Significant Roles of Surface Hydrides in Enhancing the Performance of Cu/BaTiO2.8 H0.2 Catalyst for CO2 Hydrogenation to Methanol.

Tuning the anionic site of catalyst supports can impact reaction pathways by creating active sites on the support or influencing metal-support interactions when using supported metal nanoparticles. This study focuses on CO2 hydrogenation over supported Cu nanoparticles, revealing a 3-fold increase in methanol yield when replacing oxygen anions with hydrides in the perovskite support (Cu/BaTiO2.8 H0.2 yields ~146 mg/h/gCu vs. Cu/BaTiO3 yields ~50 mg/h/gCu). The contrast suggests that significant roles are played by the support hydrides in the reaction. Temperature programmed reaction and isotopic labelling studies indicate that BaTiO2.8 H0.2 surface hydride species follow a Mars van Krevelen mechanism in CO2 hydrogenation, promoting methanol production. High-pressure steady-state isotopic transient kinetic analysis (SSITKA) studies suggest that Cu/BaTiO2.8 H0.2 possesses both a higher density and more active and selective sites for methanol production compared to Cu/BaTiO3 . An operando high-pressure diffuse reflectance infrared spectroscopy (DRIFTS)-SSITKA study shows that formate species are the major surface intermediates over both catalysts, and the subsequent hydrogenation steps of formate are likely rate-limiting. However, the catalytic reactivity of Cu/BaTiO2.8 H0.2 towards the formate species is much higher than Cu/BaTiO3 , likely due to the altered electronic structure of interface Cu sites by the hydrides in the support as validated by density functional theory (DFT) calculations.

Neutron Scattering Studies of Heterogeneous Catalysis.

Understanding the structural dynamics/evolution of catalysts and the related surface chemistry is essential for establishing structure-catalysis relationships, where spectroscopic and scattering tools play a crucial role. Among many such tools, neutron scattering, though less-known, has a unique power for investigating catalytic phenomena. Since neutrons interact with the nuclei of matter, the neutron-nucleon interaction provides unique information on light elements (mainly hydrogen), neighboring elements, and isotopes, which are complementary to X-ray and photon-based techniques. Neutron vibrational spectroscopy has been the most utilized neutron scattering approach for heterogeneous catalysis research by providing chemical information on surface/bulk species (mostly H-containing) and reaction chemistry. Neutron diffraction and quasielastic neutron scattering can also supply important information on catalyst structures and dynamics of surface species. Other neutron approaches, such as small angle neutron scattering and neutron imaging, have been much less used but still give distinctive catalytic information. This review provides a comprehensive overview of recent advances in neutron scattering investigations of heterogeneous catalysis, focusing on surface adsorbates, reaction mechanisms, and catalyst structural changes revealed by neutron spectroscopy, diffraction, quasielastic neutron scattering, and other neutron techniques. Perspectives are also provided on the challenges and future opportunities in neutron scattering studies of heterogeneous catalysis.

Adsorbate-Induced Strong Metal-Support Interactions: Implications for Catalyst Design.

Since the discovery of strong metal-support interactions (SMSIs) over supported metal catalysts in the 1970s, researchers have studied ways to harness this type of catalyst reconstruction to achieve enhanced stability of metal particles against sintering and to create catalytic sites with novel electronic and bonding properties. The motivation to elucidate performance-structure relationships in catalytic transformations has led researchers to take a closer look into catalytic surfaces under reaction conditions rather than a postreaction analysis. These investigations of operating catalysts have made it clear that SMSIs are more common than initially thought. Recent reports show how various adsorbed species, rather than traditional H2/O2 treatment, can promote SMSI in various catalytic systems, a phenomenon named adsorbate-induced SMSI (A-SMSI). Researching the occurrence of A-SMSI has allowed fundamental understanding of catalyst stability, catalytic rates, and product selectivity. The present Perspective discusses the state-of-the-art regarding A-SMSI, the current challenges, and the opportunities ahead in heterogeneous catalysis.

Ultrasonication-Induced Strong Metal-Support Interaction Construction in Water Towards Enhanced Catalysis.

The development of facile methodologies to afford robust supported metal nanocatalysts under mild conditions is highly desirable yet challenging, particularly via strong metal-support interactions (SMSI) construction. State-of-the-art approaches capable of generating SMSI encapsulation mainly focus on high temperature annealing in reductive/oxidative atmosphere. Herein, ultra-stable metal nanocatalysts based on SMSI construction were produced by leveraging the instantaneous high-energy input from ultrasonication under ambient conditions in H2 O, which could rapidly afford abundant active intermediates, Ti3+ ions, and oxygen vacancies within the scaffolds to induce the SMSI overlayer formation. The encapsulation degree could be tuned and controlled via the reducibility of the solvents and the ultrasonication parameters. This facile and efficient approach could be further extended to diverse metal oxide supports and noble metal NPs leading to enhanced performance in hydrogenation reactions and CO2 conversion.

Boosting the Activity of Pd Single Atoms by Tuning Their Local Environment on Ceria for Methane Combustion.

Supported Pd single atom catalysts (SACs) have triggered great research interest in methane combustion yet with contradicting views on their activity and stability. Here, we show that the Pd SAs can take different electronic structure and atomic geometry on ceria support, resulting in different catalytic properties. By a simple thermal pretreatment to ceria prior to Pd deposition, a unique anchoring site is created. The Pd SA, taking this site, can be activated to Pdδ+ (0<δ<2) that has greatly enhanced activity for methane oxidation: T50 lowered by up to 130 °C and almost 10 times higher turnover frequency compared to the untreated catalyst. The enhanced activity of Pdδ+ site is related to its oxygen-deficient local structure and elongated interacting distance with ceria, leading to enhanced capability in delivering reactive oxygen species and decomposing reaction intermediates. This work provides insights into designing highly efficient Pd SACs for oxidation reactions.

Measuring and directing charge transfer in heterogenous catalysts.

Precise control of charge transfer between catalyst nanoparticles and supports presents a unique opportunity to enhance the stability, activity, and selectivity of heterogeneous catalysts. While charge transfer is tunable using the atomic structure and chemistry of the catalyst-support interface, direct experimental evidence is missing for three-dimensional catalyst nanoparticles, primarily due to the lack of a high-resolution method that can probe and correlate both the charge distribution and atomic structure of catalyst/support interfaces in these structures. We demonstrate a robust scanning transmission electron microscopy (STEM) method that simultaneously visualizes the atomic-scale structure and sub-nanometer-scale charge distribution in heterogeneous catalysts using a model Au-catalyst/SrTiO3-support system. Using this method, we further reveal the atomic-scale mechanisms responsible for the highly active perimeter sites and demonstrate that the charge transfer behavior can be readily controlled using post-synthesis treatments. This methodology provides a blueprint for better understanding the role of charge transfer in catalyst stability and performance and facilitates the future development of highly active advanced catalysts.

Ultrasound-mediated synthesis of nanoporous fluorite-structured high-entropy oxides toward noble metal stabilization.

High-entropy oxides (HEOs) are an emerging class of advanced ceramic materials capable of stabilizing ultrasmall nanoparticle catalysts. However, their fabrication still relies on high-temperature thermal treatment methodologies affording nonporous architectures. Herein, we report a facile synthesis of single-phase, fluorite-structured HEO nanocrystals via an ultrasound-mediated co-precipitation strategy under ambient conditions. Within 15 min of ultrasound exposure, high-quality fluorite-structured HEO (CeHfZrSnErOx) was generated as ultrasmall-sized particles with high surface area and high oxygen vacancy concentration. Taking advantage of these unique structural features, palladium was introduced and stabilized in the form of highly dispersed Pd nanoclusters within the CeHfZrSnErOx architecture. Neither phase segregation of the CeHfZrSnErOx support nor Pd sintering was observed under thermal treatment up to 900°C. The as-afforded Pd/CeHfZrSnErOx catalyst exhibits good catalytic performance toward CO oxidation, outperforming Pd/CeO2 of the same Pd loading, which highlights the inherent advantage of CeHfZrSnErOx as carrier support over traditional oxides.

Manipulating Copper Dispersion on Ceria for Enhanced Catalysis: A Nanocrystal-Based Atom-Trapping Strategy.

Due to tunable redox properties and cost-effectiveness, copper-ceria (Cu-CeO2 ) materials have been investigated for a wide scope of catalytic reactions. However, accurately identifying and rationally tuning the local structures in Cu-CeO2 have remained challenging, especially for nanomaterials with inherent structural complexities involving surfaces, interfaces, and defects. Here, a nanocrystal-based atom-trapping strategy to access atomically precise Cu-CeO2 nanostructures for enhanced catalysis is reported. Driven by the interfacial interactions between the presynthesized Cu and CeO2 nanocrystals, Cu atoms migrate and redisperse onto the CeO2 surface via a solid-solid route. This interfacial restructuring behavior facilitates tuning of the copper dispersion and the associated creation of surface oxygen defects on CeO2 , which gives rise to enhanced activities and stabilities catalyzing water-gas shift reaction. Combining soft and solid-state chemistry of colloidal nanocrystals provide a well-defined platform to understand, elucidate, and harness metal-support interactions. The dynamic behavior of the supported metal species can be further exploited to realize exquisite control and rational design of multicomponent nanocatalysts.

Machine Learning Method Reveals Hidden Strong Metal-Support Interaction in Microscopy Datasets.

Forming an ultra-thin, permeable encapsulation oxide-support layer on a metal catalyst surface is considered an effective strategy for achieving a balance between high stability and high activity in heterogenous catalysts. The success of such a design relies not only on the thickness, ideally one to two atomic layers thick, but also on the morphology and chemistry of the encapsulation layer. Reliably identifying the presence and chemical nature of such a trace layer has been challenging. Electron energy-loss spectroscopy (EELS) performed in a scanning transmission electron microscope (STEM), the primary technique utilized for such studies, is limited by a weak signal on overlayers when using conventional analysis methods, often leading to misinterpreted or missed information. Here, a robust, unsupervised machine learning data analysis method is developed to reveal trace encapsulation layers that are otherwise overlooked in STEM-EELS datasets. This method provides a reliable tool for analyzing encapsulation of catalysts and is generally applicable to any spectroscopic analysis of materials and devices where revealing a trace signal and its spatial distribution is challenging.

AMPK mediates regulation of glomerular volume and podocyte survival.

Herein, we report that Shroom3 knockdown, via Fyn inhibition, induced albuminuria with foot process effacement (FPE) without focal segmental glomerulosclerosis (FSGS) or podocytopenia. Interestingly, knockdown mice had reduced podocyte volumes. Human minimal change disease (MCD), where podocyte Fyn inactivation was reported, also showed lower glomerular volumes than FSGS. We hypothesized that lower glomerular volume prevented the progression to podocytopenia. To test this hypothesis, we utilized unilateral and 5/6th nephrectomy models in Shroom3-KD mice. Knockdown mice exhibited less glomerular and podocyte hypertrophy after nephrectomy. FYN-knockdown podocytes had similar reductions in podocyte volume, implying that Fyn was downstream of Shroom3. Using SHROOM3 or FYN knockdown, we confirmed reduced podocyte protein content, along with significantly increased phosphorylated AMPK, a negative regulator of anabolism. AMPK activation resulted from increased cytoplasmic redistribution of LKB1 in podocytes. Inhibition of AMPK abolished the reduction in glomerular volume and induced podocytopenia in mice with FPE, suggesting a protective role for AMPK activation. In agreement with this, treatment of glomerular injury models with AMPK activators restricted glomerular volume, podocytopenia, and progression to FSGS. Glomerular transcriptomes from MCD biopsies also showed significant enrichment of Fyn inactivation and Ampk activation versus FSGS glomeruli. In summary, we demonstrated the important role of AMPK in glomerular volume regulation and podocyte survival. Our data suggest that AMPK activation adaptively regulates glomerular volume to prevent podocytopenia in the context of podocyte injury.

Photoinduced Strong Metal-Support Interaction for Enhanced Catalysis.

Strong metal-support interaction (SMSI) construction is a pivotal strategy to afford thermally robust nanocatalysts in industrial catalysis, but thermally induced reactions (>300 °C) in specific gaseous atmospheres are generally required in traditional procedures. In this work, a photochemistry-driven methodology was demonstrated for SMSI construction under ambient conditions. Encapsulation of Pd nanoparticles with a TiOx overlayer, the presence of Ti3+ species, and suppression of CO adsorption were achieved upon UV irradiation. The key lies in the generation of separated photoinduced reductive electrons (e-) and oxidative holes (h+), which subsequently trigger the formation of Ti3+ species/oxygen vacancies (Ov) and then interfacial Pd-Ov-Ti3+ sites, affording a Pd/TiO2 SMSI with enhanced catalytic hydrogenation efficiency. The as-constructed SMSI layer was reversible, and the photodriven procedure could be extended to Pd/ZnO and Pt/TiO2.

Genome-wide non-HLA donor-recipient genetic differences influence renal allograft survival via early allograft fibrosis.

Donor-recipient (D-R) differences at human leukocyte antigen (HLA) loci are currently incorporated into organ sharing, allocation and immunosuppression decisions. However, while acute rejection episodes have substantially diminished, progressive histologic damage occurs in allografts and improved long-term survival remains an unrealized goal among kidney recipients. Here we tested the hypothesis that non-HLA dependent, genome-wide D-R genetic differences could contribute to unchecked alloimmunity with histologic and functional consequences, culminating in long-term allograft failure. Genome-wide single nucleotide polymorphism (SNP) array data, excluding the HLA region, was utilized from 385 transplants to study the role of D-R differences upon serial histology and allograft survival. ADMIXTURE analysis was performed to quantitatively estimate ancestry in each D-R pair and PLINK was used to estimate the proportion of genome-shared identity-by-descent (pIBD) between D-R pairs. Subsequently, quantitative measures of recipient ancestry based on non-HLA SNPs was associated with death-censored allograft survival in adjusted Cox models. In D-R pairs of similar ancestry, pIBD was significantly associated with allograft survival independent of HLA mismatches in 224 transplants. Surprisingly, pIBD and recipient ancestry were not associated with clinical or subclinical rejection at any time post-transplant. Significantly, in multivariable analysis, pIBD inversely correlated with vascular intimal fibrosis in 160 biopsies obtained less than one year which in turn was significantly associated with allograft survival. Thus, our novel data show that non-HLA D-R differences associate with early vascular intimal fibrosis and allograft survival.

Elucidation of the Reaction Mechanism for High-Temperature Water Gas Shift over an Industrial-Type Copper-Chromium-Iron Oxide Catalyst.

The water gas shift (WGS) reaction is of paramount importance for the chemical industry, as it constitutes, coupled with methane reforming, the main industrial route to produce hydrogen. Copper-chromium-iron oxide-based catalysts have been widely used for the high-temperature WGS reaction industrially. The WGS reaction mechanism by the CuCrFeO x catalyst has been debated for years, mainly between a "redox" mechanism involving the participation of atomic oxygen from the catalyst and an "associative" mechanism proceeding via a surface formate-like intermediate. In the present work, advanced in situ characterization techniques (infrared spectroscopy, temperature-programmed surface reaction (TPSR), near-ambient pressure XPS (NAP-XPS), and inelastic neutron scattering (INS)) were applied to determine the nature of the catalyst surface and identify surface intermediate species under WGS reaction conditions. The surface of the CuCrFeO x catalyst is found to be dynamic and becomes partially reduced under WGS reaction conditions, forming metallic Cu nanoparticles on Fe3O4. Neither in situ IR not INS spectroscopy detect the presence of surface formate species during WGS. TPSR experiments demonstrate that the evolution of CO2 and H2 from the CO/H2O reactants follows different kinetics than the evolution of CO2 and H2 from HCOOH decomposition (molecule mimicking the associative mechanism). Steady-state isotopic transient kinetic analysis (SSITKA) (CO + H216O → CO + H218O) exhibited significant 16O/18O scrambling, characteristic of a redox mechanism. Computed activation energies for elementary steps for the redox and associative mechanism by density functional theory (DFT) simulations indicate that the redox mechanism is favored over the associative mechanism. The combined spectroscopic, computational, and kinetic evidence in the present study finally resolves the WGS reaction mechanism on the industrial-type high-temperature CuCrFeO x catalyst that is shown to proceed via the redox mechanism.

Neutron Scattering Investigations of Hydride Species in Heterogeneous Catalysis.

In heterogeneous catalysis, hydrides on the surface or in the bulk play a critical role as either active components or reaction intermediates in many hydrogen-involving reactions, but characterization of the nature and structure of these hydride species remains challenging. Neutron scattering, which is extremely sensitive to light elements, such as hydrogen, has shown great potential in meeting this challenge. In this Minireview, recent advances in neutron studies of hydride species, mainly over the two most typical classes of catalysts-metals and oxides-are surveyed. Findings on catalysts outside these categories are raised if they are considered to be relevant for contextualization in the present Minireview. The adsorption, dissociation, spillover, and reactivity of hydrogen, especially hydride species over supported metal and oxide catalysts, have been successfully investigated, mostly by means of neutron vibrational spectroscopy. Insights from these neutron studies, which are otherwise not possible with other techniques, shed light on the interaction mechanism of hydrogen with solid surfaces and reaction mechanisms in which hydrogen is involved. Future research challenges on neutron scattering studies of hydrides, as well as catalysis in general, are also highlighted, and more operando-type neutron studies need be conducted to advance the field.

SHROOM3-FYN Interaction Regulates Nephrin Phosphorylation and Affects Albuminuria in Allografts.

BACKGROUND: We previously showed that the presence of a CKD-associated locus in SHROOM3 in a donor kidney results in increased expression of SHROOM3 (an F-actin-binding protein important for epithelial morphogenesis, via rho-kinase [ROCK] binding); this facilitates TGF-b signaling and allograft fibrosis. However, other evidence suggests Shroom3 may have a protective role in glomerular development. METHODS: We used human data, Shroom3 knockdown podocytes, and inducible shRNA-mediated knockdown mice to study the role of Shroom3 in adult glomeruli. RESULTS: Expression data from the Nephroseq database showed glomerular and nonglomerular SHROOM3 had opposing associations with renal function in CKD biopsy samples. In human allografts, homozygosity at rs17319721, the SHROOM3 locus linked with lower GFR, was associated with reduced albuminuria by 2 years after transplant. Although our previous data showed reduced renal fibrosis with tubular Shroom3 knockdown, this study found that glomerular but not tubular Shroom3 knockdown induced albuminuria. Electron microscopy revealed diffuse foot process effacement, and glomerular RNA-sequencing showed enrichment of tyrosine kinase signaling and podocyte actin cytoskeleton pathways in knockdown mice. Screening SHROOM3-interacting proteins identified FYN (a src-kinase) as a candidate.We confirmed the interaction of endogenous SHROOM3 with FYN in human podocytes via a critical Src homology 3-binding domain, distinct from its ROCK-binding domain. Shroom3-Fyn interaction was required in vitro and in vivo for activation of Fyn kinase and downstream nephrin phosphorylation in podocytes. SHROOM3 knockdown altered podocyte morphology, cytoskeleton, adhesion, and migration. CONCLUSIONS: We demonstrate a novel mechanism that may explain SHROOM3's dichotomous associations in glomerular versus nonglomerular compartments in CKD.

Pre-liver transplant renal dysfunction and association with post-transplant end-stage renal disease: A single-center examination of updated UNOS recommendations.

Simultaneous liver-kidney allocation protocols allocate dual organs based on a sustained eGFR of 30 mL/min or less. A 2017-UNOS update includes CKD3 as dual organ candidates but only when the listing eGFR is <30 mL/min while recommending a "safety net" for prioritized kidney listing post-LT. We retrospectively reviewed adult LTs examine whether the UNOS proposal captured the LT population at highest risk for developing post-LT ESRD. Among 290 LT recipients, 67 had pre-LT CKD3, 141 had AKI, of whom 47 required dialysis (<4 weeks). During follow-up, 25 (8.62%) developed ESRD, while 70 (24.1%) died. In adjusted Cox models, CKD3 had an independent association with post-LT ESRD (adjusted HR 4.8; P = 0.001), independent of AKI. Interestingly, CKD3 with listing GFR >30 mL/min was still significantly associated with post-LT ESRD. AKI was associated with reduced post-LT survival (adjusted HR 1.9; P = 0.02), albeit only in the first-year post-LT. Severe AKI-D was associated with post-LT ESRD and mortality. The safety net would have captured only 60% of all post-LT ESRD cases in our cohort. Pre-LT CKD3 was associated with increased risk of post-LT ESRD above the recommended cutoff for listing GFR. These findings, if generalizable in larger cohorts have important implications for dual organ allocation.

Controlling Reaction Selectivity through the Surface Termination of Perovskite Catalysts.

Although perovskites have been widely used in catalysis, tuning of their surface termination to control reaction selectivity has not been well established. In this study, we employed multiple surface-sensitive techniques to characterize the surface termination (one aspect of surface reconstruction) of SrTiO3 (STO) after thermal pretreatment (Sr enrichment) and chemical etching (Ti enrichment). We show, by using the conversion of 2-propanol as a probe reaction, that the surface termination of STO can be controlled to greatly tune catalytic acid/base properties and consequently the reaction selectivity over a wide range, which is not possible with single-metal oxides, either SrO or TiO2 . Density functional theory (DFT) calculations explain well the selectivity tuning and reaction mechanism on STO with different surface termination. Similar catalytic tunability was also observed on BaZrO3 , thus highlighting the generality of the findings of this study.