Plant agronomy, leaf ecophysiology, yield and quality data of interspecific grafted Coffea arabica across an elevation gradient.

In-field data were collected in Costa Rica between 2018-2021 on newly planted grafted and non-grafted coffee plants grown under artificial shade nets and across an elevation gradient (1050, 1250 and 1450 m.a.s.l). The coffee plants consisted of Coffea arabica F1 hybrid plants ('H3 i.e. Caturra cv. X Ethiopian 531'), which were derived from a somatic embryogenesis clonal propagation process, an American C. arabica pure line ('Villa Sarchi') and C. canephora 'Nemaya' (the latter two both being produced by seed). Data from eight different coffee types (including these three genotypes) and different grafting combinations (including reverse and auto-grafting) were collected. Data concerned plant traits such as grafting compatibility (plant collar diameters above and below graft union), agronomic characteristics (aerial and root traits), leaf ecophysiology (leaf gas-exchange and chlorophyll fluorescence), yield and quality attributes (bean size, peaberry percentage, WB100 and SCA note). Climate data were also included for comparison on the farm plots along the elevation gradient. Linear mixed models were used to test for effects of elevation (test sites), coffee types (grafted or non-grafted combinations) and interaction between coffee types and elevations. Least square mean estimates were calculated for significant fixed effects and Tukey tests applied for pairwise tests. A tangential hyperbola curve was used to analyse leaf gas-exchange data. These datasets and R scripts can be re-used as a guide for future analyses concerning coffee agronomy or eco-physiological interactions for other plant species. Other potential re-uses could be meta-analyses aimed at comparing coffee yield, quality, or other agronomic traits across different environmental conditions (such as under shade of an agroforestry system or across different elevation sites).

Genetic-environment interactions and climatic variables effect on bean physical characteristics and chemical composition of Coffea arabica.

BACKGROUND: The effects of the environment and genotype in the coffee bean chemical composition were studied using nine trials covering an altitudinal gradient [600-1100 m above sea level (a.s.l.)] with three genotypes of Coffea arabica in the northwest mountainous region of Vietnam. The impacts of the climatic conditions on bean physical characteristics and chemical composition were assessed. RESULTS: We showed that the environment had a significant effect on the bean density and on all bean chemical compounds. The environment effect was stronger than the genotype and genotype-environment interaction effects for cafestol, kahweol, arachidic (C20:0), behenic acid (C22:0), 2,3-butanediol, 2-methyl-2-buten-1-ol, benzaldehyde, benzene ethanol, butyrolactone, decane, dodecane, ethanol, pentanoic acid, and phenylacetaldehyde bean content. A 2 °C increase in temperature had more influence on bean chemical compounds than a 100 mm increase in soil water content. Temperature was positively correlated with lipids and volatile compounds. With an innovative method using iterative moving averages, we showed that correlation of temperature, vapour pressure deficit (VPD) and rainfall with lipids and volatiles was higher between the 10th and 20th weeks after flowering highlighting this period as crucial for the synthesis of these chemicals. Genotype specific responses were evidenced and could be considered in future breeding programmes to maintain coffee beverage quality in the midst of climate change. CONCLUSION: This first study of the effect of the genotype-environment interactions on chemical compounds enhances our understanding of the sensitivity of coffee quality to genotype environment interactions during bean development. This work addresses the growing concern of the effect of climate change on speciality crops and more specifically coffee. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Global transcriptome profiling reveals differential regulatory, metabolic and hormonal networks during somatic embryogenesis in Coffea arabica.

BACKGROUND: Somatic embryogenesis (SE) is one of the most promising processes for large-scale dissemination of elite varieties. However, for many plant species, optimizing SE protocols still relies on a trial and error approach. We report the first global scale transcriptome profiling performed at all developmental stages of SE in coffee to unravel the mechanisms that regulate cell fate and totipotency. RESULTS: RNA-seq of 48 samples (12 developmental stages × 4 biological replicates) generated 90 million high quality reads per sample, approximately 74% of which were uniquely mapped to the Arabica genome. First, the statistical analysis of transcript data clearly grouped SE developmental stages into seven important phases (Leaf, Dedifferentiation, Primary callus, Embryogenic callus, Embryogenic cell clusters, Redifferentiation and Embryo) enabling the identification of six key developmental phase switches, which are strategic for the overall biological efficiency of embryo regeneration. Differential gene expression and functional analysis showed that genes encoding transcription factors, stress-related genes, metabolism-related genes and hormone signaling-related genes were significantly enriched. Second, the standard environmental drivers used to control SE, i.e. light, growth regulators and cell density, were clearly perceived at the molecular level at different developmental stages. Third, expression profiles of auxin-related genes, transcription factor-related genes and secondary metabolism-related genes were analyzed during SE. Gene co-expression networks were also inferred. Auxin-related genes were upregulated during dedifferentiation and redifferentiation while transcription factor-related genes were switched on from the embryogenic callus and onward. Secondary metabolism-related genes were switched off during dedifferentiation and switched back on at the onset of redifferentiation. Secondary metabolites and endogenous IAA content were tightly linked with their respective gene expression. Lastly, comparing Arabica embryogenic and non-embryogenic cell transcriptomes enabled the identification of biological processes involved in the acquisition of embryogenic capacity. CONCLUSIONS: The present analysis showed that transcript fingerprints are discriminating signatures of cell fate and are under the direct influence of environmental drivers. A total of 23 molecular candidates were successfully identified overall the 12 developmental stages and can be tested in many plant species to optimize SE protocols in a rational way.

Starmaya: The First Arabica F1 Coffee Hybrid Produced Using Genetic Male Sterility.

In the present paper, we evaluated the implementation of a seed production system based on the exploitation of male sterility on coffee. We studied specifically the combination between CIR-SM01 and Marsellesa® (a Sarchimor line), which provides a hybrid population called Starmaya. We demonstrated that the establishment of seed garden under natural pollination is possible and produces a sufficient amount of hybrid seeds to be multiplied efficiently and economically. As expected for F1 hybrid, the performances of Starmaya are highly superior to conventional cultivars. However, we observed some heterogeneity on Starmaya cultivar in the field. We confirmed by genetic marker analysis that the off-types were partly related to the heterozygosity of the CIR-SM01 clone and could not be modified. Regarding the level of rust resistance of Starmaya cv., we saw that it could be improved if Marsellesa was more fully fixed genetically. If so, we should be able to decrease significantly the percentage of rust incidence of Starmaya from 15 to 5%, which would be quite acceptable at a commercial level. Starmaya represents the proof of concept for the mass propagation of Arabica F1 hybrid seeds using male sterility. Finally, we discuss the possibility to increase the number of hybrid varieties produced by seed, exploring some initiatives to identify male sterility markers to induce male sterility on any conventional cultivar. This would definitively open up the universe of known Arabica cultivars to be used in breeding new F1 hybrids.

Unravelling the Metabolic and Hormonal Machinery During Key Steps of Somatic Embryogenesis: A Case Study in Coffee.

Somatic embryogenesis (SE) is one of the most promising processes for large-scale dissemination of elite varieties. However, for many plant species, optimizing SE protocols still relies on a trial-and-error approach. Using coffee as a model plant, we report here the first global analysis of metabolome and hormone dynamics aiming to unravel mechanisms regulating cell fate and totipotency. Sampling from leaf explant dedifferentiation until embryo development covered 15 key stages. An in-depth statistical analysis performed on 104 metabolites revealed that massive re-configuration of metabolic pathways induced SE. During initial dedifferentiation, a sharp decrease in phenolic compounds and caffeine levels was also observed while auxins, cytokinins and ethylene levels were at their highest. Totipotency reached its highest expression during the callus stages when a shut-off in hormonal and metabolic pathways related to sugar and energetic substance hydrolysis was evidenced. Abscisic acid, leucine, maltotriose, myo-inositol, proline, tricarboxylic acid cycle metabolites and zeatin appeared as key metabolic markers of the embryogenic capacity. Combining metabolomics with multiphoton microscopy led to the identification of chlorogenic acids as markers of embryo redifferentiation. The present analysis shows that metabolite fingerprints are signatures of cell fate and represent a starting point for optimizing SE protocols in a rational way.

Coffee Somatic Embryogenesis: How Did Research, Experience Gained and Innovations Promote the Commercial Propagation of Elite Clones From the Two Cultivated Species?

Since the 1990s, somatic embryogenesis (SE) has enabled the propagation of selected varieties, Arabica F1 hybrid and Robusta clones, originating from the two cultivated coffee species, Coffea arabica and Coffea canephora, respectively. This paper shows how mostly empirical research has led to successful industrial transfers launched in the 2000s in Latin America, Africa, and Asia. Coffee SE can be considered as a model for other woody perennial crops for the following reasons: (i) a high biological efficiency has been demonstrated for propagated varieties at all developmental stages, and (ii) somaclonal variation is understood and mastered thanks to intensive research combining molecular markers and field observations. Coffee SE is also a useful model given the strong economic constraints that are specific to this species. In brief, SE faced four difficulties: (i) the high cost of SE derived plants compared to the cost of seedlings of conventional varieties, (ii) the logistic problems involved in reaching small-scale coffee growers, (iii) the need for certification, and (iv) the lack of solvency among small-scale producers. Nursery activities were professionalized by introducing varietal certification, quality control with regard to horticultural problems and somaclonal variation, and sanitary control for Xylella fastidiosa. In addition, different technology transfers were made to ensure worldwide dissemination of improved F1 Arabica hybrids and Robusta clones. Innovations have been decisive for successful scaling-up and reduction of production costs, such as the development of temporary immersion bioreactors for the mass production of pre-germinated embryos, their direct sowing on horticultural soil, and the propagation of rejuvenated SE plants by rooted mini-cuttings. Today, SE is a powerful tool that is widely used in coffee for biotechnological applications including propagation and genetic transformation. Basic research has recently started taking advantage of optimized SE protocols. Based on -omics methodologies, research aims to decipher the molecular events involved in the key developmental switches of coffee SE. In parallel, a high-throughput screening of active molecules on SE appears to be a promising tool to speed-up the optimization of SE protocols.

Development of coffee somatic and zygotic embryos to plants differs in the morphological, histochemical and hydration aspects.

In Coffea arabica L., the development of direct sowing of somatic embryos (SE) in planting substrate, with subsequent nursery production of plants, has promoted the industrialization of somatic embryogenesis. However, plant conversion rates are still low and require improvements to enhance the cost-effectiveness of commercial micropropagation. With the aim of improving plant regeneration from SE, we studied the morphological and histological criteria and water characteristics during germination and plant conversion of zygotic embryos (ZE) and SE. At the cotyledonary stage, SE produced in a 1 l RITA(®) temporary immersion bioreactor (area 55.8 cm(2)) were morphologically similar in size (2-3 mm) but abnormal as compared with mature ZE. Protein and starch reserve levels were extremely low throughout germination and conversion to plantlets, while the water status remained steady [water content (WC) from 76 to 87%, Ψ from -0.37 to -0.47 MPa, pressure potential from 0.69 to 0.24 MPa]. In ZE, spectacular hydration occurred during the first 3 weeks (WC from 37 to 75%; Ψ from -6.24 to -1.0 MPa). Cotyledons remained undifferentiated for 10 weeks after sowing. Conversely, after only 3 weeks under germination conditions in a RITA(®) bioreactor, spongy and palisade parenchyma and stomata formed in SE cotyledons. The ZE plant conversion was faster than that of SE (14 vs. 22 weeks) and more efficient (rates 96 vs. 55%), with much more substantial hypocotyl and cotyledon development. The use of a new 5 l MATIS(®) bioreactor (area 355 cm(2)), designed especially to favor embryo dispersion and light transmittance to SE, markedly improved the embryo-to-plantlet conversion rate (91%). These results highlight the morphological heterogeneity and lack of protein reserves in SE at the beginning of the germination phase and marked differences in water characteristics. However, they also reveal high phenotypic plasticity, leading to a highly efficient plantlet conversion rate due to better embryo dispersion and light transmittance in more horizontal bioreactors.

High genetic and epigenetic stability in Coffea arabica plants derived from embryogenic suspensions and secondary embryogenesis as revealed by AFLP, MSAP and the phenotypic variation rate.

Embryogenic suspensions that involve extensive cell division are risky in respect to genome and epigenome instability. Elevated frequencies of somaclonal variation in embryogenic suspension-derived plants were reported in many species, including coffee. This problem could be overcome by using culture conditions that allow moderate cell proliferation. In view of true-to-type large-scale propagation of C. arabica hybrids, suspension protocols based on low 2,4-D concentrations and short proliferation periods were developed. As mechanisms leading to somaclonal variation are often complex, the phenotypic, genetic and epigenetic changes were jointly assessed so as to accurately evaluate the conformity of suspension-derived plants. The effects of embryogenic suspensions and secondary embryogenesis, used as proliferation systems, on the genetic conformity of somatic embryogenesis-derived plants (emblings) were assessed in two hybrids. When applied over a 6 month period, both systems ensured very low somaclonal variation rates, as observed through massive phenotypic observations in field plots (0.74% from 200,000 plant). Molecular AFLP and MSAP analyses performed on 145 three year-old emblings showed that polymorphism between mother plants and emblings was extremely low, i.e. ranges of 0-0.003% and 0.07-0.18% respectively, with no significant difference between the proliferation systems for the two hybrids. No embling was found to cumulate more than three methylation polymorphisms. No relation was established between the variant phenotype (27 variants studied) and a particular MSAP pattern. Chromosome counting showed that 7 of the 11 variant emblings analyzed were characterized by the loss of 1-3 chromosomes. This work showed that both embryogenic suspensions and secondary embryogenesis are reliable for true-to-type propagation of elite material. Molecular analyses revealed that genetic and epigenetic alterations are particularly limited during coffee somatic embryogenesis. The main change in most of the rare phenotypic variants was aneuploidy, indicating that mitotic aberrations play a major role in somaclonal variation in coffee.

Morpho-histological study of banana (Musa spp. cv. Grande Naine [AAA]) cell suspensions during cryopreservation and regeneration.

In this work, a morpho-histological study of banana (Musa spp. cv. Grande Naine [AAA]) embryogenic cell suspensions during cryopreservation and regeneration was performed. It was demonstrated that the regeneration process of somatic embryos originating from cryopreserved cell suspensions was different from that of control cell suspensions. Somatic embryos originating from cryopreserved cell suspensions had a unicellular origin. The regeneration process was modified not only by freezing in liquid nitrogen but also by the plasmolyzing effect of the 0.5 M sucrose solution employed during pretreatment. This result explained the high number of embryonic structures formed on M3 medium, compared with the control. Proembryos blocked at the globular stage could pursue their development when they were plated on new culture medium at a lower density after 30 days of culture on M3 medium. The unicellular origin of somatic embryos produced from cryopreserved cell suspensions offers the prospect of using cryopreservation to select non-chimeral transformed plants.