RESUMO
Heat and mass transfer rate by using nanofluids is a fundamental aspect of numerous industrial processes. Its importance extends to energy efficiency, product quality, safety, and environmental responsibility, making it a key consideration for industries seeking to improve their operations, reduce costs, and meet regulatory requirements. So, the principal objective of this research is to analyze the heat and mass transfer rate for three-dimensional magneto hydrodynamic nanoliquid movement with thermal radiation and chemical reaction over the dual stretchable surface in the existence of an inclined magnetization, and viscous dissipation. The flow is rotating with constant angular speed [Formula: see text] about the axis of rotation because such flows occur in the chemical processing industry and the governing equations of motion, energy, and concentration are changed to ODEs by transformation. The complex and highly nonlinear nature of these equations makes them impractical to solve analytically so tackled numerically at MATLAB. The obtained numerical results are validated with literature and presented through graphs and tables. Increasing the Eckert number from [Formula: see text] a higher Nusselt and Sherwood number was noted for the hybrid nanofluid. By changing the angle of inclination [Formula: see text], the [Formula: see text] performance is noted at 8% for nanofluid and 33% for hybrid nanofluid. At the same time, [Formula: see text] performance of 0.5% and 2.0% are observed respectively. Additionally, as the angle of inclination increases the skin friction decreases and the chemical reaction rate increases the mass transmission rate.
RESUMO
The current article aims to examine the magnetohydrodynamics (MHD) impact on the flow of MgO-Ag/water-based hybrid nanoliquid with motile microorganisms and the fluid is allowed to flow over a Riga plate subject to slip effects and activation energy. Furthermore, the presence of a uniform heat source/sink is also addressed in the energy equation. In addition to this, the thermophoresis effect is highlighted in the concentration equation. From the present proposed model, we get a non-linear system of the governing equations. The obtained system of partial differential equations (PDEs) is converted to the dimensionless system of ordinary differential equations (ODEs) using the similarity transformation. The obtained high non-linear system of equations has been solved numerically, using the parametric continuation method (PCM). In the present analysis, the main motivation is to highlight the heat transfer rate of MgO-Ag/water-based hybrid nanofluid flow over a Riga plate. The second motivation of the present research is to highlight the impact of slip conditions on the velocity, energy, and mass profiles. From the graphical analysis, it is depicted that the slip conditions reduce the velocity, energy, and mass outlines. From the present analysis, we concluded that volume friction reduced the flow profile while increasing the temperature of the fluid flow over a Riga plate. All the parameters of the present research are highlighted in velocity temperature and concertation of the fluid. In addition to this in all the figures we have compared the hybrid nanofluid with mono nanofluid and the also the comparison between slip and no-slip conditions have carried out through graphs for velocity, temperature, and concentration.
RESUMO
Due to enhanced heat transfer rate, the nanofluid and hybrid nanofluids have significant industrial uses. The principal objective of this exploration is to investigate how thermal radiation influences the velocity and temperature profile. A water-based rotational nanofluid flow with constant angular speed [Formula: see text] is considered for this comparative study. A similarity conversion is applied to change the appearing equations into ODEs. Three different nanoparticles i.e., copper, aluminum, and titanium oxide are used to prepare different nanofluids for comparison. The numerical and graphical outputs are gained by employing the bvp-4c procedure in MATLAB. The results for different constraints are represented through graphs and tables. Higher heat transmission rate and minimized skin friction are noted for triple nanoparticle nanofluid. Skin coefficients in the x-direction and y-direction have reduced by 50% in trihybrid nanofluid by keeping mixed convection levels between the range [Formula: see text]. The heat transmission coefficient with raising the levels of thermal radiation between [Formula: see text] and Prandlt number [Formula: see text] has shown a 60% increase.
RESUMO
The flow of fluid over a spinning disk has a broad scope of numerous applications. It is employed in various things, including medical equipment, the braking system of cars, gas turbines, plastic films, and glass production. As a result of these applications, we considered the phenomena of Darcy Forchheimer's three-dimensional flow on TiO2-Fe3O4 nanoparticles suspended in based CMC-water fluid. The influence of thermal radiation and convective conditions is studied. Moreover, the Buongiorno model is utilized to compute the Brownian motion and the thermophoretic effect. To generate the non-dimensionalized governing equations, suitable alterations are put into use. These equations are then utilized with Matlab BVP4c. Graphs are used to analyze the behavior of velocity distributions, and thermal and concentration profiles at different parameter values. In addition, the solutions to the flow problem have been analyzed in terms of several other physical variables on velocity, temperature, concentration, drag force, heat, and mass transfer. According to the findings, it is clear that an escalates in the value of the rotation parameter leads to an increase in the radial velocity and axial velocity. In contrast, an opposite pattern is followed in the Forchheimer number. Finally, some engineering quantities are evaluated numerically and presented in tabular forms.
RESUMO
In the present study, a biomass-based multi-purpose energy system that can generate power, desalinated water, hydrogen, and ammonia is presented. The gasification cycle, gas turbine, Rankine cycle, PEM electrolyzer, ammonia production cycle using the Haber-Bosch process, and MSF water desalination cycle are the primary subsystems of this power plant. On the suggested system, a thorough thermodynamic and thermoeconomic evaluation has been conducted. For the analysis, the system is first modeled and investigated from an energy point of view, after which it is similarly studied from an exergy point of view before the system is subjected to economic analysis (exergoeconomic analysis). The system is evaluated and modeled using artificial intelligence to aid in the system optimization process after energy, exergy, and economic modeling and analysis. The resulting model is then optimized using a genetic algorithm to maximize system efficiency and reduce system expenses. EES software does the first analysis. After that, it sends the data to MATLAB program for optimization and to see how operational factors affect thermodynamic performance and overall cost rate. To find the best solution with the maximum energy efficiency and lowest total cost, multi-objective optimization is used. In order to shorten computation time and speed up optimization, the artificial neural network acts as a middleman in the process. In order to identify the energy system's optimal point, the link between the objective function and the choice factors has been examined. The results show that increasing the flow of biomass enhances efficiency, output, and cost while raising the temperature of the gas turbine's input decreases cost while simultaneously boosting efficiency. Additionally, according to the system's optimization results, the power plant's cost and energy efficiency are 37% and 0.3950$/s, respectively, at the ideal point. The cycle's output is estimated at 18900 kW at this stage.
Assuntos
Amônia , Inteligência Artificial , Fenômenos Físicos , Temperatura Baixa , ÁguaRESUMO
A hybrid energy cycle (HEC) based on biomass gasification can be suggested as an efficient, modern and low-carbon energy power plant. In the current article, a thermodynamic-conceptual design of a HEC based on biomass and solar energies has been developed in order to generate electric power, heat and hydrogen energy. The planned HEC consists of six main units: two electric energy production units, a heat recovery unit (HRU), a hydrogen energy generation cycle based on water electrolysis, a thermal power generation unit (based on LFR field), and a biofuel production unit (based on biomass gasification process). Conceptual analysis is based on the development of energy, exergy and exergoeconomic assessments. Besides that, the reduction rate of pollutant emission through the planned HEC compared to conventional power plants is presented. In the planned HEC, when hydrogen energy is not needed, excess hydrogen is feed into the combustion chamber to improve system performance and reduce the need for natural gas. Accordingly, the rate of polluting gases emitted from the cycle can be mitigated due to the reduction of fossil fuels consumption. Further, based on the machine learning technique (MLT), the level of biofuel produced from the mentioned process is estimated. In this regard, two algorithms (i.e., Support vector machine and Gaussian process regression) have been employed to develop the prediction model. The findings indicated that the considered HEC can produce about 10.2 MW of electricity, 153 kW of thermal power, and 71.8 kmol/h of hydrogen energy. In both training and testing sets, the Support vector machine model exhibits better behavior compared the two Gaussian process regression model. Based on machine learning technique, with increasing gasification pressure, the level of biofuel obtained from the process does not increase significantly.
Assuntos
Biocombustíveis , Gás Natural , Biomassa , Carbono , Hidrogênio , TermodinâmicaRESUMO
This research analyzes the three-dimensional magneto hydrodynamic nanofluid flow through chemical reaction and thermal radiation above the dual stretching surface in the presence of an inclined magnetic field. Different rotational nanofluid and hybrid nanofluids with constant angular velocity [Formula: see text] for this comparative study are considered. The constitutive relations are used to gain the equations of motion, energy, and concentration. This flow governing extremely non-linear equations cannot be handled by an analytical solution. So, these equations are transformed into ordinary differential equalities by using the similarity transformation and then handled in MATLAB by applying the boundary values problem practice. The outcomes for the considered problem are accessed through tables and graphs for different parameters. A maximum heat transfer amount is observed in the absence of thermal radiation and when the inclined magnetic field and axis of rotation are parallel.
RESUMO
The current problem is concerned with the study of magnetohydrodynamic ternary hybrid nanofluid flow over two distinct geometries i.e., cone and wedge. The ternary hybrid nanoliquid with MHD has a lot of engineering and industrial applications. In polymer data processing, cone and wedge geometries are frequently utilized. Therefore, the present problem is designed to the flow of ternary hybrid nanoliquid over multiple geometries. Hybrid nanoliquids performed well in the heat transport rate as compared to the nanoliquid and conventional liquid. Here in this study, the idea of ternary hybrid nanoliquid is introduced to improve the energy and mass transmissions which show more satisfactory results in the thermal and mass transmission performance. The impacts of chemical reaction and thermal radiation are also executed in this model. The formulation of the present study is performed in the form of PDEs which are then transformed into the ODEs by using suitable similarity transformations. The homotopic analysis scheme is implemented for the semi-analytical solution of the existing model. Some major results that materialize from the present simplification are that; the tri-hybrid nanoliquid velocity is greater for the rising nanoparticles volume fractions. The enlargement in radiation parameter enlarged the tri-hybrid nanoliquid thermal profile. The mass transfer rate of the ternary hybrid nanoliquid is lesser for the Schmidt number and chemical reaction. Intensification in nanoparticles volume fractions and radiation parameter has increased the ternary hybrid nanofluid heat rate transfer for both cone and wedge geometries.
RESUMO
This communication elaborates the irreversibility analysis of the flow of Prandtl nanofluid along with thermal radiation past a permeable stretched surface embedded in a Darcy-Forchheimer medium. The activation and chemical impressions along with effects of thermophoretic and Brownian motion are as well examined. The flow symmetry of the problem is modeled mathematically and leading equations are rehabilitated into nonlinear ordinary differential equations (ODEs) through the assistance of suitable similarity variables. The Keller-box technique in MATLAB is employed to draw the impacts of the contributing elements on the velocity field, temperature distribution, and concentration. The impact of the Prandtl fluid parameter has mounting performance for the velocity whereas conflicting behavior is examined in the temperature profile. The achieved numerical results are matched correspondingly with the present symmetrical solutions in restrictive cases and fantastic agreement is scrutinized. In addition, the entropy generation uplifts for the growing values of the Prandtl fluid parameter, thermal radiation, and Brinkman number and decreases for growing numbers of the inertia coefficient parameter. It is also discovered that the coefficient of friction decreases for all parameters involved in the momentum equation. Features of nanofluids can be found in a variety of real-world fields, including microfluidics, industry, transportation, the military, and medicine.
RESUMO
This work presented modeling and simulation of CO2 from natural gas. One of the most promising technologies is Pressure Swing Adsorption (PSA), which is an energy-efficient and cost-effective process for separating and capturing CO2 from industrial processes and power plants. This paper provides an overview of the PSA process and its application for CO2 capture, along with a discussion of its advantages, limitations, and future research directions. This process is pressure swing adsorption (PSA) with four adsorption beds. The adsorption bed columns fill with activated carbon as adsorbent. In this simulation momentum, mass and energy balance are solved simultaneously. The process was designed with two beds in adsorption conditions and the other two beds in desorption conditions. The desorption cycle includes blow-down and purge steps. The linear driving force (LDF) estimates the adsorption rate in modeling this process. The extended Langmuir isotherm is used for the equilibrium between solid and gas phases. The temperature changes by heat transfer from the gas phase to solid and axial heat dispersion. The set of partial differential equations is solved using implicit finite difference.
Assuntos
Dióxido de Carbono , Gás Natural , Carvão Vegetal , Adsorção , Temperatura AltaRESUMO
The dominant characteristics of hybrid nanofluids, including rapid heat transfer rates, superior electrical and thermal conductivity, and low cost, have effectively piqued the interest of global researchers. The current study will look at the impacts of a silver and cobalt ferrite-based hybrid nanofluid with MHD between a revolving disk and cone. The collection of partial differentiable equations is converted into a set of ODEs via similarity transformations. We used the Homotopy analysis approach from the BVPh 2.0 package to solve the ordinary differential equations. The volume proportion of nanoparticles increases and the temperature distribution profile also increased. It is more efficient for metallurgical, medicinal, and electrical applications. Furthermore, the antibacterial capabilities of silver nanoparticles might be used to restrict the growth of bacteria. A circulating disc with a stationary cone has been identified to provide the optimal cooling of the cone disc device while maintaining the outer edge temperature constant. This study's findings might be useful in materials science and engineering. The usage of hybrid nanofluid in heat transfer and heat pumps, coolants in manufacturing and production, producing cooling, refrigerators, solar thermal collectors, and heating, air conditioning, and climate control applications are only a few examples.
RESUMO
The temperature dependent thermophysical fluid properties have numerous aspects in different industries and engineering processes in which heat transmission is based on fluid flow. For such heat transmission processes, heat transmission system is highly fluctuated with variation of viscosity. Thus, the aim of this study is to investigate the transfer of heat in magnetized Carreau fluid with chemical reaction and under influence of thermal radiation over nonlinear stretching/shrinking surface. Additionally, we have incorporated variable heat dependent thermophysical properties to analyze the heat transfer in magnetized Carreau fluid. Set of flow governing non linear PDE's are obtained using Carreau fluid tensor and boundary layer approximation (BLA) theory. Dimensionless set of ODE's are obtained using suitable similarity transforms. Shooting method in conjunction with Newton's method have been utilized to solve the problem. It is noted that when stretching [Formula: see text] is significant with strictly increasing mass suction [Formula: see text] shear stress rate increase with minor levels and sharp increase has been observed in Nusselt number, whereas in shrinking case [Formula: see text] shear stress and heat transfer coefficient values are improved raising the value of [Formula: see text] mass suction. Further, raising the values of power law index [Formula: see text] produce reduced skin friction over stretching surface [Formula: see text] while skin friction dramatically enhance in shrinking case [Formula: see text]. It is observed that raising the non-linearity [Formula: see text] values for stretching or shrinking, skin friction and Nusselt number considerably improved. Moreover, computational outcomes of the study are validated with already published previous results and the results obtained in this study are found in good agreement.
RESUMO
In comparison to Newtonian fluids, non-Newtonian fluids have fascinating features in heat transportation. Here, newly type of Reiner-Rivlinnanoliquid flow over the revolving disk for viscous dissipation (VD) is being explored in a multiple-slip effect. The inclusion of gyrotactic microorganisms in the nanoliquid enhances the tendency of the nanoparticles. The idea of the intended model is enhanced by considering in the impact of activation energy, thermal radiative, heated convective conditions and entropy minimization. The system of nonlinear PDE is constructed into nonlinear ODE's by applying the von-Karman similarity method and later solved numerically using the BVP4c solver which is considered to study the complicated ordinary differential equations. TheInfluence of various parameters is elaborated and plotted physically through the graphical illustration. By contrasting the reported data in the restricted form to a previously published article, the accuracy of the current model has examined. The impact of a non-Newtonian fluid parameter over the velocity field appeared to showdpreciation in it. The results elucidate that when the wall slip coefficient is larger more torque is needed to maintain constant disk revaluation. Surface heat transmission and wall skin friction are computed for a wide variety of factors. These flows have several real world-applications, including modeling cases that occur in oceanography and geophysics, various industrial fields (such as lumber production).
RESUMO
This research investigates the two different hybrid nanofluid flows between two parallel plates placed at two different heights, y0 and yh, respectively. Water-based hybrid nanofluids are obtained by using Al2O3, TiO2 and Cu as nanoparticles, respectively. The upper-level plate is fixed, while the lower-level plate is stretchable. The fluid rotates along the y-axis. The governing equations of momentum, energy and concentration are transformed into partial differential equations by using similarity transformations. These transformed equations are grasped numerically at MATLAB by using the boundary value problem technique. The influence of different parameters are presented through graphs. The numerical outcomes for rotation, Nusselt, Prandtl, and Schmidt numbers are obtained in the form of tables. The heat transfer rate increases by augmentation in the thermophoresis parameter, while it decays by increasing the Reynolds number. Oxide nanoparticles hybrid nanofluid proved more efficient as compared to mixed nanoparticles hybrid nanofluid. This research suggests using oxide nanoparticles for good heat transfer.
RESUMO
Inclusion of nanoparticles boosts thermal performance and is essential for thermal transport. The current investigation has been made to conduct research on heat mass transport in synovial material with the mixing of hybrid and tri-hybrid comprising variable viscosity past over a heated surface having constant density and a steady environment. The conservation laws have been considered in the presence of Lorentz force, heat generation/absorption, modified heat and mass fluxes together with chemical reaction. The mathematical model is developed in Cartesian coordinate in the form of coupled partial differential equation (PDEs). The derived PDEs are simplified by a boundary layer approach (BLA) and reduced PDEs have been converted into ordinary differential equation (ODEs) using scaling group Similarity transformation. The converted ODEs are highly nonlinear and have been solved numerically by finite elements scheme (FES). The used scheme is effective for nonlinear problem and can be frequently utilized to tackle nonlinear problems arising in mathematical physics.
Assuntos
Nanoestruturas , Líquido Sinovial , Viscosidade , Análise de Elementos Finitos , SuspensõesRESUMO
This study is aimed to explore the magneto-hydrodynamic Carreau fluid flow over a stretching/shrinking surface with a convectively heated boundary. Temperature-dependent variable thermophysical properties are utilized to formulate the problem. The flow governing equations are obtained with boundary layer approximation and constitutive relation of the Carreau fluid. The shooting method is utilized to obtain graphical and numeric outcomes. Additionally, initial guesses are generated with the help of Newton's method. The effect of Weissenberg number, Magnetization, stretching ratio, Prandtl number, suction/blowing parameter, and Lewis number is obtained on velocity, temperature and species continuity profile and analyzed. Shear stress rates and Nusselt number outcomes under body forces influences are present in tabulated data and discussed. It is observed that in absence of magnetization force, B = 0 and strong mass suction 5≤S≤7.5 effect high rates of Nusselt number is obtained. It is concluded that under the influence of power law index and non-linearity parameter maximum heat transfer and reduced shear stress rates are obtained.
RESUMO
Chirps are familiar in nature, have a built-in resistance to noise and interference, and are connected to a wide range of highly oscillatory processes. Detecting chirp oscillating patterns by traditional Fourier series is challenging because the chirp frequencies constantly change over time. Estimating such types of functions considering the partial sums of a Fourier series in Fourier analysis does not permit an approximate solution, which entails more Fourier coefficients required for signal reconstruction. The standard Fourier series, therefore, has a poor convergence rate and is an inadequate approximation. In this study, we use a parameterized orthonormal basis with an adjustable parameter to match the oscillating behavior of the chirp to approximate linear chirps using the partial sums of a generalized Fourier series known as fractional Fourier series, which gives the best approximation with only a small number of fractional Fourier coefficients. We used the fractional Fourier transform to compute the fractional Fourier coefficients at sample points. Additionally, we discover that the fractional parameter has the best value at which fractional Fourier coefficients of zero degrees have the most considerable magnitude, leading to the rapid decline of fractional Fourier coefficients of high degrees. Furthermore, fractional Fourier series approximation with optimal fractional parameters provides the minimum mean square error over the fractional Fourier parameter domain.
RESUMO
The utilization of Fourier's law of heat conduction provides the parabolic partial differential equation of thermal transport, which provides the information regarding thermal transport for the initial time, but during many practical applications, this theory is not applicable. Therefore, the utilization of modified heat flux model is to be used. This work discusses the utilization of non-Fourier heat flux model to investigate thermal performance of tri-hybrid nanoparticles mixture immersed in Carreau Yasuda material past over a Riga plate by using Hamilton Crosser and Yamada Ota models considering the variable thermos-physical characteristics. The phenomenon presenting the transport of momentum and energy are developed in the form of coupled partial differential equations, which are complex and then transformed into ordinary differential equations by using an appropriate transformation. The transformed equations have been tackled numerically via finite element scheme and the authenticity of obtained solution is shown with the help of comparative analysis of present results with those are available in open literature.
Assuntos
Temperatura Alta , Modelos Teóricos , Análise de Elementos Finitos , Condutividade TérmicaRESUMO
The important feature of the current work is to consider the pressure variation, heat transport, and friction drag in the hydromagnetic radiative two-dimensional flow of a hybrid nanofluid depending on the viscous dissipation and Joule heating across a curved surface. The curved surface has been considered with the binary heating process called as prescribed heat flux and surface temperature. The basic partial differential equation (PDEs) has been converted into the non-dimensional ordinary differential equations (ODEs) by applying some specified dimensionless transformations. The bvp4c built-in package in MATLAB has been considered to find the numerical solution of the consequential equations. The graphical results have been plotted in terms of pressure, friction drag, velocity, temperature, and heat transport. Several important results have also been plotted for the plan level surface [Formula: see text]The condition of [Formula: see text]. It is found that the heat transport rate respectively reduces and enhances with the enhancement of radiation parameter and Hartmann number as well as the friction drag is enhancing with the high-volume fraction of nanoparticles and Hartmann number. Moreover, enhancing curvature parameter, enhances the friction drag and declines the heat transport rate. The current work renders uncountable applications in several engineering and industrial systems like electronic bulbs, electric ovens, geysers, soil pollution, electric kettle, fibrous insulation, etc. Moreover, the heating as well as the cooling systems of electrical, digital, and industrial instruments, are controlled by the heat transport in fluids. Thus, it is important to use such flows in these types of instruments.
RESUMO
The nanoparticles are frequently used in biomedical science for the treatment of diseases like cancer and these nanoparticles are injected in blood which is transported in the cardiovascular system on the principle of peristalsis. This study elaborates the effects of Lorentz force and joule heating on the peristaltic flow of copper and iron oxide suspended blood based nanofluid in a complex wavy non-uniform curved channel. The Brinkman model is utilized for the temperature dependent viscosity and thermal conductivity. The problem is formulated using the fundamental laws in terms of coupled partial differential equations which are simplified using the creeping flow phenomenon. The graphical results for velocity, temperature, streamlines, and axial pressure are simulated numerically. The concluded observations deduce that the solid volume fraction of nanoparticles reduces the velocity and enhance the pressure gradient and accumulation of trapping bolus in the upper half of the curved channel is noticed for temperature dependent viscosity.