Efficient electrocatalytic oxygen reduction reaction of thermally optimized carbon black supported zeolitic imidazolate framework nanocrystals under low-temperature.

Turning commercially available low-cost conducting carbon black materials into functional electrocatalytic electrode media using simple surface chemical modification is a highly attractive approach. This study reports on remarkably enhanced oxygen electrocatalytic activity of commercially available Ketjenblack (KB) by growing a non-precious cobalt metal-based zeolitic-imidazolate framework (ZIF-67) at room temperature in methanol solution followed by a mild thermolysis. The resulting Co@CoOx nanoparticle decorated nitrogen-doped KB derived from the optimized ZIF-67 : KB weight ratio of hybrid samples at 500-600 °C shows high performance for the oxygen reduction reaction (ORR) with impressive Eonset and E1/2 values of ∼0.90 and ∼0.83 V (vs. RHE), respectively in 0.1 M KOH electrolyte. Such ORR activity is comparable to, or better than many metal@metal-oxide-carbon based electrocatalysts synthesized under elevated carbothermal temperatures and using multicomponent/multistep chemical modification conditions. Therefore, a simple electrocatalyst design reported in this work is an efficient synthesis route that not only utilises earth-abundant carbon black but also comprises scalable room temperature synthesized ZIF-67 following mild thermolysis conditions under 600 °C.

Understanding and Optimizing Capacitance Performance in Reduced Graphene-Oxide Based Supercapacitors.

Reduced graphene-oxide (RGO)-based electrodes in supercapacitors deliver high energy/power capacities compared to typical nanoporous carbon materials. However, extensive critical analysis of literature reveals enormous discrepancies (up to 250 F g-1 ) in the reported capacitance (variation of 100-350 F g-1 ) of RGO materials synthesized under seemingly similar methods, inhibiting an understanding of capacitance variation. Here, the key factors that control the capacitance performance of RGO electrodes are demonstrated by analyzing and optimizing various types of commonly applied electrode fabrication methods. Beyond usual data acquisition parameters and oxidation/reduction properties of RGO, a substantial difference of more than 100% in capacitance values (with change from 190 ± 20 to 340 ± 10 F g-1 ) is found depending on the electrode preparation method. For this demonstration, ≈40 RGO-based electrodes are fabricated from numerous distinctly different RGO materials via typically applied methods of solution (aqueous and organic) casting and compressed powders. The influence of data acquisition conditions and capacitance estimation practices are also discussed. Furthermore, by optimizing electrode processing method, a direct surface area governed capacitance relationship for RGO structures is revealed.

Pure Curcumin Spherulites from Impure Solutions via Nonclassical Crystallization.

Crystallization experiments performed with highly supercooled solutions produced highly pure (>99 wt %) and highly crystalline mesocrystals of curcumin from impure solutions (∼22% of two structurally similar impurities) in one step. These mesocrystals exhibited a crystallographic hierarchy and were composed of perfectly or imperfectly aligned nanometer-thick crystallites. X-ray diffraction and spectroscopic analysis confirmed that the spherulites are a new solid form of curcumin. A theoretical hypothesis based on particle aggregation, double nucleation, and repeated secondary nucleation is proposed to explain the spherulite formation mechanism. The experimental results provide, for the first time, evidence for an organic molecule to naturally form spherulites without the presence of any stabilizing agents. Control experiments performed with highly supercooled pure solutions produced spherulites, confirming that the formation of spherulites is attributed to the high degree of supercooling and not due to the presence of impurities. Likewise, control experiments performed with a lower degree of supercooling produced impure crystals of curcumin via classical molecular addition mechanisms. Collectively, these experimental observations provide, for the first time, evidence for particle-mediated crystallization as an alternate and efficient method to purify organic compounds.

Synthesis and Optimization of Zeolitic Imidazolate Frameworks for the Oxygen Evolution Reaction.

Metal-organic frameworks/zeolitic imidazolate frameworks (MOFs/ZIFs) and their post-synthesis modified nanostructures, such as oxides, hydroxides, and carbons have generated significant interest for electrocatalytic reactions. In this work, a high and durable oxygen evolution reaction (OER) performance directly from bimetallic Zn100-x Cox -ZIF samples is reported, without carrying out high-temperature calcination and/or carbonization. ZIFs can be reproducibly and readily synthesized in large scale at ambient conditions. The bimetallic ZIFs show a systematic and gradually improved OER activity with increasing cobalt concentration. A further increase in OER activity is evidenced in ZIF-67 polyhedrons with controlled particle size of <200 nm among samples of different sizes between 50 nm and 2 µm. Building on this, a significantly enhanced, >50 %, OER activity is obtained with ZIF-67/carbon black, which shows a low overpotential of approximately 320 mV in 1.0 m KOH electrolyte. Such activity is comparable to or better than numerous MOF/ZIF-derived electrocatalysts. The optimized ZIF-67 sample also exhibits increased activity and durability over 24 h, which is attributed to an in situ developed active cobalt oxide/oxyhydroxide related nanophase.

High-Performance Zinc-Air Batteries with Scalable Metal-Organic Frameworks and Platinum Carbon Black Bifunctional Catalysts.

Metal-organic framework (MOF)-related derivatives have generated significant interest in numerous energy conversion and storage applications, such as adsorption, catalysis, and batteries. However, such materials' real-world applicability is hindered because of scalability and reproducibility issues as they are produced by multistep postsynthesis modification of MOFs, often with high-temperature carbonization and/or calcination. In this process, MOFs act as self-sacrificial templates to develop functional materials at the expense of severe mass loss, and the resultant materials exhibit complex process-performance relationships. In this work, we report the direct applicability of a readily synthesized and commercially available MOF, a zeolitic imidazolate framework (ZIF-8), in a rechargeable zinc-air battery. The composite of cobalt-based ZIF-8 and platinum carbon black (ZIF-67@Pt/CB) prepared via facile solution mixing shows a promising bifunctional electrocatalytic activity for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR), the key charge and discharge mechanisms in a battery. ZIF-67@Pt/CB exhibits long OER/ORR activity durability, notably, a significantly enhanced ORR stability compared to Pt/CB, 85 versus 52%. Interestingly, a ZIF-67@Pt/CB-based battery delivers high performance with a power density of >150 mW cm-2 and long stability for 100 h of charge-discharge cyclic test runs. Such remarkable activities from as-produced ZIF-67 are attributed to the electrochemically driven in situ development of an active cobalt-(oxy)hydroxide nanophase and interfacial interaction with platinum nanoparticles. This work shows commercial feasibility of zinc-air batteries as MOF-cathode materials can be reproducibly synthesized in mass scale and applied as produced.

Size-Related Electrochemical Performance in Active Carbon Nanostructures: A MOFs-Derived Carbons Case Study.

Metal-organic framework-derived carbon nanostructures have generated significant interest in electrochemical capacitors and oxygen/hydrogen catalysis reactions. However, they appear to show considerably varied structural properties, and thus exhibit complex electrochemical-activity relationships. Herein, a series of carbon polyhedrons of different sizes, between 50 nm and µm, are synthesized from zeolitic imidazolate frameworks, ZIF-8 (ZIF-derived carbon polyhedrons, ZDCPs) and their activity is studied for capacitance and the oxygen reduction reaction (ORR). Interestingly, a well-correlated performance relationship with respect to the particle size of ZDCPs is evidenced. Here, the identical structural features, such as specific surface area (SSA), microporosity, and its distribution, nitrogen doping, and graphitization are all strictly maintained in the ZDCPs, thus allowing identification of the effect of particle size on electrochemical performance. Supercapacitors show a capacity enhancement of 50 F g-1 when the ZDCPs size is reduced from micrometers to ≤200 nm. The carbonization further shows a considerable effect on rate capacitance-ZDCPs of increased particle size lead to drastically reduced charge transportability and thus inhibit their performance for both the charge storage and the ORR. Guidelines for the capacitance variation with respect to the particle size and SSA in such carbon nanostructures from literature are presented.

Tunable Covalent Triazine-Based Frameworks (CTF-0) for Visible-Light-Driven Hydrogen and Oxygen Generation from Water Splitting.

Covalent triazine-based frameworks (CTFs), a group of semiconductive polymers, have been identified for photocatalytic water splitting recently. Their adjustable band gap and facile processing offer great potential for discovery and development. Here, we present a series of CTF-0 materials fabricated by two different approaches, a microwave-assisted synthesis and an ionothermal method, for water splitting driven by visible-light irradiation. The material (CTF-0-M2) synthesized by microwave technology shows a high photocatalytic activity for hydrogen evolution (up to 7010 µmol h-1 g-1), which is 7 times higher than another (CTF-0-I) prepared by conventional ionothermal trimerization under identical photocatalytic conditions. This leads to a high turnover number (TON) of 726 with respect to the platinum cocatalyst after seven cycles under visible light. We attribute this to the narrowed band gap, the most negative conduction band, and the rapid photogenerated charge separation and transfer. On the other hand, the material prepared by the ionothermal method is the most efficient one for oxygen evolution. CTF-0-I initially produces ca. 6 times greater volumes of oxygen gas than CTF-0-M2 under identical experimental conditions. CTF-0-I presents an apparent quantum efficiency (AQY) of 5.2% at 420 nm for oxygen production without any cocatalyst. The activity for water oxidation exceeds that of most reported CTFs due to a large driving force for oxidation and a large number of active sites. Our findings indicate that the band positions and the interlayer stacking structures of CTF-0 were modulated by varying synthesis conditions. These modulations impact the optical and redox properties, resulting in an enhanced performance for photocatalytic hydrogen and oxygen evolution, confirmed by first-principles calculations.

Tunable Bifunctional Activity of Mnx Co3-x O4 Nanocrystals Decorated on Carbon Nanotubes for Oxygen Electrocatalysis.

Noble-metal-free electrocatalysts are attractive for cathodic oxygen catalysis in alkaline membrane fuel cells, metal-air batteries, and electrolyzers. However, much of the structure-activity relationship is poorly understood. Herein, the comprehensive development of manganese cobalt oxide/nitrogen-doped multiwalled carbon nanotube hybrids (Mnx Co3-x O4 @NCNTs) is reported for highly reversible oxygen reduction and evolution reactions (ORR and OER, respectively). The hybrid structures are rationally designed by fine control of surface chemistry and synthesis conditions, including tuning of functional groups at surfaces, congruent growth of nanocrystals with controllable phases and particle sizes, and ensuring strong coupling across catalyst-support interfaces. Electrochemical tests reveal distinctly different oxygen catalytic activities among the hybrids, Mnx Co3-x O4 @NCNTs. Nanocrystalline MnCo2 O4 @NCNTs (MCO@NCNTs) hybrids show superior ORR activity, with a favorable potential to reach 3 mA cm-2 and a high current density response, equivalent to that of the commercial Pt/C standard. Moreover, the hybrid structure exhibits tunable and durable catalytic activities for both ORR and OER, with a lowest overall potential of 0.93 V. It is clear that the long-term electrochemical activities can be ensured by rational design of hybrid structures from the nanoscale.

Design of 3D Graphene-Oxide Spheres and Their Derived Hierarchical Porous Structures for High Performance Supercapacitors.

Graphene-oxide (GO) based porous structures are highly desirable for supercapacitors, as the charge storage and transfer can be enhanced by advancement in the synthesis. An effective route is presented of, first, synthesis of three-dimensional (3D) assembly of GO sheets in a spherical architecture (GOS) by flash-freezing of GO dispersion, and then development of hierarchical porous graphene (HPG) networks by facile thermal-shock reduction of GOS. This leads to a superior gravimetric specific capacitance of ≈306 F g-1 at 1.0 A g-1 , with a capacitance retention of 93% after 10 000 cycles. The values represent a significant capacitance enhancement by 30-50% compared with the GO powder equivalent, and are among the highest reported for GO-based structures from different chemical reduction routes. Furthermore, a solid-state flexible supercapacitor is fabricated by constructing the HPG with polymer gel electrolyte, exhibiting an excellent areal specific capacitance of ≈220 mF cm-2 at 1.0 mA cm-2 with exceptional cyclic stability. The work reveals a facile but efficient synthesis approach of GO-based materials to enhance the capacitive energy storage.

Salt Templating with Pore Padding: Hierarchical Pore Tailoring towards Functionalised Porous Carbons.

We propose a new synthetic route towards nanoporous functional carbon materials based on salt templating with pore-padding approach (STPP). STPP relies on the use of a pore-padding agent that undergoes an initial polymerisation/ condensation process prior to the formation of a solid carbon framework. The pore-padding agent allows tailoring hierarchically the pore-size distribution and controlling the amount of heteroatom (nitrogen in this case) functionalities as well as the type of nitrogen (graphitic, pyridinic, oxides of nitrogen) incorporated within the carbon framework in a single-step-process. Our newly developed STPP method offers a unique pathway and new design principle to create simultaneously high surface area, microporosity, functionality and pore hierarchy. The functional carbon materials produced by STPP showed a remarkable CO2 /N2 selectivity. At 273 K, a carbon with only micropores offered an exceptionally high CO2 adsorption capacity whereas a carbon with only mesopores showed promising CO2 -philicity with high CO2 /N2 selectivity in the range of 46-60 %, making them excellent candidates for CO2 capture from flue gas or for CO2 storage.

Superacidity in Nafion/MOF Hybrid Membranes Retains Water at Low Humidity to Enhance Proton Conduction for Fuel Cells.

A hybrid membrane of superacid sulfated Zr-MOF (SZM) and Nafion shows much superior performance to Nafion, particularly for fuel cell operating under low humidity. The Brønsted acidic sites in SZM networks retain an ample amount of water which facilitated proton conduction under low humidity. The water retention properties of Nafion-SZM hybrid membranes with 1 wt % loading of SZM increased at 35% relative humidity and outperformed commercial unfilled Nafion membrane. The proton conductivity increases by 23% for Nafion-SZM hybrid compared to unfilled Nafion membrane. The Nafion-SZM membrane also shows higher performance stability at 35% relative humidity than Nafion, as confirmed by close monitoring of the change of open circuit voltage for 24 h.

An Ultrahigh Pore Volume Drives Up the Amine Stability and Cyclic CO2 Capacity of a Solid-Amine@Carbon Sorbent.

Carbon monoliths of ultrahigh pore volume (5.35 cm(3) g(-1) ) and high surface area (2700 m(2) g(-1) ) accommodate a record high level of amine(tetraethylenepentamine), up to 5 g g(-1) within its hierarchically networked micro-/mesopores over a wide range. Thus, this solid-amine@carbon shows exceptional CO2 sorption and stable cyclic capacities at simulated flue-gas conditions.

Tuning of ZIF-Derived Carbon with High Activity, Nitrogen Functionality, and Yield - A Case for Superior CO2 Capture.

A highly effective and facile synthesis route is developed to create and tailor metal-decorated and nitrogen-functionalized active microporous carbon materials from ZIF-8. Clear metal- and pyrrolic-N-induced enhancements of the cyclic CO2 uptake capacities and binding energies are achieved, particularly at a much lower carbonization temperature of 700 °C than those often reported (1000 °C). The high-temperature carbonization can enhance the porosity but only at the expense of considerable losses of sample yield and metal and N functional sites. The findings are comparatively discussed with carbons derived from metal-organic frameworks (MOFs) reported previously. Furthermore, the porosity of the MOF-derived carbon is critically dependent on the structure of the precursor MOF and the crystal growth. The current strategy offers a new and effective route for the creation and tuning of highly active and functionalized carbon structures in high yields and with low energy consumption.

Sodium magnesium amidoborane: the first mixed-metal amidoborane.

The first example of a mixed-metal amidoborane Na(2)Mg(NH(2)BH(3))(4) has been successfully synthesized. It forms an ordered arrangement in cation coordinations, i.e., Mg(2+) bonds solely to N(-) and Na(+) coordinates only with BH(3). Compared to ammonia borane and monometallic amidoboranes, Na(2)Mg(NH(2)BH(3))(4) can release 8.4 wt% pure hydrogen with significantly less toxic gases.