Distribution of microplastics in bathyal- to hadal-depth sediments and transport process along the deep-sea canyon and the Kuroshio Extension in the Northwest Pacific.

Understanding microplastic (MP) behavior in oceans is crucial for reducing marine plastic pollution. However, the complex process underlying MP transportation to the deep seafloor remains unknown despite the deep sea being considered its major sink. We focused on MP distribution in Sagami Bay (adjacent to highly populated areas of Japan), the plate triple junction connected through the Sagami Trough, and the abyssal plain immediately below the Kuroshio Extension. We observed the highest number of MPs in the abyssal stations, more than previously reported. The polymer types and aspect ratio of MPs in the abyssal stations significantly differed from those in the bathyal/hadal stations. The study suggests that MPs accumulated in the open ocean surface layer sink to the abyssal plains immediately below it, while MPs from land sources accumulate in the bathyal depth and are transported to the hadal depth near the coast through turbidity currents along the submarine canyon.

mTORC1 regulates phagosome digestion of symbiotic bacteria for intracellular nutritional symbiosis in a deep-sea mussel.

Phagocytosis is one of the methods used to acquire symbiotic bacteria to establish intracellular symbiosis. A deep-sea mussel, Bathymodiolus japonicus, acquires its symbiont from the environment by phagocytosis of gill epithelial cells and receives nutrients from them. However, the manner by which mussels retain the symbiont without phagosome digestion remains unknown. Here, we show that controlling the mechanistic target of rapamycin complex 1 (mTORC1) in mussels leads to retaining symbionts in gill cells. The symbiont is essential for the host mussel nutrition; however, depleting the symbiont's energy source triggers the phagosome digestion of symbionts. Meanwhile, the inhibition of mTORC1 by rapamycin prevented the digestion of the resident symbionts and of the engulfed exogenous dead symbionts in gill cells. This indicates that mTORC1 promotes phagosome digestion of symbionts under reduced nutrient supply from the symbiont. The regulation mechanism of phagosome digestion by mTORC1 through nutrient signaling with symbionts is key for maintaining animal-microbe intracellular nutritional symbiosis.

Development of marine biodiversity database (BISMaL) to enable estimations past habitat conditions for marine life in the northwestern Pacific.

Global activities involving the collection of marine biodiversity information have provided a large amount of biological observation records that cover various spatiotemporal areas. To predict biological responses or distribution changes in response to environmental changes by using these observation records, it is essential to analyze not only the current marine physicochemical environmental conditions but also the past conditions when the organisms were observed. We developed a new function to estimate the past marine environmental conditions for the observation records in our marine biodiversity database (Biological Information System for Marine Life: BISMaL) and examine whether the database can reliably estimate thermal habitats for both benthic and planktonic marine organisms. For the benthic squat lobster Shinkaia crosnieri, the estimated and observed in situ temperatures were similar to each other. For the planktonic chaetognaths Krohnitta pacifica and K. subtilis, the estimated temperatures showed clear seasonal changes specific to their distribution areas. These results indicated that BISMaL can reliably provide past habitat conditions regardless of planktonic or benthic lifestyles. BISMaL, which provides both biological observations and estimated past environmental conditions through web services, could lower the barrier to data access and use and make data-driven science available not only for data scientists but also for various marine scientists, such as taxonomists, ecologists and field scientists. Database URL:  https://www.godac.jamstec.go.jp/bismal/e/.

Occurrence and levels of polybrominated diphenyl ethers (PBDEs) in deep-sea sharks from Suruga Bay, Japan.

Few studies have investigated the prevalence of polybrominated diphenyl ethers (PBDEs) in deep-sea sharks. In this study, the levels and profiles of PBDEs were determined in liver samples of eight different species of deep-sea sharks collected in Suruga Bay, Japan. Widespread contamination of PBDEs in the deep-sea environment was reconfirmed in this study as these persistent organic pollutants (POPs) were detected in all specimens analyzed. Mean ΣPBDE levels in the deep-sea sharks ranged from 7 to 517 ng/g of lipid weight. The distribution patterns of BDE homologues were similar in all species where tetra-BDEs provided the dominant contribution to total PBDEs (46%). PBDEs levels were similar to, or higher than, those seen in other deep-sea sharks from different regions. The levels of PBDEs were likely to reflect their feeding preferences as higher PBDE levels were seen in species with higher trophic positions.

Optimization of environmental DNA extraction and amplification methods for metabarcoding of deep-sea fish.

Analyses of environmental DNA (eDNA) from macroorganisms in aquatic environments have greatly advanced in recent years. In particular, eDNA metabarcoding of fish using universal PCR primers has been reported in various waters. Although pumped deep-sea water was used for eDNA metabarcoding of deep-sea fish, conventional methods only resulted in small amounts of extracted eDNA and subsequent few or no PCR amplicons. To optimize eDNA metabarcoding of deep-sea fish from pumped deep-sea water, we modified conventional procedures of eDNA extraction and PCR amplification. Here, we propose a modified eDNA extraction method, in which a filter used for eDNA sampling was shredded and incubated in microtubes for efficient lysis of eDNA sources. Total eDNA yield extracted using the modified protocol was approximately six-fold higher than that extracted by the conventional protocol. The PCR enzyme Platinum SuperFi II DNA Polymerase successfully amplified a target region of fish universal primers (MiFish) from trace amounts of eDNA extracted from pumped deep-sea water and suppressed nonspecific amplifications more effectively than the enzyme used in conventional methods. Approximately 93% of the sequence reads acquired by next generation sequencing of these amplicons were derived from fish. The improved procedure presented here provided effective eDNA metabarcoding of deep-sea fish.•A modified eDNA extraction protocol, in which a filter was shredded and incubated in microtubes, increased eDNA yields extracted from pumped deep-sea water over the conventional method.•The PCR enzyme Platinum SuperFi II DNA polymerase improved the amplification efficiency of trace amounts of MiFish objectives in eDNA extracted from pumped deep-sea water with suppressing nonspecific amplifications.•The use of Platinum SuperFi II DNA polymerase for eDNA metabarcoding using MiFish primers resulted in the acquisition of abundant sequence reads of deep-sea fish through next generation sequencing.

Massive occurrence of benthic plastic debris at the abyssal seafloor beneath the Kuroshio Extension, the North West Pacific.

The abyss (3500-6500 m) covers the bulk of the deep ocean floor yet little is known about the extent of plastic debris on the abyssal seafloor. Using video imagery we undertook a quantitative assessment of the debris present on the abyssal seafloor (5700-5800 m depth) beneath the Kuroshio Extension current system in the Northwest Pacific. This body of water is one of the major transit pathways for the massive amounts of debris that are entering the North Pacific Ocean from Asia. Shallower sites (1400-1500 m depth) were also investigated for comparison. The dominant type of debris was single-use plastics - mainly bags and food packaging. The density of the plastic debris (mean 4561 items/km2) in the abyssal zone was the highest recorded for an abyssal plain suggesting that the deep-sea basin in the Northwest Pacific is a significant reservoir of plastic debris.

Symbiont Transmission onto the Cell Surface of Early Oocytes in the Deep-Sea Clam Phreagena okutanii.

Symbiotic associations with beneficial microorganisms endow a variety of host animals with adaptability to the environment. Stable transmission of symbionts across host generations is a key event in the maintenance of symbiotic associations through evolutionary time. However, our understanding of the mechanisms of symbiont transmission remains fragmentary. The deep-sea clam Phreagena okutanii harbors chemoautotrophic intracellular symbiotic bacteria in gill epithelial cells, and depends on these symbionts for nutrition. In this study, we focused on the association of these maternally transmitted symbionts with ovarian germ cells in juvenile female clams. First, we established a sex identification method for small P. okutanii individuals, and morphologically classified female germ cells observed in the ovary. Then, we investigated the association of the endosymbiotic bacteria with germ cells. We found that the symbionts were localized on the outer surface of the cell membrane of primary oocytes and not within the cluster of oogonia. Based on our findings, we discuss the processes and mechanisms of symbiont vertical transmission in P. okutanii.

Development of robust models for rapid classification of microplastic polymer types based on near infrared hyperspectral images.

Hyperspectral data in the near infrared range were examined for nine common types of plastic particles of 1 mm and 100-500 µm sizes on dry and wet glass fiber filters. Weaker peak intensities were detected for small particles compared to large particles, and the reflectances were weaker at longer wavelengths when the particles were measured on a wet filter. These phenomena are explainable due to the effect of the correlation between the particle size and the absorption of infrared light by water. We constructed robust classification models that are capable of classifying polymer types, regardless of particle size or filter conditions (wet vs. dry), based on hyperspectral data for small particles measured on wet filters. Using the models, we also successfully classified the polymer type of polystyrene beads covered with microalgae, which simulates the natural conditions of microplastics in the ocean. This study suggests that hyperspectral imaging techniques with appropriate classification models allow the identification of microplastics without the time- and labor-consuming procedures of drying samples and removing biofilms, thus enabling more rapid analyses.

Optimization of a hyperspectral imaging system for rapid detection of microplastics down to 100 µm.

Plastic pollution has become one of the most emergent issues threating aquatic and terrestrial ecosystems. However, it is still challenging to rapidly detect small microplastics. Here, we present a method to rapidly detect microplastics using hyperspectral imaging in which we optimized a commercially available hyperspectral imaging system (Pika NIR-640, Resonon Inc., USA). The optimizations included: (1) changing the four-lamp assembly to a symmetrical set of converged-light near-infrared lamps that are placed sideways instead of above the sample stage; (2) adopting a macro-photography technique by applying an extension tube between the camera and the lens, and moving the lens of the hyperspectral camera to the imaging target (working distance of ~3 cm); (3) adjusting the exposure and aspect ratio by tuning the frame rate and scan speed of the imaging system. After optimization, the detection resolution of each pixel improved from 250 µm to 14.8 µm. With the optimized system, microplastics down to 100 µm in size were rapidly detected. This result is promising for the application of our new method in the accelerated detection of microplastics and will contribute to a better understanding of the microplastic pollution situation.

Cryptic fungal diversity revealed in deep-sea sediments associated with whale-fall chemosynthetic ecosystems.

In this study, sediments from whale-fall chemosynthetic ecosystems (two different sites, one naturally occurring at 4200 m water depth in South Atlantic Ocean and one artificially immersed at 100 m water depth in Kagoshima Bay, Japan) were investigated by Ion Torrent PGM sequencing of the ITS region of ribosomal RNA to reveal fungal communities in these unique marine environments. As a result, a total of 107 (897 including singletons) Operational Taxonomic Units (OTUs) were obtained from the samples explored. Composition of the 107 OTUs at the phylum level among the five samples from two different whale-fall sites was assigned to Ascomycota (46%), Basidiomycota (7%), unidentified fungi (21%), non-fungi (10%), and sequences with no affiliation to any organisms in the public database (No-match) (16%). The high detection of the unidentified fungi and unassigned fungi was revealed in the whale-fall environments in this study. Some of these unidentified fungi are allied to early diverging fungi and they were more abundant in the sediments not directly in contact with whalebone. This study suggests that a cryptic fungal community exists in unique whale-fall ecosystems.

Estimation of tsunami debris on seafloors towards future disaster preparedness: Unveiling spatial varying effects of combined land use and oceanographic factors.

A large amount of tsunami debris from the Great East Japan Earthquake in 2011 was sunk on the seafloor and threatened the marine ecosystem and local communities' economy, especially in fisheries. However, few studies estimated spatial accumulations of tsunami benthic debris, comparing to their flows on the ocean surface. Here, a spatially varying coefficient model was used to estimate tsunami debris accumulation considering the spatial structure of the data off the Tohoku region. Our model revealed the number of vessels nearest the coast at the tsunami event had the highest positive impact, whereas the distance from the coast and kinetic energy influenced negatively. However, the effect of the proximity to the coast wasn't detected in the Sendai bay, indicating spatial dependency of these effects. Our model estimation provides the fundamental information of tsunami debris accumulation on the seafloor, supporting early reconstruction and risk reduction in marine ecosystems and local communities.

Characterization of microplastics on filter substrates based on hyperspectral imaging: Laboratory assessments.

Microplastic pollution has become an urgent issue because it adversely affects ecosystems. However, efficient methods to detect and characterize microplastic particles are still in development. By conducting a series of laboratory assessments based on near-infrared hyperspectral imaging in the wavelength range of 900-1700 nm, we report the fundamental spectral features of (i) 11 authentic plastics and (ii) 11 filter substrate materials. We found that different plastic polymers showed distinct spectral features at 1150-1250 nm, 1350-1450 nm and 1600-1700 nm, enabling their automatic recognition and identification with spectral separation algorithms. Using an improved hyperspectral imaging system, we demonstrated the detection of three types of microplastic particles, polyethylene, polypropylene and polystyrene, down to 100 µm in diameter. As a filter substrate, a gold-coated polycarbonate filter (GPC0847-BA) showed constant reflectance over 900-1700 nm and a large radiative contrast against loaded plastic particles. Glass fiber filters (GF10 and GF/F) would also be suitable substrates due to their low cost and easy commercial availability. This study provides key parameters for applying hyperspectral imaging techniques for the detection of microplastics.

Bacterial diversity in deep-sea sediments under influence of asphalt seep at the São Paulo Plateau.

Here we investigated the diversity of bacterial communities from deep-sea surface sediments under influence of asphalt seeps at the Sao Paulo Plateau using next-generation sequencing method. Sampling was performed at North São Paulo Plateau using the human occupied vehicle Shinkai 6500 and her support vessel Yokosuka. The microbial diversity was studied at two surficial sediment layers (0-1 and 1-4 cm) of five samples collected in cores in water depths ranging from 2456 to 2728 m. Bacterial communities were studied through sequencing of 16S rRNA gene on the Ion Torrent platform and clustered in operational taxonomic units. We observed high diversity of bacterial sediment communities as previously described by other studies. When we considered community composition, the most abundant classes were Alphaproteobacteria (27.7%), Acidimicrobiia (20%), Gammaproteobacteria (11.3%) and Deltaproteobacteria (6.6%). Most abundant OTUs at family level were from two uncultured bacteria from Actinomarinales (5.95%) and Kiloniellaceae (3.17%). The unexpected high abundance of Alphaproteobacteria and Acidimicrobiia in our deep-sea microbial communities may be related to the presence of asphalt seep at North São Paulo Plateau, since these bacterial classes contain bacteria that possess the capability of metabolizing hydrocarbon compounds.

Sediment sampling with a core sampler equipped with aluminum tubes and an onboard processing protocol to avoid plastic contamination.

Microplastics are abundant even on the deep-sea floor far from land and the ocean surface where human activities take place. To obtain samples of microplastics from the deep-sea floor, a research vessel and suitable sampling equipment, such as a multiple corer, a box corer, or a push corer manipulated by a remotely operated (ROV) or human occupied vehicle (HOV) are needed. Most such corers use sampling tubes made of plastic, such as polycarbonate, acrylic, or polyvinyl chloride. These plastic tubes are easily scratched by sediment particles, in particular during collection of coarse sandy sediments, and, consequently, the samples may become contaminated with plastic from the tube. Here, we report on the use of aluminum tubes with both a multiple corer and a push corer to prevent such plastic contamination. When compared with plastic tubes, aluminum tubes have the disadvantages of heavier weight and non-transparency. We suggest ways to overcome these problems, and we also present an onboard processing protocol to prevent plastic contamination during sediment core sampling when plastic tubes are used. •Use of a sediment corer with aluminum tubes reduces the risk of plastic contamination in the sediment samples•The proposed method allows undisturbed sediment cores to be retrieved with comparable efficiency to conventional transparent core tubes.

A new small device made of glass for separating microplastics from marine and freshwater sediments.

Separating microplastics from marine and freshwater sediments is challenging, but necessary to determine their distribution, mass, and ecological impacts in benthic environments. Density separation is commonly used to extract microplastics from sediments by using heavy salt solutions, such as zinc chloride and sodium iodide. However, current devices/apparatus used for density separation, including glass beakers, funnels, upside-down funnel-shaped separators with a shut-off valve, etc., possess various shortcomings in terms of recovery rate, time consumption, and/or usability. In evaluating existing microplastic extraction methods using density separation, we identified the need for a device that allows rapid, simple, and efficient extraction of microplastics from a range of sediment types. We have developed a small glass separator, without a valve, taking a hint from an Utermöhl chamber. This new device is easy to clean and portable, yet enables rapid separation of microplastics from sediments. With this simple device, we recovered 94-98% of <1,000 µm microplastics (polyethylene, polypropylene, polyvinyl chloride, polyethylene terephthalate, and polystyrene). Overall, the device is efficient for various sizes, polymer types, and sediment types. Also, microplastics collected with this glass-made device remain chemically uncontaminated, and can, therefore, be used for further analysis of adsorbing contaminants and additives on/to microplastics.

A small, stainless-steel sieve optimized for laboratory beaker-based extraction of microplastics from environmental samples.

Removing non-plastic materials is a mandatory process for studying microplastics in environmental samples, and non-plastic materials, both inorganic and organic matter, are often removed chemically through sequential processes. In the multiple chemical treatment processes, the samples need to be collected and the reagent removed at the end of each chemical treatment before the samples are again exposed to a different reagent in a separate container. This leads to a loss of microplastics to some extent. Here, we developed a new, yet simple, small sieve made of stainless-steel that can fit in a laboratory beaker (e.g. 200 ml volume), allowing it to be transferred as-is between chemical treatments of environmental samples, even being soakable in a beaker of acid solution. The collection rates of microplastics were significantly higher in the small stainless-steel sieve than the commonly used filter method for different size of microplastic particles. The use of the new sieve means the processes of rinsing off and filtering samples can be abbreviated throughout the entire process of non-plastic matter removal from environmental samples, contributing to a lower chance of microplastic loss. The time consumed in the sieve method was also significantly lower than for the filtering method due to the elimination of the collection and rinsing steps, thus the use of this sieve can reduce processing time for the samples. The new method is innovative in terms of reducing both the microplastic loss and processing time during chemical treatment processes. •The method developed allows the lower chance of microplastic loss during chemical digestion process•The method reduces the time of sequential processes during chemical digestion.

Identification of cells expressing two peptidoglycan recognition proteins in the gill of the vent mussel, Bathymodiolus septemdierum.

In symbiotic systems in which symbionts are transmitted horizontally, hosts must accept symbionts from the environment while defending themselves against invading pathogenic microorganisms. How they distinguish pathogens from symbionts and how the latter evade host immune defences are not clearly understood. Recognition of foreign materials is one of the most critical steps in stimulating immune responses, and pattern recognition receptors (PRRs) play vital roles in this process. In this study, we focused on a group of highly conserved PRRs, peptidoglycan recognition proteins (PGRPs), in the deep-sea mussel, Bathymodiolus septemdierum, which harbours chemosynthetic bacteria in their gill epithelial cells. We isolated B. septemdierum PGRP genes BsPGRP-S and BsPGRP-L, which encode a short- and a long-type PGRP, respectively. The short-type PGRP has a signal peptide and was expressed in the asymbiotic goblet mucous cells in the gill epithelium, whereas the long-type PGRP was predicted to include a transmembrane domain and was expressed in gill bacteriocytes. Based on these findings, we hypothesize that the secreted and transmembrane PGRPs are engaged in host defence against pathogenic bacteria and/or in the regulation of symbiosis via different cellular localizations and mechanisms.

Genes functioned in kleptoplastids of Dinophysis are derived from haptophytes rather than from cryptophytes.

Toxic dinoflagellates belonging to the genus Dinophysis acquire plastids indirectly from cryptophytes through the consumption of the ciliate Mesodinium rubrum. Dinophysis acuminata harbours three genes encoding plastid-related proteins, which are thought to have originated from fucoxanthin dinoflagellates, haptophytes and cryptophytes via lateral gene transfer (LGT). Here, we investigate the origin of these plastid proteins via RNA sequencing of species related to D. fortii. We identified 58 gene products involved in porphyrin, chlorophyll, isoprenoid and carotenoid biosyntheses as well as in photosynthesis. Phylogenetic analysis revealed that the genes associated with chlorophyll and carotenoid biosyntheses and photosynthesis originated from fucoxanthin dinoflagellates, haptophytes, chlorarachniophytes, cyanobacteria and cryptophytes. Furthermore, nine genes were laterally transferred from fucoxanthin dinoflagellates, whose plastids were derived from haptophytes. Notably, transcription levels of different plastid protein isoforms varied significantly. Based on these findings, we put forth a novel hypothesis regarding the evolution of Dinophysis plastids that ancestral Dinophysis species acquired plastids from haptophytes or fucoxanthin dinoflagellates, whereas LGT from cryptophytes occurred more recently. Therefore, the evolutionary convergence of genes following LGT may be unlikely in most cases.

Evidence of selective pressure in whale fall microbiome proteins and its potential application to industry.

The present study addresses the microbiome of the first whale fall (YOKO 16) that has been described in the deep sea in the southern Atlantic Ocean (São Paulo Plateau; 4204 m depth), in terms of its metabolic uniqueness. Sets of ten thousand protein sequences from YOKO 16 and 29 public domain metagenomes (SRA and GenBank databases) that represent various marine, terrestrial and gut-associated microbial communities were analyzed. The determination of protein functionality, based on the KAAS server, indicated that the YOKO 16 microbiome has industrially-relevant proteins, such as proteases and lipases, that have low similarity (~50%) with previously-described enzymes. The amino acid usage in the YOKO 16 protein sequences (based on blastp and Clustal analysis) revealed a pattern of preference similar to that of extremophiles, with an increased usage of polar, charged and acidic amino acids and a decreased usage of nonpolar residues. We concluded that the targeted microbiome is of potential biotechnological use, which justifies the allocation of resources for the discovery of enzymes in deep-sea whale fall communities.

Ophirina amphinema n. gen., n. sp., a New Deeply Branching Discobid with Phylogenetic Affinity to Jakobids.

We report a novel nanoflagellate, Ophirina amphinema n. gen. n. sp., isolated from a lagoon of the Solomon Islands. The flagellate displays 'typical excavate' morphological characteristics, such as the presence of a ventral feeding groove with vanes on the posterior flagellum. The cell is ca. 4 µm in length, bears two flagella, and has a single mitochondrion with flat to discoid cristae. The flagellate exists in two morphotypes: a suspension-feeder, which bears flagella that are about the length of the cell, and a swimmer, which has longer flagella. In a tree based on the analysis of 156 proteins, Ophirina is sister to jakobids, with moderate bootstrap support. Ophirina has some ultrastructural (e.g. B-fibre associated with the posterior basal body) and mtDNA (e.g. rpoA-D) features in common with jakobids. Yet, other morphological features, including the crista morphology and presence of two flagellar vanes, rather connect Ophirina to non-jakobid or non-discobid excavates. Ophirina amphinema has some unique features, such as an unusual segmented core structure within the basal bodies and a rightward-oriented dorsal fan. Thus, Ophirina represents a new deeply-branching member of Discoba, and its mosaic morphological characteristics may illuminate aspects of the ancestral eukaryotic cellular body plan.