Triploid Pacific oysters exhibit stress response dysregulation and elevated mortality following heatwaves.

Polyploidy has been suggested to negatively impact environmental stress tolerance, resulting in increased susceptibility to extreme climate events. In this study, we compared the genomic and physiological response of diploid (2n) and triploid (3n) Pacific oysters (Crassostrea gigas) to conditions present during an atmospheric heatwave that impacted the Pacific Northwestern region of the United States in the summer of 2021. Climate stressors were applied either singly (single stressor; elevated seawater temperature, 30°C) or in succession (multiple stressor; elevated seawater temperature followed by aerial emersion at 44°C), replicating conditions present within the intertidal over a tidal cycle during the event. Oyster mortality rate was elevated within stress treatments with respect to the control and was significantly higher in triploids than diploids following multiple stress exposure (36.4% vs. 14.8%). Triploids within the multiple stressor treatment exhibited signs of energetic limitation, including metabolic depression, a significant reduction in ctenidium Na+ /K+ ATPase activity, and the dysregulated expression of genes associated with stress response, innate immunity, glucose metabolism, and mitochondrial function. Functional enrichment analysis of ploidy-specific gene sets identified that biological processes associated with metabolism, stress tolerance, and immune function were overrepresented within triploids across stress treatments. Our results suggest that triploidy impacts the transcriptional regulation of key processes that underly the stress response of Pacific oysters, resulting in downstream shifts in physiological tolerance limits that may increase susceptibility to extreme climate events that present multiple environmental stressors. The impact of chromosome set manipulation on the climate resilience of marine organisms has important implications for domestic food security within future climate scenarios, especially as triploidy induction becomes an increasingly popular tool to elicit reproductive control across a wide range of species used within marine aquaculture.

Injectable pH-responsive adhesive hydrogels for bone tissue engineering inspired by the underwater attachment strategy of marine mussels.

A major challenge in tissue engineering is the development of alternatives to traditional bone autografts and allografts that can regenerate critical-sized bone defects. Here we present the design of injectable pH-responsive double-crosslinked adhesive hydrogels inspired by the molecular mechanism and environmental post-processing of marine mussel adhesive. Nine adhesive hydrogel formulations were developed through the conjugation of crosslinkable catechol functional groups (DOPA) and the synthetic oligomer oligo[poly(ethylene glycol) fumarate] (OPF), varying the DOPA content (w/w%) and molecular weight (MW) of the OPF backbone to produce formulations with a range of swelling ratios, porosities, and crosslink densities. DOPA incorporation altered the surface chemistry, mechanical properties, and surface topography of hydrogels, resulting in an increase in material stiffness, slower degradation, and enhanced pre-osteoblast cell attachment and proliferation. When injected within simulated bone defects, DOPA-mediated interfacial adhesive interactions also prevented the displacement of scaffolds, an effect that was maintained even after swelling within physiological conditions. Taken together, OPF-DOPA hydrogels represent a promising new material to enhanced tissue integration and the prevention of the post-implantation migration of scaffolds that can occur due to biomechanical loading in vivo.

Genome Editing Human Pluripotent Stem Cells to Model ß-Cell Disease and Unmask Novel Genetic Modifiers.

A mechanistic understanding of the genetic basis of complex diseases such as diabetes mellitus remain elusive due in large part to the activity of genetic disease modifiers that impact the penetrance and/or presentation of disease phenotypes. In the face of such complexity, rare forms of diabetes that result from single-gene mutations (monogenic diabetes) can be used to model the contribution of individual genetic factors to pancreatic ß-cell dysfunction and the breakdown of glucose homeostasis. Here we review the contribution of protein coding and non-protein coding genetic disease modifiers to the pathogenesis of diabetes subtypes, as well as how recent technological advances in the generation, differentiation, and genome editing of human pluripotent stem cells (hPSC) enable the development of cell-based disease models. Finally, we describe a disease modifier discovery platform that utilizes these technologies to identify novel genetic modifiers using induced pluripotent stem cells (iPSC) derived from patients with monogenic diabetes caused by heterozygous mutations.

Black phosphorus incorporation modulates nanocomposite hydrogel properties and subsequent MC3T3 cell attachment, proliferation, and differentiation.

A promising strategy that emerged in tissue engineering is to incorporate two-dimensional (2D) materials into polymer scaffolds, producing materials with desirable mechanical properties and surface chemistries, which also display broad biocompatibility. Black phosphorus (BP) is a 2D material that has sparked recent scientific interest due to its unique structure and electrochemical characteristics. In this study, BP nanosheets (BPNSs) were incorporated into a cross-linkable oligo[poly(ethylene glycol) fumarate] (OPF) hydrogel to produce a new nanocomposite for bone regeneration. BPNSs exhibited a controllable degradation rate coupled with the release of phosphate in vitro. MTS assay results together with live/dead images confirmed that the introduction of BPNSs into OPF hydrogels enhanced MC3T3-E1 cell proliferation. Moreover, the morphology parameters indicated better attachments of cells in the BPNSs containing group. Immunofluorescence images as well as intercellular ALP and OCN activities showed that adding a certain amount of BPNSs to OPF hydrogel could greatly improve differentiation of pre-osteoblasts on the hydrogel. Additionally, embedding black phosphorous into a neutral polymer network helped to control its cytotoxicity, with optimal cell growth observed at BP concentrations as high as 500 ppm. These results reinforced that the supplementation of OPF with BPNSs can increase the osteogenic capacity of polymer scaffolds for use in bone tissue engineering.

2D phosphorene nanosheets, quantum dots, nanoribbons: synthesis and biomedical applications.

Phosphorene, also known as black phosphorus (BP), is a two-dimensional (2D) material that has gained significant attention in several areas of current research. Its unique properties such as outstanding surface activity, an adjustable bandgap width, favorable on/off current ratios, infrared-light responsiveness, good biocompatibility, and fast biodegradation differentiate this material from other two-dimensional materials. The application of BP in the biomedical field has been rapidly emerging over the past few years. This article aimed to provide a comprehensive review of the recent progress on the unique properties and extensive medical applications for BP in bone, nerve, skin, kidney, cancer, and biosensing related treatment. The details of applications of BP in these fields were summarized and discussed.

Enhanced nerve cell proliferation and differentiation on electrically conductive scaffolds embedded with graphene and carbon nanotubes.

Conduits that promote nerve regeneration are currently of great medical concern, particularly when gaps exist between nerve endings. To address this issue, our laboratory previously developed a nerve conduit from biodegradable poly(caprolactone fumarate) (PCLF) that supports peripheral nerve regeneration. The present study improves upon this work by further developing an electrically conductive, positively charged PCLF scaffold through the incorporation of graphene, carbon nanotubes (CNTs), and [2-(methacryloyloxy)ethyl]trimethylammonium chloride (MTAC) (PCLF-Graphene-CNT-MTAC) using ultraviolet (UV) induced photocrosslinking. Scanning electron microscopy, transmission electron microscopy, and atomic force microscopy were used to assess the incorporation of CNTs and graphene into PCLF-Graphene-CNT-MTAC scaffolds, which displayed enhanced surface roughness and reduced electrochemical impedance when compared to neat PCLF. Scaffolds with these surface modifications also showed improved growth and differentiation of rat pheochromocytoma 12 cells in vitro, with enhanced cell growth, neurite extension, and cellular migration. Furthermore, an increased number of neurite protrusions were observed when the conduit was electrically stimulated. These results show that the electrically conductive PCLF-Graphene-CNT-MTAC nerve scaffolds presented here support the cellular behaviors that are critical for nerve regeneration, ultimately making this material an attractive candidate for regenerative medicine applications.

3D bioprinting of oligo(poly[ethylene glycol] fumarate) for bone and nerve tissue engineering.

3D bioprinting is a promising new tissue restoration technique that enables the precise deposition of cells and growth factors in order to more closely mimic the structure and function of native organs. In this study, we report the development of a new bioink using oligo(poly[ethylene glycol] fumarate) (OPF), a photo-crosslinkable, and biodegradable polymer, for 3D bioprinting. In addition to OPF, a small portion of gelatin was also incorporated into the bioink to make it bio-printable. After immersion in the cell medium, gelatin was eluted away to create a bioprinted scaffold of pure OPF. Excellent cell viability, spreading, and long-term proliferation of encapsulated cells was observed using both bone and nerve cells as examples. These results demonstrate that OPF bioink has great potential in future 3D bioprinting applications that aim to replicate complex, layered tissues, and/or organs.

3D-printed scaffolds with carbon nanotubes for bone tissue engineering: Fast and homogeneous one-step functionalization.

Three-dimensional (3D) printing is a promising technology for tissue engineering. However, 3D-printing methods are limited in their ability to produce desired microscale features or electrochemical properties in support of robust cell adhesion, proliferation, and differentiation. This study addresses this deficiency by proposing an integrated, one-step, method to increase the cytocompatibility of 3D-printed scaffolds through functionalization leveraging conductive carbon nanotubes (CNTs). To this end, CNTs were first sonicated with water-soluble single-stranded deoxyribonucleic acid (ssDNA) to generate a negatively charged ssDNA@CNT nano-complex. Concomitantly, 3D-printed poly(propylene fumarate) (PPF) scaffolds were ammonolyzed to introduce free amine groups, which can take on a positive surface charge in water. The ssDNA@CNT nano-complex was then applied to 3D-printed scaffolds through a simple one-step coating utilizing electric-static force. This fast and facile functionalization step resulted in a homogenous and non-toxic coating of CNTs to the surface, which significantly improved the adhesion, proliferation, and differentiation of pre-osteoblast cells. In addition, the CNT based conductive coating layer enabled modulation of cell behavior through electrical stimuli (ES) leading to cellular proliferation and osteogenic gene marker expression, including alkaline phosphatase (ALP), osteocalcin (OCN), and osteopontin (OPN). Collectively, these data provide the foundation for a one-step functionalization method for simple, fast, and effective functionalization of 3D printed scaffolds that support enhanced cell adhesion, proliferation, and differentiation, especially when employed in conjunction with ES. STATEMENT OF SIGNIFICANCE: Three-dimensional (3D) printing is a promising technology for tissue engineering. However, 3D-printing methods have limited ability to produce desired features or electrochemical properties in support of robust cell behavior. To address this deficiency, the current study proposed an integrated, one-step method to increase the cytocompatibility of 3D-printed scaffolds through functionalization leveraging conductive carbon nanotubes (CNTs). This fast and facile functionalization resulted in a homogenous and non-toxic coating of CNTs to the surface, which significantly improved the adhesion, proliferation, and differentiation of cells on the 3D-printed scaffolds.

Phosphate functionalization and enzymatic calcium mineralization synergistically enhance oligo[poly(ethylene glycol) fumarate] hydrogel osteoconductivity for bone tissue engineering.

A current approach in bone tissue engineering is the implantation of polymeric scaffolds that promote osteoblast attachment and growth as well as biomineralization. One promising polymer is oligo[poly(ethylene glycol) fumarate] (OPF), a polyethylene glycol-based material that is biocompatible, injectable, and biodegradable, but in its native form does not support robust bone cell attachment or growth. To address this issue, this study evaluated the osteoconductivity of bis[02-(methacryloyloxy)ethyl] phosphate (BP) functionalized OPF hydrogels (OPF-BP) using MC3T3-E1 pre-osteoblast cells, both before and after enzymatic mineralization with a calcium solution. The inclusion of negatively charged functional groups allowed for the tailored uptake and release of calcium, while also altering the mechanical properties and surface topography of the hydrogel surface. In cell culture, OPF-BP hydrogels with 20 and 30% (w/w) BP optimized osteoblast attachment, proliferation, and differentiation after a 21-day in vitro period. In addition, the OPF-BP30 treatment, when mineralized with calcium, exhibited a 128% increase in osteocalcin expression when compared with the non-mineralized treatment. These findings suggest that phosphate functionalization and enzymatic calcium mineralization can act synergistically to enhance the osteoconductivity of OPF hydrogels, making this processed material an attractive candidate for bone tissue engineering applications.

Injectable Electrical Conductive and Phosphate Releasing Gel with Two-Dimensional Black Phosphorus and Carbon Nanotubes for Bone Tissue Engineering.

Injectable hydrogels have unique advantages for the repair of irregular tissue defects. In this study, we report a novel injectable carbon nanotube (CNT) and black phosphorus (BP) gel with enhanced mechanical strength, electrical conductivity, and continuous phosphate ion release for tissue engineering. The gel utilized biodegradable oligo(poly(ethylene glycol) fumarate) (OPF) polymer as the cross-linking matrix, with the addition of cross-linkable CNT-poly(ethylene glycol)-acrylate (CNTpega) to grant mechanical support and electric conductivity. Two-dimensional (2D) black phosphorus nanosheets were also infused to aid in tissue regeneration through the steady release of phosphate that results from environmental oxidation of phosphorus in situ. This newly developed BP-CNTpega-gel was found to enhance the adhesion, proliferation, and osteogenic differentiation of MC3T3 preosteoblast cells. With electric stimulation, the osteogenesis of preosteoblast cells was further enhanced with elevated expression of several key osteogenic pathway genes. As monitored with X-ray imaging, the BP-CNTpega-gel demonstrated excellent in situ gelation and cross-linking to fill femur defects, vertebral body cavities, and posterolateral spinal fusion sites in the rabbit. Together, these results indicate that this newly developed injectable BP-CNTpega-gel owns promising potential for future bone and broad types of tissue engineering applications.

Only as strong as the weakest link: structural analysis of the combined effects of elevated temperature and pCO2 on mussel attachment.

Predicting how combinations of stressors will affect failure risk is a key challenge for the field of ecomechanics and, more generally, ecophysiology. Environmental conditions often influence the manufacture and durability of biomaterials, inducing structural failure that potentially compromises organismal reproduction, growth, and survival. Species known for tight linkages between structural integrity and survival include bivalve mussels, which produce numerous byssal threads to attach to hard substrate. Among the current environmental threats to marine organisms are ocean warming and acidification. Elevated pCO2 exposure is known to weaken byssal threads by compromising the strength of the adhesive plaque. This study uses structural analysis to evaluate how an additional stressor, elevated temperature, influences byssal thread quality and production. Mussels (Mytilus trossulus) were placed in controlled temperature and pCO2 treatments, and then, newly produced threads were counted and pulled to failure to determine byssus strength. The effects of elevated temperature on mussel attachment were dramatic; mussels produced 60% weaker and 65% fewer threads at 25°C in comparison to 10°C. These effects combine to weaken overall attachment by 64-88% at 25°C. The magnitude of the effect of pCO2 on thread strength was substantially lower than that of temperature and, contrary to our expectations, positive at high pCO2 exposure. Failure mode analysis localized the effect of temperature to the proximal region of the thread, whereas pCO2 affected only the adhesive plaques. The two stressors therefore act independently, and because their respective target regions are interconnected (resisting tension in series), their combined effects on thread strength are exactly equal to the effect of the strongest stressor. Altogether, these results show that mussels, and the coastal communities they support, may be more vulnerable to the negative effects of ocean warming than ocean acidification.

Two-Dimensional Black Phosphorus and Graphene Oxide Nanosheets Synergistically Enhance Cell Proliferation and Osteogenesis on 3D Printed Scaffolds.

Two-dimensional (2D) materials have emerged as a new promising research topic for tissue engineering because of their ability to alter the surface properties of tissue scaffolds and thus improve their biocompatibility and cell affinity. Multiple 2D materials, such as graphene and graphene oxide (GO), have been widely reported to enhance cell adhesion and proliferation. Recently, a newly emerged black phosphorus (BP) 2D material has attracted attention in biomedical applications because of its unique mechanical and electrochemical characteristics. In this study, we investigated the synergistic effect of these two types of 2D materials on cell osteogenesis for bone tissue engineering. BP was first wrapped in negatively charged GO nanosheets, which were then adsorbed together onto positively charged poly(propylene fumarate) three-dimensional (3D) scaffolds. The increased surface area provided by GO nanosheets would enhance cell attachment at the initial stage. In addition, slow oxidation of BP nanosheets wrapped within GO layers would generate a continuous release of phosphate, an important osteoblast differentiation facilitator designed to stimulate cell osteogenesis toward the new bone formation. Through the use of 3D confocal imaging, unique interactions between cells and BP nanosheets were observed, including a stretched cell shape and the development of filaments around the BP nanosheets, along with increased cell proliferation when compared with scaffolds incorporating only one of the 2D materials. Furthermore, the biomineralization of 3D scaffolds, as well as cellular osteogenic markers, was all measured and improved on scaffolds with both BP and GO nanosheets. All these results indicate that the incorporation of 2D BP and GO materials could effectively and synergistically stimulate cell proliferation and osteogenesis on 3D tissue scaffolds.

Hypoxia weakens mussel attachment by interrupting DOPA cross-linking during adhesive plaque curing.

Marine mussels (Mytilus spp.) attach to a wide variety of surfaces underwater using a network of byssal threads, each tipped with a protein-based adhesive plaque that uses the surrounding seawater environment as a curing agent. Plaques undergo environmental post-processing, requiring a basic seawater pH be maintained for up to 8 days for the adhesive to strengthen completely. Given the sensitivity of plaques to local pH conditions long after deposition, we investigated the effect of other aspects of the seawater environment that are known to vary in nearshore habitats on plaque curing. The effect of seawater temperature, salinity and dissolved oxygen concentration were investigated using tensile testing, atomic force microscopy and amino acid compositional analysis. High temperature (30°C) and hyposalinity (1 PSU) had no effect on adhesion strength, while incubation in hypoxia (0.9 mg l-1) caused plaques to have a mottled coloration and prematurely peel from substrates, leading to a 51% decrease in adhesion strength. AFM imaging of the plaque cuticle found that plaques cured in hypoxia had regions of lower stiffness throughout, indicative of reductions in DOPA cross-linking between adhesive proteins. A better understanding of the dynamics of plaque curing could aid in the design of better synthetic adhesives, particularly in medicine where adhesion must take place within wet body cavities.

Environmental post-processing increases the adhesion strength of mussel byssus adhesive.

Marine mussels (Mytilus trossulus) attach to a wide variety of surfaces underwater using a protein adhesive that is cured by the surrounding seawater environment. In this study, the influence of environmental post-processing on adhesion strength was investigated by aging adhesive plaques in a range of seawater pH conditions. Plaques took 8-12 days to achieve full strength at pH 8, nearly doubling in adhesion strength (+94%) and increasing the work required to dislodge (+59%). Holding plaques in low pH conditions prevented strengthening, causing the material to tear more frequently under tension. The timescale of strengthening is consistent with the conversion of DOPA to DOPA-quinone, a pH dependent process that promotes cross-linking between adhesive proteins. The precise arrangement of DOPA containing proteins away from the adhesive-substratum interface emphasizes the role that structural organization can have on function, an insight that could lead to the design of better synthetic adhesives and metal-coordinating hydrogels.

Evolutionary variation in the mechanics of fiddler crab claws.

BACKGROUND: Fiddler crabs, genus Uca, are classic examples of how intense sexual selection can produce exaggerated male traits. Throughout the genus the enlarged "major" cheliped (claw) of the male fiddler crab is used both as a signal for attracting females and as a weapon for combat with other males. However, the morphology of the major claw is highly variable across the approximately 100 species within the genus. Here we address variation, scaling, and correlated evolution in the mechanics of the major claw by analyzing the morphology and mechanical properties of the claws of 21 species of fiddler crabs from the Pacific, Gulf and Atlantic coasts of the Americas. RESULTS: We find that the mechanics that produce claw closing forces, the sizes of claws and the mechanical strength of the cuticle of claws are all highly variable across the genus. Most variables scale isometrically with body size across species but claw force production scales allometrically with body size. Using phylogenetically independent contrasts, we find that the force that a claw can potentially produce is positively correlated with the strength of the cuticle on the claw where forces are delivered in a fight. There is also a negative correlation between the force that a claw can potentially produce and the size of the claw corrected for the mass of the claw. CONCLUSIONS: These relationships suggest that there has been correlated evolution between force production and armoring, and that there is a tradeoff between claw mechanics for signaling and claw mechanics for fighting.