Intrinsically reactive hyperbranched interface governs graphene oxide dispersion and crosslinking in epoxy for enhanced flame retardancy.

Enhancing the flame retardancy of epoxy (EP) resins typically entailed a trade-off with other physical properties. Herein, hyperbranched poly(amidoamine) (HPAA) and phytic acid (PA) were used to functionalize graphene oxide (GO) via electrostatic self-assembly in water to prepare a phosphorus-nitrogen functionalized graphene oxide nanosheet (PN-GOs), which could be utilized as high efficient flame-retardant additive of epoxy resin without sacrificing other properties. The PN-GOs demonstrated improved dispersion and compatibility within the EP matrix, which resulted in significant concurrent enhancements in both the mechanical performance and flame-retardant properties of the PN-GOs/EP nanocomposites over virgin EP. Notably, the incorporation of just 1.0 wt% PN-GOs yielded a 20.4, 6.4 and 42.7 % increases in flexural strength, flexural modulus and impact strength for the PN-GOs/EP nanocomposites, respectively. Furthermore, simultaneous reductions were achieved in the peak heat release rate (pHRR) by 60.0 %, total smoke production (TSP) by 43.0 %, peak CO production rate (pCOP) by 57.9 %, and peak CO2 production rate (pCO2P) by 63.9 %. This study presented a facile method for the design of GO-based nano flame retardants, expanding their application potential in polymer-matrix composites.

Amorphous-crystalline RuTi nanosheets enhancing OH species adsorption for efficient hydrogen oxidation catalysis.

Anion exchange membrane fuel cells are a potentially cost-effective energy conversion technology, however, the electrocatalyst for the anodic hydrogen oxidation reaction (HOR) suffers from sluggish kinetics under alkaline conditions. Herein, we report that Ru-based nanosheets with amorphous-crystalline heterointerfaces of Ru and Ti-doped RuO2 (a/c-Ru/Ti-RuO2) can serve as a highly efficient HOR catalyst with a mass activity of 4.16 A mgRu-1, which is 19.8-fold higher than that of commercial Pt/C. Detailed characterization studies show that abundant amorphous-crystalline heterointerfaces of a/c-Ru/Ti-RuO2 nanosheets provide oxygen vacancies and unsaturated coordination bonds for balancing adsorption of hydrogen and hydroxyl species on Ru active sites to elevate HOR activity. Moreover, Ti doping can facilitate CO oxidation, leading to enhanced strength to CO poisoning. This work provides a strategy for enhancing alkaline HOR performance over Ru-based catalysts with heteroatom and heterointerface dual-engineering, which will attract immediate interest in chemistry, materials science and beyond.

3D Noble-Metal Nanostructures Approaching Atomic Efficiency and Atomic Density Limits.

Noble metals have been widely used in catalysis, however, the scarcity and high cost of noble metal motivate researchers to balance the atomic efficiency and atomic density, which is formidably challenging. This article proposes a robust strategy for fabricating 3D amorphous noble metal-based oxides with simultaneous enhancement on atomic efficiency and density with the assistance of atomic channels, where the atomic utilization increases from 18.2% to 59.4%. The unique properties of amorphous bimetallic oxides and formation of atomic channels have been evidenced by detailed experimental characterizations and theoretical simulations. Moreover, the universality of the current strategy is validated by other binary oxides. When Cu2IrOx with atomic channels (Cu2IrOx-AE) is used as catalyst for oxygen evolution reaction (OER), the mass activity and turnover frequency value of Cu2IrOx-AE are 1-2 orders of magnitude higher than CuO/IrO2 and Cu2IrOx without atomic channels, largely outperforming the reported OER catalysts. Theoretical calculations reveal that the formation of atomic channels leads to various Ir sites, on which the proton of adsorbed *OH can transfer to adjacent O atoms of [IrO6]. This work may attract immediate interest of researchers in material science, chemistry, catalysis, and beyond.

Metal-injection and interface density engineering induced nickel diselenide with rapid kinetics for high-energy sodium storage.

The key to the innovation of sodium-ion batteries (SIBs) is to find efficient sodium-storage electrode. Here, metal Mo doping of NiSe2 is proposed by modified electrospinning strategy followed by in situ conversion process. The Mo-NiSe2 anchoring on hollow carbon nanofibers (HCNFs) would make full use of the multi-channel HCNFs in the inner layer and the active sites of Mo-NiSe2 in the outer layer, which plays an important role in buffering the volume stress of Na+ (de)insertion and reducing the adsorption energy barrier of Na+. Innovatively, it is proposed to jointly regulate the SIBs performance of NiSe2 by both metal atom doping and interface effects, thereby adjusting the sodium ion adsorption barrier of NiSe2. The Mo-NiSe2@HCNFs exhibits remarkable performance in SIBs, demonstrating a high specific capacity of 396 mAh/g after 100 cycles at 1 A/g. Moreover, it maintains outstanding cycling stability, retaining 77.6 % of its capacity (211 mAh/g) even after 1000 cycles at 10 A/g. This comprehensive electrochemical performances are due to the structural stability and outstanding electronic conductance of the Mo-NiSe2@HCNFs, as evidenced by the diffusion analysis and ex situ charge-discharge process characterization. Furthermore, coupled with the Na3V2(PO4)2O2F cathodes, the full cell also achieves a high energy density of 123 Wh kg-1. The theoretical calculation of the hypervalent Mo doing further proves the benefit of its Na+ adsorption and denser conduction band distribution. This study provides a reference for the construction of transition metal selenide via doping and interface engineering in sodium storage.

Charge Dynamics Engineering Sparks Hetero-Interfacial Polarization for an Ultra-Efficient Microwave Absorber with Mechanical Robustness.

Microwave absorbers with high efficiency and mechanical robustness are urgently desired to cope with more complex and harsh application scenarios. However, manipulating the trade-off between microwave absorption performance and mechanical properties is seldom realized in microwave absorbers. Here, a chemistry-tailored charge dynamic engineering strategy is proposed for sparking hetero-interfacial polarization and thus coordinating microwave attenuation ability with the interfacial bonding, endowing polymer-based composites with microwave absorption efficiency and mechanical toughness. The absorber designed by this new conceptual approach exhibits remarkable Ku-band microwave absorption efficiency (-55.3 dB at a thickness of 1.5 mm) and satisfactory effective absorption bandwidth (5.0 GHz) as well as desirable interfacial shear strength (97.5 MPa). The calculated differential charge density depicts the uneven distribution of space charge and the intense hetero-interfacial polarization, clarifying the structure-performance relationship from a theoretical perspective. This work breaks through traditional single performance-oriented design methods and ushers a new direction for next-generation microwave absorbers.

Structural regulation enabled stable hollow molybdenum diselenide nanosheet anode for ultrahigh energy density sodium ion pouch cell.

For the continued use of sodium-ion batteries (SIBs), which require matching anode materials, it is crucial to create high energy density energy storage devices. Here, hollow nanoboxes shaped carbon supported sulfur-doped MoSe2 nanosheets (S-MoSe2@NC) are fabricated by in situ growth and heterodoping strategy. This ensures that the MoSe2 nanosheets are tightly anchored to the nanoboxes carbon, and the structure can effectively buffer the volume stress caused by sodium ion (de)intercalation, as well as providing abundant ion/electron migration transportations. As anode for SIBs, the S-MoSe2@NC shows a higher rate capability and excellent cycling stability (431.1 mAh/g after 1100 cycles at 10 A/g). This excellent cycle life and high rate ability are due to the structural stability and outstanding electronic conductance with reduced band gap of the S-MoSe2@NC, as evidenced by the diffusion analysis and theoretical calculation. In order to promote the application of SIBs, the S-MoSe2@NC and NaNi1/3Fe1/3Mn1/3O2 were assembled into a pouch cell, and the test found that besides the excellent cycle rate performance, the ultrahigh energy density of 256 Wh kg-1 and flexible characteristics can be achieved. This study has proven that building a structure with a rock-steady foundation and quick ion migration may efficiently control sodium storage and pave the way for novel applications of high-performance transition metal dichalcogenides in sodium storage.

Ultrahigh initial coulombic efficiency for deep sodium storage enabled by carbon-free vanadium-doping MoS2 hierarchical nanostructure.

Molybdenum disulfide (MoS2) has garnered attention as a promising anode material for sodium-ion batteries due to its high theoretical capacity and unique lamellar texture. Nevertheless, unmodified MoS2 suffers from inferior electrical conductivity, poor reaction reversibility, and suboptimal cycle life upon repeated sodiation/desodiation. In this study, a novel carbon-free V-heteroatom doping MoS2 composite (abbr. VMS) with hierarchical laurustinus-like structure was synthesized by a facile one-step hydrothermal process. Specifically, the rational doping of V-atoms can effectively modulate the intrinsic electronic structure of pure MoS2, resulting in enhanced Na-ion diffusion rate, improved reaction kinetics and reduced activation energy compared to bare MoS2. Additionally, the hierarchical structure of the VMS composite, with sufficient spacing, effectively mitigates mechanical stress and ensures the integrity of active materials. Consequently, the prepared VMS composite possesses exceptional reaction reversibility (average ICE value of 92 %) and remarkable capacity retention (92.1 % after 450 cycles at 10 A/g). These findings contribute valuable insights into the development of advanced MoS2-based anode for sodium ion batteries.

Defective ZnIn2S4 Nanosheets for Visible-Light and Sacrificial-Agent-Free H2O2 Photosynthesis via O2/H2O Redox.

H2O2 photosynthesis has attracted great interest in harvesting and converting solar energy to chemical energy. Nevertheless, the high-efficiency process of H2O2 photosynthesis is driven by the low H2O2 productivity due to the recombination of photogenerated electron-hole pairs, especially in the absence of a sacrificial agent. In this work, we demonstrate that ultrathin ZnIn2S4 nanosheets with S vacancies (Sv-ZIS) can serve as highly efficient catalysts for H2O2 photosynthesis via O2/H2O redox. Mechanism studies confirm that Sv in ZIS can extend the lifetimes of photogenerated carriers and suppress their recombination, which triggers the O2 reduction and H2O oxidation to H2O2 through radical initiation. Theoretical calculations suggest that the formation of Sv can strongly change the coordination structure of ZIS, modulating the adsorption abilities to intermediates and avoiding the overoxidation of H2O to O2 during O2/H2O redox, synergistically promoting 2e- O2 reduction and 2e- H2O oxidation for ultrahigh H2O2 productivity. The optimal catalyst displays a H2O2 productivity of 1706.4 µmol g-1 h-1 under visible-light irradiation without a sacrificial agent, which is ∼29 times higher than that of pristine ZIS (59.4 µmol g-1 h-1) and even much higher than those of reported photocatalysts. Impressively, the apparent quantum efficiency is up to 9.9% at 420 nm, and the solar-to-chemical conversion efficiency reaches ∼0.81%, significantly higher than the value for natural synthetic plants (∼0.10%). This work provides a facile strategy to separate the photogenerated electron-hole pairs of ZIS for H2O2 photosynthesis, which may promote fundamental research on solar energy harvest and conversion.

Aliovalent doping and structural design of MoSe2 with fast reaction kinetics for high-stable sodium-ion half/full batteries.

The development of high-quality anode materials is critical for the advancement of sodium-ion batteries (SIBs). MoSe2 is a candidate anode for SIBs, while its inherent limitations, such as the agglomeration of nanosheets, poor electron conductance and mechanical strain due to volume changes during cycling, which can lead to decreased performance and durability in SIBs. To overcome the challenges, a novel aliovalent doping and structural engineering was taken to prepare reduced graphene oxide (rGO) functionalized and phosphorus-doped MoSe2 flake (P-MoSe2@rGO) via in situ growth technique. The unique structural design of P-MoSe2@rGO addresses material limitations and optimizes performance by providing a high conductive grid for ion/electron transfer, a large surface area for full electrolyte penetration, and effective suppression of MoSe2 nanosheet agglomeration and mechanical strain due to volume change during charge/discharge in SIBs. The P-MoSe2@rGO inherits the enhanced electronic conductivity and enlarged layer spacing (from 0.652 to 0.668 nm), which boosts the reaction kinetics and facilitates the insertion/extraction of sodium ions. The P-MoSe2@rGO exhibits excellent long-cycle properties with a high reversible capacity of 384 mAh/g at 2 A/g and 338 mAh/g at 10 A/g after 1450 circulations. Detailed discussion of reaction kinetics is conducted. Theoretical calculations prove that doping of P atoms in MoSe2 reduces the forbidden band gap from 1.443 to 1.397 eV and accelerates ion and electron migration. Furthermore, the full cell P-MoSe2@rGO//Na3V2(PO4)3@C (NVP@C) demonstrates a remarkable cycling durability of 326 mAh/g after 200 cycles and a high energy density of 159.6 Wh kg-1. This process provides a reference for the adjustment and modification of MoSe2 to adapt to high performance SIBs anode.

In situ Cu doping of ultralarge CoSe nanosheets with accelerated electronic migration for superior sodium-ion storage.

The progress of sodium-ion batteries is currently confronted with a noteworthy obstacle, specifically the paucity of electrode materials that can store large quantities of Na+ in a reversible fashion while maintaining competitiveness. Herein, ultrafast and long-life sodium storage of metal selenides is rationally demonstrated by employing micron-sized nanosheets (Cu-CoSe@NC) through electron accumulation engineering. The nanosheet structure proves to be effective in reducing the transport distance of sodium ions. Furthermore, the addition of Cu ions enhances the electron conductivity of CoSe and accelerates charge delocalization. As an anode for sodium-ion batteries, Cu-CoSe@NC exhibits a noticeably enhanced specific capacity of 527.2 mA h g-1 at 1.0 A g-1 after 100 cycles. Additionally, Cu-CoSe@NC maintains a capacity of 428.5 mA h g-1 at 5.0 A g-1 after 800 cycles. It is possible to create sodium-ion full batteries with a high energy density of 101.1 W h kg-1. The superior sodium storage performance of Cu-CoSe@NC is attributed to the high pseudo-capacitance and diffusion control mechanisms, as evidenced by theoretical calculations and ex situ measurements.

Manipulating Molecular Structure to Trigger Ultrafast and Long-Life Potassium Storage of Fe0.4 Ni0.6 S Solid Solution.

Currently, the main obstacle to the widespread utilization of metal chalcogenides (MSx ) as anode for potassium-ion batteries (PIBs) is their poor rate capability and inferior cycling stability as a result of the undesirable electrical conductivity and severe pulverization of the nanostructure during large K-ions intercalation-extraction processes. Herein, an ultrafast and long-life potassium storage of metal chalcogenide is rationally demonstrated by employing Fe0.4 Ni0.6 S solid-solution (FNS/C) through molecular structure engineering. Benefiting from improved electroactivity and intense interactions within the unique solid solution phase, the electrical conductivity and structure durability of Fe0.4 Ni0.6 S are vastly improved. As anticipated, the FNS/C electrode delivers superior rate properties (538.7 and 210.5 mAh g-1 at 0.1 and 10 A g-1 , respectively) and long-term cycle stability (180.8 mAh g-1 at 5 A g-1 after 2000 cycles with a capacity decay of 0.011% per cycle). Moreover, the potassium storage mechanisms of Fe0.4 Ni0.6 S solid solution are comprehensively revealed by several in situ characterizations and theoretical calculations. This innovative molecular structure engineering strategy opens avenues to achieve high-quality metal chalcogenides for future advanced PIBs.

Interfacial covalent bonding of the MXene-stabilized Sb2Se3 nanotube hybrid with fast ion transport for enhanced sodium-ion half/full batteries.

An interfacial covalent bonding strategy is proposed for the synthesis of the MXene-stabilized Sb2Se3 nanotube hybrid. As an anode material, the prepared Sb2Se3@NC/MXene exhibits an enhanced sodium-ion battery performance in half/full batteries in terms of a high specific and cycling stability.

Medium/High-Entropy Amalgamated Core/Shell Nanoplate Achieves Efficient Formic Acid Catalysis for Direct Formic Acid Fuel Cell.

High-entropy alloys (HEAs) have been attracting extensive research interests in designing advanced nanomaterials, while their precise control is still in the infancy stage. Herein, we have reported a well-defined PtBiPbNiCo hexagonal nanoplates (HEA HPs) as high-performance electrocatalysts. Structure analysis decodes that the HEA HP is constructed with PtBiPb medium-entropy core and PtBiNiCo high-entropy shell. Significantly, the HEA HPs can reach the specific and mass activities of 27.2 mA cm-2 and 7.1 A mgPt -1 for formic acid oxidation reaction (FAOR), being the record catalyst ever achieved in Pt-based catalysts, and can realize the membrane electrode assembly (MEA) power density (321.2 mW cm-2 ) in fuel cell. Further experimental and theoretical analyses collectively evidence that the hexagonal intermetallic core/atomic layer shell structure and multi-element synergy greatly promote the direct dehydrogenation pathway of formic acid molecule and suppress the formation of CO*.

Structural engineering of bimetallic selenides for high-energy density sodium-ion half/full batteries.

The shortage of high-capacity anode materials with long cycling stability is the main roadblock to the development of sodium-ion batteries (SIBs). The advantages of transition metal selenides are high theoretical capacity, safety and ease of design, which gradually make them potential substitute materials for the anodes of a new generation of SIBs. However, the low intrinsic conductivity of transition metal selenides and the serious powderization during charge and discharge processes restrict their rate performance and cycling stability in SIBs. Herein, bimetallic selenide ZnSe/MoSe2@NC is fabricated by in situ selenation of a rhombic dodecahedron structured metal-organic framework (MOF) containing Zn/Mo salt. Such a heterojunction and structural regulation effectively promote sodium ion transportation. Furthermore, the porous and hierarchical ZnSe/MoSe2@NC is capable of adapting to the volume stress generated by sodium ion (de)insertion. Specifically, in SIB half-cell measurement, a comparable capacity of 401.8 mA h g-1 after 100 cycles at 1 A g-1 can be achieved by ZnSe/MoSe2@NC. Additionally, the ZnSe/MoSe2@NC polyhedron delivers a high capacity of 345.7 mA h g-1 at 5 A g-1 (1500 cycles). Electrochemical kinetics analysis is performed in detail. In SIB full battery applications, the cell shows an impressive energy density of 175.1 W h kg-1. This research broadens the development prospect of transition metal selenides as anodes in SIBs.

Pd-Sb Rhombohedra with an Unconventional Rhombohedral Phase as a Trifunctional Electrocatalyst.

Crystal phase engineering is an important strategy for designing noble-metal-based catalysts with optimized activity and stability. From the thermodynamic point of view, it remains a great challenge to synthesize unconventional phases of noble metals. Here, a new class of Pd-based nanostructure with unconventional rhombohedral Pd20 Sb7 phase is successfully synthesized. Benefiting from the high proportion of the unique exposed Pd20 Sb7 (003) surface, Pd20 Sb7 rhombohedra display much enhanced ethanol oxidation reaction (EOR) and oxygen reduction reaction performance compared with commercial Pd/C. Moreover, Pd20 Sb7 rhombohedra are also demonstrated as an effective air cathode in non-aqueous Li-air batteries with an overpotential of only 0.24 V. Density functional theory calculations reveal that the unique exposed facets of Pd20 Sb7 rhombohedra can not only reduce the excessive adsorption of CH3 CO* to CH3 COOH on Pd for promoting EOR process, but also weaken CO binding and CO poisoning. This work provides a new class of unconventional intermetallic nanomaterials with enhanced electrocatalytic activity.

Integrating Multi-Heterointerfaces in a 1D@2D@1D Hierarchical Structure via Autocatalytic Pyrolysis for Ultra-Efficient Microwave Absorption Performance.

Developing microwave absorption (MA) materials with ultrahigh efficiency and facile preparation method remains a challenge. Herein, a superior 1D@2D@1D hierarchical structure integrated with multi-heterointerfaces via self-assembly and an autocatalytic pyrolysis is designed to fully unlock the microwave attenuation potential of materials, realizing ultra-efficient MA performance. By precisely regulating the morphology of the metal organic framework precursor toward improved impedance matching and intelligently integrating multi-heterointerfaces to boosted dielectric polarization, the specific return loss value of composites can be effectively tuned and optimized to -1002 dB at a very thin thickness of 1.8 mm. These encouraging achievements shed fresh insights into the precise design of ultra-efficient MA materials.

Pseudocapacitance-boosted ultrafast and stable Na-storage in NiTe2 coupled with N-doped carbon nanosheets for advanced sodium-ion half/full batteries.

Developing high-rate and durable anode materials for sodium-ion batteries (SIBs) is still a challenge because of the larger ion radius of sodium compared with the lithium ion during charge-discharge processes. Herein, NiTe2 coupled with N-doped carbon (NiTe2/NC) hexagonal nanosheets has been fabricated through a solvothermal and subsequent carbonisation strategy. This unique hexagonal nanosheet structure offers abundant active sites and contact area to the electrolyte, which could shorten the Na+ diffusion path. The heterostructured N-doping carbon improves the electrochemical conductivity and accelerates the kinetics of Na+ transportation. Electrochemical analysis shows that the charge-discharge process is controlled by the pseudocapacitive behavior thus leading to high-rate capability and long lifespan in half batteries. As expected, high capacities of 311 mA h g-1 to 217 mA h g-1 at 5 A g-1 to 10 A g-1 are maintained after 800 and 1200 cycles, respectively. Furthermore, a full battery equipped with a Na3V2(PO4)2O2F cathode and a NiTe2/NC anode offers a maximum energy density of 104 W h kg-1 and a maximum power density of 9116 W kg-1. The results clearly show that the NiTe2/NC hexagonal nanosheet with superior Na storage properties is an advanced new material for energy storage systems.

Constructing electronic interconnected bimetallic selenide-filled porous carbon nanosheets for stable and highly efficient sodium-ion half/full batteries.

Owing to their large theoretical capacity and relatively high electronic conductivity, transition metal selenides have been investigated as potential anodes for energy storage applications. On the other hand, the quick capacity decline induced by volume expansion during cycling and unconnected conducting network of the transition metal selenide-based electrode severely limit their employment in sodium-ion batteries (SIBs). Herein, a simple solvent ultrasonic technique and pyrolysis selenation process were used to make a porous N-doped carbon nanosheet-supported FeSe2/CoSe2 electrode. The electrochemical kinetics could be improved, and the stress generated by volume expansion could be efficiently adjusted by exquisitely constructed boundary of the FeSe2/CoSe2-CN electrode. As expected, the FeSe2/CoSe2-CN porous nanosheets exhibited a high Na+ storage capacity of 350 mA h g-1 (10 A g-1, 1000 cycles). Kinetic studies were conducted to explore the Na+ storage mechanism of FeSe2/CoSe2-CN. The as-constructed full sodium-ion batteries, when combined with Na3V2(PO4)2O2F, have a phenomenal energy density (109 W h kg-1), encouraging the exploration of energy-related components with the high-energy density properties.

Modulation of MoS2 interlayer dynamics by in situ N-doped carbon intercalation for high-rate sodium-ion half/full batteries.

In comparison with lithium-ion batteries, sodium-ion batteries (SIBs) have been proposed as an alternative for large-scale energy storage. However, finding an anode material that can overcome the sluggish electrochemical reaction kinetics and fast capacity fading caused by large volume expansion during cycling is problematic. In this study, the intercalation technique for nitrogen-doped carbon layers is implemented for the molybdenum disulfide (MoS2/NC) structure to improve the rate and cycling stability of SIBs by increasing the diffusion rate of sodium ions and mitigating excessive volume structural expansion. The as-synthesized MoS2/NC anode has a high discharge specific capacity of 546 mA h g-1 at 1 A g-1 after 160 cycles, as well as a high rate and stable cycle performance of 406 mA h g-1 at 10 A g-1 after 1000 cycles. Upon coupling with a high-voltage Na3V2(PO4)2O2F cathode, the sodium-ion full battery displays high specific energies of 78.57 W h kg-1 and 49.70 W h kg-1 at specific powers of 193.76 W kg-1 and 3756.80 W kg-1, respectively, with commercialization potential demonstrated.

Suppressing vanadium dissolution of V2O5via in situ polyethylene glycol intercalation towards ultralong lifetime room/low-temperature zinc-ion batteries.

Zinc-ion batteries (ZIBs) are a main focus worldwide for their potential use in large-scale energy storage due to their abundant resources, environmental friendliness, and high safety. However, the cathode materials of ZIBs are limited, requiring a stable host structure and fast Zn2+ channel diffusion. Here, we develop a strategy for the intercalation of polyethylene glycol (PEG) to facilitate Zn2+ intercalation and to suppress the dissolution of vanadium in V2O5. In particular, PEG-V2O5 shows a high capacity of 430 mA h g-1 at a current density of 0.1 A g-1 as well as excellent 100 mA h g-1 specific capacity after 5000 cycles, with a high current density of 10.0 A g-1. A reversible capacity of 81 mA h g-1 can even be achieved with a low temperature of -20 °C at a current density of 2.0 A g-1 after 3500 cycles. The superior electrochemical performance comes from the intercalation of PEG molecules, which can improve kinetic transport and structural stability during the cycling process. The Zn2+ storage mechanism, which provides essential guidelines for the development of high-performance ZIBs, can be found through various ex situ characterization technologies and density functional density calculations.