Development and Performance Evaluation of a New Test Kit for Quantifying the Degree of DNA Fragmentation.

BACKGROUND: PCR-based genetic testing of agricultural products and foods is widely used for detecting various analytical targets such as genetically modified organisms and food allergens. However, it is difficult to obtain accurate genetic testing results from processed foods because DNA is fragmented by heat and pressure during food processing. Thus we previously developed an analytical method to quantitatively evaluate the degree of DNA fragmentation for the purpose of quality control of genetic testing for processed foods. OBJECTIVE: Our previous analytical method requires four PCR primer sets, resulting in high reagent costs and heavy analytical workloads. Therefore, we attempted to develop an easy-to-use test kit for quantifying the degree of DNA fragmentation and to evaluate its analytical performance. METHODS: To simplify the analysis procedure, we used only two primer sets. In addition, no-fragmentation control templates were prepared to obtain stable measurement results. The precision of the simplified analysis was evaluated through blind tests among laboratories. RESULTS: It was confirmed that plant species and extracted DNA concentrations had little effect on analysis with the newly developed test kit. In addition, the analytical values indicating the degree of DNA fragmentation exhibited small variability among laboratories. CONCLUSION: We confirmed the high practicality of the developed test kit. Because DNA fragmentation in cells is a universal phenomenon, we anticipate that the test kit will be used not only for quality control of genetic testing but also for food testing, medical diagnostics and other applications in a range of fields. HIGHLIGHTS: The newly developed test kit enables quantitative evaluation of the degree of DNA fragmentation in a simple manner.

Rapid Screening Detection of Genetically Modified Papaya by Loop-Mediated Isothermal Amplification.

A loop-mediated isothermal amplification (LAMP)-mediated screening detection method for genetically modified (GM) papaya was developed targeting the 35S promoter (P35S) of the cauliflower mosaic virus. LAMP products were detected using a Genie II real-time fluorometer. The limit of detection (LOD) was evaluated and found to be ≤0.05% for papaya seeds. We also designed a primer set for the detection of the papaya endogenous reference sequence, chymopapain, and the species-specificity was confirmed. To improve cost-effectiveness, single-stranded tag hybridization (STH) on a chromatography printed-array strip (C-PAS) system, which is a lateral flow DNA chromatography technology, was applied. LAMP amplification was clearly detected by the system at the LOD level, and a duplex detection of P35S and chymopapain was successfully applied. This simple and quick method for the screening of GM papaya will be useful for the prevention of environmental contamination of unauthorized GM crops.

Simple, Precise, and Less Biased GMO Quantification by Multiplexed Genetic Element-Specific Digital PCR.

BACKGROUND: To provide the consumer with choices of genetically modified organisms (GMO) or non-GMO, official food labeling systems were established in many countries. Because the threshold GMO content values were set to distinguish between "non-GMO" and "GMO" designations, GMO content quantification methods are required for ensuring the appropriateness of labeling. OBJECTIVE: As the number of GMOs is continuously increasing around the world, we set out to develop a low-cost, simple and less biased analytical strategy to cover all necessary detection targets. METHODS: Digital PCR methods are advantageous compared to the conventional quantitative real-time PCR methods. We developed a digital PCR-based GMO quantification method to evaluate the GMO content in maize grains. To minimize the analytical workload, we adopted multiplex digital PCR targeting the 35S promoter and the nopaline synthase terminator, which are genetic elements commonly introduced in many GMOs. RESULTS: Our method is significantly simpler and more precise than the conventional real-time PCR-based methods. Additionally, we found that this method enables quantification of the copy number of GMO DNA without double counting multiple elements (35S promoter and nopaline synthase terminator) tandemly placed in a recombinant DNA construct. CONCLUSION: This is the first report on the development of a genetically modified maize quantification method using a multiplexed genetic element-specific digital PCR method. The tandem effect we report here is quite useful for reducing the bias in the analytical results. HIGHLIGHTS: Multiplexed genetic element-specific digital PCR can simplify weight-based GMO quantification and thus should prove useful in light of the continuous increase in the number of GM events.

Development of a Novel Detection Method Targeting an Ultrashort 25 bp Sequence Found in Agrobacterium-Mediated Transformed GM Plants.

Agrobacterium-mediated transformation is the most commonly used technique for plant genetic engineering. During the transformation, a T-DNA region, which is flanked by the right border (RB) and the left border, is transferred to plant nuclear chromosomes. Simultaneously, a sequence adjacent to the RB on T-DNA is frequently transferred to plant genomes together with the intentionally introduced recombinant DNA. We developed a novel polymerase chain reaction (PCR)-mediated detection method targeting this region. The conserved sequence of the region found in genetically modified (GM) crops is only 25 bp in length. To detect this ultrashort 25 bp sequence near the RB region, we designed a primer set consisting of a 12-base forward primer and a 13-base reverse primer. The predicted band was detected from GM crops by optimizing the PCR conditions. We used lateral flow DNA chromatography for rapid and inexpensive detection. The developed method would be applicable for screening the GM crops generated by Agrobacterium-mediated transformation.

Novel Bioprinting Application for the Production of Reference Material Containing a Defined Copy Number of Target DNA.

Nucleic acid amplification methods, such as polymerase chain reaction (PCR), are extensively used in many applications to detect target DNA because of their high sensitivity, good reproducibility, and wide dynamic range of quantification. However, analytical quality control when detecting low copy number target DNA is often missing because of a lack of appropriate reference materials. Recent advances in analytical sciences require a method to accurately quantify DNA at the single molecule level. Herein, we have developed a novel method to produce reference material containing a defined copy number of target DNA (referred to as "cell number-based DNA reference material"). In this method, a suspension of cells carrying a single target DNA sequence was ejected by an inkjet head, and the number of cells in each droplet was counted using highly sensitive cameras. The resulting solutions contained a defined copy number of target DNA and could be used as reference materials. The use of the newly developed reference material was compared with that of diluted solutions of target DNA to evaluate the performance of qualitative real-time PCR in terms of the limit of detection (LOD). Our results demonstrated that cell number-based DNA reference material provides more accurate information regarding performance quality. The reference material produced by this method is a promising tool to evaluate assay performance.

Detection of Sarcocystis spp. and Shiga toxin-producing Escherichia coli in Japanese sika deer meat using a loop-mediated isothermal amplification-lateral flow strip.

Game meat potentially harbors a number of parasitic and bacterial pathogens that cause foodborne disease. It is thus important to monitor the prevalence of such pathogens in game meats before retail and consumption to ensure consumer safety. In particular, Sarcocystis spp. and Shiga toxin-producing Escherichia coli (STEC) have been reported to be causative agents of food poisoning associated with deer meat consumption. To examine the prevalence of these microbiological agents on-site at a slaughterhouse, the rapid, simple and sensitive detection method known as the "DNA strip" has been developed, a novel tool combining loop-mediated isothermal amplification and a lateral flow strip. This assay has achieved higher sensitivity and faster than conventional PCR and is suitable for on-site inspection.

Rapid Screening Detection of Genetically Modified Crops by Loop-Mediated Isothermal Amplification with a Lateral Flow Dipstick.

We developed a novel loop-mediated isothermal amplification (LAMP)-based detection method using lateral flow dipstick chromatography for genetically modified (GM) soybean and maize events. The single-stranded tag hybridization (STH) for the chromatography printed-array strip (C-PAS) system was used for detections targeting the cauliflower mosaic virus 35S promoter, mannose-6-phosphate isomerase gene, Pisum sativum ribulose 1, 5-bisphosphate carboxylase terminator, a common sequence between the Cry1Ab and Cry1Ac genes, and a GA21-specific sequence. The STH C-PAS system was applicable for multiplex analyses to perform simultaneous detections. The limit of detection was 0.5% or less for each target. By using the developed method, the LAMP amplification was visually detected. Moreover, the detection could be carried out without any expensive instruments, even for the DNA amplification steps, by virtue of the isothermal reaction. We demonstrated that the rapid and useful method developed here would be applicable for screening GM crops.

Single-Laboratory Validation of Rapid and Easy DNA Strip for Porcine DNA Detection in Beef Meatballs.

Detection of meat from an animal species is required to avoid misleading food labels to consumers. Recently, we developed an easy-to-use molecular detection method by combining isothermal amplification and a DNA strip, referred to as DNA Strip. Here, we report our single-laboratory validation of DNA Strip to detect porcine DNA in beef meatballs. Our results showed that DNA Strip could specifically amplify the target of porcine DNA, with detection limit to 0.01% admixture of pork in beef meatballs. DNA Strip method was also robust because the use of heat block and laboratory water bath showed no significant differences and were comparable to the reference instrument. DNA Strip can detect porcine DNA within ca 1 h, including DNA extraction, DNA amplification, and detection. These results suggest that DNA Strip is applicable because it is easy to use and capable of detecting pork in beef meatballs with a greater detection limit.

Development and evaluation of rapid screening detection methods for genetically modified crops using loop-mediated isothermal amplification.

We developed new loop-mediated isothermal amplification (LAMP)-based detection methods for the screening of genetically modified (GM) maize and soybean events. The LAMP methods developed targeted seven sequences: cauliflower mosaic virus 35S promoter; 5-enolpyruvylshikimate-3-phosphate synthase gene from Agrobacterium tumefaciens strain CP4 (cp4epsps); phosphinothricin acetyltransferase (pat) gene; mannose-6-phosphate isomerase gene; Pisum sativum ribulose 1, 5-bisphosphate carboxylase terminator; a common sequence between Cry1Ab and Cry1Ac genes; and a GA21 construct-specific sequence. We designed new specific primer sets for each target, and the limit of detection (LOD) was evaluated using authorized GM maize and soybean events. LODs for each target were ≤ 0.5%. To make the DNA extraction process simple and rapid, we also developed a direct LAMP detection scheme using crude cell lysates. The entire process, including pretreatments and detection, could be completed within 1 h.

Highly Sensitive GMO Detection Using Real-Time PCR with a Large Amount of DNA Template: Single-Laboratory Validation.

Current genetically modified organism (GMO) detection methods allow for sensitive detection. However, a further increase in sensitivity will enable more efficient testing for large grain samples and reliable testing for processed foods. In this study, we investigated real-time PCR-based GMO detection methods using a large amount of DNA template. We selected target sequences that are commonly introduced into many kinds of GM crops, i.e., 35S promoter and nopaline synthase (NOS) terminator. This makes the newly developed method applicable to a wide range of GMOs, including some unauthorized ones. The estimated LOD of the new method was 0.005% of GM maize events; to the best of our knowledge, this method is the most sensitive among the GM maize detection methods for which the LOD was evaluated in terms of GMO content. A 10-fold increase in the DNA amount as compared with the amount used under common testing conditions gave an approximately 10-fold reduction in the LOD without PCR inhibition. Our method is applicable to various analytical samples, including processed foods. The use of other primers and fluorescence probes would permit highly sensitive detection of various recombinant DNA sequences besides the 35S promoter and NOS terminator.

Development and Evaluation of Event-Specific Quantitative PCR Method for Genetically Modified Soybean MON87701.

A real-time PCR-based analytical method was developed for the event-specific quantification of a genetically modified (GM) soybean event, MON87701. First, a standard plasmid for MON87701 quantification was constructed. The conversion factor (Cf) required to calculate the amount of genetically modified organism (GMO) was experimentally determined for a real-time PCR instrument. The determined Cf for the real-time PCR instrument was 1.24. For the evaluation of the developed method, a blind test was carried out in an inter-laboratory trial. The trueness and precision were evaluated as the bias and reproducibility of relative standard deviation (RSDr), respectively. The determined biases and the RSDr values were less than 30 and 13%, respectively, at all evaluated concentrations. The limit of quantitation of the method was 0.5%, and the developed method would thus be applicable for practical analyses for the detection and quantification of MON87701.

Interlaboratory validation data on real-time polymerase chain reaction detection for unauthorized genetically modified papaya line PRSV-YK.

This article is referred to research article entitled "Whole genome sequence analysis of unidentified genetically modified papaya for development of a specific detection method" (Nakamura et al., 2016) [1]. Real-time polymerase chain reaction (PCR) detection method for unauthorized genetically modified (GM) papaya (Carica papaya L.) line PRSV-YK (PRSV-YK detection method) was developed using whole genome sequence data (DDBJ Sequenced Read Archive under accession No. PRJDB3976). Interlaboratory validation datasets for PRSV-YK detection method were provided. Data indicating homogeneity of samples prepared for interlaboratory validation were included. Specificity and sensitivity test data for PRSV-YK detection method were also provided.

Selection of Suitable DNA Extraction Methods for Genetically Modified Maize 3272, and Development and Evaluation of an Event-Specific Quantitative PCR Method for 3272.

A novel real-time PCR-based analytical method was developed for the event-specific quantification of a genetically modified (GM) maize, 3272. We first attempted to obtain genome DNA from this maize using a DNeasy Plant Maxi kit and a DNeasy Plant Mini kit, which have been widely utilized in our previous studies, but DNA extraction yields from 3272 were markedly lower than those from non-GM maize seeds. However, lowering of DNA extraction yields was not observed with GM quicker or Genomic-tip 20/G. We chose GM quicker for evaluation of the quantitative method. We prepared a standard plasmid for 3272 quantification. The conversion factor (Cf), which is required to calculate the amount of a genetically modified organism (GMO), was experimentally determined for two real-time PCR instruments, the Applied Biosystems 7900HT (the ABI 7900) and the Applied Biosystems 7500 (the ABI7500). The determined Cf values were 0.60 and 0.59 for the ABI 7900 and the ABI 7500, respectively. To evaluate the developed method, a blind test was conducted as part of an interlaboratory study. The trueness and precision were evaluated as the bias and reproducibility of the relative standard deviation (RSDr). The determined values were similar to those in our previous validation studies. The limit of quantitation for the method was estimated to be 0.5% or less, and we concluded that the developed method would be suitable and practical for detection and quantification of 3272.

Whole genome sequence analysis of unidentified genetically modified papaya for development of a specific detection method.

Identification of transgenic sequences in an unknown genetically modified (GM) papaya (Carica papaya L.) by whole genome sequence analysis was demonstrated. Whole genome sequence data were generated for a GM-positive fresh papaya fruit commodity detected in monitoring using real-time polymerase chain reaction (PCR). The sequences obtained were mapped against an open database for papaya genome sequence. Transgenic construct- and event-specific sequences were identified as a GM papaya developed to resist infection from a Papaya ringspot virus. Based on the transgenic sequences, a specific real-time PCR detection method for GM papaya applicable to various food commodities was developed. Whole genome sequence analysis enabled identifying unknown transgenic construct- and event-specific sequences in GM papaya and development of a reliable method for detecting them in papaya food commodities.

Development of a reference material of a single DNA molecule for the quality control of PCR testing.

We developed a reference material of a single DNA molecule with a specific nucleotide sequence. The double-strand linear DNA which has PCR target sequences at the both ends was prepared as a reference DNA molecule, and we named the PCR targets on each side as confirmation sequence and standard sequence. The highly diluted solution of the reference molecule was dispensed into 96 wells of a plastic PCR plate to make the average number of molecules in a well below one. Subsequently, the presence or absence of the reference molecule in each well was checked by real-time PCR targeting for the confirmation sequence. After an enzymatic treatment of the reaction mixture in the positive wells for the digestion of PCR products, the resultant solution was used as the reference material of a single DNA molecule with the standard sequence. PCR analyses revealed that the prepared samples included only one reference molecule with high probability. The single-molecule reference material developed in this study will be useful for the absolute evaluation of a detection limit of PCR-based testing methods, the quality control of PCR analyses, performance evaluations of PCR reagents and instruments, and the preparation of an accurate calibration curve for real-time PCR quantitation.

A rapid and enhanced DNA detection method for crop cultivar discrimination.

In many crops species, the development of a rapid and precise cultivar discrimination system has been required for plant breeding and patent protection of plant cultivars and agricultural products. Here, we successfully evaluated strawberry cultivars via a novel method, namely, the single tag hybridization (STH) chromatographic printed array strip (PAS) using the PCR products of eight genomic regions. In a previous study, we showed that genotyping of eight genomic regions derived from FaRE1 retrotransposon insertion site enabled to discriminate 32 strawberry cultivars precisely, however, this method required agarose/acrylamide gel electrophoresis, thus has the difficulty for practical application. In contrast, novel DNA detection method in this study has some great advantages over standard DNA detection methods, including agarose/acrylamide gel electrophoresis, because it produces signals for DNA detection with dramatically higher sensitivity in a shorter time without any preparation or staining of a gel. Moreover, this method enables the visualization of multiplex signals simultaneously in a single reaction using several independent amplification products. We expect that this novel method will become a rapid and convenient cultivar screening assay for practical purposes, and will be widely applied to various situations, including laboratory research, and on-site inspection of plant cultivars and agricultural products.

Development of direct real-time PCR system applicable to a wide range of foods and agricultural products.

To improve the efficiency of DNA analysis of foods and agricultural products, we investigated a direct real-time PCR based on the real-time monitoring of DNA amplification directly from crude cell lysates of analytical samples. We established a direct real-time PCR system comprising sample pretreatment with a specified lysis buffer and real-time PCR using the developed master mix reagent. No PCR inhibition was observed in the analysis of crude cell lysates from 50 types of samples, indicating that the direct real-time PCR system is applicable to a wide range of materials. The specificity of the direct real-time PCR was evaluated by means of a model assay system for single nucleotide discrimination. Even when crude cell lysates coexisted in the reaction mixtures, the primer selectivity was not affected, suggesting that the sequence specificity of the direct real-time PCR was equivalent to that of PCR from purified DNA templates. We evaluated the sensitivity and quantitative performance of the direct real-time PCR using soybean flour samples including various amounts of genetically modified organisms. The results clearly showed that the direct real-time PCR system provides sensitive detection and precise quantitation.

Development and validation of an event-specific quantitative PCR method for genetically modified maize MIR162.

A novel real-time PCR-based analytical method was developed for the event-specific quantification of a genetically modified (GM) maize event, MIR162. We first prepared a standard plasmid for MIR162 quantification. The conversion factor (Cf) required to calculate the genetically modified organism (GMO) amount was empirically determined for two real-time PCR instruments, the Applied Biosystems 7900HT (ABI7900) and the Applied Biosystems 7500 (ABI7500) for which the determined Cf values were 0.697 and 0.635, respectively. To validate the developed method, a blind test was carried out in an interlaboratory study. The trueness and precision were evaluated as the bias and reproducibility of relative standard deviation (RSDr). The determined biases were less than 25% and the RSDr values were less than 20% at all evaluated concentrations. These results suggested that the limit of quantitation of the method was 0.5%, and that the developed method would thus be suitable for practical analyses for the detection and quantification of MIR162.

Interlaboratory study of qualitative PCR methods for genetically modified maize events MON810, bt11, GA21, and CaMV P35S.

Qualitative PCR methods for the genetically modified (GM) maize events MON810, Bt11, and GA21, and the 35S promoter (P35S) region of the cauliflower mosaic virus (CaMV) were evaluated in an interlaboratory study. Real-time PCR-based quantitative methods for these GM events using the same primer pairs had already been validated in previous studies. Fifteen laboratories in Japan participated in this interlaboratory study. Each participant extracted DNA from blind samples, performed qualitative PCR assays, and then detected the PCR products with agarose gel electrophoresis. The specificity, sensitivity, and false-negative and false-positive rates of these methods were determined with different concentrations of GM mixing samples. LODs of these methods for MON810, Bt11, GA21, and the P35S segment calculated as the amount of MON810 were 0.2, 0.2, 0.1, and 0.2% or less, respectively, indicating that the LODs of MON810, Bt11, and P35S were lower than 10 copies, and the LOD of GA21 was lower than 25 copies of maize haploid genome. The current study demonstrated that the qualitative methods would be fit for the detection and identification of these GM maize events and the P35S segment.

[Development and validation of event-specific quantitative PCR method for genetically modified maize LY038].

In this article, we report a novel real-time PCR-based analytical method for quantitation of the GM maize event LY038. We designed LY038-specific and maize endogenous reference DNA-specific PCR amplifications. After confirming the specificity and linearity of the LY038-specific PCR amplification, we determined the conversion factor required to calculate the weight-based content of GM organism (GMO) in a multilaboratory evaluation. Finally, in order to validate the developed method, an interlaboratory collaborative trial according to the internationally harmonized guidelines was performed with blind DNA samples containing LY038 at the mixing levels of 0, 0.5, 1.0, 5.0 and 10.0%. The precision of the method was evaluated as the RSD of reproducibility (RSDR), and the values obtained were all less than 25%. The limit of quantitation of the method was judged to be 0.5% based on the definition of ISO 24276 guideline. The results from the collaborative trial suggested that the developed quantitative method would be suitable for practical testing of LY038 maize.