Metal halide perovskite layers studied by scanning transmission X-ray microscopy.

We describe the investigation of metal halide perovskite layers, particularly CH3NH3PbI3 used in photovoltaic applications, by soft X-ray scanning transmission X-ray microscopy (STXM). Relevant reference spectra were used to fit the experimental data using singular value decomposition. The distribution of key elements Pb, I, and O was determined throughout the layer stack of two samples prepared by wet process. One sample was chosen to undergo electrical biasing. Spectral data shows the ability of STXM to provide relevant chemical information for these samples. We found the results to be in good agreement with the sample history, both regarding the deposition sequence and the degradation of the perovskite material.

Tuning the Charge Transfer in λ5-Phosphinines with Amino Substituents.

We report the substitution of λ5-phosphinines (2,6-dicarbonitrile diphenyl-1-λ5-phosphinine) with an amino group. The impact of these modifications on both the optical and redox properties is investigated using a joint experimental/theoretical approach. In particular, we show that the choice of the donor diphenylamino group dramatically impacts the nature of the charge transfer. The use of di(methoxyphenyl)amine redshifts the optical properties and allows thermally activated delayed fluorescence in the solid state. Finally, we demonstrated that λ5-phosphinines with an amino group can be used as active emitters in an electroluminescent device.

Soft X-ray characterization of halide perovskite film by scanning transmission X-ray microscopy.

Organic-inorganic metal halide perovskites (MHPs) have recently been receiving a lot of attention due to their newfound application in optoelectronic devices, including perovskite solar cells (PSCs) which have reached power conversion efficiencies as high as 25.5%. However, the fundamental mechanisms in PSCs, including the correlation of degradation with the excellent optoelectrical properties of the perovskite absorbers, are poorly understood. In this paper, we have explored synchrotron-based soft X-ray characterization as an effective technique for the compositional analysis of MHP thin films. Most synchrotron-based studies used for investigating MHPs so far are based on hard X-rays (5-10 keV) which include various absorption edges (Pb L-edge, I L-edge, Br K-edge, etc.) but are not suited for the analysis of the organic component in these materials. In order to be sensitive to a maximum number of elements, we have employed soft X-ray-based scanning transmission X-ray microscopy (STXM) as a spectro-microscopy technique for the characterization of MHPs. We examined its sensitivity to iodine and organic components, aging, or oxidation by-products in MHPs to make sure that our suggested method is suitable for studying MHPs. Furthermore, methylammonium triiodide with different deposition ratios of PbI2 and CH3NH3I (MAI), and different thicknesses, were characterized for chemical inhomogeneity at the nanoscale by STXM. Through these measurements, we demonstrate that STXM is very sensitive to chemical composition and homogeneity in MHPs. Thus, we highlight the utility of STXM for an in-depth analysis of physical and chemical phenomena in PSCs.

Si-containing polycyclic aromatic hydrocarbons: synthesis and opto-electronic properties.

We report a straightforward synthesis of Si-containing Polycyclic Aromatic Hydrocarbons (PAHs). The impact of π-extension and exocyclic modifications on both the optical and redox properties is investigated using a joint experimental/theoretical approach. By taking advantage of the solid-state luminescence of these derivatives, electroluminescent devices are prepared. Such preliminary opto-electronic results highlight that these heteroatom-containing PAHs are promising building blocks for organic electronics.

Synthesis, Electronic Properties and OLED Devices of Chromophores Based on λ5 -Phosphinines.

A new series of 2,4,6-triaryl-λ5 -phosphinines have been synthesized that contain different substituents both on the carbon backbone and the phosphorus atom of the six-membered heterocycle. Their optical and redox properties were studied in detail, supported by in-depth theoretical calculations. The modularity of the synthetic strategy allowed the establishment of structure-property relationships for this class of compounds and an OLED based on a blue phosphinine emitter could be developed for the first time.

Naphthyl-Fused Phosphepines: Luminescent Contorted Polycyclic P-Heterocycles.

This article presents the synthesis of a new family of naphthyl-fused phosphepines through Ni-mediated C-C coupling. Interestingly, the chlorophosphine oxide intermediate shows strong resistance toward oxidation/hydrolysis owing to a combination of steric hindrance and pnictogen interactions. However, it can undergo substitution reactions under specific conditions. The optical/redox properties and the electronic structure of these new π-systems were studied experimentally (UV/Vis absorption, emission, cyclic voltammetry) and computationally (TD-DFT calculations, NICS investigation). Taking advantage of the luminescence of these derivatives, a blue-emitting OLED has been prepared, highlighting that these novel π-conjugated P-heterocycles appear to be promising building blocks for solid-state lighting applications.

Phosphahelicenes: From Chiroptical and Photophysical Properties to OLED Applications.

Herein, the experimental physicochemical and chiroptical properties of a series of phosphahelicenes are reported, focusing on their UV/Vis absorption, luminescence, electronic circular dichroism, optical rotations, and circularly polarized luminescence. Furthermore, detailed analysis of absorption and ECD spectra performed with the help of quantum-chemical calculations allowed us to highlight general features of these helicenic phosphines. Finally, due to well-suited electrochemical properties and thermal stability, the systems were successfully used as emitters in organic light-emitting diodes.

Low Temperature Solution-Processable 3D-Patterned Charge Recombination Layer for Organic Tandem Solar Cells.

We propose a novel method to pattern the charge recombination layer (CRL) with a low-temperature solution-processable ZnO layer (under 150 °C) for organic solar cell applications. Due to the optimal drying process and thermal annealing condition, ZnO sol-gel particles formed a three-Dimensional (3D) structure without using a high temperature or ramping method. The generated 3D nano-ripple pattern showed a height of around 120 nm, and a valley-to-valley distance of about 500 nm. Based on this newly developed ZnO nano-ripple patterning technique, it was possible to pattern the CRL without damaging the underneath layers in tandem structure. The use of nano-ripple patterned ZnO as the part of CRL, led to the concomitant improvement of the power conversion efficiency (PCE) of about 30%, compared with non-patterned CRL device.

Structural Instabilities Related to Highly Anharmonic Phonons in Halide Perovskites.

Hybrid perovskites have emerged over the past five years as absorber layers for novel high-efficiency low-cost solar cells combining the advantages of organic and inorganic semiconductors. Unfortunately, electrical transport in these materials is still poorly understood. Employing the linear response approach of density functional theory, we reveal strong anharmonic effects and a double-well phonon instability at the center of the Brillouin zone for both cubic and orthorhombic phases of inorganic CsPbI3. Previously reported soft phonon modes are stabilized at the actual lower-symmetry equilibrium structure, which occurs in a very flat energy landscape, highlighting the strong competition between the different phases of CsPbI3. Factoring these low-energy phonons into electron-phonon interactions and band gap calculations could help better understand the electrical transport properties in these materials. Furthermore, the perovskite oscillations through the corresponding energy barrier could explain the underlying ferroelectricity and the dynamical Rashba effect predicted in halide perovskites for photovoltaics.

Spirobifluorene Regioisomerism: A Structure-Property Relationship Study.

The present works report the first structure-property relationship study of a key class of organic semiconductors, that is, the four spirobifluorene positional isomers possessing a para-, meta- or ortho-linkage. The remarkable and surprising impact of the ring bridging and of the linkages on the electronic properties of the regioisomers has been particularly highlighted and rationalised. The impact of the ring bridging on the photophysical properties has been stressed with notably the different influence of the linkages and the bridge on the singlet and triplet excited states. The first member of a new family of spirobifluorenes substituted in the 1-position, which presents better performance in blue phosphorescent OLEDs than those of its regioisomers, is reported. These features highlight not only the great potential of 1-substituted spirobifluorenes, but also the remarkable impact of regioisomerism on electronic properties.

Electron-Rich 4-Substituted Spirobifluorenes: Toward a New Family of High Triplet Energy Host Materials for High-Efficiency Green and Sky Blue Phosphorescent OLEDs.

We report herein a detailed structure-properties relationship study of the first examples of electron-rich 4-substituted spirobifluorenes for organic electronic applications, namely, 4-phenyl-N-carbazole-spirobifluorene (4-PhCz-SBF) and 4-(3,4,5-trimethoxyphenyl)-spirobifluorene (4-Ph(OMe)3-SBF). The incorporation of the electron-rich moieties in the ortho position of the biphenyl linkage (position C4) induces unique properties, very different from those previously described in the literature for this family of semiconductors. Both dyes can be readily synthesized, possess high triplet energies and excellent thermal stability, and their HOMO energy levels are highly increased compared to those of other 4-substituted SBFs. We also provide in this work the first rationalization of the peculiar fluorescence of 4-substituted SBFs. Finally, the present dyes have been successfully incorporated as host in green and blue phosphorescent organic light-emitting diodes with high performance either for the green (EQE of 20.2%) or the blue color (EQE of 9.6%). These performances are, to the best of our knowledge, among the highest reported to date for 4-substituted SBF derivatives.

9H-Quinolino[3,2,1-k]phenothiazine: A New Electron-Rich Fragment for Organic Electronics.

A new electron-rich fragment, namely the quinolinophenothiazine (QPTZ) is reported. The QPTZ fragment incorporated in spiroconfigured materials leads to higher performance in blue Phosphorescent OLEDs than structurally related phenylacridine and indoloacridine based materials (increasing the HOMO energy level, modulating the spin-orbit coupling, etc.) and leads to highly efficient blue phosphorescent organic light emitting diodes, indicating the strong potential of this new molecular fragment in organic electronics.

Using Low Temperature Photoluminescence Spectroscopy to Investigate CH3NH3PbI3 Hybrid Perovskite Degradation.

Investigating the stability and evaluating the quality of the CH3NH3PbI3 perovskite structures is quite critical both to the design and fabrication of high-performance perovskite devices and to fundamental studies of the photophysics of the excitons. In particular, it is known that, under ambient conditions, CH3NH3PbI3 degrades producing some PbI2. We show here that low temperature Photoluminescence (PL) spectroscopy is a powerful tool to detect PbI2 traces in hybrid perovskite layers and single crystals. Because PL spectroscopy is a signal detection method on a black background, small PbI2 traces can be detected, when other methods currently used at room temperature fail. Our study highlights the extremely high stability of the single crystals compared to the thin layers and defects and grain boundaries are thought to play an important role in the degradation mechanism.

Modulation of the Physicochemical Properties of Donor-Spiro-Acceptor Derivatives through Donor Unit Planarisation: Phenylacridine versus Indoloacridine-New Hosts for Green and Blue Phosphorescent Organic Light-Emitting Diodes (PhOLEDs).

This work reports a detailed structure-property relationship study of a series of efficient host materials based on the donor-spiro-acceptor (D-spiro-A) design for green and sky-blue phosphorescent organic light-emitting diodes (PhOLEDs). The electronic and physical effects of the indoloacridine (IA) fragment connected through a spiro bridge to different acceptor units, namely, fluorene, dioxothioxanthene or diazafluorene moiety, have been investigated in depth. The resulting host materials have been easily synthesised through short, efficient, low-cost, and highly adaptable synthetic routes by using common intermediates. The dyes possess a very high triplet energy (ET ) and tuneable HOMO/LUMO levels, depending on the strength of the donor/acceptor combination. The peculiar electrochemical and optical properties of the IA moiety have been investigated though a fine comparison with their phenylacridine counterparts to study the influence of planarisation. Finally, these molecules have been incorporated as hosts in green and sky-blue PhOLEDs. For the derivative SIA-TXO2 as a host, external quantum efficiencies as high as 23 and 14 % have been obtained for green and sky-blue PhOLEDs, respectively.

All-Solution-Processed Organic Light-Emitting Diodes Based on Photostable Photo-cross-linkable Fluorescent Small Molecules.

We demonstrate herein the fabrication of small molecule-based OLEDs where four organic layers from the hole- to the electron-transporting layers have successively been deposited by using an all-solution process. The key feature of the device relies on a novel photopolymerizable red-emitting material, made of small fluorophores substituted with two acrylate units, and displaying high-quality film-forming properties as well as high emission quantum yield as nondoped thin films. Insoluble emissive layers were obtained upon UV irradiation using low illumination doses, with no further need of postcuring. Very low photodegradation was noticed, giving rise to bright layers with a remarkable surface quality, characterized by a mean RMS roughness as low as 0.7 nm after development. Comparative experiments between solution-processed OLEDs and vacuum-processed OLEDs made of fluorophores with close architectures show external quantum efficiencies in the same range while displaying distinct behaviors in terms of current and power efficiencies. They validate the proof of concept of nondoped solution-processable emissive layers exclusively made of photopolymerized fluorophores, thereby reducing the amount of components and opening the way toward cost-effective fabrication of solution-processed OLED multilayer architectures.

Design and Synthesis of New Circularly Polarized Thermally Activated Delayed Fluorescence Emitters.

This work describes the first thermally activated delayed fluorescence material enabling circularly polarized light emission through chiral perturbation. These new molecular architectures obtained through a scalable one-pot sequential synthetic procedure at room temperature (83% yield) display high quantum yield (up to 74%) and circularly polarized luminescence with an absolute luminescence dissymmetry factor, |glum|, of 1.3 × 10(-3). These chiral molecules have been used as an emissive dopant in an organic light emitting diode exhibiting external quantum efficiency as high as 9.1%.

Spirobifluorene-2,7-dicarbazole-4'-phosphine Oxide as Host for High-Performance Single-Layer Green Phosphorescent OLED Devices.

A new host material based on the 2,7,4'-substituted spirobifluorene platform has been designed and used in single-layer phosphorescent OLED with very high efficiency (EQE = 13.2%) and low turn-on voltage (2.4 V). This performance is among the best reported for green single-layer PhOLEDs and may open new avenues in the design of host materials for single-layer devices.

Enhancing the Performances of P3HT:PCBM-MoS3-Based H2-Evolving Photocathodes with Interfacial Layers.

Organic semiconductors have great potential for producing hydrogen in a durable and economically viable manner because they rely on readily available materials and can be solution-processed over large areas. With the objective of building efficient hybrid organic-inorganic photoelectrochemical cells, we combined a noble-metal-free and solution-processable catalyst for proton reduction, MoS3, and a poly(3-hexylthiophene):phenyl-C61-butyric acid methyl ester (P3HT:PCBM) bulk heterojunction (BHJ). Different interfacial layers were investigated to improve the charge transfer between P3HT:PCBM and MoS3. Metallic Al/Ti interfacial layers led to an increase of the photocurrent by up to 8 mA cm(-2) at reversible hydrogen electrode (RHE) potential with a 0.6 V anodic shift of the H2 evolution reaction onset potential, a value close to the open-circuit potential of the P3HT:PCBM solar cell. A 50-nm-thick C60 layer also works as an interfacial layer, with a current density reaching 1 mA cm(-2) at the RHE potential. Moreover, two recently highlighted1 figures-of-merit, measuring the ratio of power saved, Φsaved,ideal and Φsaved,NPAC, were evaluated and discussed to compare the performances of various photocathodes assessed in a three-electrode configuration. Φsaved,ideal and Φsaved,NPAC use the RHE and a nonphotoactive electrode with an identical catalyst as the dark electrode, respectively. They provide different information especially for differentiation of the roles of the photogenerating layer and catalyst. The best results were obtained with the Al/Ti metallic interlayer, with Φsaved,ideal and Φsaved,NPAC reaching 0.64% and 2.05%, respectively.

Donor/Acceptor Dihydroindeno[1,2-a]fluorene and Dihydroindeno[2,1-b]fluorene: Towards New Families of Organic Semiconductors.

New families of donor/acceptor semiconductors based on dihydroindeno[1,2-a]fluorene and dihydroindeno[2,1-b]fluorene are reported. Due to the spiro bridges, this new generation of dihydroindenofluorenes allows a spatial separation of HOMO and LUMO, which retains the high ET value of the dihydroindenofluorene backbone and excellent physical properties. This control of the electronic and physical properties has allowed a second generation of dihydroindeno[1,2-a]fluorene to be obtained with strongly enhanced performance in green and sky-blue phosphorescent organic light-emitting diodes (PhOLEDs) relative to the first generation of materials. To date, this is the highest performance ever reported for a blue PhOLED by using a dihydroindenofluorene derivative. Through this structure-property relationship study, a remarkable difference of performance between syn and anti isomers has also been highlighted. This surprising behaviour has been attributed to the different symmetry of the two molecules, and highlights the importance of the geometry profiles in the design of host materials for PhOLEDs.

Synthesis, electronic properties and WOLED devices of planar phosphorus-containing polycyclic aromatic hydrocarbons.

We describe the synthesis and the physical properties of polyaromatic hydrocarbons (PAHs) containing a phosphorus atom at the edge. In particular, the impact of the successive addition of aromatic rings on the electronic properties was investigated by experimental (UV/Vis absorption, fluorescence, cyclic voltammetry) and theoretical studies (DFT). The physical properties recorded in solution and in the solid state showed that the P-containing PAHs exhibit properties expected for an emitter in white organic light-emitting diodes (WOLEDs).