RESUMO
The treatment of burn wounds remains a clinical challenge due to the need for repeated dressings changes. Therefore, the development of a dressing system that can be atraumatically removed from the wound bed can be considered a breakthrough and improve treatment times. In this work, the development of an injectable, fast-gelling hydrogel is proposed that can change its mechanical properties when exposed to visible light. The hydrogels are prepared by a "click" amino-yne reaction between poly(ethylene glycol) (PEG) functionalized with propiolic acid and the amino groups of poly(ethyleneimine) (PEI). The hydrogels exhibit a fast gelation time, which can be adjusted by changing the weight percentage and molecular weight of the precursors. They also exhibit good swelling ability and adhesion to living tissues. More importantly, their mechanical properties changed upon irradiation with green light. This loss of properties is achieved by a 1 O2 -mediated mechanism, as confirmed by the degradation of the ß-aminoacrylate linker. Moreover, the in vitro cell compatibility results of the hydrogels and their degradation products show good cytocompatibility. Therefore, it is believed that these hydrogels can be considered as materials with great potential for an innovative strategy for the treatment of burn wounds.
Assuntos
Queimaduras , Polietilenoimina , Humanos , Materiais Biocompatíveis , Hidrogéis/farmacologia , Polietilenoglicóis , Luz , Queimaduras/terapiaRESUMO
The hair follicle (HF) is a multicellular complex structure of the skin that contains a reservoir of multipotent stem cells. Traditional hair repair methods such as drug therapies, hair transplantation, and stem cell therapy have limitations. Advances in nanotechnology offer new approaches for HF regeneration, including controlled drug release and HF-specific targeting. Until recently, embryogenesis was thought to be the only mechanism for forming hair follicles. However, in recent years, the phenomenon of wound-induced hair neogenesis (WIHN) or de novo HF regeneration has gained attention as it can occur under certain conditions in wound beds. This review covers HF-specific targeting strategies, with particular emphasis on currently used nanotechnology-based strategies for both hair loss-related diseases and HF regeneration. HF regeneration is discussed in several modalities: modulation of the hair cycle, stimulation of progenitor cells and signaling pathways, tissue engineering, WIHN, and gene therapy. The HF has been identified as an ideal target for nanotechnology-based strategies for hair regeneration. However, some regulatory challenges may delay the development of HF regeneration nanotechnology based-strategies, which will be lastly discussed.
Assuntos
Folículo Piloso , Cabelo , Pele/metabolismo , Engenharia Tecidual/métodos , Regeneração/fisiologiaRESUMO
This study investigates the osteogenic differentiation of umbilical-cord-derived human mesenchymal stromal cells (hUC-MSCs) on biphasic calcium phosphate (BCP) scaffolds derived from cuttlefish bone doped with metal ions and coated with polymers. First, the in vitro cytocompatibility of the undoped and ion-doped (Sr2+, Mg2+ and/or Zn2+) BCP scaffolds was evaluated for 72 h using Live/Dead staining and viability assays. From these tests, the most promising composition was found to be the BCP scaffold doped with strontium (Sr2+), magnesium (Mg2+) and zinc (Zn2+) (BCP-6Sr2Mg2Zn). Then, samples from the BCP-6Sr2Mg2Zn were coated with poly(Ô-caprolactone) (PCL) or poly(ester urea) (PEU). The results showed that hUC-MSCs can differentiate into osteoblasts, and hUC-MSCs seeded on the PEU-coated scaffolds proliferated well, adhered to the scaffold surfaces, and enhanced their differentiation capabilities without negative effects on cell proliferation under in vitro conditions. Overall, these results suggest that PEU-coated scaffolds are an alternative to PCL for use in bone regeneration, providing a suitable environment to maximally induce osteogenesis.
RESUMO
Recently, highly stretchable and tough hydrogels that are photodegradable on-demand have been reported. Unfortunately, the preparation procedure is complex due to the hydrophobic nature of the photocrosslinkers. Herein, a simple method is reported to prepare photodegradable double-network (DN) hydrogels that exhibit high stretchability, toughness, and biocompatibility. Hydrophilic ortho-nitrobenzyl (ONB) crosslinkers incorporating different poly(ethylene glycol) (PEG) backbones (600, 1000, and 2000 g mol-1 ) are synthesized. These photodegradable DN hydrogels are prepared by the irreversible crosslinking of chains by using such ONB crosslinkers, and the reversible ionic crosslinking between sodium alginate and divalent cations (Ca2+ ). Remarkable mechanical properties are obtained by combining ionic and covalent crosslinking and their synergistic effect, and by reducing the length of the PEG backbone. The rapid on-demand degradation of these hydrogels is also demonstrated by using cytocompatible light wavelength (λ = 365 nm) that degrades the photosensitive ONB units. The authors have successfully used these hydrogels as skin-worn sensors for monitoring human respiration and physical activities. A combination of excellent mechanical properties, facile fabrication, and on-demand degradation holds promise for their application as the next generation of substrates or active sensors eco-friendly for bioelectronics, biosensors, wearable computing, and stretchable electronics.
Assuntos
Hidrogéis , Polietilenoglicóis , Humanos , Hidrogéis/química , Polietilenoglicóis/química , Alginatos/química , Interações Hidrofóbicas e Hidrofílicas , ÍonsRESUMO
BACKGROUND AND PURPOSE: Incongruent beliefs about self-localization in space markedly disturb patients' behavior. Spatial delusions, or reduplicative paramnesias, are characterized by a firm conviction of place reduplication, transformation, or mislocation. Evidence suggests they are frequent after right hemisphere lesions, but comprehensive information about their clinical features is lacking. METHODS: We prospectively screened 504 acute right-hemisphere stroke patients for the presence of spatial delusions. Their behavioral and clinical features were systematically assessed. Then, we analyzed the correlation of their duration with the magnitude of structural disruption of belief-associated functional networks. Finally, we described the syndrome subtypes and evaluated whether the clinical categorization would be predicted by the structural disruption of familiarity-associated functional networks using an unsupervised k-means clustering algorithm. RESULTS: Sixty patients with spatial delusions were identified and fully characterized. Most (93%) localized the misidentified places closer to home than the hospital. The median time duration was 3 days (interquartile range = 1-7 days), and it was moderately correlated with the magnitude of structural-functional decoupling of belief-associated functional networks (r = 0.39, p = 0.02; beta coefficient regressing for lesion volume = 3.18, p = 0.04). Each clinical subtype had characteristic response patterns, which were reported, and representative examples were provided. Clustering based on structural disruption of familiarity- and unfamiliarity-associated functional networks poorly matched the clinical categorization (lesion: Rand index = 0.47; structural disconnection: Rand index = 0.51). CONCLUSIONS: The systematic characterization of the peculiar clinical features of stroke-associated spatial delusions may improve the syndrome diagnosis and clinical approaches. The novel evidence about their neural correlates fosters the clarification of the pathophysiology of delusional misidentifications.
Assuntos
Delusões , Acidente Vascular Cerebral , Humanos , Delusões/etiologia , Acidente Vascular Cerebral/complicações , Acidente Vascular Cerebral/diagnóstico por imagem , Transtornos da Memória/complicações , Reconhecimento PsicológicoRESUMO
Poly(2,5-furandicarboxylate)s incorporating aliphatic moieties represent a promising family of polyesters, typically entirely based on renewable resources and with tailored properties, notably degradability. This study aims to go beyond by developing poly(isosorbide 2,5-furandicarboxylate-co-dodecanedioate) copolyesters derived from isosorbide (Is), 2,5-furandicarboxylic acid (FDCA), and 1,12-dodecanedioic acid (DDA), and studying their degradation under environmental conditions, often overlooked, namely seawater conditions. These novel polyesters have been characterized in-depth using ATR-FTIR, 1H, and 13C NMR and XRD spectroscopies and thermal analysis (TGA and DSC). They showed enhanced thermal stability (up to 330 °C), and the glass transition temperature increased with the content of FDCA from ca. 9 to 60 °C. Regarding their (bio)degradation, the enzymatic conditions lead to the highest weight loss compared to simulated seawater conditions, with values matching 27% vs. 3% weight loss after 63 days of incubation, respectively. Copolymerization of biobased FDCA, Is, and DDA represents an optimal approach for shaping the thermal/(bio)degradation behaviors of these novel polyesters.
RESUMO
We present for the first time highly stretchable and tough hydrogels with controlled light-triggered photodegradation. A double-network of alginate/polyacrylamide (PAAm) is formed by using covalently and ionically crosslinked subnetworks. The ionic Ca2+ alginate interpenetrates a PAAm network covalently crosslinked by a bifunctional acrylic crosslinker containing the photodegradable o-nitrobenzyl (ONB) core instead of the commonly used methylene bisacrylamide (MBAA). Remarkably, due to the developed protocol, the change of the crosslinker did not affect the hydrogel's mechanical properties. The incorporation of photosensitive components in hydrogels allows external temporal control of their properties and tuneable degradation. Cell viability and cell proliferation assays revealed that hydrogels and their photodegradation products are not cytotoxic to the NIH3T3 cell line. In one example of application, we used these hydrogels for bio-potential acquisition in wearable electrocardiography. Surprisingly, these hydrogels showed a lower skin-electrode impedance, compared to the common medical grade Ag/AgCl electrodes. This work lays the foundation for the next generation of tough and highly stretchable hydrogels that are environmentally friendly and can find applications in a variety of fields such as health, electronics, and energy, as they combine excellent mechanical properties with controlled degradation.
RESUMO
Additive Manufacturing (AM) technologies are an effective route to fabricate tailor made scaffolds for tissue engineering (TE) and regenerative medicine, with microstereo-lithography (µSLA) being one of the most promising techniques to produce high quality 3D structures. Here, we report the crosslinking studies of fully biobased unsaturated polyesters (UPs) with 2-hydroxyethyl methacrylate (HEMA) as the unsaturated monomer (UM), using thermal and µSLA crosslinking processes. The resulting resins were fully characterized in terms of their thermal and mechanical properties. Determination of gel content, water contact angle, topography and morphology analysis by atomic force microscopy and scanning electron microscopy were also performed. The results show that the developed UP resins (UPRs) have promising properties for µSLA.In vitrocytotoxicity assays performed with 3T3-L1 cell lines showed that the untreated scaffolds exhibited a maximum cellular viability around 60%, which was attributed to the acidic nature of the UPRs. The treatment of the UPRs and scaffolds with ethanol (EtOH) improved the cellular viability to 100%. The data presented in this manuscript contribute to improve the performance of biobased UPs in AM.
Assuntos
Metacrilatos , Estereolitografia , Alicerces Teciduais/química , Células 3T3-L1 , Animais , Materiais Biocompatíveis/química , Materiais Biocompatíveis/toxicidade , Sobrevivência Celular/efeitos dos fármacos , Reagentes de Ligações Cruzadas , Metacrilatos/química , Metacrilatos/toxicidade , Camundongos , Engenharia Tecidual/métodosRESUMO
Interpretation of space is an important determinant of human behaviour. Delusions of space, or reduplicative paramnesias, are a particularly disturbing form of spatial disorientation characterized by the patients' strong belief of place reduplication, transformation or mislocation. Their occurrence following focal brain damage provides a unique opportunity to unveil the structural-functional basis of space misinterpretations. First, we identified reports of lesion-associated reduplicative paramnesias with brain images available through a systematic review of the literature (n = 24). Each lesion was matched with 4 stroke controls and the sample was randomly split in an exploratory (n = 60) and in a validation (n = 60) dataset. Second, we used 178 7T tractographies to compute structural disconnectome maps and analysed lesion topography and disconnection patterns. Delusions of space were significantly associated with structural disconnection of right ventrolateral prefrontal and right temporal regions, and this finding was replicated in the validation sample. Third, we performed a functional meta-analysis of syndrome-related terms. We demonstrated that the structural disconnectomes of delusions of space were spatially correlated with the functional meta-analytic maps of familiarity and place, and replicated the previous evidence that the lesion topography maps are spatially correlated with belief-related functional networks. No association was found with control terms. These results reveal that structural disconnection putatively mediates functional changes associated with reduplicative paramnesias and provide a possible neural basis for the content specificity for places that characterizes these delusional beliefs.
Assuntos
Encéfalo , Delusões , Encéfalo/diagnóstico por imagem , Humanos , Transtornos da Memória , Testes Neuropsicológicos , Reconhecimento PsicológicoRESUMO
In this work, hydroxypropyl cellulose esters (HPCE) with long aliphatic chains were prepared and innovatively used in electrospinning to obtain hydroxypropyl cellulose (HPC)-based mats with enhanced resistance to moist environments. The described approach is very simple and does not require any post-treatment (e.g. cross-linking step) to overcome a major problem concerning the premature loss of properties of cellulose-based materials when in contact with moisture. HPCE-based electrospun mats were characterized in terms of their morphology, swelling ability and in vitro hydrolytic degradation. The mats exhibited a swelling capacity of over 115%, depending on the degree of substitution. The in vitro hydrolytic degradation tests showed the high structural integrity of the mats (< 5% weight loss) over a period of 30 days. The in vitro cytotoxicity tests showed that the mats of HPC esters are cytocompatible and promote the adhesion, proliferation and spreading of NIH3T3 fibroblast cells. These data suggest that the HPCE mats may be interesting materials for wound dressings, as well as for other tissue engineering applications.
Assuntos
Nanofibras , Animais , Bandagens , Celulose/análogos & derivados , Camundongos , Células NIH 3T3RESUMO
Biocompatible hydrogels are exciting platforms that have stood out in recent years for their outstanding potential for biomedical applications. For these applications, the ability of the material to respond to an external stimulus can be a relevant addition. This responsiveness allows the material to modify its physical properties in such a way that it can deliver molecules that support the healing process or allow easy removal of the films from the tissue. Among the polymers used to produce these systems, polyurethane (PU) and polyurethane-urea (PUU) are some of the most cited examples. In this work, a new hydrogel-sensitive PUU film is proposed. These films are prepared from polyethylene glycol (PEG) and contain a ROS-responsive telechelic ß-aminoacrylate bond. The hydrogel films showed interesting mechanical and thermal properties, good water uptake and low cytotoxicity, which makes them suitable for biomedical applications. More importantly, the hydrogel films exhibited a light-degradable profile through an innovative ROS-mediated cleavage process, as indicated by the loss of mechanical properties.
Assuntos
Hidrogéis , Ureia , Metilgalactosídeos , PolietilenoglicóisRESUMO
The present study deals with the development of multifunctional biphasic calcium phosphate (BCP) scaffolds coated with biopolymers-poly(ε-caprolactone) (PCL) or poly(ester urea) (PEU)-loaded with an antibiotic drug, Rifampicin (RFP). The amounts of RFP incorporated into the PCL and PEU-coated scaffolds were 0.55 ± 0.04 and 0.45 ± 0.02 wt%, respectively. The in vitro drug release profiles in phosphate buffered saline over 6 days were characterized by a burst release within the first 8h, followed by a sustained release. The Korsmeyer-Peppas model showed that RFP release was controlled by polymer-specific non-Fickian diffusion. A faster burst release (67.33 ± 1.48%) was observed for the PCL-coated samples, in comparison to that measured (47.23 ± 0.31%) for the PEU-coated samples. The growth inhibitory activity against Escherichia coli and Staphylococcus aureus was evaluated. Although the RFP-loaded scaffolds were effective in reducing bacterial growth for both strains, their effectiveness depends on the particular bacterial strain, as well as on the type of polymer coating, since it rules the drug release behavior. The low antibacterial activity demonstrated by the BCP-PEU-RFP scaffold against E. coli could be a consequence of the lower amount of RFP that is released from this scaffold, when compared with BCP-PCL-RFP. In vitro studies showed excellent cytocompatibility, adherence, and proliferation of human mesenchymal stem cells on the BCP-PEU-RFP scaffold surface. The fabricated highly porous scaffolds that could act as an antibiotic delivery system have great potential for applications in bone regeneration and tissue engineering, while preventing bacterial infections.
RESUMO
OBJECTIVE: Knowing explicitly where we are is an interpretation of our spatial representations. Reduplicative paramnesia is a disrupting syndrome in which patients present a firm belief of spatial mislocation. Here, we studied the largest sample of patients with delusional misidentifications of space (ie, reduplicative paramnesia) after stroke to shed light on their neurobiology. METHODS: In a prospective, cumulative, case-control study, we screened 400 patients with acute right-hemispheric stroke. We included 64 cases and 233 controls. First, lesions were delimited and normalized. Then, we computed structural and functional disconnection maps using methods of lesion-track and network-mapping. The maps were compared, controlling for confounders. Second, we built a multivariate logistic model, including clinical, behavioral, and neuroimaging data. Finally, we performed a nested cross-validation of the model with a support-vector machine analysis. RESULTS: The most frequent misidentification subtype was confabulatory mislocation (56%), followed by place reduplication (19%), and chimeric assimilation (13%). Our results indicate that structural disconnection is the strongest predictor of the syndrome and included 2 distinct streams, connecting right fronto-thalamic and right occipitotemporal structures. In the multivariate model, the independent predictors of reduplicative paramnesia were the structural disconnection map, lesion sparing of right dorsal fronto-parietal regions, age, and anosognosia. Good discrimination accuracy was demonstrated (area under the curve = 0.80 [0.75-0.85]). INTERPRETATION: Our results localize the anatomic circuits that may have a role in the abnormal spatial-emotional binding and in the defective updating of spatial representations underlying reduplicative paramnesia. This novel data may contribute to better understand the pathophysiology of delusional syndromes after stroke. ANN NEUROL 2021;89:1181-1194.
Assuntos
Mapeamento Encefálico/métodos , Delusões/diagnóstico por imagem , Delusões/etiologia , Acidente Vascular Cerebral/complicações , Acidente Vascular Cerebral/diagnóstico por imagem , Idoso , Idoso de 80 Anos ou mais , Estudos de Casos e Controles , Delusões/patologia , Feminino , Humanos , Interpretação de Imagem Assistida por Computador/métodos , Imageamento por Ressonância Magnética , Masculino , Estudos Prospectivos , Acidente Vascular Cerebral/patologia , Máquina de Vetores de Suporte , Tomografia Computadorizada por Raios X/métodosRESUMO
OBJECTIVE: To assess the association between migraine and cryptogenic ischemic stroke (CIS) in young adults, with subgroup analyses stratified by sex and presence of patent foramen ovale (PFO). METHODS: We prospectively enrolled 347 consecutive patients aged 18 to 49 years with a recent CIS and 347 age- and sex-matched (±5 years) stroke-free controls. Any migraine and migraine with (MA) and migraine without aura (MO) were identified by a screener, which we validated against a headache neurologist. We used conditional logistic regression adjusting for age, education, hypertension, diabetes, waist-to-hip ratio, physical inactivity, current smoking, heavy drinking, and oral estrogen use to assess independent association between migraine and CIS. The effect of PFO on the association between migraine and CIS was analyzed with logistic regression in a subgroup investigated with transcranial Doppler bubble screen. RESULTS: The screener performance was excellent (Cohen kappa > 0.75) in patients and controls. Compared with nonmigraineurs, any migraine (odds ratio [OR] = 2.48, 95% confidence interval [CI] = 1.63-3.76) and MA (OR = 3.50, 95% CI = 2.19-5.61) were associated with CIS, whereas MO was not. The association emerged in both women (OR = 2.97 for any migraine, 95% CI = 1.61-5.47; OR = 4.32 for MA, 95% CI = 2.16-8.65) and men (OR = 2.47 for any migraine, 95% CI = 1.32-4.61; OR = 3.61 for MA, 95% CI = 1.75-7.45). Specifically for MA, the association with CIS remained significant irrespective of PFO. MA prevalence increased with increasing magnitude of the right-to-left shunt in patients with PFO. INTERPRETATION: MA has a strong association with CIS in young patients, independent of vascular risk factors and presence of PFO. ANN NEUROL 2021;89:242-253.
Assuntos
AVC Isquêmico/epidemiologia , Enxaqueca com Aura/epidemiologia , Enxaqueca sem Aura/epidemiologia , Adulto , Consumo de Bebidas Alcoólicas/epidemiologia , Estudos de Casos e Controles , Diabetes Mellitus/epidemiologia , Escolaridade , Feminino , Forame Oval Patente/epidemiologia , Fatores de Risco de Doenças Cardíacas , Humanos , Hipertensão/epidemiologia , Modelos Logísticos , Masculino , Pessoa de Meia-Idade , Transtornos de Enxaqueca/epidemiologia , Obesidade/epidemiologia , Comportamento Sedentário , Fatores Sexuais , Fumar/epidemiologia , Relação Cintura-Quadril , Adulto JovemRESUMO
The development of targeted delivery systems can improve the selectivity of cancer drugs. Additionally, a system that promotes the controlled delivery of the drug triggered by an external stimulus in the exact target tissue is highly desirable. Regarding the light stimulus, the NIR window (650-950 nm) is the most suitable due to its higher capacity of penetration in human tissues and less harmful effects on normal cells. In this work, new red-light-responsive nanoparticles for doxorubicin delivery were developed. The nanoparticles were based on cleavable di-block copolymers of poly(ethylene glycol) (PEG) and poly(lactic acid) (PLA) linked by a red-light sensitive segment (1,2-bis(2-hydroxyethylthio)ethylene, BHETE). The PEG-BHETE-PLA copolymers were synthesized under mild conditions and exhibited a narrow polydispersity. The nanoparticles presented a size between 53 and 133 nm, with a doxorubicin loading capacity between 1.2 and 4.4 wt%. Release study of the encapsulated doxorubicin confirms the light-triggered nanoparticle disassembly process. In vitro cytotoxicity tests in MCF7 cell line, for the light-triggered nanoparticles, showed a decrease in cancer cells' viability higher than 25% compared to non-irradiated cells. Due to the promising results obtained with the light-sensitive PEG-BHETE-PLA nanoparticles, these materials have great potential to be used in drug delivery systems for cancer therapy.
Assuntos
Nanopartículas , Neoplasias , Portadores de Fármacos , Sistemas de Liberação de Medicamentos , Humanos , Neoplasias/tratamento farmacológico , Tamanho da Partícula , Polietilenoglicóis , PolímerosRESUMO
Degeneration of articular cartilage (AC) is a common healthcare issue that can result in significantly impaired function and mobility for affected patients. The avascular nature of the tissue strongly burdens its regenerative capacity contributing to the development of more serious conditions such as osteoarthritis. Recent advances in bioprinting have prompted the development of alternative tissue engineering therapies for the generation of AC. Particular interest has been dedicated to scaffold-based strategies where 3D substrates are used to guide cellular function and tissue ingrowth. Despite its extensive use in bioprinting, the application of polycaprolactone (PCL) in AC is, however, restricted by properties that inhibit pro-chondrogenic cell phenotypes. This study proposes the use of a new bioprintable poly(ester urea) (PEU) material as an alternative to PCL for the generation of an in vitro model of early chondrogenesis. The polymer was successfully printed into 3D constructs displaying adequate substrate stiffness and increased hydrophilicity compared to PCL. Human chondrocytes cultured on the scaffolds exhibited higher cell viability and improved chondrogenic phenotype with upregulation of genes associated with type II collagen and aggrecan synthesis. Bioprinted PEU scaffolds could, therefore, provide a potential platform for the fabrication of bespoke, pro-chondrogenic tissue engineering constructs.
RESUMO
Adhesives and sealants (AS) are materials with excellent properties, versatility, and simple curing mechanisms, being widely used in different areas ranging from the construction to the medical sectors. Due to the fast-growing demand for petroleum-based products and the consequent negative environmental impact, there is an increasing need to develop novel and more sustainable sources to obtain raw materials (monomers). This reality is particularly relevant for AS industries, which are generally dependent on non-sustainable fossil raw materials. In this respect, biopolymers, such as cellulose, starch, lignin, or proteins, emerge as important alternatives. Nevertheless, substantial improvements and developments are still required in order to simplify the synthetic routes, as well as to improve the biopolymer stability and performance of these new bio-based AS formulations. This environmentally friendly strategy will hopefully lead to the future partial or even total replacement of non-renewable petroleum-based feedstock. In this brief overview, the general features of typical AS are reviewed and critically discussed regarding their drawbacks and advantages. Moreover, the challenges faced by novel and more ecological alternatives, in particular lignocellulose-based solutions, are highlighted.
RESUMO
Cuttlefish bone (CB) has been explored as biomaterial in the bone tissue-engineering field due to its unique porous structure and capacity of the aragonite mineral to be hydrothermally converted into calcium phosphates (CaPs). In the present study, undoped and ion (Sr2+, Mg2+ and/or Zn2+) doped biphasic calcium phosphate (BCP) scaffolds were prepared by hydrothermal transformation (HT, 200⯰C, 24â¯h) of CB. The obtained scaffolds were sintered and then coated with two commercial polymers, poly(ε-caprolactone) (PCL) or poly(DL-lactide) (PDLA), and with two synthesized ones, a poly(ester amide) (PEA) or a poly(ester urea) (PEU) in order to improve their compressive strength. The scaffolds were characterized by X-ray diffraction (XRD) coupled with structural Rietveld refinement, Fourier transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM). The results demonstrate that CB could be entirely transformed into BCPs in the presence or absence of doping elements. The initial CB structure was preserved and the polymeric coatings did not jeopardize the interconnected porous structure. Furthermore, the polymeric coatings enhanced the compressive strength of the scaffolds. The in vitro bio-mineralization upon immersing the scaffolds into simulated body fluid (SBF) demonstrated the formation of bone-like apatite surface layers in both uncoated and coated scaffolds. Overall, the produced scaffolds exhibit promising properties for bone tissue engineering applications.
Assuntos
Osso e Ossos/química , Fosfatos de Cálcio/farmacologia , Materiais Revestidos Biocompatíveis/farmacologia , Decapodiformes/anatomia & histologia , Polímeros/farmacologia , Alicerces Teciduais/química , Animais , Osso e Ossos/ultraestrutura , Calcificação Fisiológica , Força Compressiva , Módulo de Elasticidade , Porosidade , Espectroscopia de Infravermelho com Transformada de Fourier , Propriedades de Superfície , Temperatura , Difração de Raios XRESUMO
The current research reports for the first time the use of blends of poly(ε-caprolactone) (PCL) and poly(ester amide) (PEA) for the fabrication of 3D additive manufactured scaffolds. Tailor made PEA was synthesized to afford fully miscible blends of PCL and PEA using different percentages (5, 10, 15 and 20% w/w). Stability, characteristic temperatures and material's compatibility were studied through thermal analyses (i.e., TGA, DSC). Even though DMTA and static compression tests demonstrated the possibility to improve the storage modulus, Young's modulus and maximum stress by increasing the amount of PEA, a decrease of hardness was found beyond a threshold concentration of PEA as the lowest values were achieved for PCL/PEA (20% w/w) scaffolds (from 0.39⯱â¯0.03â¯GPa to 0.21⯱â¯0.02â¯GPa in the analysed load range). The scaffolds presented a controlled morphology and a fully interconnected network of internal channels. The water contact angle measurements showed a clear increase of hydrophilicity resulting from the addition of PEA. This result was further corroborated with the improved adhesion and proliferation of human mesenchymal stem cells (hMSCs). The presence of PEA also influenced the cell morphology. Better cell spreading and a much higher and homogenous number of cells were observed for PCL/PEA scaffolds when compared to PCL ones.
Assuntos
Poliésteres/química , Engenharia Tecidual/métodos , Alicerces Teciduais/química , Varredura Diferencial de Calorimetria , Força Compressiva , Análise Diferencial Térmica , Humanos , Células-Tronco Mesenquimais/citologia , Nanopartículas/química , Poliésteres/síntese química , Impressão Tridimensional , Estresse Mecânico , Temperatura , Termogravimetria , Água/químicaRESUMO
Over the past ten years, the global biopharmaceutical market has remarkably grown, with ten over the top twenty worldwide high performance medical treatment sales being biologics. Thus, biotech R&D (research and development) sector is becoming a key leading branch, with expanding revenues. Biotechnology offers considerable advantages compared to traditional therapeutic approaches, such as reducing side effects, specific treatments, higher patient compliance and therefore more effective treatments leading to lower healthcare costs. Within this sector, smart nanotechnology and colloidal self-assembling systems represent pivotal tools able to modulate the delivery of therapeutics. A comprehensive understanding of the processes involved in the self-assembly of the colloidal structures discussed therein is essential for the development of relevant biomedical applications. In this review we report the most promising and best performing platforms for specific classes of bioactive molecules and related target, spanning from siRNAs, gene/plasmids, proteins/growth factors, small synthetic therapeutics and bioimaging probes.