Hunting Dynamics and Identification of Potentially Pathogenic Bacteria in European Fallow Deer (Dama dama) across Three Hunting Reserves in Western Romania.

The study focused on the hunting practices and potentially pathogenic bacterial species among European fallow deer (Dama dama). Within a five-year period, three hunting grounds from Western Romania were examined. During this period, a total of 1881 deer were hunted, and 240 samples were collected by rectal and nasal swabbing from 120 carcasses. Bacterial strains were identified utilizing bacteriological assays and the Vitek® 2 Compact system. Notably, the Socodor hunting ground exhibited a significant difference in harvesting quotas between the bucks (Group M) and does/yearlings (Group F), favoring the latter. In the Chișineu Criș-Salișteanca hunting ground, a likely correlation in harvesting quotas between the two groups was observed. The identified potentially pathogenic bacteria were Escherichia coli, Salmonella spp., Staphylococcus aureus, Listeria monocytogenes and Enterococcus faecium. These results highlight the importance of effectively managing the deer population and recognize the potential for Dama dama to spread zoonotic pathogens, emphasizing the necessity of adopting a One Health approach and maintaining ongoing surveillance of this game species' population dynamics.

Case report: Double adjacent ventral slot in two medium-sized breed dogs.

Two medium-sized, 7-year-old dogs, with no previous history of pain, presented with acute neurologic symptoms consistent with intervertebral disk disease. Both cases had CT, where cervical pathology was identified. In one dog, the diagnosis was singular extensive cervical disk herniation with possible epidural hemorrhage and in the other, the diagnosis was multiple-site cervical disk herniation. The first dog, a Shar-Pei, underwent treatment with two standard adjacent ventral slots between the C4-C5 and C5-C6 intervertebral disk spaces and a fenestration between the C3 and C4 intervertebral disk spaces. The second case, a beagle, underwent a double adjacent standard ventral slot between the C5-C6 and C6-C7 intervertebral disk spaces. Both dogs recovered uneventfully after the surgery and showed no signs of recurrence during a 2-year follow-up period. This is the first detailed report of the use of a double adjacent ventral slot as a treatment for spinal decompression in medium-sized dogs with multiple-site spinal cord compression.

The Role of Oxidative Stress in Infertility.

(1) Background: Oxidative stress markers in the follicular fluid and serum of the patient with IVF results (number of fertilized oocytes, number of embryos, cumulative pregnancy rate) are important in establishing the causes of infertility. (2) Methods: 42 patients were enrolled in the study over the duration of 24 months and were divided into two groups: the study group divided into the female etiology for infertility as a tubal factor, diminished ovarian reserve, endometriosis, and unexplained infertility, and the control group consisting of the male factor, excluding the sperm donors and with no female factor cause. On the day of ovarian puncture in IVF, follicular fluid and serum were collected from the patients. (3) Results: Malondialdehyde from the follicular fluid was higher in the control group. The total antioxidant capacity in the follicular fluid is positively correlated with the pregnancy rate. There is no statistically significant difference in the oxidative stress markers from serum in both groups. (4) Conclusions: The capacity of the follicular fluid environment to contain the reactive oxygen species (ROS) leads to a higher pregnancy rate in the control group.

Sustainable Fully Printed UV Sensors on Cork Using Zinc Oxide/Ethylcellulose Inks.

Low-cost and large-scale production techniques for flexible electronics have evolved greatly in recent years, having great impact in applications such as wearable technology and the internet of things. In this work, we demonstrate fully screen-printed UV photodetectors, successfully fabricated at a low temperature on a cork substrate, using as the active layer a mixture of zinc oxide nanoparticles and ethylcellulose. The photoresponse under irradiation with a UV lamp with peak emission at 302 nm exhibited a quasi-quadratic behavior directly proportional to the applied voltage, with a photocurrent of about 5.5 and 20 µA when applying 1.5 V and 5 V, respectively. The dark current stayed below 150 nA, while the rise and falling times were, respectively, below 5 and 2 s for both applied voltages. The performance was stable over continuous operation and showed a degradation of only 9% after 100 bending cycles in a 45 mm radius test cylinder. These are promising results regarding the use of this type of sensor in wearable applications such as cork hats, bracelets, or bags.

Paper as Active Layer in Inkjet-Printed Capacitive Humidity Sensors.

An inkjet-printed relative humidity sensor based on capacitive changes which responds to different humidity levels in the environment is presented in this work. The inkjet-printed silver interdigitated electrodes configuration on the paper substrate allowed for the fabrication of a functional proof-of-concept of the relative humidity sensor, by using the paper itself as a sensing material. The sensor sensitivity in terms of relative humidity changes was calculated to be around 2 pF/RH %. The response time against different temperature steps from 3 to 85 °C was fairly constant (about 4-5 min), and it was considered fast for the aimed application, a smart label.

A Novel Centrifugation Method Using a Cell Salvage Device Offers an Alternative to the Use of Leukocyte-Depleting Filters for Autologous Blood Transfusions.

Autotransfusion protocols often use the use of costly filters, such as leukocyte-depleting filters (LDFs), to minimize reinfusion of activated leukocytes and inflammatory mediators associated with reperfusion injury (RI). LDFs are used extensively in hospital settings; however, they represent an additional capital expenditure for hospitals, as well as a constraint on the reinfusion rate of blood products for health-care providers. We compared a commonly used LDF to a novel centrifugation method employing a widely used cell salvage device. Complete blood counts and enzyme-linked immunosorbent assays (ELISAs) measuring tumor necrosis factor-α (TNF-α) and interleukin-2 (IL-2) were performed to compare the efficacy of these methodologies. The LDF removed, on average, 94% of all leukocytes, including 96% of neutrophils. The centrifugation method removed, on average, 89% of all leukocytes, including 91% of neutrophils and resulted in a highly concentrated red blood cell product. Our results suggest both methods offer equivalent leukocyte reduction. TNF-α was also comparably reduced following our novel centrifugation method and the LDF method and IL-2 levels were undetectable in all samples. These results indicate our novel centrifugation method may preclude the need for a LDF during select autotransfusion applications.

Inkjet printed silver electrodes on macroporous paper for a paper-based isoelectric focusing device.

We demonstrate a combined printing process utilizing inkjet printing of silver electrodes and solid-ink technology for printing hydrophobic wax barriers for fabricating paper microfluidic devices with integrated electrodes. Optimized printing parameters are given for achieving conducting silver lines on the top of macroporous chromatography paper down to 250 µm-300 µm resolution. Electrical characterization and wicking experiments demonstrate that the printed silver patterns are simultaneously conductive and porous enough to allow reliable capillary wicking across the electrodes. The combined wax and silver printing method is used for fabrication of paper microfluidic isoelectric focusing devices for separation and concentration of proteins.

Non-Lithographic Silicon Micromachining Using Inkjet and Chemical Etching.

We introduce a non-lithographical and vacuum-free method to pattern silicon. The method combines inkjet printing and metal assisted chemical etching (MaCE); we call this method "INKMAC". A commercial silver ink is printed on top of a silicon surface to create the catalytic patterns for MaCE. The MaCE process leaves behind a set of silicon nanowires in the shape of the inkjet printed micrometer scale pattern. We further show how a potassium hydroxide (KOH) wet etching process can be used to rapidly etch away the nanowires, producing fully opened cavities and channels in the shape of the original printed pattern. We show how the printed lines (width 50⁻100 µm) can be etched into functional silicon microfluidic channels with different depths (10⁻40 µm) with aspect ratios close to one. We also used individual droplets (minimum diameter 30 µm) to produce cavities with a depth of 60 µm and an aspect ratio of two. Further, we discuss using the structured silicon substrate as a template for polymer replication to produce superhydrophobic surfaces.