Stable high repetition-rate laser-driven proton beam production for multidisciplinary applications on the advanced laser light source ion beamline.

Laser-driven proton accelerators are relevant candidates for many applications such as material science or medicine. Today, there are multi-hundred-TW table-top laser systems that can generate relativistic peak intensities >1018 W/cm2 and routinely reach proton energies in the MeV range. However, for most desired applications, there is still a need to optimize the quality and stability of the laser-generated proton beam. In this work, we developed a 0.625 Hz high repetition-rate setup in which a laser with 2.5% RMS energy stability is irradiating a solid target with an intensity of 1019 to 1020 W/cm2 to explore proton energy and yield variations, both with high shot statistics (up to about 400 laser shots) and using different interaction targets. Investigating the above-mentioned parameters is important for applications that rely on specific parts of the proton spectrum or a high ion flux produced over quick multi-shot irradiation. We demonstrate that the use of a stable "multi-shot mode" allows improving applications, e.g., in the detection of trace elements using laser-driven particle-induced x-ray emission.

Tight-focusing parabolic reflector schemes for petawatt lasers.

A comparative study of three different tight-focusing schemes for high-power lasers is performed numerically. Using the Stratton-Chu formulation, the electromagnetic field in the vicinity of the focus is evaluated for a short-pulse laser beam incident upon an on-axis high numerical aperture parabola (HNAP), an off-axis parabola (OAP), and a transmission parabola (TP). Linearly- and radially-polarized incident beams are considered. It is demonstrated that while all the focusing configurations yield intensities above 1023 W/cm2 for a 1 PW incident beam, the nature of the focused field can be drastically modified. In particular, it is shown that the TP, with its focal point behind the parabola, actually converts an incoming linearly-polarized beam into an m = 2 vector beam. The strengths and weaknesses of each configuration are discussed in the context of future laser-matter interaction experiments. Finally, a generalization of NA calculations up to 4π-illumination is proposed through the solid angle formulation, providing a universal way to compare light cones from any kind of optics.

Femtosecond multimodal imaging with a laser-driven X-ray source.

Laser-plasma accelerators are compact linear accelerators based on the interaction of high-power lasers with plasma to form accelerating structures up to 1000 times smaller than standard radiofrequency cavities, and they come with an embedded X-ray source, namely betatron source, with unique properties: small source size and femtosecond pulse duration. A still unexplored possibility to exploit the betatron source comes from combining it with imaging methods able to encode multiple information like transmission and phase into a single-shot acquisition approach. In this work, we combine edge illumination-beam tracking (EI-BT) with a betatron X-ray source and present the demonstration of multimodal imaging (transmission, refraction, and scattering) with a compact light source down to the femtosecond timescale. The advantage of EI-BT is that it allows multimodal X-ray imaging technique, granting access to transmission, refraction and scattering signals from standard low-coherence laboratory X-ray sources in a single shot.

Combined laser-based X-ray fluorescence and particle-induced X-ray emission for versatile multi-element analysis.

Particle and radiation sources are widely employed in manifold applications. In the last decades, the upcoming of versatile, energetic, high-brilliance laser-based sources, as produced by intense laser-matter interactions, has introduced utilization of these sources in diverse areas, given their potential to complement or even outperform existing techniques. In this paper, we show that the interaction of an intense laser with a solid target produces a versatile, non-destructive, fast analysis technique that allows to switch from laser-driven PIXE (Particle-Induced X-ray Emission) to laser-driven XRF (X-ray Fluorescence) within single laser shots, by simply changing the atomic number of the interaction target. The combination of both processes improves the retrieval of constituents in materials and allows for volumetric analysis up to tens of microns and on cm2 large areas up to a detection threshold of ppms. This opens the route for a versatile, non-destructive, and fast combined analysis technique.

A K-alpha x-ray source using high energy and high repetition rate laser system for phase contrast imaging.

K-alpha x-ray sources from laser produced plasmas provide completely new possibilities for x-ray phase-contrast imaging applications. By tightly focusing intense femtosecond laser pulses onto a solid target K-alpha x-ray pulses are generated through the interaction of energetic electrons created in the plasma with the bulk target. In this paper, we present a continuous and efficient Mo K-alpha x-ray source produced by a femtosecond laser system operating at 100 Hz repetition rate with maximum pulse energy of 110 mJ before compression. The source has an x-ray conversion efficiency of greater than 10(-5) into K-alpha line emission. In preparation for phase contrast imaging applications, the size of the resultant K-alpha x-ray emission spot has been also characterized. The source exhibits sufficient spatial coherence to observe phase contrast. We observe a relatively small broadening of the K-alpha source size compared to the size of the laser beam itself. Detailed characterization of the source including the x-ray spectrum and the x-ray average yield along with phase contrast images of test objects will be presented.

Development of ultrafast laser-based x-ray in-vivo phase-contrast micro-CT beamline for biomedical applications at Advanced Laser Light Source (ALLS).

We are developing and exploring the imaging performance of, an in vivo, in-line holography, x-ray phase-contrast, micro-CT system with an ultrafast laser-based x-ray (ULX) source. By testing and refining our system, and by performing computer simulations, we plan to improve system performance in terms of contrast resolution and multi-energy imaging to a level beyond what can be obtained using a conventional microfocal x-ray tube. Initial CT projection sets at single energy (Mo K(alpha) and K(beta) lines) were acquired in the Fresnel regime and reconstructed for phantoms and a euthanized mouse. We also performed computer simulations of phase-contrast micro-CT scans for low-contrast, soft-tissue, tumor imaging. We determined that, in order to perform a phase-contrast, complete micro-CT scan using ULX, the following conditions must be met: (i) the x-ray source needs to be stable during the scan; (ii) the laser focal spot size needs to be less than 10 mum for source-to-object distance greater than 30 cm; (iii) the laser light intensity on the target needs to be in the range of 5 x 10(17) to 5 x 10(19) W/cm(2); (iv) the ablation protection system needs to allow uninterrupted scans; (v) the laser light focusing on the target needs to remain accurate during the entire scan; (vi) a fresh surface of the target must be exposed to consecutive laser shots during the entire scan; (vii) the effective detector element size must be less than 12 mum. Based on the results obtained in this research project, we anticipate that the new 10 Hz, 200 TW laser with 50 W average power that is being commissioned at ALLS will allow us practical implementation of in vivo x-ray phase-contrast micro-CT.

Soft tissue small avascular tumor imaging with x-ray phase-contrast micro-CT in-line holography.

To assess the feasibility of small soft tissue avascular tumor micro-CT imaging with x-ray phase-contrast in-line holography, we have studied micro-CT imaging with in-line geometry of small spheroidal avascular tumor models with quiescent cell core (< 250 mum) and various distributions of the proliferating cell density (PCD) forming the outer shell. We have simulated imaging with an ultrafast laser-based x-ray source with a Mo target. We observe phase-contrast enhancement of the tumor boundaries in the reconstructed transaxial images, resulting in improved detection of small soft tissue tumors, providing that the PCD density gradient is sufficiently large.