European Society of Endodontology position statement: Surgical extrusion, intentional replantation and tooth autotransplantation: European Society of Endodontology developed by.

This European Society of Endodontology (ESE) position statement on surgical extrusion, intentional replantation and tooth autotransplantation represents the consensus of an expert committee, convened by the ESE. A narrative review in the International Endodontic Journal (Plotino et al. 2020, international Endodontic Journal, 53, 1636-52) formed the basis for the position statement. The review provided detailed information on the background, clinical procedures and the outcome of surgical extrusion, intentional replantation and tooth autotransplantation techniques. The aim of the current statement is to summarize the best available evidence on these clinical techniques to provide appropriate clinical guidance to undergraduate and postgraduate students, dental practitioners, clinical teachers and researchers. The current position statement will be updated by the ESE periodically to reflect new evidence as it becomes available to provide the most current treatment guidance for clinical practice.

Clinical procedures and outcome of surgical extrusion, intentional replantation and tooth autotransplantation - a narrative review.

Surgical extrusion is defined as the procedure in which the remaining tooth structure is repositioned at a more coronal/supragingival position in the same socket in which the tooth was located originally. Intentional replantation is defined as the deliberate extraction of a tooth and after evaluation of root surfaces, endodontic manipulation and repair, placement of the tooth back into its original position. Tooth autotransplantation is defined as the transplantation of an unerupted or erupted tooth in the same individual, from one site to another extraction site or a new surgically prepared socket. The advent of titanium implant rehabilitation has reduced the use of these treatments in day-by-day clinical practice; however, the re-emerging trend to conserve and preserve natural sound tissues has led to a rediscovery of these treatments. All three distinct surgical methods are closely related, as they act to treat teeth that cannot be predictably treated using other more conventional procedures in endodontics, periodontics and restorative dentistry. Furthermore, these procedures share the same treatment approach and include the atraumatic extraction of a tooth, visual inspection of the tooth/root and its subsequent replantation. The clinical procedures for surgical extrusion, intentional replantation and tooth autotransplantation treatment have undergone several changes in recent years, and currently, there are no clear clinical treatment protocols/guidelines available. The clinician should be aware of the outcome of these treatments. Hence, the aim of this narrative review is to provide the background, clinical procedures and outcomes of surgical extrusion, intentional replantation and tooth autotransplantation.

C-shaped canal configuration in mandibular premolars and molars: Prevalence, correlation, and differences: An In Vivo study using cone-beam computed tomography.

AIMS: To evaluate the prevalence, correlation, and differences of C-shaped canal morphology in mandibular premolars and molars by means of cone-beam computed tomography (CBCT). MATERIALS AND METHODS: A total of 1433 mandibular premolars and molars CBCT scans from the Saudi population were evaluated. Axial sections of the roots were acquired at coronal, middle, and apical levels to evaluate C-shaped canals types. The prevalence, correlation, differences of C-shaped canals, bilateral/unilateral presence, gender differences, and location of external grooves on roots were assessed. RESULTS: The prevalence of C-shaped canals in the first premolars was 1.5%, 0.80% in second premolars and 7.9% in second molars, whereas C-shaped canals were absent in first molars. No correlation was found between the presence of C-shaped canals within premolars and molars and between the two groups in the same individual. Both premolars and molars exhibited different types of C-shaped canals, C2 being predominant in premolars and C3 in second molars. Longitudinal external grooves were mostly located on mesiolingual (ML) surface in premolars and lingual in molars. Females showed more prevalence of C-shaped canals in second molars and no differences in premolars. Bilateral symmetry and unilateral presence in premolars and second molars were not significant. CONCLUSIONS: Although the prevalence of C-shaped canals is significantly higher in mandibular second molars, they are also found in mandibular premolars but in small percentages. No significant differences were found between both genders and both sides. Since they exhibit unpredictable morphology and differences across the root length, the use of small field CBCT is recommended when such anatomy is presented in a tooth indicated for root canal treatment for better management.

Microbial contamination of brand new nickel-titanium endodontic instruments.

AIMS: This study aims to estimate the microbial presence on the surface of different brand new NiTi endodontic instruments for clinical use. MATERIAL AND METHODS: Eleven different types of NiTi rotary endodontic instruments, obtained from their fresh opened original packages, were assigned to three different groups, according to packaging type and sterilization and tested for bacterial contamination. Isolated bacteria were identified by using standard microbiological methods and then counted. Differences observed in groups were analyzed statistically by using the one-way analysis of variance (ANOVA) for dependent samples and the Tukey HSD post hoc test. RESULTS: Statistical differences were found between instruments delivered in plastic boxes which bacterial count resulted higher than those obtained from instruments delivered in blisters (p<0.01). CONCLUSIONS: Some brand new endodontic instruments showed degrees of bacterial contamination that both quantitatively and qualitatively deserve to be considered in clinical procedures.

Measurement of torque generated during intracanal instrumentation in vivo.

AIM: To compare two different clinical techniques when using endodontic rotary instruments by monitoring the torque in vivo. METHODOLOGY: Ten single-rooted maxillary anterior teeth were prepared by an endodontist using size 25, .06 taper TF rotary instruments (KerrEndo, Orange, CA, USA). All instruments were rotated at 500 rpm with maximum torque set at 2.5 N cm using an endodontic motor (Kavo, Biberach, Germany), which automatically recorded the torque values every 1/10 of a second. Instruments were used with two modi operandi: (i) Inward action: short-length intermittent progression with slight apical pressure aiming to reach the working length (also known as pecking motion), followed by (ii) Outward action: lateral brushing action selectively directed to address the canal circumference whilst removing instruments in the coronal direction. The mean, maximum and accumulated torque values were recorded and analysed statistically (t-test and Wilcoxon test) with a significance level set at 5%. None of the recorded values exceeded the selected torque limit. RESULTS: A significant difference between inward and outward actions was found regarding the evaluated parameters (P < 0.05). The outward action (brushing) was significantly safer (requiring less torque) compared to the inward action (pecking). CONCLUSIONS: Torque measurements during in vivo instrumentation provided useful information regarding the techniques evaluated. Although the torque limit was not reached by any of the two actions, the technique impacted significantly on the torque applied to the instrument.

Fatigue Resistance of New and Used Nickel-Titanium Rotary Instruments: a Comparative Study.

OBJECTIVES: Aim of the present study was twofold. First, to evaluate in vitro, the performance of two different NiTi rotary instruments in one molar case; then, to evaluate their resistance to cyclic fatigue, compared to new ones. MATERIAL AND METHODS: 25 ProTaper Next (PTN) nickel-titanium (NiTi) instruments (Maillefer-Dentsply, Baillagues, CH) for each of the following two sizes: X1 (17.04 ) and X2 (25.06) were randomly divided into two groups. The first group (n = 10) immediately under- went to a cyclic fatigue test. The second group (n = 15) was initially used to prepare 15 extracted molar teeth and then subjected to a cyclic fatigue test. Same was done for 25 Horizen (HZ) instruments (Kerr Endodontics, Orange, Ca) for each of the following two sizes: 20.04 and 25.06. Instruments were rotated in curved artificial canal until fracture occurred and times to fracture were recorded. All data were collected and statistically analyzed using a variance test (confidence interval CI = 95%). RESULTS: HZ reached working length more rapidly than PTN, and with less deformations. For the fatigue tests, all the new instruments were significantly more resistant than the used ones. The HZ instru- ments were significantly more resistant in all sizes than PTN, both when new and used instruments were tested. CONCLUSIONS: Since in previous studies ProTaper Next demonstra- ted a better resistance to cyclic fatigue than most of nickel-titanium instruments, Horizen's performance put them in a high rank amongst the most resistant nickel-titanium rotary instruments.

A preliminary assessment of a new dedicated endodontic software for use with CBCT images to evaluate the canal complexity of mandibular molars.

AIM: To investigate in vivo the complexity of canals within mesial roots of mandibular molars using 3D Endo™ software linked to CBCT images. METHODOLOGY: The CBCT images of 100 mandibular first molars were analysed using the 3D Endo™ software. The number of canals in the mesial roots, the presence of apical confluences, the canal lengths and the canal configurations using Vertucci's classification were evaluated in buccolingual (BL) and mesiodistal (MD) views. The software allowed the visualization of canal trajectories in three dimensions using a coloured outline, which was used to develop a new objective scoring system to provide an overall assessment of canal complexity. Data were analysed statistically using anova and t-tests with the significance set at P < 0.05. RESULTS: Vertucci type IV canals were found in 44% of the cases, whilst 54% were type II. The mean distance from the apical foramen to the orifice was 13.15 mm (±1.21) and that between a confluence and the foramen, 2.81 mm (±1.13). The number of curvatures and the canal complexity scores in the MD view were significantly higher than in the BL view (P < 0.05). The scores were not directly correlated to the canal (MB versus ML), to the canal length or to the presence of confluences. CONCLUSIONS: 3D Endo software features the automatic detection and measurement of several anatomical canal parameters, and is a promising tool for the study of canal complexity in vivo. The unpredictable anatomy of the mesial roots of mandibular molars highlights the value of a three-dimensional preoperative evaluation of each case. The proposed scoring system aims to provide the clinician with an overall assessment of canal complexity.

Clinical application of MOSkin dosimeters to rectal wall in vivo dosimetry in gynecological HDR brachytherapy.

PURPOSE: Three MOSkins dosimeters were assembled over a rectal probe and used to perform in vivo dosimetry during HDR brachytherapy treatments of vaginal cancer. The purpose of this study was to verify the applicability of the developed tool to evaluate discrepancies between planned and measured doses to the rectal wall. MATERIALS AND METHODS: MOSkin dosimeters from the Centre for Medical Radiation Physics are particularly suitable for brachytherapy procedures for their ability to be easily incorporated into treatment instrumentation. In this study, 26 treatment sessions of HDR vaginal brachytherapy were monitored using three MOSkin mounted on a rectal probe. A total of 78 measurements were collected and compared to doses determined by the treatment planning system. RESULTS: Mean dose discrepancy was determined as 2.2±6.9%, with 44.6% of the measurements within ±5%, 89.2% within ±10% and 10.8% higher than ±10%. When dose discrepancies were grouped according to the time elapsed between imaging and treatment (i.e., group 1: ≤90min; group 2: >90min), mean discrepancies resulted in 4.7±3.6% and 7.1±5.0% for groups 1 and 2, respectively. Furthermore, the position of the dosimeter on the rectal catheter was found to affect uncertainty, where highest uncertainties were observed for the dosimeter furthest inside the rectum. CONCLUSIONS: This study has verified MOSkin applicability to in-patient dose monitoring in gynecological brachytherapy procedures, demonstrating the dosimetric rectal probe setup as an accurate and convenient IVD instrument for rectal wall dose verification. Furthermore, the study demonstrates that the delivered dose discrepancy may be affected by the duration of treatment planning.

The Influence of a New Clinical Motion for Endodontic Instruments on the Incidence of Postoperative Pain.

OBJECTIVES: Previous studies showed that motor motions play an important role in determining apical extrusion of debris. Therefore a new clinical motion (MIMERACI) has been proposed. The basic idea is to progress slowly (1mm advancement), and after each 1mm, to remove the instrument from the canal, clean flutes and irrigate. The aim of the study was to prove whether the clinical use of MIMERACI technique would influence or not postoperative pain. MATERIALS AND METHODS: 100 teeth requesting endodontic treatment were selected for the study and divided into two similar groups based on anatomy, pre-operative symptoms and vitality, presence or absence of periapical lesion. All teeth were shaped, cleaned and obturated by the same operator, using the same NiTi instruments. The only difference between the two groups was the instrumentation technique: tradional (group A) vs MIMERACI (group B). Assessment of postoperative pain was performed 3 days after treatment. Presence, absence and degree of pain were recorded with a visual analogue scale (VAS), validated in previous studies. Collected data statistically analyzed using one-way ANOVA post hoc Tukey test. RESULTS: For VAS pain scores MIMERACI technique showed significantly better results than group A (p=0,031). Overall, both incidence and intensity of symptoms were significantly lower. Flare ups occurred in 3 patients, but none treated with the MIMERACI Technique. CONCLUSIONS: Since extruded debris can elicit more postoperative pain, results obtained by using MIMERACI technique are probably due to many factors: better mechanical removal and less production of debris and more efficient irrigation during instrumentation.

Shaping ability of two nickel-titanium instruments activated by continuous rotation or adaptive motion: a micro-computed tomography study.

OBJECTIVES: The objective of the study was to evaluate the shaping ability of curved root canals using Twisted File Adaptive (TFA) files (SybronEndo, Orange, CA) and Mtwo (Sweden & Martina, Padova, Italy) activated by continuous rotation or adaptive motion. MATERIALS AND METHODS: Thirty-two mandibular molars with two separate mesial canals and severe angles of curvature were selected. Each canal was randomly assigned to one of the four experimental groups (n = 16): TFA and Mtwo files used in continuous rotation (groups 1 and 3) or in adaptive motion (groups 2 and 4). Root canals before and after preparation were assessed by micro-computed tomography. Volume, surface area, canal transportation, and centering ability were recorded and analyzed using two-way analyses of variance. RESULTS: Volume and surface area increased less with TFA files in continuous rotation than in other groups (P < 0.001 and P < 0.01, respectively, for each comparison) that were not different (P > 0.05). TFA files had significantly less transportation and higher centering ability than Mtwo both in continuous and adaptive motion (P < 0.0001). Centering ratio, but not canal transportation, was improved by adaptive motion compared with continuous rotation for both instruments (P < 0.01). However, no differences were found in canal transportation and centering ability in the apical third for both instruments and motions (P > 0.05). CONCLUSIONS: No difference between the devices and kinematics was found in the apical third; TFA performed significantly better in the middle and coronal parts of the root canal. CLINICAL RELEVANCE: The use of NiTi files made by heat-treated alloy and/or adaptive motion could improve the qualities of root canal shaping rather than the use of conventional NiTi instruments and/or continuous rotation in the coronal and middle thirds of the root canals, but not in the apical one. Moreover, these findings encourage the use of adaptive motion with conventional NiTi files to improve centering ability without affecting other preparation qualities of root canals.

Study of suitability of Fricke-gel-layer dosimeters for in-air measurements to characterise epithermal/thermal neutron beams for NCT.

The reliability of Fricke gel dosimeters in form of layers for measurements aimed at the characterization of epithermal neutron beams has been studied. By means of dosimeters of different isotopic composition (standard, containing (10)B or prepared with heavy water) placed against the collimator exit, the spatial distribution of gamma and fast neutron doses and of thermal neutron fluence are attained. In order to investigate the accuracy of the results obtained with in-air measurements, suitable MC simulations have been developed and experimental measurements have been performed utilizing Fricke gel dosimeters, thermoluminescence detectors and activation foils. The studies were related to the epithermal beam designed for BNCT irradiations at the research reactor LVR-15 (Rez). The results of calculation and measurements have revealed good consistency of gamma dose and fast neutron 2D distributions obtained with gel dosimeters in form of layers. In contrast, noticeable modification of thermal neutron fluence is caused by the neutron moderation produced by the dosimeter material. Fricke gel dosimeters in thin cylinders, with diameter not greater than 3mm, have proved to give good results for thermal neutron profiling. For greater accuracy of all results, a better knowledge of the dependence of gel dosimeter sensitivity on radiation LET is needed.

Measurements of 2D distributions of absorbed dose in protontherapy with Gafchromic EBT3 films.

A study of the response of EBT3 films to protons has been carried out with the aim of finding a simple modality to achieve dose images in which the effect of the film sensitivity dependence on radiation LET is amended. Light transmittance images (around 630 nm) were acquired by means of a CCD camera and the difference of optical density was assumed as dosimeter response. The calibration of EBT3 film was performed by means of protons of 173.61 MeV. Some EBT3 films were exposed, in a solid-water phantom, to proton beams of three different energies (89.17 MeV, 110.96 MeV and 130.57 MeV) and the obtained depth-dose profiles were compared with the calculated profiles. From the ratios of calculated and measured Bragg peaks, a trend of the decrease in EBT3 sensitivity with increasing peak depth has been deduced. A method for correcting the data measured with EBT3 films, utilizing the file of irradiation planning data, has been proposed and tested. The results confirm that the method can be advantageously applied for obtaining spatial distribution of the absorbed dose in proton therapy.

Measurements of gamma dose and thermal neutron fluence in phantoms exposed to a BNCT epithermal beam with TLD-700.

Gamma dose and thermal neutron fluence in a phantom exposed to an epithermal neutron beam for boron neutron capture therapy (BNCT) can be measured by means of a single thermoluminescence dosemeter (TLD-700). The method exploits the shape of the glow curve (GC) and requires the gamma-calibration GC (to obtain gamma dose) and the thermal-neutron-calibration GC (to obtain neutron fluence). The method is applicable for BNCT dosimetry in case of epithermal neutron beams from a reactor because, in most irradiation configurations, thermal neutrons give a not negligible contribution to the TLD-700 GC. The thermal neutron calibration is not simple, because of the impossibility of having thermal neutron fields without gamma contamination, but a calibration method is here proposed, strictly bound to the method itself of dose separation.

Online in vivo dosimetry in high dose rate prostate brchytherapy with MOSkin detectors: in phantom feasibility study.

MOSkin detectors were studied to perform real-time in vivo dose measurements in high dose rate prostate brachytherapy. Measurements were performed inside an urethral catheter in a gel phantom simulating a real prostate implant. Measured and expected doses were compared and the discrepancy was found to be within 8.9% and 3.8% for single MOSkin and dual-MOSkin configurations, respectively. Results show that dual-MOSkin detectors can be profitably adopted in prostate brachytherapy treatments to perform real-time in vivo dosimetry inside the urethra.

Methods for dose measurements in small phantoms irradiated at BNCT epithermal column.

Suitable dosimeter methods have been proposed and tested, to measure the different dose contributions in small phantoms exposed to epithermal/thermal neutron beams designed for BNCT. One method is based on Fricke-gel dosimeter in small tubes of 2.8mm of external diameter, that allow determining profiles of gamma dose and of boron dose. The other method is based on the use of TLD-700 chips, from whose answer the contribution of thermal neutrons is subtracted by means of appropriate parameters of the glow curve.

Cyclic fatigue resistance of two reciprocating nickel-titanium instruments after immersion in sodium hypochlorite.

AIM: To assess resistance to cyclic fatigue of reciprocating nickel-titanium ( NiTi ) files (Reciproc and WaveOne) after immersion in NaOCl solution over several time periods. METHODOLOGY: A total of 90 new Reciproc R25 and WaveOne Primary were tested. The 45 files of the same brand were randomly assigned to three groups (n = 15) and submitted to the following immersion protocol in 5% NaOCl at 37 °C for 16 mm: no immersion (control), 1 or 5 min dynamically. The dynamic immersion and the following cyclic fatigue tests were performed using the appropriate preset reciprocation modes ('RECIPROC ALL' or 'WAVEONE ALL') in a specially designed endodontic motor. Resistance to cyclic fatigue was determined by recording time to fracture (TtF) in a stainless steel artificial canal with a 60° angle of curvature and 5 mm radius of curvature. The artificial canal was manufactured reproducing the instrument's size and taper. Data were analysed by 2-way analyses of variance. RESULTS: Resistance to cyclic fatigue of the same NiTi file was not significantly affected by immersion in NaOCl . Reciproc R25 was associated with a higher cyclic fatigue resistance in all groups compared to WaveOne Primary (P < 0.0001). CONCLUSIONS: Reciprocating dynamic immersion in NaOCl for 1 or 5 min did not reduce the cyclic fatigue resistance of NiTi files significantly. However, the type of reciprocating instrument influenced cyclic fatigue resistance with Reciproc R25 being more resistant than WaveOne Primary.

Solid state TL detectors for in vivo dosimetry in brachytherapy.

In vivo dosimetry provides information about the actual dose delivered to the patient treated with radiotherapy and can be adopted within a routinary treatment quality assurance protocol. Aim of this study was to evaluate the feasibility of performing in vivo rectal dosimetry by placing thermoluminescence detectors directly on the transrectal ultrasound probe adopted for on-line treatment planning of high dose rate brachytherapy boosts of prostate cancer patients. A suitable protocol for TLD calibration has been set up. In vivo measurements resulted to be in good agreement with the calculated doses, showing that the proposed method is feasible and returns accurate results.

Cyclic fatigue analysis of twisted file rotary NiTi instruments used in reciprocating motion.

AIM: To evaluate the cyclic fatigue fracture resistance of engine-driven twisted file (TF) instruments under reciprocating movement. METHODOLOGY: A sample of 30 size 25, 0.08 taper NiTi TF instruments was tested in a simulated canal with 60˚ angle of curvature and a 3 mm radius. During mechanical testing, different movement kinematics were used at a constant speed, which resulted in three experimental groups (each group n = 10). The instruments from the first group (G1) were rotated until fracture occurred. The instruments in the second (G2) and third group (G3) were driven under reciprocating movement with different angles of reciprocation. The time of fracture for each instrument was measured, and statistical analysis was performed using one-way analysis of variance followed by Tukey's Honestly Significant Different test. RESULTS: Reciprocating movement resulted in a significantly longer cyclic fatigue life (P < 0.0001) when compared with continuous rotation. No difference was found between reciprocation 150° clockwise/30° counterclockwise (CW/CCW) and 30° CW/150° CCW. CONCLUSIONS: The reciprocating movement was associated with an extended cyclic fatigue life of the TF size 0.25, 0.08 taper instruments in comparison with conventional rotation.

Cyclic fatigue of Reciproc and WaveOne reciprocating instruments.

AIM: To evaluate the cyclic fatigue resistance of Reciproc(®) and WaveOne(®) instruments in simulated root canals. METHODOLOGY: Two groups of 15 NiTi endodontic instruments of identical tip size of 0.25 mm were tested, group A; Reciproc(®) R25 and group B: WaveOne(®) primary. Cyclic fatigue testing was performed in a stainless steel artificial canal manufactured by reproducing the instrument's size and taper. A simulated root canal with a 60° angle of curvature and 5-mm radius of curvature was constructed for both the instruments tested. The centre of the curvature was 5 mm from the tip of the instrument and the curved segment of the canal was approximately 5 mm in length. The Reciproc(®) instruments were activated using the preset programme specific for the Reciproc(®) instruments, whilst the WaveOne(®) instruments were activated using the preset programme specific for the WaveOne(®) instruments. All instruments were rotated until fracture occurred and the time to fracture (TtF) and the length of the fractured tip were recorded and registered. Means and standard deviations of TtF and fragment length were calculated for each system and data were subjected to Student's t-test (P < 0.05). RESULTS: A statistically significant difference (P < 0.05) was noted between Reciproc(®) and WaveOne(®) instruments. Reciproc(®) R25 instruments were associated with a significant increase in the mean time to fracture when compared with primary WaveOne(®) instruments (130.8 ± 18.4 vs. 97.8 ± 15.9 s). There was no significant difference (P > 0.05) in the mean length of the fractured fragments between the instruments. CONCLUSIONS: Reciproc(®) instruments were associated with a significantly higher cyclic fatigue resistance than WaveOne(®) instruments.