Synergistic and Antagonistic Effects of the Co-Pyrolysis of Plastics and Corn Stover to Produce Char and Activated Carbon.

The physicochemical properties of char and activated carbon produced from the co-pyrolysis of corn stover (CS) and plastics, polystyrene (PS) and polyethylene terephthalate (PET), were studied. Non-isothermal gas analysis of the volatiles was conducted using an online mass spectrometer to correlate the thermal degradation of gaseous byproducts to the formation of pores in the char materials. The findings determined that the addition of PS or PET promotes the formation of the solid char product with either higher than average pore sizes or surface areas compared to control samples. The addition of PET to corn stover increases the surface area of the char formed. The char formed from a CS:PET mass ratio of 1:1 produced char with a surface area of 423.8 ± 24.8 m2/g at 500 °C and a duration of 2 h. The surface area of the chars formed from CS and PET decreased as the amount of PET decreased, showing a tendency for PET to increase the surface area of the char materials synergistically. The addition of PS to corn stover promoted the formation of chars with, on average, larger pore sizes than the control char samples. The chars were chemically activated with potassium hydroxide, and the activated carbon that formed had lower surface areas but comparable surface functional groups to the control samples. Vanillin adsorption testing showed that activated carbon from corn stover performed the best at removing 95% of the vanillin after 2 h. In contrast, the activated carbon from the chars produced from the co-pyrolysis of corn stover and polystyrene or corn stover and polyethylene terephthalate removed 45% and 46% of vanillin after 2 h, respectively. The findings suggest that plastics have a synergistic relationship in producing char precursors with improved porosity but antagonistically affect the activated carbon adsorbent properties.

Physiochemical Properties of Biochar and Activated Carbon from Biomass Residue: Influence of Process Conditions to Adsorbent Properties.

This study evaluates the influence of hydrothermal carbonization (HTC) or slow pyrolysis (SP) process conditions on the physicochemical properties of precursor biochars and activated carbon (AC). The AC is achieved through a direct or a two-step method with subsequent chemical activation using KOH. A theory is developed on the biochar propensity to be chemically activated based on the lignocellulosic structure composition. X-ray photoelectron spectroscopy elemental analysis shows that the O/C ratio decreases after chemical activation for HTC biochar but remains the same for SP biochar. X-ray powder diffraction indicates that the SP biochar and all ACs have broad amorphous carbon peaks, whereas corn stover and the HTC biochar have distinct cellulosic crystalline peaks. Vanillin adsorbent experiments were performed on various ACs with up to 98% reduction shown. The best adsorbent for vanillin was the AC produced directly from corn stover, followed by AC HTC and then AC SP.

Heterogeneous Catalyst Design Principles for the Conversion of Lignin into High-Value Commodity Fuels and Chemicals.

Lignin valorization has risen as a promising pathway to supplant the use of petrochemicals for chemical commodities and fuels. However, the challenges of separating and breaking down lignin from lignocellulosic biomass are the primary barriers to success. Integrated biorefinery systems that incorporate both homo- and heterogeneous catalysis for the upgrading of lignin intermediates have emerged as a viable solution. Homogeneous catalysis can perform selected chemistries, such as the hydrolysis and dehydration of ester or ether bonds, that are more suitable for the pretreatment and fractionation of biomass. Heterogeneous catalysis, however, offers a tunable platform for the conversion of extracted lignin into chemicals, fuels, and materials. Tremendous effort has been invested in elucidating the necessary factors for the valorization of lignin by using heterogeneous catalysts, with efforts to explore more robust methods to drive down costs. Current progress in lignin conversion has fostered numerous advances, but understanding the key catalyst design principles is important for advancing the field. This Minireview aims to provide a summary on the fundamental design principles for the selective conversion of lignin by using heterogeneous catalysts, including the pairing of catalyst metals, supports, and solvents. The review puts a particular focus on the use of bimetallic catalysts on porous supports as a strategy for the selective conversion of lignin. Finally, future research on the valorization of lignin is proposed on the basis of recent progress.

Learning crisis resource management: Practicing versus an observational role in simulation training - a randomized controlled trial.

AIM: Simulation training has been shown to be an effective way to teach crisis resource management (CRM) skills. Deliberate practice theory states that learners need to actively practice so that learning is effective. However, many residency programs have limited opportunities for learners to be "active" participants in simulation exercises. This study compares the effectiveness of learning CRM skills when being an active participant versus being an observer participant in simulation followed by a debriefing. METHODS: Participants were randomized to two groups: active or observer. Active participants managed a simulated crisis scenario (pre-test) while paired observer participants viewed the scenario via video transmission. Then, a trained instructor debriefed participants on CRM principles. On the same day, each participant individually managed another simulated crisis scenario (post-test) and completed a post-test questionnaire. Two independent, blinded raters evaluated all videos using the Ottawa Global Rating Scale (GRS). RESULTS: Thirty-nine residents were included in the analysis. Normally distributed data were analyzed using paired and unpaired t-tests. Inter-rater reliability was 0.64. Active participants significantly improved from pre-test to post-test (P=0.015). There was no significant difference between the post-test performance of active participants compared to observer participants (P=0.12). CONCLUSION: We found that learning CRM principles was not superior when learners were active participants compared to being observers followed by debriefing. These findings challenge the deliberate practice theory claiming that learning requires active practice. Assigning residents as observers in simulation training and involving them in debriefing is still beneficial.