MutL Activates UvrD by Interaction Between the MutL C-terminal Domain and the UvrD 2B Domain.

UvrD is a helicase vital for DNA replication and quality control processes. In its monomeric state, UvrD exhibits limited helicase activity, necessitating either dimerization or assistance from an accessory protein to efficiently unwind DNA. Within the DNA mismatch repair pathway, MutL plays a pivotal role in relaying the repair signal, enabling UvrD to unwind DNA from the strand incision site up to and beyond the mismatch. Although this interdependence is well-established, the precise mechanism of activation and the specific MutL-UvrD interactions that trigger helicase activity remain elusive. To address these questions, we employed site-specific crosslinking techniques using single-cysteine variants of MutL and UvrD followed by functional assays. Our investigation unveils that the C-terminal domain of MutL not only engages with UvrD but also acts as a self-sufficient activator of UvrD helicase activity on DNA substrates with 3'-single-stranded tails. Especially when MutL is covalently attached to the 2B or 1B domain the tail length can be reduced to a minimal substrate of 5 nucleotides without affecting unwinding efficiency.

Secondary 3-Chloropiperidines: Powerful Alkylating Agents.

In previous works, we demonstrated that tertiary 3-chloropiperidines are potent chemotherapeutics, alkylating the DNA through the formation of bicyclic aziridinium ions. Herein, we report the synthesis of novel secondary 3-chloropiperidine analogues. The synthesis incorporates a new procedure to monochlorinate unsaturated primary amines utilizing N-chlorosuccinimide, while carefully monitoring the temperature to prevent dichlorination. Furthermore, we successfully isolated highly strained bicyclic aziridines by treating the secondary 3-chloropiperidines with a sufficient amount of base. We conclude this work with a DNA cleavage assay as a proof of principle, comparing our previously known substrates to the novel compounds. In this, the secondary 3-chloropiperidine as well as the isolated bicyclic aziridine, proved to be more effective than their tertiary counterpart.

Reactive Acrylamide-Modified DNA Traps for Accurate Cross-Linking with Cysteine Residues in DNA-Protein Complexes Using Mismatch Repair Protein MutS as a Model.

Covalent protein capture (cross-linking) by reactive DNA derivatives makes it possible to investigate structural features by fixing complexes at different stages of DNA-protein recognition. The most common cross-linking methods are based on reactive groups that interact with native or engineered cysteine residues. Nonetheless, high reactivity of most of such groups leads to preferential fixation of early-stage complexes or even non-selective cross-linking. We synthesised a set of DNA reagents carrying an acrylamide group attached to the C5 atom of a 2'-deoxyuridine moiety via various linkers and studied cross-linking with MutS as a model protein. MutS scans DNA for mismatches and damaged nucleobases and can form multiple non-specific complexes with DNA that may cause non-selective cross-linking. By varying the length of the linker between DNA and the acrylamide group and by changing the distance between the reactive nucleotide and a mismatch in the duplex, we showed that cross-linking occurs only if the distance between the acrylamide group and cysteine is optimal within the DNA-protein complex. Thus, acrylamide-modified DNA duplexes are excellent tools for studying DNA-protein interactions because of high selectivity of cysteine trapping.

Cryogenic electron microscopy structures reveal how ATP and DNA binding in MutS coordinates sequential steps of DNA mismatch repair.

DNA mismatch repair detects and corrects mismatches introduced during DNA replication. The protein MutS scans for mismatches and coordinates the repair cascade. During this process, MutS undergoes multiple conformational changes in response to ATP binding, hydrolysis and release, but how ATP induces the various MutS conformations is incompletely understood. Here we present four cryogenic electron microscopy structures of Escherichia coli MutS at sequential stages of the ATP hydrolysis cycle that reveal how ATP binding and hydrolysis induce closing and opening of the MutS dimer, respectively. Biophysical analysis demonstrates how DNA binding modulates the ATPase cycle by prevention of hydrolysis during scanning and mismatch binding, while preventing ADP release in the sliding clamp state. Nucleotide release is achieved when MutS encounters single-stranded DNA that is produced during removal of the daughter strand. The combination of ATP binding and hydrolysis and its modulation by DNA enables MutS to adopt the different conformations needed to coordinate the sequential steps of the mismatch repair cascade.

The selection process of licensing a DNA mismatch for repair.

DNA mismatch repair detects and removes mismatches from DNA by a conserved mechanism, reducing the error rate of DNA replication by 100- to 1,000-fold. In this process, MutS homologs scan DNA, recognize mismatches and initiate repair. How the MutS homologs selectively license repair of a mismatch among millions of matched base pairs is not understood. Here we present four cryo-EM structures of Escherichia coli MutS that provide snapshots, from scanning homoduplex DNA to mismatch binding and MutL activation via an intermediate state. During scanning, the homoduplex DNA forms a steric block that prevents MutS from transitioning into the MutL-bound clamp state, which can only be overcome through kinking of the DNA at a mismatch. Structural asymmetry in all four structures indicates a division of labor between the two MutS monomers. Together, these structures reveal how a small conformational change from the homoduplex- to heteroduplex-bound MutS acts as a licensing step that triggers a dramatic conformational change that enables MutL binding and initiation of the repair cascade.

Probing the DNA-binding center of the MutL protein from the Escherichia coli mismatch repair system via crosslinking and Förster resonance energy transfer.

As no crystal structure of full-size MutL bound to DNA has been obtained up to date, in the present work we used crosslinking and Förster resonance energy transfer (FRET) assays for probing the putative DNA-binding center of MutL from Escherichia coli. Several single-cysteine MutL variants (scMutL) were used for site-specific crosslinking or fluorophore modification. The crosslinking efficiency between scMutL proteins and mismatched DNA modified with thiol-reactive probes correlated with the distances from the Cys residues to the DNA calculated from a model of MutS-MutL-DNA complex. FRET-based investigation of DNA binding with different scMutL variants clearly showed that the highest signals were detected for the variants MutL(T218C) and MutL(A251C) indicating closeness of the positions 218 and 251 to DNA in the MutL-DNA complex. Indeed, the Cys218 and Cys251 of scMutL were crosslinked to the reactive DNA with the highest yield demonstrating their proximity to DNA in the MutL-DNA complex. The presence of MutS increased the yield of conjugate formation between the MutL variants and the modified DNA due to tighter MutL-DNA interactions caused by MutS binding to MutL.

Mechanism and Regulation of Co-transcriptional mRNP Assembly and Nuclear mRNA Export.

mRNA is the "hermes" of gene expression as it carries the information of a protein-coding gene to the ribosome. Already during its synthesis, the mRNA is bound by mRNA-binding proteins that package the mRNA into a messenger ribonucleoprotein particle (mRNP). This mRNP assembly is important for mRNA stability and nuclear mRNA export. It also often regulates later steps in the mRNA lifetime such as translation and mRNA degradation in the cytoplasm. Thus, mRNP composition and accordingly the assembly of nuclear mRNA-binding proteins onto the mRNA are of crucial importance for correct gene expression. Here, we review our current knowledge of the mechanism of co-transcriptional mRNP assembly and nuclear mRNA export. We introduce the proteins involved and elaborate on what is known about their functions so far. In addition, we discuss the importance of regulated mRNP assembly in changing environmental conditions, especially during stress. Furthermore, we examine how defects in mRNP assembly cause diseases and how viruses exploit the host's nuclear mRNA export pathway. Finally, we summarize the questions that need to be answered in the future.

The unstructured linker arms of MutL enable GATC site incision beyond roadblocks during initiation of DNA mismatch repair.

DNA mismatch repair (MMR) maintains genome stability through repair of DNA replication errors. In Escherichia coli, initiation of MMR involves recognition of the mismatch by MutS, recruitment of MutL, activation of endonuclease MutH and DNA strand incision at a hemimethylated GATC site. Here, we studied the mechanism of communication that couples mismatch recognition to daughter strand incision. We investigated the effect of catalytically-deficient Cas9 as well as stalled RNA polymerase as roadblocks placed on DNA in between the mismatch and GATC site in ensemble and single molecule nanomanipulation incision assays. The MMR proteins were observed to incise GATC sites beyond a roadblock, albeit with reduced efficiency. This residual incision is completely abolished upon shortening the disordered linker regions of MutL. These results indicate that roadblock bypass can be fully attributed to the long, disordered linker regions in MutL and establish that communication during MMR initiation occurs along the DNA backbone.

Combinatorial recognition of clustered RNA elements by the multidomain RNA-binding protein IMP3.

How multidomain RNA-binding proteins recognize their specific target sequences, based on a combinatorial code, represents a fundamental unsolved question and has not been studied systematically so far. Here we focus on a prototypical multidomain RNA-binding protein, IMP3 (also called IGF2BP3), which contains six RNA-binding domains (RBDs): four KH and two RRM domains. We establish an integrative systematic strategy, combining single-domain-resolved SELEX-seq, motif-spacing analyses, in vivo iCLIP, functional validation assays, and structural biology. This approach identifies the RNA-binding specificity and RNP topology of IMP3, involving all six RBDs and a cluster of up to five distinct and appropriately spaced CA-rich and GGC-core RNA elements, covering a >100 nucleotide-long target RNA region. Our generally applicable approach explains both specificity and flexibility of IMP3-RNA recognition, allows the prediction of IMP3 targets, and provides a paradigm for the function of multivalent interactions with multidomain RNA-binding proteins in gene regulation.

Use of Single-Cysteine Variants for Trapping Transient States in DNA Mismatch Repair.

DNA mismatch repair (MMR) is necessary to prevent incorporation of polymerase errors into the newly synthesized DNA strand, as they would be mutagenic. In humans, errors in MMR cause a predisposition to cancer, called Lynch syndrome. The MMR process is performed by a set of ATPases that transmit, validate, and couple information to identify which DNA strand requires repair. To understand the individual steps in the repair process, it is useful to be able to study these large molecular machines structurally and functionally. However, the steps and states are highly transient; therefore, the methods to capture and enrich them are essential. Here, we describe how single-cysteine variants can be used for specific cross-linking and labeling approaches that allow trapping of relevant transient states. Analysis of these defined states in functional and structural studies is instrumental to elucidate the molecular mechanism of this important DNA MMR process.

Dual daughter strand incision is processive and increases the efficiency of DNA mismatch repair.

DNA mismatch repair (MMR) is an evolutionarily-conserved process responsible for the repair of replication errors. In Escherichia coli, MMR is initiated by MutS and MutL, which activate MutH to incise transiently-hemimethylated GATC sites. MMR efficiency depends on the distribution of these GATC sites. To understand which molecular events determine repair efficiency, we quantitatively studied the effect of strand incision on unwinding and excision activity. The distance between mismatch and GATC site did not influence the strand incision rate, and an increase in the number of sites enhanced incision only to a minor extent. Two GATC sites were incised by the same activated MMR complex in a processive manner, with MutS, the closed form of MutL and MutH displaying different roles. Unwinding and strand excision were more efficient on a substrate with two nicks flanking the mismatch, as compared to substrates containing a single nick or two nicks on the same side of the mismatch. Introduction of multiple nicks by the human MutLα endonuclease also contributed to increased repair efficiency. Our data support a general model of prokaryotic and eukaryotic MMR in which, despite mechanistic differences, mismatch-activated complexes facilitate efficient repair by creating multiple daughter strand nicks.

Protein-protein interactions in DNA mismatch repair.

The principal DNA mismatch repair proteins MutS and MutL are versatile enzymes that couple DNA mismatch or damage recognition to other cellular processes. Besides interaction with their DNA substrates this involves transient interactions with other proteins which is triggered by the DNA mismatch or damage and controlled by conformational changes. Both MutS and MutL proteins have ATPase activity, which adds another level to control their activity and interactions with DNA substrates and other proteins. Here we focus on the protein-protein interactions, protein interaction sites and the different levels of structural knowledge about the protein complexes formed with MutS and MutL during the mismatch repair reaction.

MutS/MutL crystal structure reveals that the MutS sliding clamp loads MutL onto DNA.

To avoid mutations in the genome, DNA replication is generally followed by DNA mismatch repair (MMR). MMR starts when a MutS homolog recognizes a mismatch and undergoes an ATP-dependent transformation to an elusive sliding clamp state. How this transient state promotes MutL homolog recruitment and activation of repair is unclear. Here we present a crystal structure of the MutS/MutL complex using a site-specifically crosslinked complex and examine how large conformational changes lead to activation of MutL. The structure captures MutS in the sliding clamp conformation, where tilting of the MutS subunits across each other pushes DNA into a new channel, and reorientation of the connector domain creates an interface for MutL with both MutS subunits. Our work explains how the sliding clamp promotes loading of MutL onto DNA, to activate downstream effectors. We thus elucidate a crucial mechanism that ensures that MMR is initiated only after detection of a DNA mismatch.

Chromatographic isolation of the functionally active MutS protein covalently linked to deoxyribonucleic acid.

DNA metabolism is based on formation of different DNA-protein complexes which can adopt various conformations. To characterize functioning of such complexes, one needs a solution-based technique which allows fixing a complex in a certain transient conformation. The crosslinking approach is a popular tool for such studies. However, it is under debate if the protein components retain their natural activities in the resulting crosslinked complexes. In the present work we demonstrate the possibility of obtaining pure DNA conjugate with functionally active protein using as example MutS protein from Escherichia coli mismatch repair system. A conjugate of a chemically modified mismatch-containing DNA duplex with MutS is fixed by thiol-disulfide exchange reaction. To perform a reliable test of the protein activity in the conjugate, such conjugate must be thoroughly separated from the uncrosslinked protein and DNA prior to the test. In the present work, we employ anion exchange chromatography for this purpose for the first time and demonstrate this technique to be optimal for the conjugate purification. The activity test is a FRET-based detection of DNA unbending. We show experimentally that MutS in the conjugate retains its ability to unbend DNA in response to ATP addition and find out for the first time that the DNA unbending rate increases with increasing ATP concentration. Since the crosslinked complexes contain active MutS protein, they can be used in further experiments to investigate MutS interactions with other proteins of the mismatch repair system.

Is thymidine glycol containing DNA a substrate of E. coli DNA mismatch repair system?

The DNA mismatch repair (MMR) system plays a crucial role in the prevention of replication errors and in the correction of some oxidative damages of DNA bases. In the present work the most abundant oxidized pyrimidine lesion, 5,6-dihydro-5,6-dihydroxythymidine (thymidine glycol, Tg) was tested for being recognized and processed by the E. coli MMR system, namely complex of MutS, MutL and MutH proteins. In a partially reconstituted MMR system with MutS-MutL-MutH proteins, G/Tg and A/Tg containing plasmids failed to provoke the incision of DNA. Tg residue in the 30-mer DNA duplex destabilized double helix due to stacking disruption with neighboring bases. However, such local structural changes are not important for E. coli MMR system to recognize this lesion. A lack of repair of Tg containing DNA could be due to a failure of MutS (a first acting protein of MMR system) to interact with modified DNA in a proper way. It was shown that Tg in DNA does not affect on ATPase activity of MutS. On the other hand, MutS binding affinities to DNA containing Tg in G/Tg and A/Tg pairs are lower than to DNA with a G/T mismatch and similar to canonical DNA. Peculiarities of MutS interaction with DNA was monitored by Förster resonance energy transfer (FRET) and fluorescence anisotropy. Binding of MutS to Tg containing DNAs did not result in the formation of characteristic DNA kink. Nevertheless, MutS homodimer orientation on Tg-DNA is similar to that in the case of G/T-DNA. In contrast to G/T-DNA, neither G/Tg- nor A/Tg-DNA was able to stimulate ADP release from MutS better than canonical DNA. Thus, Tg residue in DNA is unlikely to be recognized or processed by the E. coli MMR system. Probably, the MutS transformation to active "sliding clamp" conformation on Tg-DNA is problematic.

Using stable MutS dimers and tetramers to quantitatively analyze DNA mismatch recognition and sliding clamp formation.

The process of DNA mismatch repair is initiated when MutS recognizes mismatched DNA bases and starts the repair cascade. The Escherichia coli MutS protein exists in an equilibrium between dimers and tetramers, which has compromised biophysical analysis. To uncouple these states, we have generated stable dimers and tetramers, respectively. These proteins allowed kinetic analysis of DNA recognition and structural analysis of the full-length protein by X-ray crystallography and small angle X-ray scattering. Our structural data reveal that the tetramerization domains are flexible with respect to the body of the protein, resulting in mostly extended structures. Tetrameric MutS has a slow dissociation from DNA, which can be due to occasional bending over and binding DNA in its two binding sites. In contrast, the dimer dissociation is faster, primarily dependent on a combination of the type of mismatch and the flanking sequence. In the presence of ATP, we could distinguish two kinetic groups: DNA sequences where MutS forms sliding clamps and those where sliding clamps are not formed efficiently. Interestingly, this inability to undergo a conformational change rather than mismatch affinity is correlated with mismatch repair.

Site- and strand-specific nicking of DNA by fusion proteins derived from MutH and I-SceI or TALE repeats.

Targeted genome engineering requires nucleases that introduce a highly specific double-strand break in the genome that is either processed by homology-directed repair in the presence of a homologous repair template or by non-homologous end-joining (NHEJ) that usually results in insertions or deletions. The error-prone NHEJ can be efficiently suppressed by 'nickases' that produce a single-strand break rather than a double-strand break. Highly specific nickases have been produced by engineering of homing endonucleases and more recently by modifying zinc finger nucleases (ZFNs) composed of a zinc finger array and the catalytic domain of the restriction endonuclease FokI. These ZF-nickases work as heterodimers in which one subunit has a catalytically inactive FokI domain. We present two different approaches to engineer highly specific nickases; both rely on the sequence-specific nicking activity of the DNA mismatch repair endonuclease MutH which we fused to a DNA-binding module, either a catalytically inactive variant of the homing endonuclease I-SceI or the DNA-binding domain of the TALE protein AvrBs4. The fusion proteins nick strand specifically a bipartite recognition sequence consisting of the MutH and the I-SceI or TALE recognition sequences, respectively, with a more than 1000-fold preference over a stand-alone MutH site. TALE-MutH is a programmable nickase.

Covalently trapping MutS on DNA to study DNA mismatch recognition and signaling.

The DNA repair protein MutS forms clamp-like structures on DNA that search for and recognize base mismatches leading to ATP-transformed signaling clamps. In this study, the mobile MutS clamps were trapped on DNA in a functional state using single-cysteine variants of MutS and thiol-modified homoduplex or heteroduplex DNA. This approach allows stabilization of various transient MutS-DNA complexes and will enable their structural and functional analysis.

Chemical rescue of active site mutants of S. pneumoniae surface endonuclease EndA and other nucleases of the HNH family by imidazole.

The His-Asn-His (HNH) motif characterizes the active sites of a large number of different nucleases such as homing endonucleases, restriction endonucleases, structure-specific nucleases and, in particular, nonspecific nucleases. Several biochemical studies have revealed an essential catalytic function for the first amino acid of this motif in HNH nucleases. This histidine residue was identified as the general base that activates a water molecule for a nucleophilic attack on the sugar phosphate backbone of nucleic acids. Replacement of histidine by an amino acid such as glycine or alanine, which lack the catalytically active imidazole side chain, leads to decreases of several orders of magnitude in the nucleolytic activities of members of this nuclease family. We were able, however, to restore the activity of HNH nuclease variants (i.e., EndA (Streptococcus pneumoniae), SmaNuc (Serratia marcescens) and NucA (Anabaena sp.)) that had been inactivated by His→Gly or His→Ala substitution by adding excess imidazole to the inactive enzymes in vitro. Imidazole clearly replaces the missing histidine side chain and thereby restores nucleolytic activity. Significantly, this chemical rescue could also be observed in vivo (Escherichia coli). The in vivo assay might be a promising starting point for the development of a high-throughput screening system for functional EndA inhibitors because, unlike the wild-type enzyme, the H160G and H160A variants of EndA can easily be produced in E. coli. A simple viability assay would allow inhibitors of EndA to be identified because these would counteract the toxicities of the chemically rescued EndA variants. Such inhibitors could be used to block the nucleolytic activity of EndA, which as a surface-exposed enzyme in its natural host destroys the DNA scaffolds of neutrophil extracellular traps (NETs) and thereby allows S. pneumoniae to escape the innate immune response.