A Modular Albumin-Oligonucleotide Biomolecular Assembly for Delivery of Antisense Therapeutics.

Antisense nucleic acid drugs are susceptible to nuclease degradation, rapid renal clearance, and short circulatory half-life. In this work, we introduce a modular-based recombinant human albumin-oligonucleotide (rHA-cODN) biomolecular assembly that allows incorporation of a chemically stabilized therapeutic gapmer antisense oligonucleotide (ASO) and FcRn-driven endothelial cellular recycling. A phosphodiester ODN linker (cODN) was conjugated to recombinant human albumin (rHA) using maleimide chemistry, after which a complementary gapmer ASO, targeting ADAMTS5 involved in osteoarthritis pathogenesis, was annealed. The rHA-cODN/ASO biomolecular assembly production, fluorescence labeling, and purity were confirmed using polyacrylamide gel electrophoresis. ASO release was triggered by DNase-mediated degradation of the linker strand, reaching 40% in serum after 72 h, with complete release observed following 30 min of incubation with DNase. Cellular internalization and trafficking of the biomolecular assembly using confocal microscopy in C28/I2 cells showed higher uptake and endosomal localization by increasing incubation time from 4 to 24 h. FcRn-mediated cellular recycling of the assembly was demonstrated in FcRn-expressing human microvascular endothelial cells. ADAMTS5 in vitro silencing efficiency reached 40%, which was comparable to free gapmer after 72 h incubation with human osteoarthritis patients' chondrocytes. This work introduces a versatile biomolecular modular-based "Plug-and-Play" platform potentially applicable for albumin-mediated half-life extension for a range of different types of ODN therapeutics.

Assessing the osseointegration potential of a strontium releasing nanostructured titanium oxide surface: A biomechanical study in the rabbit tibia plateau model.

OBJECTIVES: To investigate the impact of a Ti-Sr-O technology, applied to either a turned surface or an SLA surface, on the mechanical robustness of osseointegration, benchmarked against the SLActive surface. MATERIAL AND METHODS: Ti discs (6.25-mm-diameter and 2-mm-thick) with three different surfaces were inserted on the proximal-anterior part of the tibial plateau of adult Swedish loop rabbits: (I) turned surface modified with Ti-Sr-O (turned + Ti-Sr-O), (II) SLA surface modified with Ti-Sr-O (SLA + Ti-Sr-O), and (III) SLActive surface (SLActive). Following a healing period of 2 weeks and 4 weeks, the pull-out (PO) force needed to detach the discs from the bone was assessed, as a surrogate of osseointegration. RESULTS: The SLActive surface exhibited statistically significant higher median PO forces, compared with the SLA + Ti-Sr-O surfaces at both 2- and 4 weeks post-op (p > .05). In this study, no single turned + Ti-Sr-O surface disk was integrated. CONCLUSIONS: The tested Ti-Sr-O technology failed to enhance osseointegration; however, this finding may be related to the inappropriateness of the rabbit tibia plateau model for assessing third-generation implant surface technologies, due to the limited diffusion and clearance at the disk-bone interface.

Protein ligand and nanotopography separately drive the phenotype of mouse embryonic stem cells.

Biochemical and biomechanical signals regulate stem cell function in the niche environments in vivo. Current in vitro culture of mouse embryonic stem cells (mESC) uses laminin (LN-511) to provide mimetic biochemical signaling (LN-521 for human systems) to maintain stemness. Alternative approaches propose topographical cues to provide biomechanical cues, however combined biochemical and topographic cues may better mimic the in vivo environment, but are largely unexplored for in vitro stem cell expansion. In this study, we directly compare in vitro signals from LN-511 and/or topographic cues to maintain stemness, using systematically-varied submicron pillar patterns or flat surfaces with or without preadsorbed LN-511. The adhesion of cells, colony formation, expression of the pluripotency marker,octamer-binding transcription factor 4 (Oct4), and transcriptome profiling were characterized. We observed that either biochemical or topographic signals could maintain stemness of mESCs in feeder-free conditions, indicated by high-level Oct4 and gene profiling by RNAseq. The combination of LN-511 with nanotopography reduced colony growth, while maintaining stemness markers, shifted the cellular phenotype indicating that the integration of biochemical and topographic signals is antagonistic. Overall, significantly faster (up to 2.5 times) colony growth was observed at nanotopographies without LN-511, suggesting for improved ESC expansion.

Comment on "Which fraction of stone wool fibre surface remains uncoated by binder? A detailed analysis by time-of-flight secondary ion mass spectrometry and X-ray photoelectron spectroscopy" by Hirth et al., 2021, RSC Adv., 11, 39545, DOI: 10.1039/d1ra06251d.

The article mentioned in the title of this comment paper reports on an investigation of the organic binder presence and distribution on stone wool fibres with surface sensitive techniques (X-ray photoelectron spectroscopy (XPS), QUASES XPS modelling, time-of-flight secondary ion mass spectrometry (ToF-SIMS) mapping) and attempts to correlate the results with fibre performance in in vitro acellular biosolubility tests. However, the study has assumptions, hypothesis and results that do not take into account the recognised science and regulations on biopersistence of stone wool fibres, limitations of the utilized surface sensitive techniques and modelling approach and it contains a contradiction with biosolubility experiments. In this comment article, we discuss these points, propose improved QUASES XPS modelling and present recent ToF-SIMS mapping results that reflect biosolubility behaviour of the stone wool fibres.

Surfaces Coated with Polymer Brushes Work as Carriers for Histidine Ammonia Lyase.

The immobilization of enzymes on solid supports is an important challenge in biotechnology and biomedicine. In contrast to other methods, enzyme deposition in polymer brushes offers the benefit of high protein loading that preserves enzymatic activity in part due to the hydrated 3D environment that is available within the brush structure. The authors equipped planar and colloidal silica surfaces with poly(2-(diethylamino)ethyl methacrylate)-based brushes to immobilize Thermoplasma acidophilum histidine ammonia lyase, and analyzed the amount and activity of the immobilized enzyme. The poly(2-(diethylamino)ethyl methacrylate) brushes are attached to the solid silica supports either via a "grafting-to" or a "grafting-from" method. It is found that the grafting-from method results in higher amounts of deposited polymer and, consequently, higher amounts of Thermoplasma acidophilum histidine ammonia lyase. All polymer brush-modified surfaces show preserved catalytic activity of the deposited Thermoplasma acidophilum histidine ammonia lyase. However, immobilizing the enzyme in polymer brushes using the grafting-from method resulted in twice the enzymatic activity from the grafting-to approach, illustrating a successful enzyme deposition on a solid support.

Local Release of Strontium from Sputter-Deposited Coatings at Implants Increases the Strontium-to-Calcium Ratio in Peri-implant Bone.

It is well known that strontium (Sr) has a significant effect on peri-implant bone healing when administered systemically. Due to the risk of adverse effects of such treatments, new routes focusing on the local, sustained release of Sr from bone-implant contact surfaces have been explored, with success in in vivo experiments. However, the increase of Sr concentrations in the peri-implant bone has not been described in depth yet. Here, we show that a local, sustained Sr release from Ti-Sr-O physical vapor deposition (PVD) coatings by magnetron sputter coating increases the Sr/Ca ratio close to the implant in a rabbit model and that the Sr/Ca background level is reached approximately 500 µm from the implant.

Post-treatments of polydopamine coatings influence cellular response.

Polydopamine (PDA) is the final oxidation product of dopamine or other catecholamines. Since the first reports of PDA coatings starting around 2007, these coatings have been widely studied as a versatile and inexpensive one-step coating option for biomaterial functionalization. The coating attach to a wide range of materials and can subsequently be modified with biomolecules or nanoparticles. However, as a strong candidate for biomaterial research and even clinical use, it is important to unravel the changes in physico-chemical properties and the cell-PDA interaction as a function of heat sterilization procedures and shelf storage periods. Four groups were examined in this study: titanium (Ti), PDA-coated Ti samples and PDA-coated Ti samples either stored for up to two weeks at room temperature or heated at 121 °C for 24 h, respectively. We used X-ray Photoelectron Spectroscopy (XPS), Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) and Water contact angle (WCA) to characterize chemical composition and surface properties of the groups. Cell adhesion and proliferation was examined by three different cell types: human primary dermal fibroblasts (hDF), human epidermal keratinocytes (HaCaTs) and a murine preosteoblastic cell line (MC3T3-E1), respectively. Cells were cultured on PDA coated samples for 4 h, 3 days and 5 days. Both thermal treatment of PDA at 121℃ for 24 h and storage of the samples for 2 weeks increased the amount of quinone groups at the surface and decreased the amount of primary amine groups as detected by XPS and ToF-SIMS. Even though these surface reactions increased the WCA of the PDA coating, we found that the post-treatments increased cell proliferation for both hDFs, HaCaTs and MC3T3-E1 s as compared to pristine PDA. This emphasizes the importance of post-treatment and shelf-time for PDA coatings.

Surface polymerization induced locomotion.

Nano- and micromotors are self-navigating particles that gain locomotion using fuel from the environment or external power sources to outperform Brownian motion. Herein, motors that make use of surface polymerization of hydroxyethylmethylacrylate to gain locomotion are reported, synthetically mimicking microorganisms' way of propulsion. These motors have enhanced Brownian motion with effective diffusion coefficients up to ∼0.5 µm2 s-1 when mesoporous Janus particles are used. Finally, indication of swarming is observed when high numbers of motors homogenously coated with atom-transfer radical polymerization initiators are used, while high-density Janus motors lost their ability to exhibit enhanced Brownian motion. This report illustrates an alternative route to self-propelled particles, employing a polymerization process that has the potential to be applied for various purposes benefiting from the tool box of modern polymer chemistry.

Strontium enhances proliferation and osteogenic behavior of bone marrow stromal cells of mesenchymal and ectomesenchymal origins in vitro.

Obejective: To investigate the effect of increasing Strontium (Sr) concentrations on the growth and osteogenic behavior of human bone marrow stromal cells (BMSCs) from mesenchymal (i.e., fibula) and ectomesenchymal (i.e., mandible) embryonic origins. Materials and methods: Fibula and mandible BMSCs were cultured in media without (Ctrl) or with Sr in four diverse concentrations: Sr1, 11.3 × 10-3 mg/L, human seric physiological level; Sr2, 13 mg/L, human seric level after strontium ranelate treatment; Sr3, 130 mg/L, and Sr4, 360 mg/L. Proliferation rate (1, 3, and 7 days), osteogenic behavior (alkaline phosphatase [ALP] activity, 7 and 14 days; expression of osteogenic genes (ALP, osteopontin, and osteocalcin at 7, 14, and 21 days), and formation of mineralized nodules (14 and 21 days) of the BMSCs were assessed. Data was compared group- and period-wise using analysis of variance tests. Results: Fibula and mandible BMSCs cultured with Sr4 showed increased proliferation rate, and osteocalcin and osteopontin gene expression together with more evident formation of mineralized nodules, compared all other Sr concentrations. For both cell populations, Sr4 led to lower ALP activity, and ALP gene expression, compared with the other Sr concentrations. Conclusion: BMSCs from mesenchymal (i.e., fibula) and ectomesenchymal (i.e., mandible) embryonic origins showed increased cellular proliferation and osteogenic behavior when cultured with Sr4, in vitro.

Loading deproteinized bovine bone with strontium enhances bone regeneration in rat calvarial critical size defects.

OBJECTIVE: To evaluate the effect of grafting with strontium (Sr)-loaded deproteinized bovine bone (DBB) on bone healing in calvarial critical size defects (CSD) in rats. MATERIAL AND METHODS: Two circular bone defects (5 mm in diameter) were created in the calvaria of 42 rats. One of the defects, randomly chosen, was grafted with (a) DBB, (b) DBB loaded with 19.6 µg/g of Sr (DBB/Sr1), or (c) DBB loaded with 98.1 µg/g of Sr (DBB/Sr2). The other defect was left empty as negative control. Groups of seven animals from each of the groups were euthanized 15 and 60 days post-op. Bone healing in the CSD was evaluated by micro-CT and histology/histomorphometry and immunohistochemistry. RESULTS: DBB/Sr2-grafted sites showed statistically significantly shorter radiographic residual defect length compared with DBB/Sr1- and DBB-grafted sites, and with empty controls at 60 days. Further, the amount of new bone formation in the DBB/Sr1- and DBB/Sr2-grafted sites was significantly higher compared with that in the DBB-grafted sites at 60 days. A larger number of DBB/Sr1- and DBB/Sr2-grafted sites presented with no- or only limited to mild inflammation, compared with the DBB-grafted sites, especially at 60 days. Higher expression of osteocalcin was observed in DBB/Sr1- and DBB/Sr2-grafted sites as compared to DBB-grafted sites. CONCLUSION: Grafting with Sr-loaded DBB enhanced bone formation in CSD in rats, when compared with grafting with non-loaded DBB. CLINICAL RELEVANCE: Grafting with Sr-loaded DBB may enhance bone formation in bone defects.

Strontium enhances proliferation and osteogenic behavior of periodontal ligament cells in vitro.

BACKGROUND AND OBJECTIVE: Strontium (Sr) enhances osteogenic differentiation of certain multipotent cells. Periodontal ligament cells (PDLCs) are known to be multipotent, and Sr might be useful in periodontal bone tissue engineering. This study investigates the effect of high concentration of Sr on the proliferation and osteogenic behavior of PDLCs in vitro. MATERIAL AND METHODS: Primary human PDLCs were cultured in MEM + 10% FBS without (Ctrl) or with Sr in four diverse concentrations: Sr1, 11.3 × 10-3  mg/L, human serum physiological level; Sr2, 13 mg/L, typical human serum level after strontium ranelate treatment; Sr3, 130 mg/L, and Sr4, 360 mg/L. The spreading area (2, 4, 6, 24 hours), proliferation rate (1, 3, 7 days), osteogenic behavior (alkaline phosphatase - ALP activity, 7 and 14 days; expression of osteogenic genes, ALP, Runt-related transcription factor 2 - RUNX2, osteopontin - OPN, osteocalcin - OCN, and osteoprotegerin -OPG, 1, 3, 7, 14, 21 days), and formation of mineralized nodules (14 and 21 days) of the PDLCs were assessed. Data were compared group- and period-wise using ANOVA tests. RESULTS: Periodontal ligament cells cultured with Sr4 showed increased spreading area (after 4 hours), proliferation rate (from 3 days), and OCN and OPN (from 7 days) gene expression as compared to Ctrl, Sr1, Sr2, and Sr3. Sr4 also led to lower ALP activity (from 7 days), ALP (from 3 days), and RUNX2 (at 7 and 14 days) gene expression, together with more evident formation of mineralized nodules, compared to Ctrl, Sr1, Sr2, and Sr3. CONCLUSION: Periodontal ligament cells responded to Sr4 with increased cellular proliferation and osteogenic behavior in vitro.

Surface chemistry, substrate, and topography guide the behavior of human articular chondrocytes cultured in vitro.

Understanding the behavior of chondrocytes in contact with artificial culture surfaces is becoming increasingly important in attaining appropriate ex vivo culture conditions of chondrocytes in cartilage regeneration. Chondrocyte transplantation-based cartilage repair requires efficiently expanded chondrocytes, and the culture surface plays an important role in guiding the behavior of the cell. Micro- and nano-engineered surfaces make it possible to modulate cell behavior. We hypothesized that the combined influence of topography, substrate, and surface chemistry may affect the chondrocyte culturing in terms of proliferation and phenotypic means. Human chondrocytes were cultured on polystyrene fabricated microstructures, flat polydimethylsiloxane (PDMS), or polystyrene treated with fibronectin or oxygen plasma and cultured for 1, 4, 7, and 10 days. The behavior of chondrocytes was evaluated by proliferation, viability, chondrogenic gene expression, and cell morphology. Contrary to our hypothesis, microstructures in polystyrene did not significantly influence the behavior of chondrocytes neither under normoxic- nor hypoxic conditions. However, changes in the substrate stiffness and surface chemistry were found to influence cell viability, gene expression, and morphology of human chondrocytes. Oxygen plasma treatment was the most important parameter followed by the softer substrate type PDMS. The findings indicate the culture of human chondrocytes on softer substratum and surface activation by oxygen plasma may prevent dedifferentiation and may improve chondrocyte transplantation-based cartilage repair. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2805-2816, 2018.

A comparative in vivo study of strontium-functionalized and SLActive™ implant surfaces in early bone healing.

PURPOSE: Studies have shown that strontium-doped medical applications benefit bone metabolism leading to improved bone healing and osseointegration. Based on this knowledge, the aim of the study was to evaluate the performance of an implant surface, functionalized by a physical vapor deposition (PVD) coating (Ti-Sr-O), designed to yield predictable release of strontium. The Ti-Sr-O functionalized surface is compared to a routinely used, commercially available surface (SLActive™) with respect to bone-to-implant contact (BIC%) and new bone formation (BF%) in two defined regions of interest (ROI-I and ROI-II, respectively). MATERIALS AND METHODS: Ti-Sr-O functionalized, SLActive, and Grade 4 titanium implants were inserted in the femoral condyle of adult male New Zealand White rabbits. The PVD magnetron-sputtered Ti-Sr-O surface coating was characterized using scanning electron microscopy (SEM) for morphology and coating thickness. Strontium release and mechanical stability of the coating, under simulated insertion conditions, were evaluated. Furthermore, histomorphometrical BIC and BF were carried out 2 weeks after insertion. RESULTS: Histomorphometry revealed increased bone formation of Ti-Sr-O with significant differences compared to SLActive and Grade 4 titanium in both regions of interest, ROI-I and ROI-II, at 0-250 µm and 250-500 µm distance from the implant surfaces. Analogous results of bone-to-implant contact were observed for the two modified surfaces. CONCLUSION: The results show that a nanopatterned Ti-Sr-O functionalized titanium surface, with sustained release of strontium, increases peri-implant bone volume and could potentially contribute to enhancement of bone anchorage of osseointegrated implants.

Comparing the effect of strontium-functionalized and fluoride-modified surfaces on early osseointegration.

BACKGROUND: Studies have shown that medical devices comprising strontium contribute to bone healing and osseointegration. The aim of this study was to evaluate the in vivo performance of surface-functionalized implants (Ti-Sr-O) showing predictable release characteristics of strontium and compare it to performance a commercially available fluoride-modified surface. METHODS: Ti-Sr-O functionalized, fluoride-modified,  Grade 4 titanium implants were inserted in the femoral condyle of adult male New Zealand white rabbits. Atomic absorption spectrometry (AAS) was utilized to monitor strontium blood serum levels. Two weeks after insertion, histomorphometric evaluation was performed with respect to bone-to-implant contact (BIC%) and bone formation (BF%) using defined regions of interest. RESULTS: Mean values for BIC% showed a comparable degree of osseointegration for Ti-Sr-O and the fluoride-modified surface, while BF% revealed a significant difference in increased BF with Ti-Sr-O. AAS measurements did not indicate any influence of the Ti-Sr-O modified implants on the strontium blood serum concentrations. CONCLUSIONS: Within the limitations of this study, it was shown that the Ti-Sr-O coating, with sustained release characteristics of strontium, enhanced bone apposition and, thus, could find practical applications, e.g., within the field of medical implantology.

Effect of strontium surface-functionalized implants on early and late osseointegration: A histological, spectrometric and tomographic evaluation.

Numerous in vivo, in vitro and clinical studies report on beneficial effects of strontium with respect to increased bone growth. Based on this knowledge the aim of this study was to evaluate early and late osseointegration stages of functionalized titanium implants showing sustained release of strontium (Sr) and further investigate its potential systemic effect. Strontium functionalized (Ti-Sr-O) and Grade 4 (Control) titanium implants were inserted in the femoral condyle of New Zealand White rabbits. The Ti-Sr-O coating was characterized using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectrometry (EDX) for structure, coating thickness and chemical composition. Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) was used to evaluate released strontium in vitro while Atomic Absorption Spectrometry (AAS) was utilized to monitor serum levels of strontium and calcium. Additionally, histological and tomographic analysis of bone-to-implant contact (BIC%) and bone formation (BF%) was performed, following implantation periods of two or twelve weeks, respectively. Median values for BIC% for Ti-Sr-O revealed significant differences within the two- and twelve-week observation periods, while exceeding BF% was discovered especially after twelve weeks when performing the histological evaluation. The results from the micro-computed tomography (µ-CT) showed no significant differences, when comparing the experimental groups. AAS measurements did not indicate a systemic effect by the local strontium release. Within the limitations of the study, it was shown that a Ti-Sr-O coating with sustained release characteristics of strontium, accelerates bone apposition and represents a potential potent surface modification for endosseous medical implant devices. STATEMENT OF SIGNIFICANCE: This study presents first data with respect to early and late in vivo response on a strontium functionalized titanium surface comprising a nanotopography manufactured by a magnetron sputtering process. We investigated different osseointegration stages of screw-shaped implants with dental implant geometries in a rabbit femur model observing beneficial effects of the functionalized surface on bone-to-implant contact and bone formation caused by tailored release of the bone anabolic strontium. Histomorphometrical data revealed that a functionalized titanium surface with controlled liberation of strontium accelerates osseointegration while spectrometry measurements did not indicate a potential systemic effect of this osteoinductive agent and could thus have impact on modifications of medical implant devices.

Bone regenerating effect of surface-functionalized titanium implants with sustained-release characteristics of strontium in ovariectomized rats.

Since strontium (Sr) is known for its anabolic and anticatabolic effect on bone, research has been focused on its potential impact on osseointegration. The objective of this study was to investigate the performance of nanotopographic implants with a Sr-functionalized titanium (Ti) coating (Ti-Sr-O) with respect to osseointegration in osteoporotic bone. The trial was designed to examine the effect of sustained-release characteristics of Sr in poor-quality bone. Three Ti-Sr-O groups, which differed from each other in coating thickness, Sr contents, and Sr release, were examined. These were prepared by a magnetron sputtering process and compared to uncoated grade 4 Ti. Composition, morphology, and mechanical stability of the coatings were analyzed, and Sr release data were gained from in vitro washout experiments. In vivo investigation was carried out in an osteoporotic rat model and analyzed histologically, 6 weeks and 12 weeks after implantation. Median values of bone-to-implant contact and new bone formation after 6 weeks were found to be 84.7% and 54.9% (best performing Sr group) as compared to 65.2% and 23.8% (grade 4 Ti reference), respectively. The 12-week observation period revealed 84.3% and 56.5% (best performing Sr group) and 81.3% and 39.4% (grade 4 Ti reference), respectively, for the same measurements. The increase in new bone formation was found to correlate with the amount of Sr released in vitro. The results indicate that sputtered nanostructured Ti-Sr-O coatings showed sustained release of Sr and accelerate osseointegration even in poor-quality bone, and thus, may have impact on practical applications for medical implants.

Combinatorial Biomolecular Nanopatterning for High-Throughput Screening of Stem-Cell Behavior.

A novel combinatorial biomolecular nanopatterning method is reported, in which multiple biomolecular ligands can be patterned in multiple nanoscale dimensions on a single surface. The applicability of the combinatorial platform toward cell-biology applications is demonstrated by screening the adhesion behavior of a population of human dental pulp stem cell (hDPSC) on 64 combinations of nanopatterned extracellular matrix (ECM) proteins in parallel.

Response of MG63 osteoblast-like cells to ordered nanotopographies fabricated using colloidal self-assembly and glancing angle deposition.

Ordered surface nanostructures have attracted much attention in different fields including biomedical engineering because of their potential to study the size effect on cellular response and modulation of cell fate. However, the ability to fabricate large-area ordered nanostructures is typically limited due to high costs and low speed of fabrication. Herein, highly ordered nanostructures with large surface areas (>1.5 × 1.5 cm(2)) were fabricated using a combination of facile techniques including colloidal self-assembly, colloidal lithography, and glancing angle deposition (GLAD). An ordered tantalum (Ta) pattern with 60-nm-height was generated using colloidal lithography. A monolayer of colloidal crystal, i.e., hexagonal close packed 720 nm polystyrene particles, was self-assembled and used as a mask. Ta patterns were subsequently generated by evaporation of Ta through the mask. The feature size was further increased by 100 or 200 nm using GLAD, resulting in the fabrication of four different surfaces (FLAT, Ta60, GLAD100, and GLAD200). Cell adhesion, proliferation, and mineralization of MG63 osteoblast-like cells were investigated on these ordered nanostructures over a 1 week period. Our results showed that cell adhesion, spreading, focal adhesion formation, and filopodia formation of the MG63 osteoblast-like cells were inhibited on the GLAD surfaces, especially the initial (24 h) attachment, resulting in a lower cell density on the GLAD surfaces. After 1 week culture, alkaline phosphatase activity and the amount of Ca was higher on the GLAD surfaces compared with Ta60 and FLAT controls, suggesting that the GLAD surfaces facilitate differentiation of osteoblasts. This study demonstrates that ordered Ta nanotopographies synthesized by combining colloidal lithography with GLAD can improve the mineralization of osteoblast-like cells providing a new platform for biomaterials and bone tissue engineering.

Topography-Guided Proliferation: Distinct Surface Microtopography Increases Proliferation of Chondrocytes In Vitro.

Chondrocyte-based cartilage repair techniques require control of articular chondrocyte expansion ex vivo. Articular chondrocytes have limited availability, and prolonged culturing to obtain a cell number sufficient for clinical use often results in phenotypic alterations and increased costs. In this study, we applied a screening library consisting of micrometer-sized topographical features, termed biosurface structure array (BSSA), to identify specific topographical microstructures affecting the proliferation of human chondrocytes in passage 1 (P1) or 2 (P2). The BSSA library comprised 10 patterns and 16 combinations of pillar size (X) and interpillar gap size (Y). Specific microstructures significantly increased the chondrocytes' proliferative responsiveness in term of patterns, X and Y for P2 compared with P1. The P1 and P2 chondrocytes responded independently to similar patterns after 4 days of culturing, whereas only chondrocytes at P2 responded to specific microstructures with Y = 1 µm and X = 2, 4 µm by a 2.3- and 4.4-fold increased proliferation, respectively. In conclusion, these findings indicate that specific surface topographies promote chondrocyte proliferation and may, indeed, be a tool to control the behavior of chondrocytes in vitro.

Isoeugenol has a non-disruptive detergent-like mechanism of action.

Isoeugenol is an essential oil constituent of nutmeg, clove, and cinnamon. Despite isoeugenol's promising antimicrobial activity, no studies have yet investigated its mode of antibacterial action at the molecular level. The aim of this study is to clarify isoeugenol's antibacterial mode of action using the Gram-negative and Gram-positive model organisms Escherichia coli and Listeria innocua, respectively. We determined the antimicrobial activity of isoeugenol against the model organisms, and examined how isoeugenol affects cell morphology, cell membrane permeabilization, and how isoeugenol interacts with phospholipid membranes using vesicle and supported lipid bilayer models. Isoeugenol demonstrated a bactericidal activity against E. coli and L. innocua that did not affect cell morphology, although the cell membrane was permeabilized. We hypothesized that the cell membrane was the primary site of action, and studied this interaction in further detail using purified membrane model systems. Isoeugenol's permeabilization of calcein-encapsulated vesicles was concentration dependent, and isoeugenol's interaction with giant unilamellar vesicles indicated increased membrane fluidity and a non-disruptive permeabilization mechanism. This contradicted membrane fluidity measurements on supported lipid bilayers (SLBs), which indicated decreased membrane fluidity. However, further investigations demonstrated that the interaction between isoeugenol and bilayers was reversible, and caused membranes to display heterogeneous topography, an increased mass, and a higher degree of hydration. In conclusion, we propose that isoeugenol interacts with membranes in a reversible non-disruptive detergent-like manner, which causes membrane destabilization. Furthermore, we argue that isoeugenol increases membrane fluidity. Our work contributes to the understanding of how essential oil constituents interact with cell components.