Preconcentration and post-column fluorescent derivatization for the environmental water monitoring of an antihelmintic macrocyclic drug used in livestock.

In this paper, a green analytical methodology based on fluorescence derivatization is proposed for the anti-helminthic drug monitoring ivermectin as environmental emergent contaminant. After sample clean-up, ivermectin was converted into a highly fluorescent derivative through a catalytic oxidation process followed by dehydration and tautomerization. Under optimal experimental conditions, a linear response was obtained for ivermectin within the range 0.38-600 µg L-1, with detection and quantification limits of 0.11 and 0.38 µg L-1, both values are lower than other previously reported. This method has been applied for ivermectin determination in environmental water samples at trace levels, showing its potential for contamination monitoring.

A simple and highly selective molecular imprinting polymer-based methodology for propylparaben monitoring in personal care products and industrial waste waters.

In this work, a novel molecularly imprinted polymer (MIP) proposed as solid phase extraction sorbent was developed for the determination of propylparaben (PP) in diverse cosmetic samples. The use of parabens (PAs) is authorized by regulatory agencies as microbiological preservative; however, recently several studies claim that large-scale use of these preservatives can be a potential health risk and harmful to the environment. Diverse factors that influence on polymer synthesis were studied, including template, functional monomer, porogen and crosslinker used. Morphological characterization of the MIP was performed using SEM and BET analysis. Parameters affecting the molecularly imprinted solid phase extraction (MISPE) and elution efficiency of PP were evaluated. After sample clean-up, the analyte was analyzed by high performance liquid chromatography (HPLC). The whole procedure was validated, showing satisfactory analytical parameters. After applying the MISPE methodology, the extraction recoveries were always better than 86.15%; the obtained precision expressed as RSD% was always lower than 2.19 for the corrected peak areas. Good linear relationship was obtained within the range 8-500ngmL-1 of PP, r2=0.99985. Lower limits of detection and quantification after MISPE procedure of 2.4 and 8ngmL-1, respectively were reached, in comparison with previously reported methodologies. The development of MISPE-HPLC methodology provided a simple an economic way for accomplishing a clean-up/preconcentration step and the subsequent determination of PP in a complex matrix. The performance of the proposed method was compared against C-18 and silica solid phase extraction (SPE) cartridges. The recovery factors obtained after applying extraction methods were 96.6, 64.8 and 0.79 for MISPE, C18-SPE and silica-SPE procedures, respectively. The proposed methodology improves the retention capability of SPE material plus robustness and possibility of reutilization, enabling it to be used for PP routine monitoring in diverse personal care products (PCP) and environmental samples.

A green alternative method for analysis of ivermectin and moxidectin in environmental water samples using automatized preconcentration previous MEEKC.

Antiparasitic drugs derived from macrocyclic lactones (MLs) are widely used in livestock activities around the world. An increasing concern for local authorities is the environmental pollution as a consequence of veterinary drugs widely used in rural areas. The purpose of environmental analysis is to monitor low levels of pollutant analytes in a large number of samples. Also, due to the lipophilic characteristic of these lactones, long-chain solvents are usually required for performing sample treatment before and during the analysis. Therefore, sensitive, specific, robust, and environmentally friendly analytical methods are still required. In this paper, a new automatized preconcentration methodology followed by microemulsion electrokinetic chromatography analysis was developed for the simultaneous separation and determination of the most used MLs, ivermectin (IVM) and moxidectin (MXD) in environmental water. XAD-4 resin was employed as an adsorbent for the preconcentration process and ethanol was used as the eluent. In contrast to traditional analysis for IVM and MXD, in this methodology nonpolluting solvents were involved during the whole process and therefore, it could be considered as a contribution to green analytical chemistry. Under optimal experimental conditions, LOD obtained for IVM and MXD were of 3 × 10-3 and 3.6 × 10-3 µg/L, respectively.

Simultaneous separation of ergot alkaloids by capillary electrophoresis after cloud point extraction from cereal samples.

A new and sensitive analytical methodology for ergot alkaloids (EA) determination from cereal samples based on cloud point extraction (CPE) prior to CE-UV absorbance was developed. The methodology involves extraction under acid conditions and subsequent preconcentration by applying a simple, rapid and environmentally friendly low volume surfactant extraction procedure. After extraction, CE analysis was carried out by performing dilutions on preconcentrated surfactant rich phase, achieving a single peak or simultaneous alkaloids determination. A real preconcentration factor of 22 of total EA was obtained, demonstrating the efficiency of this methodology. The limits of detection were 2.6 and 2.2 µg/kg for ergotamine and ergonovine, respectively. Validation procedure revealed suitable linearity, accuracy and precision. The average extraction and clean-up recoveries were compared with the theoretical values and were better than 92%. This method was successfully applied to the determination of EA in different varieties of commercial flour samples, two grain samples and one of the leading brands cereal-based product for infant feeding. The high sensitivity achieved for EA determinations in real samples suggests CPE procedure as an interesting approach to improve CE-UV visible detection limits. Moreover, the whole process could be considered as a contribution to green chemistry because nonorganic solvents were involved, demonstrating its great potential over conventional techniques.

Monitoring of phenolic compounds for the quality control of Melissa officinalis products by capillary electrophoresis.

INTRODUCTION: Official assays for the quality control of Melissa officinalis L. (Lamiaceae) leaves establish the quantification of total hydroxycinnamic derivatives expressed as rosmarinic acid. OBJECTIVE: The goal of this work was to develop a simple, fast and reliable method for monitoring the phenolic composition in herbs from the Lamiaceae family and for rapidly detecting M. officinalis adulteration or substitution in commercial medicinal samples in Argentina. METHODOLOGY: A capillary zone electrophoresis (CZE) method was performed under the following conditions: the background electrolyte (BGE) consisted of 20 m m sodium tetraborate buffer, pH 9.2; the applied voltage was 25 kV; the capillary and sample temperatures were kept at 25 °C; the hydrodynamic mode was selected for the sample injection (3.45 kPa during 5 s). RESULTS: A CZE method that achieved the separation and simultaneous determination of eight related phenolic compounds in less than 11 min was optimised for application to control quality analysis of M. officinalis-based products. The method was validated according to the US Federal Drug Agency requirements and offers advantages in terms of analysis time, cost and operation. CONCLUSIONS: The proposed methodology can be applied to the standardisation and quality control of plant material and phytopharmaceutical products derived from the Lamiaceae family, as indicated by the results obtained in the analysis of commercial medicinal products in Argentina.

Trace element profile of a wild edible mushroom (Suillus granulatus).

Seventeen elements, Al, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Na, Ni, P, Pb, V, and Zn (macroelements and trace elements) were investigated by Atomic Spectrometries on a particular wild edible mushroom collected in the central region of Argentina during 2 different years in the same season. The metal content profile in Suillus granulatus samples is given. The found quantities of Na, K, Ca, Mg, Fe, P, V, and Al were 0.40, 10.84, 0.48, 0.30, 0.57, 4.24, 0.18, and 1.23 g/kg dry weight, respectively. The levels of Li, Cu, Zn, Cd, Co, Ni, Cr, and Mn were 0.98, 23.02, 22.30, 0.26, 0.16, 1.17, 0.90, and 28.75 mg/kg dry weight, respectively. Pb was not detected at the investigated levels. The results indicate that the levels of metals in the analyzed samples are not considered to be a health risk. In order to demonstrate the validity of our method, a recovery study was performed with acceptable results.

Analysis of potential adulteration in herbal medicines and dietary supplements for the weight control by capillary electrophoresis.

Four different phytopharmaceutical dosage forms for use in weight control programs were analyzed. Two different ground herbal blends and their correspondent infusions, a capsule and a tincture were investigated for the presence of compounds used as adulterants in these products. A capillary electrophoresis (CE) method was developed and validated. The optimized experimental conditions were: BGE, sodium tetraborate buffer 20mM, pH 9.2, voltage applied 30kV, capillary temperature 25°C, injection sample at 0.5Psi during 5s. Ephedrine, norephedrine, caffeine and furosemide were baseline separated in less than 7min; the migration times were found to be 2.65, 2.90, 3.75 and 6.58min, respectively. The analysis showed in sample 3 concentrations of 0.45±0.03mgg(-1) (ephedrine), 0.33±0.02mgg(-1) (norephedrine), 1.09±0.41mgg(-1) (caffeine) and 0.80±0.17mgg(-1) (furosemide). Caffeine content in samples 1, 2 and 4 was 0.61±0.06mgg(-1), 15.66±1.05mgg(-1) and 2.27±0.13mgml(-1), respectively. Linearity was obtained in the concentration range of 1-1000µgml(-1). Limits of detection (LOD) and quantification (LOQ) were determined as 0.42µgml(-1) and 1.40µgml(-1) (ephedrine), 0.47µgml(-1) and 1.40µgml(-1) (norephedrine), 0.12µgml(-1) and 0.48µgml(-1) (caffeine), 0.22µgml(-1) and 0.73µgml(-1) (furosemide). The common constituents of the samples did not interfere with the potential adulterants. Repeatability was better than 0.24% RSD for the retention time and 1.43% for the peak area. Intermediate precision was tested by changing the capillary, the day of operation and the operator, in all the cases the %RSD was better than 3.06.

Determination of heavy metals for the quality control in Argentinian herbal medicines by ETAAS and ICP-OES.

The determination of trace elements in Hypericum perforatum leaves and flowers, their teas, tinctures and tablets was carried out by Electrothermal Atomic Absorption Spectrometry (ETAAS) and Ultrasonic Nebulization System coupled to Inductively Coupled Plasma Optical Emission Spectrometry (USN-ICP-OES). Hypericum perforatum (St. John's wort), is a phytomedicine used for the treatment of depression. Samples were collected from different sources in the argentinian market. Heavy metals contents in the investigated samples were found at different levels. Chromium and cobalt were undetectable above their limits of detection in both liquid and solid samples; while aluminum, cadmium, lead, iron and vanadium were present in the majority of samples. The analytical results obtained for all metals indicate that they were present at concentration well below the acceptable daily intake recommended by the World Health Organization. Based on the results obtained in the present work, it is concluded that the present techniques are suitable for the routine determination of heavy metals concentration in phytopharmaceuticals.

Determination of metal content in valerian root phytopharmaceutical derivatives by atomic spectrometry.

Phytopharmaceuticals containing Valerian are used as mild sleep-inducing agents. The elemental composition of 3 different marks of Valeriana officinalis roots commercially available in the Argentinian market, their teas, and a commercial tincture have been studied. The content of Al, Ca, Cd, Co, Cr, Cu, Fe, Li, Mn, Ni, Pb, V, and Zn was determined in phytopharmaceuticals by flame atomic emission/absorption spectrometry, electrothermal atomic absorption spectrometry, and ultrasonic nebulization coupled to inductively coupled plasma-optical emission spectrometry. Prior to analyses of the samples, a digestion procedure was optimized. The analytical results obtained for Fe, Al, Ca, and V in the solid sample study were within the range 100-1000 mg/kg, and for Mn, Zn, and Pb within the range 10-100 mg/kg. Cadmium was found at levels up to 0.0125 mg/kg.

Development and validation of a capillary electrophoresis method for the determination of codeine, diphenhydramine, ephedrine and noscapine in pharmaceuticals.

The present work describes a simple, accurate and rapid method for the separation and simultaneous determination of codeine, diphenhydramine, ephedrine and noscapine present in cough-cold syrup formulations by capillary zone electrophoresis. Factors affecting the separation were the buffer pH and concentration, applied voltage, and presence of additives. Separations were carried out in less than 10 min with a 20 mM sodium tetraborate buffer, pH 8.50. The carrier electrolyte gave baseline separation with good resolution, great reproducibility and accuracy. Calibration plots were linear over at least three orders of magnitude of analyte concentrations, the lower limits of detection being within the range 0.42-1.33 microg ml(-1). Detection was performed by UV absorbance at wavelengths of 205 and 250 nm. Quantification of the components in actual syrup formulations was calculated against the responses of freshly prepared external standard solutions. The method was validated and met all analysis requirements of quality assurance and quality control. The procedure was fast and reliable and commercial pharmaceuticals could be analyzed without prior sample clean-up procedure.

Comparative study between capillary electrophoresis and high performance liquid chromatography in 'guarana' based phytopharmaceuticals.

The last years have seen a significant increase in the use of herbal medicines and their preparations all over the world. Adulterations with synthetic drugs are common problems with phytopharmaceutical products and this can potentially cause adverse effects. In consequence, it is important to determine the presence of synthetic drugs in herbal medicines to ensure their efficacy and safety. In this study, guarana derivatives were analyzed by capillary electrophoresis (CE), and the results were compared with those obtained by the HPLC technique. In order to obtain adequate fingerprints, and search for adulterants, caffeine was used as the marker compound. This separation method was applied to analyze the seed powder and commercial tablets of Paulinia cupana Mart. The methodology performance was evaluated in terms of specificity, sensitivity and precision. The results are in agreement with those obtained by the HPLC method. Furthermore, the analysis time of the CE method is up to two times shorter than the respective parameter in HPLC and solvent consumption is more than 100-fold less.

Metal content monitoring in Hypericum perforatum pharmaceutical derivatives by atomic absorption and emission spectrometry.

Metals have been investigated in different plant materials in order to establish their normal concentration range and consider their role in plants as part of human medicinal treatment. Metal monitoring as a pattern recognition method is a promising tool in the characterization and/or standardization of phytomedicines. In the present work measurable amounts of Ca, Cu, K, Li, Mg, Mn, Na, Ni, and Zn were detected in phytopharmaceutical derivatives of Hypericum perforatum by atomic techniques. Atomic methodologies like flame atomic absorption spectrometry (FAAS) and electrothermal atomic absorption spectrometry (ETAAS) allow reliable determination of mineral content in pharmaceutical quality control of medicinal plants. Additionally, capillary electrophoresis (CE) patterns of characteristic components (fingerprints) have been performed for the search of adulterants in phytopharmaceutical products.

Simultaneous determination of dextromethorphan, diphenhydramine and phenylephrine in expectorant and decongestant syrups by capillary electrophoresis.

The separation of basic nitrogenous compounds commonly used as active ingredients in cold medicine formulations by micellar electrokinetic capillary chromatography and capillary zone electrophoresis with direct absorptiometric detection was investigated. The type and composition of the background electrolyte (BGE) were investigated with respect to separation selectivity and BGE stability. BGE of 10 mM sodium dihydrogenphosphate-sodium tetraborate buffer containing 10 mM SDS and 10% acetonitrile, pH 9.0 was found to be optimal. Dextromethorphan hydrobhromide, diphenhydramine hydrochloride and phenylephrine hydrochloride were baseline-separated in less than 11 min, giving separation efficiencies of up to 494,000 theoretical plates, reproducibility of corrected peaks areas below 3% relative standard deviation and concentration detection limits from 2.5 to 5.5 microg ml(-1). Detection was performed at 196 and 214 nm.