Subphthalocyanine-flipper dyads for selective membrane staining.

The design, synthesis and evaluation of a subphthalocyanine-flipper (SubPc-Flipper) amphiphilic dyad is reported. This dyad combines two fluorophores that function in the visible region (420-800 nm) for the simultaneous sensing of both ordered and disordered lipidic membranes. The flipper probes part of the dyad possesses mechanosensitivity, long fluorescence lifetimes (τ = 3.5-5 ns) and selective staining of ordered membranes. On the other hand, subphthalocyanines (SubPc) are short-lifetime (τ = 1-2.5 ns) fluorophores that are insensitive to membrane tension. As a result of a Förster Resonance Energy Transfer (FRET) process, the dyad not only retains the mechanosensitivity of flippers but also demonstrates high selectivity and emission in different kinds of lipidic membranes. The dyad exhibits high emission and sensitivity to membrane tension (Δτ = 3.5 ns) when tested in giant unilamellar vesicles (GUVs) with different membrane orders. Overall, the results of this study represent a significant advancement in the applications of flippers and dyads in mechanobiology.

Development of Lightweight Mortars Using Sustainable Low-Density Glass Aggregates from Secondary Raw Materials.

In this study, different lightweight expanded glass aggregates (LEGAs) were produced from glass cullet and various carbonated wastes, through a thermal impact process. The effects of LEGA microstructure and morphology on both the adherence to the cement paste and the mechanical properties of mortars after 28 days of curing were studied. The properties of lightweight mortars made of either LEGAs or expanded clay aggregates were compared. The results demonstrated the feasibility of using LEGAs to produce glass lightweight aggregate mortar, with flexural and compressive strength values ranging from 5.5 to 8.2 MPa and from 28.1 to 47.6 MPa, respectively. The differences in mechanical properties were explained according to the microstructures of the fracture surfaces. Thus, arlite-type ceramic aggregates presented surface porosities that allowed mortar intrusion and the formation of an interconnected interface; although the surfaces of the vitreous aggregates were free from porosity due to their vitreous nature, the mortars obtained from different wastes presented compressive and flexural strengths in the range of lightweight mortars.

Silica Nanoparticle/Fluorescent Dye Assembly Capable of Ultrasensitively Detecting Airborne Triacetone Triperoxide: Proof-of-Concept Detection of Improvised Explosive Devices in the Workroom.

We describe the proof of concept of a portable testing setup for the detection of triacetone triperoxide (TATP), a common component in improvised explosive devices. The system allows for field testing and generation of real-time results to test for TATP vapor traces in air by simply using circulation of the air samples through the sensing mechanism under the air conditioning system of an ordinary room. In this way, the controlled trapping of the analyte in the chemical sensor gives reliable results at extremely low concentrations of TATP in air under real-life conditions, suitable for daily use in luggage storage for airlines or a locker room for a major sporting event. The reported fluorescent methodology is very sensitive and selective, allowing for the trapping of triacetone triperoxide in the chemical sensor to give reliable results at very low concentrations in air under ambient conditions, by comparing the fluorescence of the material before and after exposition to TATP traces in air.

HydroFlipper membrane tension probes: imaging membrane hydration and mechanical compression simultaneously in living cells.

HydroFlippers are introduced as the first fluorescent membrane tension probes that report simultaneously on membrane compression and hydration. The probe design is centered around a sensing cycle that couples the mechanical planarization of twisted push-pull fluorophores with the dynamic covalent hydration of their exocyclic acceptor. In FLIM images of living cells, tension-induced deplanarization is reported as a decrease in fluorescence lifetime of the dehydrated mechanophore. Membrane hydration is reported as the ratio of the photon counts associated to the hydrated and dehydrated mechanophores in reconvoluted lifetime frequency histograms. Trends for tension-induced decompression and hydration of cellular membranes of interest (MOIs) covering plasma membrane, lysosomes, mitochondria, ER, and Golgi are found not to be the same. Tension-induced changes in mechanical compression are rather independent of the nature of the MOI, while the responsiveness to changes in hydration are highly dependent on the intrinsic order of the MOI. These results confirm the mechanical planarization of push-pull probes in the ground state as most robust mechanism to routinely image membrane tension in living cells, while the availability of simultaneous information on membrane hydration will open new perspectives in mechanobiology.

Flipper Probes for the Community.

This article describes four fluorescent membrane tension probes that have been designed, synthesized, evaluated, commercialized and applied to current biology challenges in the context of the NCCR Chemical Biology. Their names are Flipper-TR®, ER Flipper-TR®, Lyso Flipper-TR®, and Mito Flipper-TR®. They are available from Spirochrome.

Passive coupling of membrane tension and cell volume during active response of cells to osmosis.

During osmotic changes of their environment, cells actively regulate their volume and plasma membrane tension that can passively change through osmosis. How tension and volume are coupled during osmotic adaptation remains unknown, as their quantitative characterization is lacking. Here, we performed dynamic membrane tension and cell volume measurements during osmotic shocks. During the first few seconds following the shock, cell volume varied to equilibrate osmotic pressures inside and outside the cell, and membrane tension dynamically followed these changes. A theoretical model based on the passive, reversible unfolding of the membrane as it detaches from the actin cortex during volume increase quantitatively describes our data. After the initial response, tension and volume recovered from hypoosmotic shocks but not from hyperosmotic shocks. Using a fluorescent membrane tension probe (fluorescent lipid tension reporter [Flipper-TR]), we investigated the coupling between tension and volume during these asymmetric recoveries. Caveolae depletion and pharmacological inhibition of ion transporters and channels, mTORCs, and the cytoskeleton all affected tension and volume responses. Treatments targeting mTORC2 and specific downstream effectors caused identical changes to both tension and volume responses, their coupling remaining the same. This supports that the coupling of tension and volume responses to osmotic shocks is primarily regulated by mTORC2.

Self-Assembly Hydrosoluble Coronenes: A Rich Source of Supramolecular Turn-On Fluorogenic Sensing Materials in Aqueous Media.

Water-soluble coronenes, that form nanoparticles by self-association, work as new fluorescent materials by complexation with cucurbit[7]uril, as well as selective turn-on fluorogenic sensors for nitroaromatic explosives with remarkable selectivity, by using only water as solvent.

Residual Strength and Drying Behavior of Concrete Reinforced with Recycled Steel Fiber from Tires.

Fiber reinforcement of concrete is an effective technique of providing ductility to concrete, increasing its flexural residual strength while reducing its potential for cracking due to drying shrinkage. There are currently a wide variety of industrial fibers on the market. Recycled steel fibers (RSF) from tires could offer a viable substitute of industrialized fibers in a more sustainable and eco-friendly way. However, mistrust exists among users, based on fear that the recycling process will reduce the performance, coupled with the difficulty of characterization of the geometry of the RSF, as a consequence of the size variability introduced by the recycling process. This work compares the behavior of RSF from tires compared with industrialized steel or polypropylene fibers, evaluating the fresh state, compressive strength, flexural residual strength, and drying behavior. The concept of Equivalent Fiber Length (EFL) is also defined to help the statistical geometrical characterization of the RSF. A microstructural analysis was carried out to evaluate the integration of the fiber in the matrix, as well as the possible presence of contaminants. The conclusion is reached that the addition of RSF has a similar effect to that of industrialized fibers on concrete's properties when added at the same percentage.

Synthesis of Fluorogenic Arylureas and Amides and Their Interaction with Amines: A Competition between Turn-on Fluorescence and Organic Radicals on the Way to a Smart Label for Fish Freshness.

We describe the synthesis of fluorogenic arylureas and amides and their interaction with primary or secondary amines under air and light in organic-aqueous mixtures to give rise to a new class of persistent organic radicals, described on the basis of their electron paramagnetic resonance (EPR), as well as UV-vis, fluorescence, NMR, and quantum mechanics calculations, and their prospective use as multi-signal reporters in a smart label for fish freshness.

Evaluation of Methodologies for Assessing Self-Healing Performance of Concrete with Mineral Expansive Agents: An Interlaboratory Study.

Self-healing concrete has the potential to optimise traditional design approaches; however, commercial uptake requires the ability to harmonize against standardized frameworks. Within EU SARCOS COST Action, different interlaboratory tests were executed on different self-healing techniques. This paper reports on the evaluation of the effectiveness of proposed experimental methodologies suited for self-healing concrete with expansive mineral additions. Concrete prisms and discs with MgO-based healing agents were produced and precracked. Water absorption and water flow tests were executed over a healing period spanning 6 months to assess the sealing efficiency, and the crack width reduction with time was monitored. High variability was reported for both reference (REF) and healing-addition (ADD) series affecting the reproducibility of cracking. However, within each lab, the crack width creation was repeatable. ADD reported larger crack widths. The latter influenced the observed healing making direct comparisons across labs prone to errors. Water absorption tests highlighted were susceptible to application errors. Concurrently, the potential of water flow tests as a facile method for assessment of healing performance was shown across all labs. Overall, the importance of repeatability and reproducibility of testing methods is highlighted in providing a sound basis for incorporation of self-healing concepts in practical applications.

The primary dipole of flipper probes.

Despite their growing popularity in biology to image membrane tension, central design principles of flipper probes have never been validated. Here we report that upon deletion of their primary dipole, from electron-poor and electron-rich dithienothiophenes, absorptions blue-shift, lifetimes shorten dramatically, and mechanosensitivity in cells vanishes not partially, but completely.

Influence of core extension and side chain nature in targeting G-quadruplex structures with perylene monoimide derivatives.

A structure-activity relationship (SAR) study in terms of G-quadruplex binding ability and antiproliferative activity of six fluorescent perylenemonoimide (PMIs) derivatives is reported. A positive charge seems to be the key to target G4. This study also reveals the importance of the element substitution in the potential biological activity of PMIs, being the polyethylene glycol (PEG) chains in the peri position responsible for their antiproliferative activity. Among them, the cationic PMI6 with two PEG chains is the most promising compound since its fluorescence is enhanced in the presence of G-quadruplex structures. Moreover, PMI6 binds to the human telomeric G-quadruplex hTelo with high affinity and displays a high antiproliferative potential towards HeLa (cervical adenocarcinoma), A549 (lung adenocarcinoma) and A2780 (ovarian adenocarcinoma) cells. Its fate can be followed inside cells thanks to its fluorescent properties: the compound is found to accumulate in the mitochondria.

Microwave Detection of Wet Triacetone Triperoxide (TATP): Non-Covalent Forces and Water Dynamics.

The water adducts of triacetone triperoxide (TATP) have been observed by using broadband rotational spectroscopy. This work opens a new way for the gas-phase detection of this improvised explosive. The observed clusters exhibit unusual water dynamics and rarely observed multicenter interactions. TATP-H2 O is formed from the D3 symmetry conformer of TATP with water lying close to the C3 axis. Water rotation around this axis with a very low barrier gives rise to the rotational spectrum of a symmetric top. The main interaction of the monohydrate is a four-center trifurcated donor Ow -H⋅⋅⋅O hydrogen bond, not observed previously in the gas phase, reinforced by a weak four-center trifurcated acceptor C-H⋅⋅⋅Ow interaction. Surprisingly, all structural signatures show the weakness of these interactions. The complex TATP-(H2 O)2 is formed from the monohydrated TATP by the self-association of water.

Fluorescent Membrane Tension Probes for Super-Resolution Microscopy: Combining Mechanosensitive Cascade Switching with Dynamic-Covalent Ketone Chemistry.

We report the design, synthesis, and evaluation of fluorescent flipper probes for single-molecule super-resolution imaging of membrane tension in living cells. Reversible switching from bright-state ketones to dark-state hydrates, hemiacetals, and hemithioacetals is demonstrated for twisted and planarized mechanophores in solution and membranes. Broadband femtosecond fluorescence up-conversion spectroscopy evinces ultrafast chalcogen-bonding cascade switching in the excited state in solution. According to fluorescence lifetime imaging microscopy, the new flippers image membrane tension in live cells with record red shifts and photostability. Single-molecule localization microscopy with the new tension probes resolves membranes well below the diffraction limit.

Synthesis and Application of Ruthenium(II) Alkenyl Complexes with Perylene Fluorophores for the Detection of Toxic Vapours and Gases.

A series of new ruthenium(II) vinyl complexes has been prepared incorporating perylenemonoimide (PMI) units. This fluorogenic moiety was functionalised with terminal alkyne or pyridyl groups, allowing attachment to the metal either as a vinyl ligand or through the pyridyl nitrogen. The inherent low solubility of the perylene compounds was improved through the design of poly-PEGylated (PEG=polyethylene glycol) units bearing a terminal alkyne or a pyridyl group. By absorbing the compounds on silica, vapours and gases could be detected in the solid state. The reaction of the complexes [Ru(CH=CH-PerIm )Cl(CO)(py-3PEG)(PPh3 )2 ] and [Ru(CH=CH-3PEG)Cl(CO)(py-PerIm )(PPh3 )2 ] with carbon monoxide, isonitrile or cyanide was found to result in modulation of the fluorescence behaviour. The complexes were observed to display solvatochromic effects and the interaction of the complexes with a wide range of other species was also studied. The study suggests that such complexes have potential for the detection of gases or vapours that are toxic to humans.

Improvement of the Concrete Permeability by Using Hydrophilic Blended Additive.

Crystalline hydrophilic additives are increasingly used as efficient methods for reducing water permeability in concrete. Their effectiveness in hindering water penetration has been proven in different cementitious materials, although scarce information has been reported concerning their action mechanism. In the present work, the efficacy of a hydrophilic blended crystalline mix (Krystaline Add1) as a water-reducing additive has been confirmed. Furthermore, an extended study about how the presence of the additive influences both the fresh state and the hardened state properties is presented. Finally, characterization techniques such as Mercury Intrusion Porosimetry (MIP), X-ray Powder Diffraction (XRD) and Back-Scattered Scanning Electron Microscopy (BSEM) with Energy Dispersive X-ray analysis (EDAX) have been used for deducing the mechanism of the additive. No significant deleterious influence on the concrete properties due to the addition of the additive has been detected. In fact, the additive seems to have provided a positive influence on the concrete given that a slight reduction in the w/c ratio for similar consistency has been detected, with the subsequent improvement of the compressive strength values. Its effectiveness as a water permeability reducing additive has shown encouraging results having reduced the water permeability by approximately 50% during testing. The action mechanism of the studied additive seems to be related to hydration reactions in the presence of water, producing new solid amorphous phases in the concrete bulk.

Synthesis of a Tetracorannulene-perylenediimide That Acts as a Selective Receptor for C60 over C70.

We report the use of a tetraborylated perylenediimide as starting material for the preparation of a tetracorannulene-perylenediimide that is able to bind up to two fullerene-C60 molecules by host-guest molecular recognition with preference over C70. Titration with fullerene-C60 is followed by a dramatic shift of the aromatic signals in 1H NMR and an initial increase in the fluorescence of the system. By this simple mechanism, fluorogenic sensing of fullerene-C60 is easily accomplished by an unprecedented fluorescent turn-on mechanism.

Manipulation of Transmembrane Transport by Synthetic K+ Ionophore Depsipeptides and Its Implications in Glucose-Stimulated Insulin Secretion in ß-Cells.

The cyclic depsipeptide cereulide toxin it is a very well-known potassium electrogenic ionophore particularly sensitive to pancreatic beta cells. The mechanistic details of its specific activity are unknown. Here, we describe a series of synthetic substituted cereulide potassium ionophores that cause impressive selective activation of glucose-induced insulin secretion in a constitutive manner in rat insulinoma INS1E cells. Our study demonstrates that the different electroneutral K+ transport mechanism exhibited by the anionic mutant depsipeptides when compared with classical electrogenic cereulides can have an important impact of pharmacological value on glucose-stimulated insulin secretion.

Potassium-Ion-Selective Fluorescent Sensors To Detect Cereulide, the Emetic Toxin of B.†cereus, in Food Samples and HeLa Cells.

We report the development of new chemical probes for cereulide, a toxic metabolite produced by specific strains of Bacillus cereus, through displacement of potassium cations from a preformed specific complex and a subsequent change in the fluorescence emission. For this purpose, we designed fluorescent probes for potassium cations that were suitable for displacement assays with cereulide from organic extracts. The fluorescence detection of natural cereulide in rice samples was achieved by using synthetic cereulide as a reference and a potassium fluorescent reporter, and this was found to be useful as a portable and fast method for the in situ detection of cereulide in food extracts. To study the fate of cereulide in live cells, we designed a procedure that was suitable for live-cell microscopy imaging of HeLa cells by comparing the cellular location of the potassium fluorogenic probe, which stained intracellular endolysosomes, in the absence and presence of cereulide; we concluded that in the presence of cereulide, the fluorescence of the probe was decreased because of complexation of the potassium ions by cereulide.

Solvent-Free Off-On Detection of the Improvised Explosive Triacetone Triperoxide (TATP) with Fluorogenic Materials.

A fluorogenic perylenediimide-functionalized polyacrylate capable of generating color and fluorescence changes in the presence of triacetone triperoxide TATP), an improvised explosive used in terrorist attacks, under solvent-free, solid-state conditions has been developed. The material works by accumulating volatile TATP until it reaches a threshold; therefore, triggering colorimetric and fluorescent responses.