical and electrochemical performance. The SC-NMNO cathode with a large mean primary particle size (D50) of 12.7 µm was found to exhibit high cycling stability leading to 47% higher capacity retention than PC-NMNO after 175 cycles at 1C rate in the potential window 4.2-1.5 V. This could be attributed to the effective mitigation of parasitic side reactions at the electrode-electrolyte interface and suppressed intergranular cracking induced by anisotropic volume changes. This is confirmed by the lower volume variation of SC-NMNO (ΔV â¼ 1.0%) compared to PC-NMNO (ΔV â¼ 1.4%) upon charging to 4.2 V. Additionally, the SC-NMNO cathode displayed slightly higher thermal stability compared to PC-NMNO. Both cathodes exhibited good chemical stability against air and water exposure, thus enabling material storage/handling in the ambient atmosphere as well as making them suitable for aqueous processing. In this regard, PC-NMNO was investigated with two low-cost aqueous binders, carboxymethyl cellulose, and sodium trimetaphosphate, which exhibited higher binding strength and displayed excellent electrochemical performance compared to PVDF, which could potentially lead to significant cost reduction in electrode manufacturing.
RESUMO
Potassium-ion batteries (KIBs) can offer high energy density, cyclability, and operational safety while being economical due to the natural abundance of potassium. Utilizing graphite as an anode, suitable cathodes can realize full cells. Searching for potential cathodes, this work introduces P3-type K0.5Ni1/3Mn2/3O2 layered oxide as a potential candidate synthesized by a simple solid-state method. The material works as a 3.2 V cathode combining Ni redox at high voltage and Mn redox at low voltage and exhibits highly reversible K+ ion (de)insertion at ambient and elevated (40-50 °C) temperatures. First-principles calculations suggest the ground state in-plane Mn-Ni ordering in the MO2 sheets is strongly correlated to the K-content in the framework, leading to an interwoven and alternative row ordering of Ni-Mn in K0.5Ni1/3Mn2/3O2. Postmortem and electrochemical titration reveal the occurrence of a solid solution mechanism during K+ (de)insertion. The findings suggest that the Ni addition can effectively tune the electronic and structural properties of the cathode, leading to improved electrochemical performance. This work provides new insights in the quest to develop potential low-cost Co-free KIB cathodes for practical applications in stationary energy storage.
RESUMO
P2-type cobalt-free MnNi-based layered oxides are promising cathode materials for sodium-ion batteries (SIBs) due to their high reversible capacity and well chemical stability. However, the phase transformations during repeated (dis)charge steps lead to rapid capacity decay and deteriorated Na+ diffusion kinetics. Moreover, the electrode manufacturing based on polyvinylidene difluoride (PVDF) binder system has been reported with severely defluorination issue as well as the energy intensive and expensive process due to the use of toxic and volatile N-methyl-2-pyrrolidone (NMP) solvent. It calls for designing a sustainable, better performing, and cost-effective binder for positive electrode manufacturing. In this work, we investigated inorganic sodium metasilicate (SMS) as a viable binder in conjunction with P2-Na0.67Mn0.55Ni0.25Fe0.1Ti0.1O2 (NMNFT) cathode material for SIBs. The NMNFT-SMS electrode delivered a superior electrochemical performance compared to carboxy methylcellulose (CMC) and PVDF based electrodes with a reversible capacity of ~161â mAh/g and retaining ~83 % after 200 cycles. Lower cell impedance and faster Na+ diffusion was also observed in this binder system. Meanwhile, with the assistance of TEM technique, SMS is suggested to form a uniform and stable nanoscale layer over the cathode particle surface, protecting the particle from exfoliation/cracking due to electrolyte attack. It effectively maintained the electrode connectivity and suppressed early phase transitions during cycling as confirmed by operando XRD study. With these findings, SMS binder can be proposed as a powerful multifunctional binder to enable positive electrode manufacturing of SIBs and to overall reduce battery manufacturing costs.
RESUMO
The development of competitive rechargeable Mg batteries is hindered by the poor mobility of divalent Mg ions in cathode host materials. In this work, we explore the dual cation co-intercalation strategy to mitigate the sluggishness of Mg2+ in model TiS2 material. The strategy involves pairing Mg2+ with Li+ or Na+ in dual-salt electrolytes in order to exploit the faster mobility of the latter with the aim to reach better electrochemical performance. A combination of experiments and theoretical calculations details the charge storage and redox mechanism of co-intercalating cationic charge carriers. Comparative evaluation reveals that the redox activity of Mg2+ can be improved significantly with the help of the dual cation co-intercalation strategy, although the ionic radius of the accompanying monovalent ion plays a critical role on the viability of the strategy. More specifically, a significantly higher Mg2+ quantity intercalates with Li+ than with Na+ in TiS2. The reason being the absence of phase transition in the former case, which enables improved Mg2+ storage. Our results highlight dual cation co-intercalation strategy as an alternative approach to improve the electrochemical performance of rechargeable Mg batteries by opening the pathway to a rich playground of advanced cathode materials for multivalent battery applications.
RESUMO
The high-entropy approach is applied to monoclinic Prussian White (PW) Na-ion cathodes to address the issue of unfavorable multilevel phase transitions upon electrochemical cycling, leading to poor stability and capacity decay. A series of Mn-based samples with up to six metal species sharing the N-coordinated positions was synthesized. The material of composition Na1.65 Mn0.4 Fe0.12 Ni0.12 Cu0.12 Co0.12 Cd0.12 [Fe(CN)6 ]0.92 â¡0.08 â 1.09H2 O was found to exhibit superior cyclability over medium/low-entropy and conventional single-metal PWs. We also report, to our knowledge for the first time, that a high-symmetry crystal structure may be advantageous for high-entropy PWs during battery operation. Computational comparisons of the formation enthalpy demonstrate that the compositionally less complex materials are prone to phase transitions, which negatively affect cycling performance. Based on data from complementary characterization techniques, an intrinsic mechanism for the stability improvement of the disordered PW structure upon Na+ insertion/extraction is proposed, namely the dual effect of suppression of phase transitions and mitigation of gas evolution.
RESUMO
Solid-state nuclear magnetic resonance (ssNMR) spectroscopy is a powerful technique for characterizing the local structure and dynamics of battery and other materials. It has been widely used to investigate bulk electrode compounds, electrolytes, and interfaces. Beside common ex situ investigations, in situ and operando techniques have gained considerable importance for understanding the reaction mechanisms and cell degradation of electrochemical cells. Herein, we present the recent development of in situ magic angle spinning (MAS) NMR methodologies to study batteries with high spectral resolution, setting into context possible advances on this topic. A mini cylindrical cell type insert for 4 mm MAS rotors is introduced here, being demonstrated on a Li/VO2F electrochemical system, allowing the acquisition of high-resolution 7Li MAS NMR spectra, spinning the electrochemical cell up to 15 kHz.
RESUMO
The demand for high-performance lithium-ion batteries and thus efficient cathode materials is steadily increasing. In addition to a high energy density and long lifetime, these should also be cost-effective and environmentally benign. Manganese-based materials have particular potential because manganese is available in sufficient quantities and can be supplied at a comparatively low cost. Hence, in this study, manganese-based disordered rock salt oxyfluorides Li2Mn1-xVxO2F (0 ≤ x ≤ 0.5) are synthesized as cathode materials for lithium-ion batteries using high-energy mechanochemical ball-milling. The effect of partial vanadium substitution on the sample properties is analyzed, focusing on the electrochemical properties. Furthermore, a heat treatment process for stabilization of the samples is followed, where the morphology and structure of the samples are studied by powder X-ray diffraction and electron microscopy (SEM/TEM). The oxidation states of the transition metals in the synthesized compositions are further investigated using X-ray absorption near-edge structure spectroscopy. The data analysis reveals that the heat treatment resulted in increased symmetry and reduced defects of ball-milled compounds, but it may also affect the local fluorination degree in the structure. However, the results show that this treatment process has a beneficial effect on capacity retention of the formulated electrodes (â¼81% after 100 cycles), a faster response to the change of cycling rate, and less increase in charge-transfer resistance of the samples during cycling. Such a structural improvement attributed to mitigation of the surface/bulk defects is an additional input to the series of cathode candidates of low temperature stability.
RESUMO
The investigation into intercalation mechanisms in vanadium pentoxide has garnered significant attention within the realm of research, primarily propelled by its remarkable theoretical capacity for energy storage. This comprehensive review delves into the latest advancements that have enriched our understanding of these intricate mechanisms. Notwithstanding its exceptional storage capacity, the compound grapples with challenges arising from inherent structural instability. Researchers are actively exploring avenues for improving electrodes, with a focus on innovative structures and the meticulous fine-tuning of particle properties. Within the scope of this review, we engage in a detailed discussion on the mechanistic intricacies involved in ion intercalation within the framework of vanadium pentoxide. Additionally, we explore recent breakthroughs in understanding its intercalation properties, aiming to refine the material's structure and morphology. These refinements are anticipated to pave the way for significantly enhanced performance in various energy storage applications.
RESUMO
Aqueous zinc-ion batteries form a key post-Li-ion batteries to cater the rising demand for grid storage. Fe-based compounds can be used as economical cathodes for zinc-ion batteries. Herein, we explored iron-based flourophosphate as a potential polyanionic cathode. Involving the Fe3+/2+ redox process, it can reversibly intercalate Zn2+ yielding a capacity of â¼80 mA h g-1, involving a solid-solution mechanism. Polyanionic Fe-based phosphate frameworks can be harnessed as potential low-cost cathodes for secondary zinc-ion batteries.
RESUMO
Calcium (Ca) batteries are attractive post-lithium battery technologies, due to their potential to provide high-voltage and high-energy systems in a sustainable manner. We investigated herein 1,5-poly(anthraquinonylsulfide) (PAQS) for Ca-ion storage with calcium tetrakis(hexafluoroisopropyloxy)borate Ca[B(hfip)4 ]2 [hfip=OCH(CF3 )2 ] electrolytes. It is demonstrated that PAQS could be synthesized in a cost-effective approach and be processed environmentally friendly into the electrodes. The PAQS cathodes could provide 94â mAh g-1 capacity at 2.2â V vs. Ca at 0.5C (1C=225â mAh g-1 ). However, cycling of the cells was severely hindered due to the fast degradation of the metal anode. Replacing the Ca metal anode with a calcium-tin (Ca-Sn) alloy anode, the PAQS cathodes exhibited long cycling performance (45â mAh g-1 at 0.5C after 1000â cycles) and superior rate capability (52â mAh g-1 at 5C). This is mainly ascribed to the flexible structure of PAQS and good compatibility of the alloy anodes with the electrolyte solutions, which allow reversible quinone carbonyl redox chemistry in the Ca battery systems. The promising properties of PAQS indicate that further exploration of the organic cathode materials could be a feasible direction towards green Ca batteries.
RESUMO
The high ionic conductivity and good oxidation stability of halide-based solid electrolytes evoke strong interest in this class of materials. Nonetheless, the superior oxidative stability compared to sulfides comes at the expense of limited stability toward reduction and instability against metallic lithium anodes, which hinders their practical use. In this context, the gradual fluorination of Li2ZrCl6-xFx (0 ≤ x ≤ 1.2) is proposed to enhance the stability toward lithium-metal anodes. The mechanochemically synthesized fluorine-substituted compounds show the expected distorted local structure (M2-M3 site disorder) and significant change in the overall Li-ion migration barrier. Theoretical calculations reveal an approximate minimum energy path for Li2ZrCl6-xFx (x = 0 and 0.5) with an increase in the Li+ migration energy barrier for Li2ZrCl5.5F0.5 in comparison to Li2ZrCl6. However, it is found that the fluorine-substituted compound exhibits substantially lower polarization after 800 h of lithium stripping and plating owing to enhanced interfacial stability against the lithium metal, as revealed by density functional theory and ex situ X-ray photoelectron spectroscopy, thanks to the formation of a fluorine-rich passivating interphase.
RESUMO
Development of highly efficient, earth-abundant, and stable bifunctional electrocatalysts is pivotal for designing viable next-generation metal-air batteries. Cobalt-based phosphates provide a treasure house to design electrocatalysts, with a wide range of cation substitutions to further enhance their electrocatalytic activity. In particular, phosphates with distorted geometry show favorable binding efficiency toward water molecules with low overpotential. In the present work, zinc-substituted cobalt phosphate ZnCo2(PO4)2 was investigated. Its crystal structure was solved to a monoclinic framework built with CoO6 octahedra and distorted CoO5/ZnO5 trigonal bipyramid leading to efficient bifunctional electrocatalytic activity. It offers robust structural stability with onset potential values of 0.87 V (vs reversible hydrogen electrode (RHE)) and 1.50 V (vs RHE) for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) processes, respectively, comparable to the precious metal catalysts. The origin and stability of the bifunctional activity were probed by combining ex situ diffraction and electron microscopy corroborated by ab initio calculations. Overall, zinc-substituted cobalt phosphate [ZnCo2(PO4)2] forms a potential bifunctional electrocatalyst with tunable local cobalt coordination that can be harnessed for metal-air batteries.
RESUMO
Development of lithium-ion batteries with composite solid polymer electrolytes (CPSEs) has attracted attention due to their higher energy density and improved safety compared to systems utilizing liquid electrolytes. While it is well known that the microstructure of CPSEs affects the ionic conductivity, thermal stability, and mechanical integrity/long-term stability, the bridge between the microscopic and macroscopic scales is still unclear. Herein, we present a systematic investigation of the distribution of TEMPO-oxidized cellulose nanofibrils (t-CNFs) in two different molecular weights of poly(ethylene oxide) (PEO) and its effect on Li+ ion mobility, bulk conductivity, and long-term stability. For the first time, we link local Li-ion mobility at the nanoscale level to the morphology of CPSEs defined by PEO spherulitic growth in the presence of t-CNF. In a low-MW PEO system, spherulites occupy a whole volume of the derived CPSE with t-CNF being incorporated in between lamellas, while their nuclei remain particle-free. In a high-MW PEO system, spherulites are scarce and their growth is arrested in a non-equilibrium cubic shape due to the strong t-CNF network surrounding them. Electrochemical strain microscopy and solid-state 7Li nuclear magnetic resonance spectroscopy confirm that t-CNF does not partake in Li+ ion transport regardless of its distribution within the polymer matrix. Free-standing CSPE films with low-MW PEO have higher conductivity but lack long-term stability due to the existence of uniformly distributed, particle-free, spherulite nuclei, which have very little resistance to Li dendrite growth. On the other hand, high-MW PEO has lower conductivity but demonstrates a highly stable Li cycling response for more than 1000 h at 0.2 mA/cm2 and 65 °C and more than 100 h at 85 °C. The study provides a direct link between the microscopic dynamic, Li-ion transport, bulk mechanical properties and long-term stability of the derived CPSE and, and as such, offers a pathway towards design of robust all-solid-state Li-metal batteries.
RESUMO
Multivalent batteries show promising prospects for next-generation sustainable energy storage applications. Herein, we report a polytriphenylamine (PTPAn) composite cathode capable of highly reversible storage of tetrakis(hexafluoroisopropyloxy) borate [B(hfip)4 ] anions in both Magnesium (Mg) and calcium (Ca) battery systems. Spectroscopic and computational studies reveal the redox reaction mechanism of the PTPAn cathode material. The Mg and Ca cells exhibit a cell voltage >3â V, a high-power density of â¼â¼3000â W kg-1 and a high-energy density of â¼â¼300â Wh kg-1 , respectively. Moreover, the combination of the PTPAn cathode with a calcium-tin (Ca-Sn) alloy anode could enable a long battery-life of 3000â cycles with a capacity retention of 60 %. The anion storage chemistry associated with dual-ion electrochemical concept demonstrates a new feasible pathway towards high-performance divalent ion batteries.
RESUMO
Porphyrin derivatives represent an emerging class of redox-active materials for sustainable electrochemical energy storage. However, their structure-performance relationship is poorly understood, which confines their rational design and thus limits access to their full potential. To gain such understanding, we here focus on the role of the metal ion within porphyrin molecules. The A2 B2 -type porphyrin 5,15-bis(ethynyl)-10,20-diphenylporphyrin and its first-row transition metal complexes from Co to Zn are used as models to investigate the relationships between structure and electrochemical performance. It turned out that the choice of central metal atom has a profound influence on the practical voltage window and discharge capacity. The results of DFT calculations suggest that the choice of central metal atom triggers the degree of planarity of the porphyrin. Single crystal diffraction studies illustrate the consequences on the intramolecular rearrangement and packing of metalloporphyrins. Besides the direct effect of the metal choice on the undesired solubility, efficient packing and crystallinity are found to dictate the rate capability and the ion diffusion along with the porosity. Such findings open up a vast space of compositions and morphologies to accelerate the practical application of resource-friendly cathode materials to satisfy the rapidly increasing need for efficient electrical energy storage.
RESUMO
Calcium (Ca) batteries represent an attractive option for electrochemical energy storage due to physicochemical and economic reasons. The standard reduction potential of Ca (-2.87 V) is close to Li and promises a wide voltage window for Ca full batteries, while the high abundance of Ca in the earth's crust implicates low material costs. However, the development of Ca batteries is currently hindered by technical issues such as the lack of compatible electrolytes for reversible Ca2+ plating/stripping and high-capacity cathodes with fast kinetics. Herein, we employed FeS2 as a conversion cathode material and combined it with a Li+/Ca2+ hybrid electrolyte for Ca batteries. We demonstrate that Li+ ions ensured reversible Ca2+ plating/stripping on the Ca metal anode with a small overpotential. At the same time, they enable the conversion of FeS2, offering high discharge capacity. As a result, the Ca/FeS2 cell demonstrated an excellent long-term cycling performance with a high discharge capacity of 303 mAh g-1 over 200 cycles. Even though the practical application of such an approach is questionable due to the high quantity of electrolytes, we believe that our scientific findings still provide new directions for studying Ca batteries with long-term cycling.