RESUMO
Site-specific installation of non-natural functionality onto proteins has enabled countless applications in biotechnology, chemical biology, and biomaterials science. Though the N-terminus is an attractive derivatization location, prior methodologies targeting this site have suffered from low selectivity, a limited selection of potential chemical modifications, and/or challenges associated with divergent protein purification/modification steps. In this work, we harness the atypically split VidaL intein to simultaneously N-functionalize and purify homogeneous protein populations in a single step. Our methodâreferred to as VidaL-tagged expression and protein ligation (VEPL)âenables modular and scalable production of N-terminally modified proteins with native bioactivity. Demonstrating its flexibility and ease of use, we employ VEPL to combinatorially install 4 distinct (multi)functional handles (e.g., biotin, alkyne, fluorophores) to the N-terminus of 4 proteins that span three different classes: fluorescent (Enhanced Green Fluorescent Protein, mCherry), enzymatic (ß-lactamase), and growth factor (epidermal growth factor). Moving forward, we anticipate that VEPL's ability to rapidly generate and isolate N-modified proteins will prove useful across the growing fields of applied chemical biology.
Assuntos
Inteínas , Proteínas de Fluorescência Verde/química , Proteínas de Fluorescência Verde/metabolismo , Proteínas de Fluorescência Verde/genética , beta-Lactamases/metabolismo , beta-Lactamases/química , Proteínas Luminescentes/química , Fator de Crescimento Epidérmico/metabolismo , Fator de Crescimento Epidérmico/química , Proteína Vermelha Fluorescente , Proteínas/químicaRESUMO
Obtaining the complex refractive index vectors n(ν~) and k(ν~) allows calculation of the (infrared) reflectance spectrum that is obtained from a solid in any of its many morphological forms. We report an adaptation to the KBr pellet technique using two gravimetric dilutions to derive quantitative n(ν~)/k(ν~) for dozens of powders with greater repeatability. The optical constants of bisphenol A and sucrose are compared to those derived by other methods, particularly for powdered materials. The variability of the k values for bisphenol A was examined by 10 individual measurements, showing an average coefficient of variation for k peak heights of 5.6%. Though no established standards exist, the pellet-derived k peak values of bisphenol A differ by 11% and 31% from their single-angle- and ellipsometry-derived values, respectively. These values provide an initial estimate of the precision and accuracy of complex refractive indices that can be derived using this method. Limitations and advantages of the method are discussed, the salient advantage being a more rapid method to derive n/k for those species that do not readily form crystals or specular pellets.
RESUMO
Stability of proteins at high temperature has been a topic of interest for many years, as this attribute is favourable for applications ranging from therapeutics to industrial chemical manufacturing. Our current understanding and methods for designing high-temperature stability into target proteins are inadequate. To drive innovation in this space, we have curated a large dataset, learn2thermDB, of protein-temperature examples, totalling 24 million instances, and paired proteins across temperatures based on homology, yielding 69 million protein pairs - orders of magnitude larger than the current largest. This important step of pairing allows for study of high-temperature stability in a sequence-dependent manner in the big data era. The data pipeline is parameterized and open, allowing it to be tuned by downstream users. We further show that the data contains signal for deep learning. This data offers a new doorway towards thermal stability design models.
Assuntos
Células Procarióticas , Estabilidade Proteica , Proteínas , TemperaturaRESUMO
BACKGROUND: Protein quality of the red kidney bean (RKB), a common source of dietary protein, has been assessed using the protein digestibility-corrected amino acid score (PDCAAS) determined in animal models using mainly oro-fecal digestibility. More recently, the FAO recommended to use digestible indispensable amino acid score (DIAAS) instead of PDCAAS but highlighted insufficient data on true ileal indispensable amino acid (IAA) digestibility of proteins because amino acids are absorbed in the ileum. OBJECTIVES: Using a recently developed dual stable isotope tracer method, we aimed to measure each IAA digestibility as representation of true ileal digestibility of the RKB, Phaseolus vulgaris, in humans consuming a typical Jamaican meal. METHODS: RKB-IAAs were intrinsically labeled by adding 2H2O to the plants. Uniformly labeled-[13C]-spirulina (standard protein) was added to a meal prepared with the labeled RKB and fed to 10 healthy adults (5 males, 5 females) in a nonrandomized trial as primed/intermittent doses to achieve a steady state IAA enrichment in plasma. Enrichment of 2H- and 13C-labeled IAA in plasma and the bean was measured by mass spectrometry. Each IAA digestibility (except tryptophan and histidine) was calculated as the ratio of plasma 2H-IAA to meal 2H-IAA divided by the ratio of plasma 13C-IAA to meal 13C-IAA adjusted for loss of 2H-atom during transamination and digestibility of spirulina. RESULTS: Adequate IAA labeling (>1000 ppm 2H excess) and plasma plateau isotopic enrichment were achieved. Mean RKB-IAA digestibility (%) was 79.4 ± 0.5, ranging from 69.0 ± 1.2 (threonine) to 85.7 ± 1.7 (lysine). CONCLUSION: The dual stable isotope tracer digestibility data are similar to published oro-fecal digestibility supporting substantial nitrogen exchange in the colon. The individual IAA digestibility is useful to derive DIAAS to replace PDCAAS. Using published RKB-IAA composition, extrapolated DIAAS was 0.63 based on the lowest score for methionine. CLINICAL TRIAL REGISTRATION: https://register. CLINICALTRIALS: gov; ID: NCT-04118517.
RESUMO
Efficient genome engineering is critical to understand and use microbial functions. Despite recent development of tools such as CRISPR-Cas gene editing, efficient integration of exogenous DNA with well-characterized functions remains limited to model bacteria. Here, we describe serine recombinase-assisted genome engineering, or SAGE, an easy-to-use, highly efficient, and extensible technology that enables selection marker-free, site-specific genome integration of up to 10 DNA constructs, often with efficiency on par with or superior to replicating plasmids. SAGE uses no replicating plasmids and thus lacks the host range limitations of other genome engineering technologies. We demonstrate the value of SAGE by characterizing genome integration efficiency in five bacteria that span multiple taxonomy groups and biotechnology applications and by identifying more than 95 heterologous promoters in each host with consistent transcription across environmental and genetic contexts. We anticipate that SAGE will rapidly expand the number of industrial and environmental bacteria compatible with high-throughput genetics and synthetic biology.
Assuntos
Sistemas CRISPR-Cas , Engenharia Genética , Edição de Genes , Bactérias/genética , DNARESUMO
There is a growing interest in the development of technologies to probe and direct in vitro cellular function for fundamental organoid and stem cell biology, functional tissue and metabolic engineering, and biotherapeutic formulation. Recapitulating many critical aspects of the native cellular niche, hydrogel biomaterials have proven to be a defining platform technology in this space, catapulting biological investigation from traditional two-dimensional (2D) culture into the 3D world. Seeking to better emulate the dynamic heterogeneity characteristic of all living tissues, global efforts over the last several years have centered around upgrading hydrogel design from relatively simple and static architectures into stimuli-responsive and spatiotemporally evolvable niches. Towards this end, advances from traditionally disparate fields including bioorthogonal click chemistry, chemoenzymatic synthesis, and DNA nanotechnology have been co-opted and integrated to construct 4D-tunable systems that undergo preprogrammed functional changes in response to user-defined inputs. In this Review, we highlight how advances in synthetic, semisynthetic, and bio-based chemistries have played a critical role in the triggered creation and customization of next-generation hydrogel biomaterials. We also chart how these advances stand to energize the translational pipeline of hydrogels from bench to market and close with an outlook on outstanding opportunities and challenges that lay ahead.
RESUMO
Programmable engineered tissues and the materials that support them are instrumental to the development of next-generation therapeutics and gaining new understanding of human biology. Toward these ends, recent years have brought a growing emphasis on the creation of "4D" hydrogel culture platforms-those that can be customized in 3D space and on demand over time. Many of the most powerful 4D-tunable biomaterials are photochemically regulated, affording users unmatched spatiotemporal modulation through high-yielding, synthetically tractable, and cytocompatible reactions. Precise physicochemical manipulation of gel networks has given us the ability to drive critical changes in cell fate across a diverse range of distance and time scales, including proliferation, migration, and differentiation through user-directed intracellular and intercellular signaling. This Account provides a survey of the numerous creative approaches taken by our lab and others to recapitulate the dynamically heterogeneous biochemistry underpinning in vivo extracellular matrix (ECM)-cell interactions via light-based network (de)decoration with biomolecules (e.g., peptides, proteins) and in situ protein activation/generation. We believe the insights gained from these studies can motivate disruptive improvements to emerging technologies, including low-variability organoid generation and culture, high-throughput drug screening, and personalized medicine. As photolithography and chemical modification strategies continue to mature, access to and control over new and increasingly complex biological pathways are being unlocked. The earliest hydrogel photopatterning efforts selectively encapsulated bioactive peptides and drugs into rudimentary gel volumes. Through continued exploration and refinement, next-generation materials now boast reversible, multiplexed, and/or Boolean logic-based biomolecule presentation, as well as functional activation at subcellular resolutions throughout 3D space. Lithographic hardware and software technologies, particularly those enabling image-guided patterning, allow researchers to precisely replicate complex biological structures within engineered tissue environments. The advent of bioorthogonal click chemistries has expanded 4D tissue engineering toolkits, permitting diverse constructs to be independently customized in the vicinity of any cell that is amenable to hydrogel-based culture. Additionally, the adoption of modern protein engineering techniques including genetic code expansion and chemoenzymatic alteration provides a roadmap toward site-specific modification of nearly any recombinant or isolated protein, affording installation of photoreactive and click handles without sacrificing their bioactivity. While the established bind, release, (de)activate paradigm in hydrogel photolithography continues to thrive alongside these modern engineering techniques, new studies are also demonstrating photocontrol of more complex or nonclassical operations, including engineered material-microorganism interfaces and functional protein photoassembly. Such creative approaches offer exciting new avenues for the field, including spatial control of on-demand biomolecule production from cellular depots and patterned bioactivity using a growing array of split protein pairs. Taken together, these technologies provide the foundation for truly biomimetic photopatterning of engineered tissues.
RESUMO
In situ remediation applications of ammonia (NH3) gas have potential for sequestration of subsurface contamination. Ammonia gas injections initially increase the pore water pH leading to mineral dissolution followed by formation of secondary precipitates as the pH is neutralized. However, there is a lack of understanding of fundamental alteration processes due to NH3 treatment. In these batch studies, phyllosilicate minerals (illite and montmorillonite) were exposed to NH3 gas with subsequent aeration to simulate in situ remediation. Following treatments, solids were characterized using a variety of techniques, including X-ray diffraction, N2 adsorption-desorption analysis for surface area, Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR), and microscopy methods to investigate physicochemical transformations. Results indicate that, at high pH, the clays are altered as observed by differences in morphology and particle size via microscopy. However, the two clays interact differently with NH3. While montmorillonite interlayers collapsed due to intercalation, illite layers were unaffected as confirmed by FTIR analysis. Further, structural changes in silicate ([SiO4]n-) and aluminol (Al-OH) groups were identified by NMR and FTIR. This research showed that mineral alteration processes occur during and after NH3 gas treatment which may be used to remove radionuclides from the aqueous phase through sorption, co-precipitation, and coating with secondary phyllosilicate alteration products.
RESUMO
The emergence of ambient ionization techniques and their combination with smaller, cheaper mass spectrometers is beginning to make real the possibility of mass spectrometry measurements being made routinely outside of traditional laboratory settings. Here, we describe the development of an atmospheric solids analysis probe (ASAP) source for a commercially available miniaturized, single-quadrupole mass spectrometer and subsequent modification of the instrument to allow it to run as a deployable system; we further go on to describe the application of this instrument to the identification of the contents of drug seizures. For the drug seizure analysis, a small quantity of the material (powder, tablet, resin, etc.) was dissolved in ethanol and shaken to extract the analytes, the resulting solutions were then sampled by dipping a sealed glass capillary into the solution prior to analysis by ASAP-MS. Identification of the contents of the seizures was carried out using a NIST searching approach utilizing a bespoke spectral library containing 46 compounds representative of those most commonly encountered in UK forensic laboratories. In order to increase confidence in identification the library sample and subsequent analyses were carried out using a four-channel acquisition method; each channel in this method used a different cone voltage (15, 30, 50, and 70 V) inducing differing levels of in-source fragmentation in each channel; the match score across each channel was then used for identification. Using this developed method, a set of 50 real-life drug samples was analyzed with each of these being identified correctly using the library searching method.
RESUMO
INTRODUCTION: Reductions in fibrinolytic potential occur with both aging and physical inactivity and are associated with an increased cardiovascular disease risk. Plasmin, the enzyme responsible for the enzymatic degradation of fibrin clots, is activated by tissue plasminogen activator (tPA), while plasminogen activator inhibitor-1 (PAI-1) inhibits its activation. Currently, fibrinolysis research focuses almost exclusively on changes within the plasma. However, tPA and PAI-1 are expressed by human skeletal muscle (SM). Currently, no studies have focused on changes in SM fibrinolytic activity with regard to aging and aerobic fitness. PURPOSE: The purpose of this study was to cross-sectionally evaluate effects of age and aerobic fitness on tPA and PAI-1 expressions and activity in SM. METHODS: Twenty-six male subjects were categorized into the following groups: (1) young aerobically trained (n = 8); (2) older aerobically trained (n = 6); (3) young aerobically untrained (n = 7); and (4) older aerobically untrained (n = 5). Muscle biopsies were obtained from each subject. SM tPA activity was assessed using gel zymography and SM tPA and PAI-1 expressions were assessed using RT-PCR. RESULTS: Trained subjects had higher SM tPA activity compared to untrained (25.3 ± 2.4 × 10(3) vs. 21.5 ± 5.6 × 10(3) pixels, respectively; p = 0.03) with no effect observed for age. VO2 max and SM tPA activity were also significantly correlated (r = 0.42; p < 0.04). SM tPA expression was higher in older participants, but no effect of fitness level was observed. No differences were observed for PAI-1 expression in SM. CONCLUSIONS: Higher levels of aerobic fitness are associated with increased fibrinolytic activity in SM.
Assuntos
Exercício Físico , Músculo Esquelético/fisiologia , Inibidor 1 de Ativador de Plasminogênio/metabolismo , Ativador de Plasminogênio Tecidual/metabolismo , Fatores Etários , Idoso , Estudos de Casos e Controles , Humanos , Masculino , Pessoa de Meia-Idade , Músculo Esquelético/metabolismo , Inibidor 1 de Ativador de Plasminogênio/sangue , Inibidor 1 de Ativador de Plasminogênio/genética , RNA Mensageiro/genética , RNA Mensageiro/metabolismo , Ativador de Plasminogênio Tecidual/sangue , Ativador de Plasminogênio Tecidual/genética , Adulto JovemRESUMO
In many small animals there are distinct differences in fiber-type composition among limb muscles, and these differences typically correspond to marked disparities in the oxidative capacities. However, whether there are similar differences in the oxidative capacity among leg muscles in humans is less clear. The purpose of this study was to compare the rate of phosphocreatine (PCr) recovery, a functional in vivo marker of oxidative capacity, in the lateral and medial gastrocnemius, soleus, and the anterior compartment of the leg (primarily the tibialis anterior) of humans. Subjects performed plantar flexion and dorsiflexion gated exercise protocols consisting of 70 sets of three rapid dynamic contractions (<2.86 s) at 20 s intervals (total: 23.3 min). Starting after the sixth set of contractions, (31)P 2-D CSI (8 x 8 matrix, 14-16 cm FOV, 3 cm slice, TR 2.86 s) were acquired via a linear transmit/receive surface coil using a GE 3T Excite System. The CSI data were zero-filled (32 x 32) and a single FID was produced for each time point in the lateral and medial gastrocnemius, soleus, and anterior compartment. The time constant for PCr recovery was calculated from tau = -Deltat/ln[D/(D + Q)], where Q is the percentage change in PCr due to contraction during the steady-state portion of the protocol, D the additional drop in PCr from rest, and Deltat is the interval between contractions. The tau of PCr recovery was longer (p < 0.05) in the anterior compartment (32 +/- 3 s) than in the lateral (23 +/- 2 s) and medial gastrocnemius muscles (24 +/- 3 s) and the soleus (22 +/- 3 s) muscles. These findings suggest that the oxidative capacity is lower in the anterior compartment than in the triceps surae muscles and is consistent with the notion that fiber-type phenotypes vary among the leg muscles of humans.