RESUMO
OBJECTIVE: This study compared three protocols for developing artificial white spot lesions (WSL) using biofilm models. METHODOLOGY: In total, 45 human enamel specimens were sterilized and allocated into three groups based on the biofilm model: Streptococcus sobrinus and Lactobacillus casei (Ss+Lc), Streptococcus sobrinus (Ss), or Streptococcus mutans (Sm). Specimens were incubated in filter-sterilized human saliva to form the acquired pellicle and then subjected to the biofilm challenge consisting of three days of incubation with bacteria (for demineralization) and one day of remineralization, which was performed once for Ss+Lc (four days total), four times for Ss (16 days total), and three times for Sm (12 days total). After WSL creation, the lesion fluorescence, depth, and chemical composition were assessed using Quantitative Light-induced Fluorescence (QLF), Polarized Light Microscopy (PLM), and Raman Spectroscopy, respectively. Statistical analysis consisted of two-way ANOVA followed by Tukey's post hoc test (α=0.05). WSL created using the Ss+Lc protocol presented statistically significant higher fluorescence loss (ΔF) and integrated fluorescence (ΔQ) in comparison to the other two protocols (p<0.001). RESULTS: In addition, Ss+Lc resulted in significantly deeper WSL (137.5 µm), followed by Ss (84.1 µm) and Sm (54.9 µm) (p<0.001). While high mineral content was observed in sound enamel surrounding the WSL, lesions created with the Ss+Lc protocol showed the highest demineralization level and changes in the mineral content among the three protocols. CONCLUSION: The biofilm model using S. sobrinus and L. casei for four days was the most appropriate and simplified protocol for developing artificial active WSL with lower fluorescence, higher demineralization, and greater depth.
Assuntos
Biofilmes , Cárie Dentária , Esmalte Dentário , Lacticaseibacillus casei , Streptococcus mutans , Humanos , Streptococcus mutans/fisiologia , Cárie Dentária/microbiologia , Cárie Dentária/terapia , Esmalte Dentário/microbiologia , Esmalte Dentário/química , Lacticaseibacillus casei/fisiologia , Fatores de Tempo , Reprodutibilidade dos Testes , Streptococcus sobrinus/fisiologia , Análise Espectral Raman , Análise de Variância , Microscopia de Polarização , Estatísticas não Paramétricas , Remineralização Dentária/métodos , Valores de Referência , Saliva/microbiologia , Saliva/química , Desmineralização do Dente/microbiologia , FluorescênciaRESUMO
Abstract Creating artificial caries-like lesions that mimic the complex changes observed in natural caries is essential for properly evaluating new strategies, dental materials, and devices designed to arrest their progression and avoid more costly and invasive treatments. Objective This study compared three protocols for developing artificial white spot lesions (WSL) using biofilm models. Methodology In total, 45 human enamel specimens were sterilized and allocated into three groups based on the biofilm model: Streptococcus sobrinus and Lactobacillus casei (Ss+Lc), Streptococcus sobrinus (Ss), or Streptococcus mutans (Sm). Specimens were incubated in filter-sterilized human saliva to form the acquired pellicle and then subjected to the biofilm challenge consisting of three days of incubation with bacteria (for demineralization) and one day of remineralization, which was performed once for Ss+Lc (four days total), four times for Ss (16 days total), and three times for Sm (12 days total). After WSL creation, the lesion fluorescence, depth, and chemical composition were assessed using Quantitative Light-induced Fluorescence (QLF), Polarized Light Microscopy (PLM), and Raman Spectroscopy, respectively. Statistical analysis consisted of two-way ANOVA followed by Tukey's post hoc test (α=0.05). WSL created using the Ss+Lc protocol presented statistically significant higher fluorescence loss (ΔF) and integrated fluorescence (ΔQ) in comparison to the other two protocols (p<0.001). Results In addition, Ss+Lc resulted in significantly deeper WSL (137.5 µm), followed by Ss (84.1 µm) and Sm (54.9 µm) (p<0.001). While high mineral content was observed in sound enamel surrounding the WSL, lesions created with the Ss+Lc protocol showed the highest demineralization level and changes in the mineral content among the three protocols. Conclusion The biofilm model using S. sobrinus and L. casei for four days was the most appropriate and simplified protocol for developing artificial active WSL with lower fluorescence, higher demineralization, and greater depth.
RESUMO
OBJECTIVES: To evaluate biocorrosion and eccentric occlusal loading interplay in marginal quality of cervical restorations. METHODS: Cervical wedge-shaped cavities were prepared in extracted premolars and restored with a composite. Premolars underwent either an erosive challenge (E: 1% citric acid/10 min), eccentric occlusal loading (EOL: 150 N/2.5 Hz/106 cycles), E before EOL (E + EOL), E intermediate to EOL (EOL/E/EOL), E after EOL (EOL + E), or no E or EOL (C: control). Marginal quality was analyzed based on a series of Optical Coherence Tomography images. Each of the margins was assigned a gap score (0, 1, 2, or 3) and measurement (µm). For each margin, scores data were analyzed with Kruskall Wallis and Dunn tests, and µm data, with Kruskall Wallis. Overall and for each group, the different margins were compared using Wilcoxon signed-rank test, and the correlation between scores and µm, Spearman's correlation coefficient (α = 0.05). RESULTS: E and EOL, even if associated, did not influence enamel marginal quality. EOL/E/EOL impaired dentin/cementum marginal quality only in the case of scores and compared to E. E + EOL, EOL + E or EOL and even C, without differences between each other, did not influence results differently from E or EOL/E/EOL. Margins in dentin/cementum always showed lengthier gaps. Except for C, E and EOL + E cervical margin, there was a strong positive correlation between scores and µm. CONCLUSIONS: Eccentric occlusal loading and/or biocorrosion cannot be assumed as causes of marginal failure of cervical restorations in wedge-shaped cavities. A relevant concern may still be the establishment of adhesive interfaces in dentin/cementum. CLINICAL SIGNIFICANCE: Although non-carious cervical lesions are strongly being recognized multifactorial and their respective restorations not always behave as expected, biocorrosion and eccentric occlusal loading interplay cannot serve as an explanation for marginal gaps they often present.
Assuntos
Adesivos , Resinas Compostas , Dente Pré-Molar , Restauração Dentária Permanente , Cimentos de ResinaRESUMO
Objective: To compare optical, morphological, chemical, and physical aspects of the sound enamel and white spot lesions (WSL) classified as ICDAS 2. Material and Methods: Seventeen human molars with one surface presenting WSL and a sound surface (2 x 2 mm window) were characterized by Quantitative light-induced fluorescence (QLF ®), Optical coherence tomography (OCT), microhardness, and Raman spectroscopy. The ANOVA and Tukey's test were used at 5% significance level. Results: The QLF comparison between distinct substrates yielded decreased ∆Q (integrated fluorescence loss) of -15,37%mm2 and -11,68% ∆F (fluorescence loss) for WSL. The OCT detected mean lesion depth of 174,43 µm. ANOVA could not detect differences in the optical attenuation coefficient between the substrates (p>0.05). Lower microhardness measures were observed in WSL than on sound enamel (p<0.05). The Raman spectra showed four vibrational phosphate bands (v1, v2, v3, v4), where the highest peak was at 960.3 cm-1(v1) for both substrates. However, a 40% decrease in phosphate (v1) was detected in WSL. The peak at 1071 cm-1 was higher for sound enamel, indicating the presence of a phosphate band instead of the B-type carbonate. The spectra showed higher intensity of the organic composition at 1295 cm-1 and 1450 cm -1 for WSL. Conclusion: Non-invasive QLF, OCT and Raman spectroscopy were able to distinguish differences in fluorescence, optical properties, and organic/inorganic components, respectively, between sound enamel and WSL, validated by the destructive microhardness analysis. (AU)
Objetivo: Comparar os aspectos ópticos, morfológicos, químicos e físicos do esmalte sadio e das lesões de mancha branca naturais, classificada como ICDAS 2. Material e métodos: Dezessete molares humanos com uma face apresentando uma lesão de mancha branca natural e outra face o esmalte hígido (2 x 2 mm) foram caracterizados utilizando a Fluorescência quantitativa induzida pela luz (QLF ®), Tomografia de coerência óptica (OCT), Microdureza e Espectroscopia Raman. A ANOVA e o teste de Tukey foram utilizados ao nível de significância de 5%. Resultados: A comparação entre os substratos distintos, utilizando o QLF ® demonstrou uma diminuição no ∆Q (perda de fluorescência integrada) de -15,37%mm2 e -11,68% de ∆F (Perda de fluorescência) para a lesão de mancha branca. O OCT detectou uma profundidade média de lesão de 174,43µm. A ANOVA não detectou diferenças no coeficiente de atenuação óptica entre os substratos (>0,05). Microdureza significantemente menor foi detectada nas lesões de mancha branca do que no esmalte sadio (p<0,05). Os espectros Raman mostraram quatro bandas vibracionais do fosfato (v1,v2,v3,v4), onde o maior pico foi em 960,3cm-1para ambos os substratos. No entanto, uma diminuição de 40% no fosfato (v1) foi detectada na lesão. O pico em 1071cm-1foi maior para o esmalte hígido, demonstrando tratar-se da banda do fosfato, ao invés do carbonato tipo B. Os espectros apresentaram maior intensidade da composição orgânica em 1295cm-1e 1450 cm-1para a lesão de mancha branca. Conclusão:Os métodos não invasivos QLF, OCT e espectroscopia Raman foram capazes dediferenciar a fluorescência, propriedades ópticas e conteúdo orgânico/inorgânico do esmalte sadio comparado com esmalte com lesões de mancha branca, sendo validado pela análise de microdureza. (AU)
Assuntos
Análise Espectral Raman , Cárie Dentária , Esmalte Dentário , DiagnósticoRESUMO
OBJECTIVE: This in vitro study characterized and monitored, by Optical Coherence Tomography (OCT) and Fourier Transformed Infrared Spectroscopy (FTIR), the effects of the association of acidulated phosphate fluoride gel (APF-gel) and Nd:YAG (neodymiun:yttrium-aluminum-garnet) laser, as sequencial treatments, in the prevention of incipient enamel caries lesions. METHODS: 120 human enamel samples were randomized into 3 groups (n = 40): APF-gel (1.23% F-, 4 min.); Laser+APF (Nd:YAG laser irradiation-0.6W, 84.9J/cm2, 10Hz, followed by APF-gel); and APF+Laser (APF-gel followed by laser irradiation). The samples were subjected to a 15-day pH-cycling, evaluated by OCT (quantification of optical attenuation coefficient-OAC) and FTIR (analysis of carbonate and phosphate content) before treatments, after treatments, and on the 5th, 10th and 15th days of pH-cycling. The statistical analysis was performed (α = 5%). RESULTS: The Optical Attenuation Coefficient (OAC) assessed by OCT increases with the progression of demineralization, and the Laser+APF presented the highest values of OAC in 10th and 15th days of pH-cycling. Nd:YAG decreased the carbonate content after treatment regardless of the application order of the APF-gel, while APF-gel did not interfere in the composition of enamel. The carbonate content was also changed in the first 5 days of the pH-cycling in all groups. CONCLUSION: Nd:YAG laser irradiation before or after the application of APF-gel did not influence the appearance of incipient caries lesions, showing no synergistic effect. Regardless of the application order of the APF-gel, laser irradiation reduces the carbonate content of the enamel, which also changes during the demineralization process. However, irradiation before the application of APF-gel increased the speed of progression of the lesions, which positively impacts public health as it can prevent caries disease, even in high risk individuals. OCT and FTIR are suitable for assessing this effect.
Assuntos
Fluoreto de Fosfato Acidulado/administração & dosagem , Cárie Dentária/prevenção & controle , Fluoretos/administração & dosagem , Suscetibilidade à Cárie Dentária/fisiologia , Humanos , Lasers de Estado Sólido/uso terapêutico , Microscopia Eletrônica de Varredura/métodos , Espectroscopia de Infravermelho com Transformada de Fourier/métodos , Tomografia de Coerência Óptica/métodos , Desmineralização do Dente/prevenção & controle , Erosão Dentária/prevenção & controleRESUMO
The treatment of high-risk patients still is a challenge. The understanding and development non-invasive, non-destructive, and non-ionizing techniques, can help to guide the treatment and the diagnosis of primary and recurrent caries. The present study evaluated the behavior of enamel/restoration interface after a cariogenic challenge by Fourier domain optical coherence tomography (FD-OCT), scanning electron microscopy (SEM) examination, and the fluoride release of the different restorative materials. Cavities (1.5 × 0.5 mm) were performed in enamel surface and divided into groups (n = 8): glass ionomer cement (GIC), resin-modified glass ionomer cement (RMGIC), and resin composite (RC). The samples were submitted to pH-cycling, and the solutions analyzed for cumulative fluoride by ion-analyzer. The morphology was analyzed by SEM through replicas. The optical attenuation coefficient (OAC) was calculated through exponential decay from the images generated by FD-OCT. Data were analyzed considering α = 0.05. OAC values increased for all groups after pH-cycling indicating demineralization (p < .05). Considering the remineralizing solution, RMGIC presented higher fluoride release rate, followed by GIC, while RC did not release any fluoride. Yet for the demineralizing solution, RMGIC and GIC released similar fluoride rates, overcoming RC (p < .05). Micrographs revealed no changes on the restorations margins, although enamel detachment was observed for RC and GIC after pH-cycling.
Assuntos
Cárie Dentária , Desmineralização do Dente , Resinas Compostas , Cárie Dentária/terapia , Restauração Dentária Permanente , Fluoretos , Cimentos de Ionômeros de Vidro , Humanos , Microscopia Eletrônica de Varredura , Cimentos de ResinaRESUMO
PURPOSE: To combine advances in high-speed, wide-field optical coherence tomography angiography (OCTA) with image processing methods for semiautomatic quantitative analysis of capillary nonperfusion in patients with diabetic retinopathy (DR). METHODS: Sixty-eight diabetic patients (73 eyes), either without retinopathy or with different degrees of retinopathy, were prospectively recruited for volumetric swept-source OCTA imaging using 12 mm × 12 mm fields centered at the fovea. A custom, semiautomatic software algorithm was used to quantify areas of capillary nonperfusion. RESULTS: The mean percentage of nonperfused area was 0.1% (95% confidence interval: 0.0-0.4) in the eyes without DR; 2.1% (95% confidence interval: 1.2-3.7) in the nonproliferative DR eyes (mild, moderate, and severe), and 8.5% (95% confidence interval: 5.0-14.3) in the proliferative DR eyes. The percentage of nonperfused area increased in a statistically significant manner from eyes without DR, to eyes with nonproliferative DR, to eyes with proliferative DR. CONCLUSION: Capillary nonperfusion area in the posterior retina increases with increasing DR severity as measured by swept-source OCTA. Quantitative analysis of retinal nonperfusion on wide-field OCTA may be useful for early detection and monitoring of disease in patients with diabetes and DR.
Assuntos
Diabetes Mellitus Tipo 2/complicações , Retinopatia Diabética/diagnóstico , Angiofluoresceinografia/métodos , Fluxo Sanguíneo Regional/fisiologia , Vasos Retinianos/patologia , Tomografia de Coerência Óptica/métodos , Capilares/patologia , Retinopatia Diabética/etiologia , Retinopatia Diabética/fisiopatologia , Feminino , Seguimentos , Fundo de Olho , Humanos , Masculino , Pessoa de Meia-Idade , Vasos Retinianos/fisiopatologia , Estudos RetrospectivosRESUMO
The recent clinical adoption of optical coherence tomography (OCT) angiography (OCTA) has enabled non-invasive, volumetric visualization of ocular vasculature at micron-scale resolutions. Initially limited to 3 mm × 3 mm and 6 mm × 6 mm fields-of-view (FOV), commercial OCTA systems now offer 12 mm × 12 mm, or larger, imaging fields. While larger FOVs promise a more complete visualization of retinal disease, they also introduce new challenges to the accurate and reliable interpretation of OCTA data. In particular, because of vignetting, wide-field imaging increases occurrence of low-OCT-signal artifacts, which leads to thresholding and/or segmentation artifacts, complicating OCTA analysis. This study presents theoretical and case-based descriptions of the causes and effects of low-OCT-signal artifacts. Through these descriptions, we demonstrate that OCTA data interpretation can be ambiguous if performed without consulting corresponding OCT data. Furthermore, using wide-field non-perfusion analysis in diabetic retinopathy as a model widefield OCTA usage-case, we show how qualitative and quantitative analysis can be confounded by low-OCT-signal artifacts. Based on these results, we suggest methods and best-practices for preventing and managing low-OCT-signal artifacts, thereby reducing errors in OCTA quantitative analysis of non-perfusion and improving reproducibility. These methods promise to be especially important for longitudinal studies detecting progression and response to therapy.
Assuntos
Angiografia , Artefatos , Tomografia de Coerência Óptica , Humanos , Processamento de Imagem Assistida por Computador , Razão Sinal-RuídoRESUMO
This study was designed to investigate whether there is a correlation between the findings of optical coherence tomography (OCT) and polarized light microscopy (PLM) when these techniques are used to evaluate standard enamel white-spot lesions developed by distinct cariogenic challenges. Bovine enamel fragments (N = 168) were randomly allocated into 6 experimental groups according to the microbiologic model (Streptococcus mutans UA159, Streptococcus sobrinus ATCC 33478, or mixed S mutans and S sobrinus) and carbohydrate sources (1% sucrose or combined 1% sucrose and 1% starch). Specimens were examined by OCT and PLM every day within a period of 7 days. Five measurements of demineralization depth were recorded for each specimen, and means were calculated. Data were analyzed with analysis of variance and Tukey tests (α = 0.05), and a correlation test was performed. All cariogenic challenges created sub-superficial lesions. In both the OCT and PLM analyses, the demineralization depth reached its peak between days 6 and 7 of the cariogenic challenge, except for the group challenged with S sobrinus supplemented with combined sucrose and starch; for that group, demineralization peaked on day 5 in the OCT analysis. There was a significant correlation between OCT and PLM (P = 0.00; r = 0.842). This preliminary study suggests that OCT is a reliable, nondestructive method to measure the demineralization depth of enamel white-spot lesions, which can be useful for the laboratory and has potential for clinical studies. Using the 1% sucrose and S mutans model for 6 days is a simple and effective method to induce enamel caries-like lesions without compromising the depth and morphologic features of the obtained lesions.
Assuntos
Cárie Dentária , Microscopia de Polarização/métodos , Tomografia de Coerência Óptica/métodos , Desmineralização do Dente , Animais , Bovinos , Cárie Dentária/diagnóstico , Esmalte Dentário , HumanosRESUMO
Thousands of people die every year from burn injuries. The aim of this study is to evaluate the feasibility of high intensity femtosecond lasers as an auxiliary treatment of skin burns. We used an in vivo animal model and monitored the healing process using 4 different imaging modalities: histology, Optical Coherence Tomography (OCT), Second Harmonic Generation (SHG), and Fourier Transform Infrared (FTIR) spectroscopy. 3 dorsal areas of 20 anesthetized Wistar rats were burned by water vapor exposure and subsequently treated either by classical surgical debridement, by laser ablation, or left without treatment. Skin burn tissues were non-invasively characterized by OCT images and biopsied for further histopathology analysis, SHG imaging and FTIR spectroscopy at 3, 5, 7 and 14 days after burn. The laser protocol was found as efficient as the classical treatment for promoting the healing process. The study concludes to the validation of femtosecond ultra-short pulses laser treatment for skinburns, with the advantage of minimizing operatory trauma.
RESUMO
BACKGROUND: Antimicrobial photodynamic therapy (aPDT) has been used as an adjuvant treatment for periodontitis. It combines a photosensitizer with a light source to induce reactive oxygen species and kill microbial cells. PpNetNI is a protoporphyrin derivative, and it has a chemical binding site at biofilm and great affinity to microbial cells. The aim of this study was to investigate the effects of aPDT as an adjuvant treatment for periodontitis. METHODS: Thirty healthy male rats Wistar (Rattus norvegicus) were used in this study (Approved by UNINOVE Ethical committee AN0029/2015). Periodontitis was induced by placing a cotton ligature around the first mandibular molar in a subgengival position. The contralateral mandibular first molar received neither a ligature nor any treatment, and was used as a control. After 7 days, the ligature was removed and all animals received scaling and root planing (SRP) and were divided according to the following treatments: SRP group (received SRP and irrigation with PpNetNI, 10µM) and aPDT group (PpNetNI 10µM followed by LED irradiation). aPDT was performed with a LED (630nm) with an output power of 400mW (fluence-rate 200mW/cm2; fluence 18J/cm2). Rats were euthanized at 24h, 48h and 7days postoperatively. The area of bone loss in vestibular region of the first molar was evaluated by Optical Coherence Tomography (OCT, THORLABS LTD., Ely, UK). Data were analyzed statistically (ANOVA and Tukey tests, p<0.05). RESULTS: The animals treated by aPDT showed bone gain of approximately 30% compared to the SRP group following 7days from the treatment. CONCLUSION: aPDT promoted bone recovery 7days after periodontal intervention.
Assuntos
Raspagem Dentária/métodos , Modelos Animais de Doenças , Desinfecção/métodos , Periodontite/tratamento farmacológico , Periodontite/terapia , Fotoquimioterapia/métodos , Animais , Terapia Combinada/métodos , Masculino , Periodontite/patologia , Ratos , Ratos Wistar , Resultado do TratamentoRESUMO
This study aimed to use optical coherence tomography (OCT) to assess the progression of erosive lesions after irradiation with Nd:YAG laser and application of topical fluoride. One-hundred and twenty dentin samples (4 × 4 × 2 mm) obtained from bovine incisors were used. Samples were protected with acid-resistant nail varnish, with exception of a central circular area 2 mm in diameter. All samples were submitted to erosive cycles with citric acid solution 0.05 M (citric acid monohydrate-C6H8O7·H2O); M = 210.14 g/mol) pH 2.3, at room temperature, for 20 min, 2×/day, throughout 20 days. After 10 days of acid challenges, lesions became visible, and each group received a different treatment (n = 15): control (without treatment), topical application of sodium fluoride 2 % for 4 min; Nd:YAG laser with different irradiation parameters (1, 0.7, and 0.5 W); and the association of fluoride with the laser parameters. OCT readouts were performed on day 01 (before the first acid challenge-OCT1), on day 05 (OCT2), day 10 (OCT3-after treatment), day 15 (OCT4), day 17 (OCT5), and day 20 (OCT6). The OCT images generated made it possible to measure the amount of tooth tissue loss over the 20 days of erosive cycle, before and after treatments, and to monitor early dentin demineralization progression. After statistical analysis, the fluoride group was observed to be the one that showed smaller loss of tissue over time. The OCT technique is promising for diagnosing and monitoring erosive lesion damage; however, further in vitro and in vivo research is needed to improve its use.
Assuntos
Progressão da Doença , Fluoretos/uso terapêutico , Lasers de Estado Sólido/uso terapêutico , Tomografia de Coerência Óptica/métodos , Erosão Dentária/tratamento farmacológico , Erosão Dentária/cirurgia , Animais , Bovinos , Dentina/efeitos da radiação , Humanos , Erosão Dentária/patologiaRESUMO
BACKGROUND/PURPOSE: Oxidative hair dyes can damage the hair, since these chemical procedures are involved to change the fiber structure and therefore changes in their mechanical and surface properties. Evaluate and compare the effect of the two colors of oxidative hair dye emulsions on Caucasian hair. This research analyzed the Dark brown hair untreated (I); Dark brown hair treated with light brown dye (II); Dark brown hair treated with light blond dye (III); Light blond hair untreated (IV); Light blond hair treated with light brown dye (V); Light blond hair treated with light blond dye (VI) on Caucasian hair. METHODS: The hair samples were submitted to breaking strength, color, and optical coherence tomography (OCT) analysis. RESULTS: For the breaking strength assay no presented statistically significant differences between treatments. The parameters of color and brightness can differ in some hair dye formulations, but also the hair type can respond differently. The OCT images of the sample I and IV was possible observed, clearly Medulla and Cortex, which was not observed clearly after treatment with both oxidative hair dye colors. CONCLUSION: Based on the results, the oxidative hair dyes increased alteration in color and ultrastructure of hair.
Assuntos
Cor de Cabelo/efeitos dos fármacos , Tinturas para Cabelo , Cabelo/citologia , Cabelo/efeitos dos fármacos , Resistência à Tração/efeitos dos fármacos , Tomografia de Coerência Óptica/métodos , Cabelo/fisiologia , Cor de Cabelo/fisiologia , Humanos , Aumento da Imagem/métodos , Técnicas In Vitro , Oxidantes/administração & dosagem , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , Resistência à Tração/fisiologiaRESUMO
An in vitro study of morphological alterations between sound dental structure and artificially induced white spot lesions in human teeth, was performed through the loss of fluorescence by Quantitative Light-Induced Fluorescence (QLF) and the alterations of the light attenuation coefficient by Optical Coherence Tomography (OCT). To analyze the OCT images using a commercially available system, a special algorithm was applied, whereas the QLF images were analyzed using the software available in the commercial system employed. When analyzing the sound region against white spot lesions region by QLF, a reduction in the fluorescence intensity was observed, whilst an increase of light attenuation by the OCT system occurred. Comparison of the percentage of alteration between optical properties of sound and artificial enamel caries regions showed that OCT processed images through the attenuation of light enhanced the tooth optical alterations more than fluorescence detected by QLF System. QLF versus OCT imaging of enamel caries: a photonics assessment.
Assuntos
Cárie Dentária/diagnóstico por imagem , Esmalte Dentário/patologia , Fluorescência , Tomografia de Coerência Óptica , Algoritmos , Esmalte Dentário/diagnóstico por imagem , Humanos , LuzRESUMO
ABSTRACT The physicochemical attributes of emulsified systems are influenced by the characteristics of their internal phase droplets (concentration, size and morphology), which can be modified not only by the formulation components, but also by the analytical methodology employed. Thus, the aim of this work involved the physicochemical characterization of cosmetic emulsions obtained from different surfactants, as well as the introduction of the optical coherence tomography (OCT) as the analytical technique employed for the morphological characterization and particle size determination of the formulations. Three emulsions were prepared, differing at the type and concentration of the surfactant used, and their droplet sizes were evaluated through optical microscopy, laser diffraction and OCT. The microscopic analysis and the laser diffraction techniques provided an average particle size minor than 6.0 µm, not detected by the OCT technique, which could identify only bigger particles of the emulsified systems' internal phase. The results testify that OCT was suitable for the morphological characterization of cosmetic emulsions; however, the technique needs to be improved to ensure a better sensitivity in the analysis of smaller particles.
RESUMO Os atributos físico-químicos de sistemas emulsionados são influenciados pelas características de suas gotículas de fase interna (concentração, tamanho e morfologia), as quais podem ser modificadas não apenas pelos componentes da formulação, mas também pela metodologia analítica empregada. Desta forma, o objetivo deste trabalho envolveu a caracterização físico-química de emulsões cosméticas obtidas a partir de diferentes tensoativos, bem como a introdução da tomografia de coerência óptica (OCT) como a técnica analítica utilizada para a caracterização morfológica e determinação do tamanho de partícula das formulações. Três emulsões foram preparadas, diferindo no tipo e concentração do tensoativo empregado, e seus tamanhos de gotícula foram avaliados por meio das técnicas de microscopia óptica, difração a laser e OCT. As técnicas de microscopia óptica e difração a laser forneceram tamanhos de partícula médios menores de 6.0 µm, não detectados pela técnica de OCT, que permitiu apenas a identificação de partículas maiores pertencentes à fase interna dos sistemas emulsionados. Os resultados reforçam a introdução da OCT como metodologia promissora para a caracterização morfológica de emulsões cosméticas; no entanto, a técnica requer aprimoramento para garantir maior sensibilidade na análise de partículas de menor tamanho.
Assuntos
Tomografia de Coerência Óptica/métodos , Emulsões/análise , Tensoativos/análiseRESUMO
AIM: This study evaluated and improved a protocol for obtaining standard caries-affected dentin (CAD) by Streptococcus mutans biofilm demineralization process. MATERIALS AND METHODS: Forty-eight human molars were divided in six experimental groups, according to: period of cariogenic challenge (7, 14 or 21 days) and type of dentin (erupted or unerupted teeth). After complete cariogenic challenge sound and CAD dentin were evaluated by: visual inspection (VI), digital radiography (DR), optical coherence tomography (OCT) and laser fluorescence (LF). RESULTS: Visual inspection confirmed the formation of CAD based on tissue yellowing and loss of surface gloss. Digital radiography detected the presence of radiolucent images, suggesting caries. Three calibrated examiners viewed all images obtained by VI and DR and were able to distinguish healthy from CAD. Fisher's exact statistical test (p < 0.05) confirmed no difference between groups by VI (G1/G4: p = 0.6; G2/G5: p = 1; G3/G6: p = 1) or DR (G1/G4: p = 1; G2/G5: p = 1; G3/G6: p = 1). Both LF values and demineralization depth, as determined by OCT, were subjected to ANOVA (p < 0.05). For LF, a statistically significant difference was observed for the type of substrate (p = 0.001). For OCT, no statistically significant differences in the type of substrate (p = 0.163), length of cariogenic challenge (p = 0.512) or interaction between factors (p = 0.148) were observed. Scanning electron micrographs confirmed the presence of CAD; a more uniform demineralization surface was observed in the dentin of unerupted teeth. CONCLUSION: This protocol suggests that standard CAD can be obtained in 7 days of cariogenic challenge using unerupted teeth. Clinical significance: With the new perspective on the clinical treatment of caries lesions, bonding is increasingly performed to demineralize CAD, which is susceptible to remineralization. A useful protocol to standardize the production of CAD, by microbiological cariogenic challenge, would be an important contribution to laboratorial test in the field of operative dentistry.
Assuntos
Biofilmes , Cárie Dentária/patologia , Dentina/patologia , Streptococcus mutans/fisiologia , Técnicas de Laboratório Clínico , Cárie Dentária/microbiologia , Dentina/microbiologia , Fluorescência , Humanos , Técnicas In Vitro , Lasers , Microscopia Eletrônica de Varredura , Exame Físico , Radiografia Dentária Digital/métodos , Fatores de Tempo , Tomografia de Coerência Óptica/métodos , Desmineralização do Dente/microbiologia , Dente não Erupcionado/microbiologia , Dente não Erupcionado/patologiaRESUMO
OBJECTIVE: The aim of this study was to evaluate the morphological alterations of radiation-related caries using optical coherence tomography. METHODS: Thirty-six extracted teeth from 11 patients who had undergone radiotherapy were sectioned in the sagittal axis in the center of the carious lesion, and 100 µm thick sections were obtained from each specimen. One sample from each tooth was investigated by an optical coherence tomography (OCT) system, and the results were compared with histological images from polarized light microscopy. RESULTS: In OCT dentin caries images, the demineralized area appeared as a white region, whereas the translucent zone appeared as a dark area, a similar pattern also seen in coronal caries. In noncavitated enamel lesions clinically observed as brown discoloration, the area of high porosity, and also the dark color, absorbs part of the light, resulting in a dark pattern. Finally, the involvement of dentin-enamel junction (DEJ) or cement-enamel junction (CEJ) could be clearly observed, when present and marked alterations along the CEJ could be noted, as junction continuity loss, gap formation, and mineral loss tissue. CONCLUSIONS: The OCT technique was able to characterize radiation-related caries, from a morphological point of view. Also demonstrated was its potential benefit for use in the clinical monitoring of radiation-related carious process.
Assuntos
Cárie Dentária/etiologia , Cárie Dentária/patologia , Lesões por Radiação/patologia , Tomografia de Coerência Óptica , HumanosRESUMO
The purpose of this study was to evaluate the degree of demineralization of artificially induced caries-affected human dentin by an in vitro microbiological method. The occlusal surfaces of 6 human molar teeth were abraded until a flat surface was obtained, and the enamel was removed to expose the occlusal dentin surface. These teeth were sectioned in 12 halves in the vestibular-lingual direction and divided into 3 groups according to the period length of the microbiological essay (n = 4): G1, 7 days; G2, 14 days; and G3, 21 days. The surfaces of all specimens were protected by an acid-resistant nail varnish, except for a window where the caries lesion was induced by a Streptoccocus mutans biofilm in a batch-culture model supplemented with 5% sucrose. The specimens were then analyzed by optical coherence tomography (OCT) with a super-luminescent light diode (Λ = 930 nm) with 6.0-µm lateral and longitudinal resolution (in the air). Qualitative and quantitative results (images and average dentin demineralization, respectively) were obtained. The mean demineralization depths were (µm) 235 ± 31.4, 279 ± 14, and 271 ± 8.3 in groups 1, 2, and 3, respectively. In addition, no significant change was observed in the lesion mean depth from 7 days of cariogenic challenge on. In conclusion, OCT was shown to be an efficient and non-invasive method to detect the depths of lesions caused by demineralization. Further, a seven-day demineralization time was considered sufficient for caries-affected dentin to be obtained.
Assuntos
Testes de Atividade de Cárie Dentária/métodos , Cárie Dentária/diagnóstico , Dentina/ultraestrutura , Tomografia de Coerência Óptica/métodos , Biofilmes , Dentina/química , Humanos , Técnicas In Vitro , Propriedades de Superfície , Fatores de TempoRESUMO
The purpose of this study was to evaluate the degree of demineralization of artificially induced caries-affected human dentin by an in vitro microbiological method. The occlusal surfaces of 6 human molar teeth were abraded until a flat surface was obtained, and the enamel was removed to expose the occlusal dentin surface. These teeth were sectioned in 12 halves in the vestibular-lingual direction and divided into 3 groups according to the period length of the microbiological essay (n = 4): G1, 7 days; G2, 14 days; and G3, 21 days. The surfaces of all specimens were protected by an acid-resistant nail varnish, except for a window where the caries lesion was induced by a Streptoccocus mutans biofilm in a batch-culture model supplemented with 5 percent sucrose. The specimens were then analyzed by optical coherence tomography (OCT) with a super-luminescent light diode (Λ = 930 nm) with 6.0-µm lateral and longitudinal resolution (in the air). Qualitative and quantitative results (images and average dentin demineralization, respectively) were obtained. The mean demineralization depths were (µm) 235 ± 31.4, 279 ± 14, and 271 ± 8.3 in groups 1, 2, and 3, respectively. In addition, no significant change was observed in the lesion mean depth from 7 days of cariogenic challenge on. In conclusion, OCT was shown to be an efficient and non-invasive method to detect the depths of lesions caused by demineralization. Further, a seven-day demineralization time was considered sufficient for caries-affected dentin to be obtained.
Assuntos
Humanos , Testes de Atividade de Cárie Dentária/métodos , Cárie Dentária/diagnóstico , Dentina/ultraestrutura , Técnicas In Vitro , Tomografia de Coerência Óptica/métodos , Biofilmes , Dentina/química , Propriedades de Superfície , Fatores de TempoRESUMO
OBJECTIVES: The purpose of this study was to evaluate polymerization shrinkage of resin composites using a coordinate measuring machine, optical coherence tomography and a more widely known method, such as Archimedes Principle. Two null hypothesis were tested: (1) there are no differences between the materials tested; (2) there are no differences between the methods used for polymerization shrinkage measurements. METHODS: Polymerization shrinkage of seven resin-based dental composites (Filtek Z250™, Filtek Z350™, Filtek P90™/3M ESPE, Esthet-X™, TPH Spectrum™/Dentsply 4 Seasons™, Tetric Ceram™/Ivoclar-Vivadent) was measured. For coordinate measuring machine measurements, composites were applied to a cylindrical Teflon mold (7 mm × 2 mm), polymerized and removed from the mold. The difference between the volume of the mold and the volume of the specimen was calculated as a percentage. Optical coherence tomography was also used for linear shrinkage evaluations. The thickness of the specimens was measured before and after photoactivation. Polymerization shrinkage was also measured using Archimedes Principle of buoyancy (n=5). Statistical analysis of the data was performed with ANOVA and the Games-Howell test. RESULTS: The results show that polymerization shrinkage values vary with the method used. Despite numerical differences the ranking of the resins was very similar with Filtek P90 presenting the lowest shrinkage values. SIGNIFICANCE: Because of the variations in the results, reported values could only be used to compare materials within the same method. However, it is possible rank composites for polymerization shrinkage and to relate these data from different test methods. Independently of the method used, reduced polymerization shrinkage was found for silorane resin-based composite.