RESUMO
Crystal phase transitions can form a new type of heterojunction with different atomic arrangements in the same material: crystal phase heterojunction (CPHJ). The CPHJ has an inherently strong impact on band engineering without concerns over critical thicknesses with misfit dislocations and a semiconductor-metal transition. In-plane CPHJ was recently demonstrated in two-dimensional (2D) transition-metal dichalcogenide (TMD) materials and utilized for conventional planar field-effect transistor applications. However, scalability such as gate electrostatic control, miniaturization, and multigate structure have been limited because of the geometrical issue. Here, we demonstrated a transistor using the CPHJ with a vertical gate-all-around structure by forming a CPHJ in conventional III-V semiconductors. The CPHJ, composed of wurtzite InP nanowires with zincblende InP substrates, showed an atomically flat heterojunction without dislocations and indicated a Type-II band discontinuity across the junction. The CPHJ transistor had moderate to good gate electrostatic controllability with high on-state currents and transconductance. The CPHJ offer will provide a new switching mechanism and add a new junction and device design choice to the long history of transistors.
RESUMO
The epitaxy of the Sb-related quantum well structure has been extensively investigated. However, the GaSb facet growth in selective-area growth (SAG) and GaSb nanostructures has not been investigated because of the surface diffusion complexity and surfactant effect of Sb adatoms. Here, the growth morphology of GaSb structures in SAG was characterized via InGaAs nanowires (NWs) monolithically grown on a Si template. SAG of GaSb using NWs included four growth processes: lateral-over growth along the ⟨1Ì 10⟩ directions, axial growth along the vertical ⟨111⟩ B direction, downward step-flow growth, and desorption of Sb adatoms from the NW sidewalls. The dominant processes could be controlled by the GaSb growth temperature and could form smooth GaSb shell layers. The vertical diode of InGaAs/GaSb core-shell NWs on Si exhibited moderate rectifying properties because of the InGaAs/GaSb heterojunction band alignment. In the vertical transistor application, specific dual-carrier modulation behaviors, such as p-channel field-effect transistor and n-channel tunnel field-effect transistor modes, occurred in the same transistor architecture. This was because the carrier transport changed with respect to the bias polarity. This specific transistor behavior in the InGaAs/GaSb core-shell NW on Si would expand possibilities for integrated circuit technologies using only a single transistor structure.
RESUMO
Heteroepitaxy has inherent concerns regarding crystal defects originated from differences in lattice constant, thermal expansion coefficient, and crystal structure. The selection of III-V materials on group IV materials that can avoid these issues has however been limited for applications such as photonics, electronics, and photovoltaics. Here, we studied nanometer-scale direct integration of InGaAs nanowires (NWs) on Ge in terms of heterogenous integration and creation of functional materials with an as yet unexplored heterostructure. We revealed that changing the initial Ge into a (111)B-polar surce anabled vertical InGaAs NWs to be integrated for all In compositions examined. Moreover, the growth naturally formed a tunnel junction across the InGaAs/Ge interface that showed a rectification property with a huge current density of several kAcm-2 and negative differential resistance with a peak-to-valley current ratio of 2.8. The described approach expands the range of material combinations for high-performance transistors, tandem solar cells, and three-dimensional integrations.