Development of hybrid MIL-53(Al)@CBS for ternary adsorption of tetracyclines antibiotics in water: Physical interpretation of the adsorption mechanism.

In this study, a hybrid material, MIL-53(Al)@CBS, was synthesized via the solvothermal method, involving the growth of MIL-53(Al) crystals on cocoa bean shell residues (CBS). Physicochemical characterization techniques, including TGA, BET, FTIR, XRD, and SEM, confirmed successful hybridization. MIL-53(Al)@CBS was employed as an adsorbent for antibiotics (oxytetracycline, tetracycline, chlortetracycline) separation from aqueous solutions. Parameters like pH, adsorbent dose, concentration, time, and temperature were systematically evaluated. FTIR revealed π-π interactions and hydrogen bonds between tetracyclines and the adsorbent. MIL-53(Al)@CBS exhibited adsorption, with removal rates up to 98.92%, 99.04%, and 98.24% for OTC, TC, and CTC, respectively. Kinetics suggested adsorption depends on active site availability, with TC adsorbing fastest. Microscopic models showed adsorption on three distinct active site types with different affinities without competition or adherence to the Langmuir hypothesis. Importantly, MIL-53(Al)@CBS maintained high adsorption capacity even after ten washing cycles, highlighting its potential for water treatment.

Metal-Organic Frameworks as Sensors for Human Amyloid Diseases.

Metal-organic frameworks (MOFs) are versatile compounds with emergent applications in the fabrication of biosensors for amyloid diseases. They hold great potential in biospecimen protection and unprecedented probing capabilities for optical and redox receptors. In this Review, we summarize the main methodologies employed in the fabrication of MOF-based sensors for amyloid diseases and collect all available data in the literature related to their performance (detection range, limit of detection, recovery, time of analysis, among other parameters). Nowadays, MOF sensors have evolved to a point where they can, in some cases, outperform technologies employed in the detection of several amyloid biomarkers (amyloid ß peptide, α-synuclein, insulin, procalcitonin, and prolactin) present in biological fluids, such as cerebrospinal fluid and blood. A special emphasis has been given by researchers on Alzheimer's disease monitoring to the detriment of other amyloidosis that are underexploited despite their societal relevance (e.g., Parkinson's disease). There are still important obstacles to overcome in order to selectively detect the various peptide isoforms and soluble amyloid species associated with Alzheimer's disease. Furthermore, MOF contrast agents for imaging peptide soluble oligomers in living humans are also scarce (if not nonexistent), and action in this direction is unquestionably required to clarify the contentious link between the amyloidogenic species and the disease, guiding research toward the most promising therapeutic strategies.

Easy Handling and Cost-Efficient Processing of a Tb3+-MOF: The Emissive Capacity of the Membrane-Immobilized Material, Water Vapour Adsorption and Proton Conductivity.

The development of convenient, non-complicated, and cost-efficient processing techniques for packing low-density MOF powders for industry implementation is essential nowadays. To increase MOFs' availability in industrial settings, we propose the synthesis of a novel 3D Tb-MOF (1) and a simple and non-expensive method for its immobilization in the form of pellets and membranes in polymethacrylate (PMMA) and polysulphone (PSF). The photoluminescent properties of the processed materials were investigated. To simulate industrial conditions, stability towards temperature and humidity have been explored in the pelletized material. Water-adsorption studies have been carried out in bulk and processed materials, and because of the considerable capacity to adsorb water, proton-conduction studies have been investigated for 1.

Adsorptive Capacity, Inhibitory Activity and Processing Techniques for a Copper-MOF Based on the 3,4-Dihydroxybenzoate Ligand.

Due to the fast, emerging development of antibiotic-resistant bacteria, the need for novel, efficient routes to battle these pathogens is crucial; in this scenario, metal-organic frameworks (MOFs) are promising materials for combating them effectively. Herein, a novel Cu-MOF-namely 1-that displays the formula [Cu3L2(DMF)2]n (DMF = N,N-dimethylformamide) is described, synthesized by the combination of copper(II) and 3,4-dihydroxybenzoic acid (H3L)-both having well-known antibacterial properties. The resulting three-dimensional structure motivated us to study the antibacterial activity, adsorptive capacity and processability of the MOF in the form of pellets and membranes as a proof-of-concept to evaluate its future application in devices.

Multifunctional Lanthanide-Based Metal-Organic Frameworks Derived from 3-Amino-4-hydroxybenzoate: Single-Molecule Magnet Behavior, Luminescent Properties for Thermometry, and CO2 Adsorptive Capacity.

Herein, we describe and study a new family of isostructural multifunctional metal-organic frameworks (MOFs) with the formula {[Ln5L6(OH)3(DMF)3]·5H2O}n (where (H2L) is 3-amino-4-hydroxybenzoic acid ligand) for magnetism and photoluminescence. Interestingly, three of the materials (Dy-, Er-, and Yb-based MOFs) present single-molecule magnet (SMM) behavior derived from the magnetic anisotropy of the lanthanide ions as a consequence of the adequate electronic distribution of the coordination environment. Additionally, photoluminescence properties of the ligand in combination with Eu and Tb counterparts were studied, including the heterometallic Eu-Tb mixed MOF that shows potential as ratiometric luminescent thermometers. Finally, the porous nature of the framework allowed showing the CO2 sorption capacity.

Porphyrin NanoMetal-Organic Frameworks as Cancer Theranostic Agents.

Metal-Organic Frameworks (MOFs) are hybrid multifunctional platforms that have found remarkable applications in cancer treatment and diagnostics. Independently, these materials can be employed in cancer treatment as intelligent drug carriers in chemotherapy, photothermal therapy, and photodynamic therapy; conversely, MOFs can further be used as diagnostic tools in fluorescence imaging, magnetic resonance imaging, computed tomography imaging, and photoacoustic imaging. One essential property of these materials is their great ability to fine-tune their composition toward a specific application by way of a judicious choice of the starting building materials (metal nodes and organic ligands). Moreover, many advancements were made concerning the preparation of these materials, including the ability to downsize the crystallites yielding nanoporous porphyrin MOFs (NMOFs) which are of great interest for clinical treatment and diagnostic theranostic tools. The usage of porphyrins as ligands allows a high degree of multifunctionality. Historically these molecules are well known for their reactive oxygen species formation and strong fluorescence characteristics, and both have proved helpful in cancer treatment and diagnostic tools. The anticipation that porphyrins in MOFs could prompt the resulting materials to multifunctional theranostic platforms is a reality nowadays with a series of remarkable and ground-breaking reports available in the literature. This is particularly remarkable in the last five years, when the scientific community witnessed rapid development in porphyrin MOFs theranostic agents through the development of imaging technologies and treatment strategies for cancer. This manuscript reviews the most relevant recent results and achievements in this particular area of interest in MOF chemistry and application.

Bone Tissue Disorders: Healing Through Coordination Chemistry.

Osteoporosis, Paget's disease and osteosarcoma are a few examples of bone tissue disorders that affect millions of people worldwide. These conditions can strictly limit the lifestyle of patients and may even lead to their demise. To prevent this or, at least, try to manage the situation, there are several treatments available on the market. Notwithstanding, research has been driven by the possibility to improve the existing therapies, as well as to find new approaches that could better respond to these diseases. In this Review the path is shown through which, in recent years, coordination compounds have been prepared and manufactured to be applied in the management of bone tissue disorders. Starting with the design and preparation of the coordination compounds with various dimensionalities, two approaches have been used: (1) they are prepared as three-dimensional cages that can act as delivery systems for therapeutic substances, or (2) they are constructed/prepared from compounds with intrinsic therapeutic properties. Following this, several strategies have been explored to manufacture the effective delivery to the patients. The versatility of coordination compounds has allowed their use in the preparation of drug tablets, coatings for titanium implants, or even scaffolds for bone tissue engineering. In the end, it becomes clear that these compounds can be a valuable approach to reach a better treatment for bone tissue disorders. Nonetheless, along the road, a few bumps have appeared concerning the therapeutic profile, such as the effect of the structural arrangement or particle size.

Metal-organic frameworks: a future toolbox for biomedicine?

The present review focuses on the use of Metal-Organic Frameworks, (MOFs) highlighting the most recent developments in the biological field. This review assesses, in the first instance, the cytotoxicity of MOFs (particularly those used for various biological applications described throughout this review), and shows that for standard MOFs based on metals already present in active molecules of the human body, toxicity is not a significant limitation. Here we underline the MIL-, UiO- and ZIF-series of MOFs which remain until now the most used materials in drug delivery of active pharmaceutical ingredients (APIs), such as antitumourals or retroviral drugs (with high loading and slow release time). Porosity remains undoubtedly the most studied key property of MOFs, that allows the protection of active biomolecules such as enzymes or the development of antimicrobial materials. Emphasis is given on the usage of MOFs for the detection of biomarkers in biological fluids such as urine and blood (detection of cystinuria, identification of penicillin anaphylaxis, urea, bilirubin, biomarkers related to human intoxication, tumoural indicators, among several others), for which a number of simple devices (such as paper strips) were developed. Despite the remarkable and promising results presented in recent years, the literature remains scarce (mostly non-existent) in terms of direct comparison of these novel technologies with the solutions presently available in the market. Action on this side may make the difference in the next years concerning research on MOFs, to see if some of these materials may reach the end-user as new and more efficient treatments or detection approaches.

Thiophene- and Carbazole-Substituted N-Methyl-Fulleropyrrolidine Acceptors in PffBT4T-2OD Based Solar Cells.

The impact of fullerene side chain functionalization with thiophene and carbazole groups on the device properties of bulk-heterojunction polymer:fullerene solar cells is discussed through a systematic investigation of material blends consisting of the conjugated polymer poly[(5,6-difluoro-2,1,3-benzothiadiazol-4,7-diyl)-alt-(3,3‴-di(2-octyldodecyl)-2,2';5',2″;5″,2‴-quaterthiophen-5,5‴-diyl)] (PffBT4T-2OD) as donor and C60 or C70 fulleropyrrolidines as acceptors. The photovoltaic performance clearly depended on the molecular structure of the fulleropyrrolidine substituents although no direct correlation with the surface morphology of the photoactive layer, as determined by atomic force microscopy, could be established. Although some fulleropyrrolidines possess favorable lowest unoccupied molecular orbital levels, when compared to the standard PC71BM, they originated OPV cells with inferior efficiencies than PC71BM-based reference cells. Fulleropyrrolidines based on C60 produced, in general, better devices than those based on C70, and we attribute this observation to the detrimental effect of the structural and energetic disorder that is present in the regioisomer mixtures of C70-based fullerenes, but absent in the C60-based fullerenes. These results provide new additional knowledge on the effect of the fullerene functionalization on the efficiency of organic solar cells.

PET/CT Imaging with an 18F-Labeled Galactodendritic Unit in a Galectin-1-Overexpressing Orthotopic Bladder Cancer Model.

Galectins are carbohydrate-binding proteins overexpressed in bladder cancer (BCa) cells. Dendritic galactose moieties have a high affinity for galectin-expressing tumor cells. We radiolabeled a dendritic galactose carbohydrate with 18F (18F-labeled galactodendritic unit 4) and examined its potential in imaging urothelial malignancies. Methods: The 18F-labeled first-generation galactodendritic unit 4 was obtained from its tosylate precursor. We conducted in vivo studies in a galectin-expressing UMUC3 orthotopic BCa model to determine the ability of 18F-labeled galactodendritic unit 4 to image BCa. Results: Intravesical administration of 18F-labeled galactodendritic unit 4 allowed specific accumulation of the carbohydrate radiotracer in galectin-1-overexpressing UMUC3 orthotopic tumors when imaged with PET. The 18F-labeled galactodendritic unit 4 was not found to accumulate in nontumor murine bladders. Conclusion: The 18F-labeled galactodendritic unit 4 and similar analogs may be clinically relevant and exploitable for PET imaging of galectin-1-overexpressing bladder tumors.

PffBT4T-2OD Based Solar Cells with Aryl-Substituted N-Methyl-Fulleropyrrolidine Acceptors.

Novel C60 and C70 N-methyl-fulleropyrrolidine derivatives, containing both electron withdrawing and electron donating substituent groups, were synthesized by the well-known Prato reaction. The corresponding highest occupied molecular orbital (HOMO)/lowest unoccupied molecular orbital (LUMO) energy levels were determined by cyclic voltammetry, from the onset oxidation and reduction potentials, respectively. Some of the novel fullerenes have higher LUMO levels than the standards PC61BM and PC71BM. When tested in PffBT4T-2OD based polymer solar cells, with the standard architecture ITO/PEDOT:PSS/Active-Layer/Ca/Al, these fullerenes do not bring about any efficiency improvements compared to the standard PC71BM system, however they show how the electronic nature of the different substituents strongly affects the efficiency of the corresponding organic photovoltaic (OPV) devices. The functionalization of C70 yields a mixture of regioisomers and density functional theory (DFT) calculations show that these have systematically different electronic properties. This electronic inhomogeneity is likely responsible for the lower performance observed in devices containing C70 derivatives. These results help to understand how new fullerene acceptors can affect the performance of OPV devices.

One-dimensional ladder gallium coordination polymer.

A one-dimensional ladder-type coordination polymer, poly[[(µ2-hydroxido)(µ2-1H-pyrazole-3,5-di-carboxyl-ato)gallium(III)] monohydrate], [Ga(C5H2N2O4)(OH)(H2O)] n or [Ga(HPDC)(OH)(H2O)] n , I, isotypic with a V3+ coordination polymer previously reported by Chen et al. [J. Coord. Chem. (2008). 61, 3556-3567] was prepared from Ga3+ and pyrazole-3,5-di-carb-oxy-lic acid monohydrate (H3PDC·H2O). Compound I was isolated using three distinct experimental methods: hydro-thermal (HT), microwave-assisted (MWAS) and one-pot (OP) and the crystallite size should be fine-tuned according to the method employed. The coordination polymeric structure is based on a dimeric Ga3+ moiety comprising two µ2-bridging hydroxide groups, which are inter-connected by HPDC2- anionic organic linkers. The close packing of individual polymers is strongly directed by the supra-molecular inter-actions, namely several O-H⋯O and N-H⋯O hydrogen-bonding inter-actions.

New Materials Based on Cationic Porphyrins Conjugated to Chitosan or Titanium Dioxide: Synthesis, Characterization and Antimicrobial Efficacy.

The post-functionalization of 5,10,15-tris(1-methylpyridinium-4-yl)-20-(pentafluorophenyl)porphyrin tri-iodide, known as a highly efficient photosensitizer (PS) for antimicrobial photodynamic therapy (aPDT), in the presence of 3- or 4-mercaptobenzoic acid, afforded two new tricationic porphyrins with adequate carboxylic pending groups to be immobilized on chitosan or titanium oxide. The structural characterization of the newly obtained materials confirmed the success of the porphyrin immobilization on the solid supports. The photophysical properties and the antimicrobial photodynamic efficacy of the non-immobilized porphyrins and of the new conjugates were evaluated. The results showed that the position of the carboxyl group in the mercapto units or the absence of these substituents in the porphyrin core could modulate the action of the photosensitizer towards the bioluminescent Gram-negative Escherichia coli bacterium. The antimicrobial activity was also influenced by the interaction between the photosensitizer and the type of support (chitosan or titanium dioxide). The new cationic porphyrins and some of the materials were shown to be very stable in PBS and effective in the photoinactivation of E. coli bacterium. The physicochemical properties of TiO2 allowed the interaction of the PS with its surface, increasing the absorption profile of TiO2, which enables the use of visible light, inactivating the bacteria more efficiently than the corresponding PS immobilized on chitosan.

Copper-phthalocyanine coordination polymer as a reusable catechol oxidase biomimetic catalyst.

The development of selective, efficient, and recoverable/reusable catalysts for oxidation reactions has become one of the main challenges of modern chemistry. Considering our interest in efficient catalytic systems based on porphyrin (Por) and phthalocyanine (Pc) coordination polymers, we report here the synthesis, characterization and catalytic activity of a new Pc coordination polymer (coined hereafter as Cu4CuPcSPy). The new Pc material was obtained in excellent yield, from the reaction of H2PcSPy with an excess amount of copper(ii) acetate. The catalytic efficiency of Cu4CuPcSPy was evaluated in the oxidation of 3,5-di-tert-butylcatechol (3,5-DTBC) in the presence of molecular oxygen from air, with or without the addition of aqueous 30% hydrogen peroxide. The comparison between the homogeneous (CuPcSPy) and the heterogeneous (Cu4CuPcSPy) catalytic systems showed a better performance for the Cu4CuPcSPy material, that can be recovered by filtration and reused, maintaining its activity roughly unchanged during three catalytic cycles. An increment of approximately 30% was also verified in the catalytic activity of the homogeneous and heterogeneous systems by adding aqueous hydrogen peroxide to the catalytic reactions.

Recent Developments in the Optimization of the Bulk Heterojunction Morphology of Polymer: Fullerene Solar Cells.

Organic photovoltaic (OPV) devices, made with semiconducting polymers, have recently attained a power conversion efficiency (PCE) over 14% in single junction cells and over 17% in tandem cells. These high performances, together with the suitability of the technology to inexpensive large-scale manufacture, over lightweight and flexible plastic substrates using roll-to-roll (R2R) processing, place the technology amongst the most promising for future harvesting of solar energy. Although OPVs using non-fullerene acceptors have recently outperformed their fullerene-based counterparts, the research in the development of new fullerenes and in the improvement of the bulk-heterojunction (BHJ) morphology and device efficiency of polymer:fullerene solar cells remains very active. In this review article, the most relevant research works performed over the last 3 years, that is, since the year 2016 onwards, in the field of fullerene-based polymer solar cells based on the copolymers PTB7, PTB7-Th (also known as PBDTTT-EFT) and PffBT4T-2OD, are presented and discussed. This review is primarily focused on studies that involve the improvement of the BHJ morphology, efficiency and stability of small active area devices (typically < 15 mm²), through the use of different processing strategies such as the use of different fullerene acceptors, different processing solvents and additives and different thermal treatments.

Bifunctional Porphyrin-Based Nano-Metal-Organic Frameworks: Catalytic and Chemosensing Studies.

The use of 5,10,15,20-tetrakis( p-phenylphosphonic acid)porphyrin (H10TPPA) as a linker in the preparation of porphyrin-based metal-organic frameworks (Por-MOFs) through coordination to lanthanides cations is reported. The resulting unprecedented materials, formulated as [M(H9TPPA)(H2O) x]Cl2· yH2O [ x + y = 7; M3+ = La3+ (1), Yb3+ (2), and Y3+ (3)], prepared using hydrothermal synthesis, were extensively characterized in the solid-state, for both their structure and thermal robustness, using a myriad of solid-state advanced techniques. Materials were evaluated as heterogeneous catalysts in the oxidation of thioanisole by H2O2 and as chemosensors for detection of nitroaromatic compounds (NACs). Nano-Por-MOFs 1-3 proved to be effective as heterogeneous catalysts in the sulfoxidation of thioanisole, with Por-MOF 1 exhibiting the best catalytic performance with a conversion of thioanisole of 89% in the first cycle and with a high selectivity for the sulfoxide derivative (90%). The catalyst maintained its activity roughly constant in three consecutive runs. Por-MOFs 1-3 can be employed as chemosensors because of a measured fluorescence quenching up to 70% for nitrobenzene, 1,4-dinitrobenzene, 4-nitrophenol, and phenol, with 2,4,6-trinitrophenol exhibiting a peculiar fluorescence profile.

Technetium-99m complexes of l-arginine derivatives for targeting amino acid transporters.

Although relevant from the clinical point of view, radiotracers targeting cationic amino acid transporters are relatively unexplored and, in particular, no metal-based radiotracers are known. The rare examples of complexes recognized by amino acid transporters, namely by the Na+-independent neutral l-type amino acid transporter 1 (LAT1), are 99mTc(i)/Re(i) compounds. Herein, we describe conjugates comprising a pyrazolyl-diamine chelating unit and the cationic amino acid l-arginine (l-Arg) linked by a propyl (L1) or hexyl linker (L2), which allowed the preparation of stable complexes of the type fac-[99mTc(CO)3(k3-L)]+ (Tc1, L = L1; Tc2, L = L2) and of the respective surrogates Re1 and Re2. Interestingly, complex Tc2 exhibited moderate levels of time-dependent internalization in three human tumoural cell lines, with approximately 3% of total applied activity internalized, corresponding to 21% of the cell-associated activity. A putative mechanism of retention in the cytoplasm of cells could be the interaction of the complex with inducible nitric oxide synthase (iNOS), which is the enzyme responsible for the catalytic oxidation of l-Arg to citrulline and nitric oxide. However, the surrogate complex Re2 does not recognize iNOS, as demonstrated by the in vitro assays with purified iNOS and in studies with lipopolysaccharide(LPS)-activated macrophages. Preliminary mechanistic studies suggest that the internalization of Tc2 is linked to the cationic amino acid transporters, namely system y+. This finding might open the way towards the development of novel families of metal-based radiotracers for probing metabolically active cancer cells.

Unprecedented Double aza-Michael Addition within a Sapphyrin Core.

A novel sapphyrin derivative was obtained from the reaction between a free-base sapphyrin and dimethyl acetylenedicarboxylate (DMAD). The formation of the new compound involved a double aza-Michael addition of two pyrrolic NH groups to a DMAD molecule, with the formation of a disubstituted ethano bridge. The NMR spectral data reveal a product with an unsymmetrical structure; DFT calculations provided support for a structure in which the ethano bridge links two adjacent pyrrole units. The present study provides a seemingly unprecedented example of an N,N'-dinucleophile reacting with DMAD to form a heterocyclic compound in which the two N-atoms are linked to the two sp(3) carbon atoms derived from a substituted acetylene.

ESI-MS/MS of expanded porphyrins: a look into their structure and aromaticity.

Electrospray mass spectrometry/mass spectrometry was used to investigate the gas-phase properties of protonated expanded porphyrins, in order to correlate those with their structure and conformation. We have selected five expanded meso-pentafluorophenyl porphyrins, respectively, a pair of oxidized/reduced fused pentaphyrins (22 and 24 π electrons), a pair of oxidized/reduced regular hexaphyrins (26 and 28 π electrons) and a regular doubly N-fused hexaphyrin (28 π electrons). The gas-phase behavior of the protonated species of oxidized and reduced expanded porphyrins is different. The oxidized species (aromatic Hückel systems) fragment more extensively, mainly by the loss of two HF molecules. The reduced species (Möbius aromatic or Möbius-like aromatic systems) fragment less than their oxidized counterparts because of their increased flexibility. The protonated regular doubly fused hexaphyrin (non-aromatic Hückel system) shows the least fragmentation even at higher collision energies. In general, cyclization through losses of HF molecules decreases from the aromatic Hückel systems to Möbius aromatic or Möbius-like aromatic systems to non-aromatic Hückel systems and is related to an increase in conformational distortion. Copyright © 2016 John Wiley & Sons, Ltd.

[28]Hexaphyrin derivatives for anion recognition in organic and aqueous media.

Hexaphyrin-based anion chemosensors are reported for the first time. The meso-hexakis(ethylenediamine)-substituted [28]hexaphyrins 2 and 3 revealed strong affinity for F(-), AcO(-) and H2PO4(-). Adsorption constants in aqueous media were determined on a gold piezoelectric crystal coated with 2 and 3. (1)H NMR titrations and molecular dynamics simulations showed the main interactions between hosts and guests.