RESUMO
A vehicle influences the concentration of penetrant within the membrane, affecting its diffusivity in the skin and rate of transport. Despite the huge amount of effort made for the understanding and modelling of the skin absorption of chemicals, a reliable estimation of the skin penetration potential from formulations remains a challenging objective. In this investigation, quantitative structure-activity relationship (QSAR) was employed to relate the skin permeation of compounds to the chemical properties of the mixture ingredients and the molecular structures of the penetrants. The skin permeability dataset consisted of permeability coefficients of 12 different penetrants each blended in 24 different solvent mixtures measured from finite-dose diffusion cell studies using porcine skin. Stepwise regression analysis resulted in a QSAR employing two penetrant descriptors and one solvent property. The penetrant descriptors were octanol/water partition coefficient, logP and the ninth order path molecular connectivity index, and the solvent property was the difference between boiling and melting points. The negative relationship between skin permeability coefficient and logP was attributed to the fact that most of the drugs in this particular dataset are extremely lipophilic in comparison with the compounds in the common skin permeability datasets used in QSAR. The findings show that compounds formulated in vehicles with small boiling and melting point gaps will be expected to have higher permeation through skin. The QSAR was validated internally, using a leave-many-out procedure, giving a mean absolute error of 0.396. The chemical space of the dataset was compared with that of the known skin permeability datasets and gaps were identified for future skin permeability measurements.
Assuntos
Preparações Farmacêuticas/administração & dosagem , Preparações Farmacêuticas/metabolismo , Relação Quantitativa Estrutura-Atividade , Absorção Cutânea/fisiologia , Administração Cutânea , Animais , Permeabilidade/efeitos dos fármacos , Absorção Cutânea/efeitos dos fármacos , SuínosRESUMO
A prospective survey of pharmacists' tasks and patients' knowledge and satisfaction was conducted in 35 randomly selected community pharmacies in Tabriz, Islamic Republic of Iran. The total pharmacist interaction received a mean score of 3.05 out of 5. Providing written directions for use attained the highest score of 0.98 out of 1. Patients scored 3.18 out of 5 for knowledge about their medicines. There was a close correlation between patients' knowledge of dispensed drugs and pharmacist interaction (r = 0.95). Mean total prescription filling time was 7.6 min, but only 1.4 min was spent on pharmacist-patient counselling. The interaction between pharmacist and patient increases patients' knowledge about dispensed medicines and their satisfaction with the pharmacist's activities.
Assuntos
Serviços Comunitários de Farmácia/organização & administração , Educação de Pacientes como Assunto/organização & administração , Satisfação do Paciente , Farmacêuticos , Papel Profissional , Relações Profissional-Paciente , Comunicação , Rotulagem de Medicamentos , Prescrições de Medicamentos , Avaliação Educacional , Humanos , Irã (Geográfico) , Modelos Lineares , Anamnese , Satisfação do Paciente/estatística & dados numéricos , Farmacêuticos/organização & administração , Farmacêuticos/psicologia , Papel Profissional/psicologia , Estudos Prospectivos , Qualidade da Assistência à Saúde , Estudos de Tempo e MovimentoRESUMO
Deviations of the predicted solubilities using the Jouyban-Acree model from experimental data were correlated to the structural descritptors of the drugs computed by HyperChem software. The proposed models are able to predict the solubility in water-cosolvent mixtures and reduced the mean percentage deviations (MPD) of predicted solubilities from 24%, 48%, and 53% to 16%, 33% and 38%, respectively for water-propylene glycol, water-ethanol and water-polyethylene glycol 400 mixtures, with the overall improvement in prediction capability of the model being approximately 13%.
Assuntos
Química Farmacêutica/estatística & dados numéricos , Preparações Farmacêuticas/química , Algoritmos , Simulação por Computador , Interpretação Estatística de Dados , Etanol , Modelos Químicos , Modelos Estatísticos , Polietilenoglicóis , Software , Solubilidade , Solventes , ÁguaRESUMO
Terpenes and sesquiterpenes have been suggested as promising non-toxic, non-irritating transdermal penetration enhancers. This investigation aimed to study the effect of terpene concentration on the transdermal absorption of diclofenac sodium from ethanol:glycerin:phosphate buffer solution (60:10:30). Therefore, enhancing effects of various terpenes (menthone, limonenoxide, carvone, nerolidol and farnsol) with different concentrations (0.25, 0.5, 1, 1.5 and 2.5%, v/v) on the permeation of diclofenac sodium were evaluated using Franz diffusion cells fitted with rat skin. Furthermore, solubility of diclofenac sodium in the vehicle in presence of different concentrations of terpenes was determined. The results showed that despite the negligible effect of terpenes on the drug solubility, there was a profound skin penetration enhancement effect, although the terpene enhancers varied in their ability to enhance the flux of diclofenac sodium. The results showed that at the highest concentration of terpene (2.5%, v/v) the rank order of enhancement effect for diclofenac sodium was nerolidol>farnesol>carvone>methone>limonenoxide, whereas at the low concentration of 0.25% the rank order was farnesol>carvone>nerolidol>menthone>limonenoxide. No direct relationship existed between terpene concentration and the permeation rate. The most outstanding penetration enhancer was nerolidol, providing an almost 198-fold increase in permeability coefficient of diclofenac sodium, followed by farnesol with a 78-fold increase.
Assuntos
Anti-Inflamatórios não Esteroides/metabolismo , Diclofenaco/metabolismo , Absorção Cutânea/efeitos dos fármacos , Pele/efeitos dos fármacos , Terpenos/farmacologia , Administração Cutânea , Animais , Anti-Inflamatórios não Esteroides/administração & dosagem , Anti-Inflamatórios não Esteroides/química , Química Farmacêutica , Monoterpenos Cicloexânicos , Diclofenaco/administração & dosagem , Diclofenaco/química , Difusão/efeitos dos fármacos , Cultura em Câmaras de Difusão , Relação Dose-Resposta a Droga , Etanol/química , Farneseno Álcool/farmacologia , Glicerol/química , Masculino , Mentol/farmacologia , Estrutura Molecular , Monoterpenos/farmacologia , Técnicas de Cultura de Órgãos , Permeabilidade/efeitos dos fármacos , Ratos , Ratos Wistar , Sesquiterpenos/farmacologia , Pele/metabolismo , Solubilidade , Solventes/química , Terpenos/químicaRESUMO
Many oestrogenic chemicals exert their activity via specific interactions with the oestrogen receptor (ER). The objective of the present study was to identify significant descriptors associated with the ER binding affinities of a large and diverse set of compounds to drive quantitative structure-activity relationships (QSARs). To this end, a variety of statistical methods were employed for variable selection. These included stepwise regression and partial least squares (PLS) analyses, as well as a non-linear recursive partitioning method (Formal Inference-based Recursive Modelling). A total of 157 molecular descriptors including quantum mechanical, graph theoretical, indicator variables and log P were used in the study. Furthermore, cluster analysis of variables was performed to identify groups of descriptors representing similar molecular features. Hierarchical PLS analyses were performed, where the scores of the significant components of either PLS or principle component analysis (PCA), performed separately on each cluster, were used as the variables for the top model. This reduced the number of the variables representing the larger clusters, leading to a similar number of descriptors for each distinct molecular feature. The results showed that the most important molecular properties for stronger ER binding affinity are molecular size and shape, the presence of a phenol moiety as well as other aromatic groups, hydrophobicity and presence of double bonds. The best PLS model obtained, in terms of predictive ability, was a hierarchical PLS model. However, a rigorous validation study showed that the MLR model using descriptors selected by stepwise regression has greater predictive power than the PLS models.
Assuntos
Poluentes Ambientais/metabolismo , Estrogênios/metabolismo , Modelos Biológicos , Receptores de Estrogênio/metabolismo , Análise por Conglomerados , Análise dos Mínimos Quadrados , Estrutura Molecular , Análise de Componente Principal , Relação Quantitativa Estrutura-Atividade , Reprodutibilidade dos TestesRESUMO
Lorazepam is an anxiolytic, antidepressant agent, having suitable feature for transdermal delivery. The percutaneous permeation of lorazepam was investigated in rat skin after application of a water:propylene glycol (50:50%v/v). The enhancing effects of various surfactants (sodium lauryl sulfate (SLS), cetyltrimethylammonium bromide (CTAB), benzalkonium chloride or Tween 80) with different concentrations on the permeation of lorazepam were evaluated using Franz diffusion cells fitted with rat skins. Flux, K(p), lag time and enhancement ratios (ERs) of lorazepam were measured over 24 h and compared with control sample. Furthermore, lorazepam solubility in presence of surfactants was determined. The in vitro permeation experiments with rat skin revealed that the surfactant enhancers varied in their ability to enhance the flux of lorazepam. The permeation profile of lorazepam in presence of the cationic surfactant, CTAB, reveals that an increase in the concentration of CTAB results in an increase in the flux of lorazepam in comparison with the control. But an increase in concentration of CTAB or benzalkounium chloride from 0.5 to 1% w/w or from 1 to 2.5% w/w resulted in a reduction in ER, respectively. Benzalkonium chloride which possessed the highest lipophilicity (logP=1.9) among cationic surfactants provided the greatest enhancement for lorazepam flux (7.66-fold over control) at 1% w/w of the surfactant. CTAB (logP<1) and sodium lauryl sulphate at a concentration of 5% w/w (the highest concentration) exhibited the greatest increase in flux of lorazepam compared with control (9.82 and 11.30-fold, respectively, over control). This is attributed to the damaging effect of the cationic and anionic surfactants on the skin at higher concentration. The results also showed that the highest ER was obtained in presence of 1% w/w surfactant with the exception of SLS and CTAB. The increase in flux at low enhancer concentrations is normally attributed to the ability of the surfactant molecules to penetrate the skin and increase its permeability. Reduction in the rate of transport of the drug present in enhancer systems beyond 1% w/w is attributed to the ability of the surfactant molecules to form micelles and is normally observed only if interaction between micelle and the drug occurs.
Assuntos
Lorazepam/farmacologia , Absorção Cutânea/efeitos dos fármacos , Tensoativos/farmacologia , Animais , Sinergismo Farmacológico , Lorazepam/química , Masculino , Ratos , Ratos Wistar , Absorção Cutânea/fisiologia , Solubilidade , Tensoativos/químicaRESUMO
The influence of glycyrrhizin extracted from Glycyrrhiza glabra var. glandulifera (licorice roots) on the percutaneous absorption of diclofenac sodium from sodium carboxymethylcellulose (NaCMC) gels or oil-in-water (o/w) emulsion was investigated. Skin permeation experiments were carried out using excised abdominal rat skin. The results showed that the efficiency of glycyrrhizin as an enhancer agent is greater in gel formulations than it is in the emulsions. The enhancer with the concentration of 0.1% w/w in gel increased diclofenac sodium flux value to tenfold compared with the control gel.
Assuntos
Anti-Inflamatórios não Esteroides/farmacocinética , Diclofenaco/farmacocinética , Ácido Glicirrízico/farmacologia , Absorção Cutânea/efeitos dos fármacos , Administração Tópica , Algoritmos , Animais , Anti-Inflamatórios não Esteroides/administração & dosagem , Cromatografia Líquida de Alta Pressão , Diálise , Diclofenaco/administração & dosagem , Emulsões , Excipientes , Géis , Masculino , Ratos , Espectrofotometria UltravioletaRESUMO
The solubility of four benzodiazepines (BZPs) including diazepam (DIZ), lorazepam (LRZ) clonazepam (CLZ), and chlordiazepoxide (CHZ) in water-cosolvent (ethanol propylene glycol and polyethylene glycol 200) binary systems were studied. In general, increasing the volume fraction of cosolvents resulted in an increase in the solubility of benzodiazepines. The mole fraction solubilities were fitted to the various cosolvency models, namely extended Hildebrand approach (EHA), excess free energy (EFE), combined nearly ideal binary solvent/Redlich-Kister (CNIBS/R-K), general single model (GSM), mixture response surface (MR-S). double log-log (DL-L), and linear double log-log (LDL-L). The results showed that DL-L model was the best model in predicting the solubility of all drugs in all the water-cosolvent mixtures (OAE% = 4.71). The minimum and maximum errors were observed for benzodiazepine's solubility in water-propylene glycol and water-ethanol mixtures which were 2.67 and 11.78%, respectively. Three models (EFE, CNIBS/R-K and LDL-L) were chosen as general models for solubility descriptions of these structurally similar drugs in each of the solvent systems. Among these models, the EFE model was the best in predicting the solubility of benzodiazepines in binary solvent mixtures (OAE% = 11.19).
Assuntos
Benzodiazepinas/química , Modelos Químicos , Ansiolíticos/química , Clordiazepóxido/química , Clonazepam/química , Diazepam/química , Lorazepam/química , Valor Preditivo dos Testes , Solubilidade , Solventes/químicaRESUMO
Aldehyde oxidase is a molybdenum-containing enzyme distributed throughout the animal kingdom. Although this enzyme is capable of metabolizing a wide range of aldehydes and N-heterocyclic compounds, there is no reported detailed study of physicochemical requirements of the enzyme-substrate interactions. The aim of this study, therefore, was to investigate quantitatively the relationships between the kinetic constants of aldehyde oxidase-catalyzed oxidation of some phthalazine and quinazoline derivatives (as substrates) and their structural parameters. Multiple regression and stepwise regression analyses showed that polarity of phthalazines (expressed as dipole moment mu, cohesive energy density deltaT and an indicator variable for hydrogen-bond acceptor ability of R1 substituent, HBA) had a negative effect on the enzyme activity (leading to the reduction of Vmax and increase of Km). Electron withdrawing substituents in the quinazoline series are favorable for interaction with the enzyme. This finding and also the relationships of 1/Km of phthalazines with the energy of the lowest unoccupied molecular orbital and log Vmax/log Km of phthalazines with degree of bonding of the two nitrogen atoms in the molecules are consistent with the mechanism of action. The reaction involves a nucleophilic attack on an electron-deficient sp2-hybridized carbon atom and formation of an epoxide intermediate following the disruption of the aromatic structure.
Assuntos
Aldeído Oxirredutases/antagonistas & inibidores , Inibidores Enzimáticos/química , Inibidores Enzimáticos/farmacologia , Fígado/enzimologia , Ftalazinas/química , Ftalazinas/farmacologia , Quinazolinas/química , Quinazolinas/farmacologia , Algoritmos , Humanos , Cinética , Fígado/efeitos dos fármacos , Oxirredução , Relação Quantitativa Estrutura-AtividadeRESUMO
The percutaneous permeation of diazepam was investigated in rat skin after application of a water-propylene glycol (50:50% v/v) using a diffusion cell technique. The effect of various surfactants (sodium lauryl sulfate (SLS), cetyltrimethylammonium bromide (CTAB), benzalkonium chloride or Tween 80) with different concentrations on skin permeability were evaluated. Flux, K(p), lag time and enhancement ratios (ERs) of diazepam were measured over 10 h and compared with control sample (containing no surfactant). Furthermore, diazepam solubility in presence of surfactants was determined. The in vitro permeation experiments with rat skin revealed that the surfactant enhancers varied in their ability to enhance the flux of diazepam. Benzalkonium chloride which possessed the highest lipophilicity (logP=1.9) among cationic surfactants provided the greatest enhancement for diazepam flux (7.98-fold over control). CTAB (logP<1) at a concentration of 1% w/w exhibited no significant increase in flux of diazepam compared to control (1.16-fold over control). The results also showed that the highest ER was obtained in presence of 1% w/w surfactant with the exception of SLS and CTAB. The increase in flux at low enhancer concentrations is normally attributed to the ability of the surfactant molecules to penetrate the skin and increase its permeability. Reduction in the rate of transport of the drug present in enhancer systems beyond 1% w/w is attributed to the ability of the surfactant to form micelles and is normally observed only if interaction between micelle and the drug occurs. The results showed that the nature of enhancer greatly influences cutaneous barrier impairment.
Assuntos
Diazepam/farmacocinética , Moduladores GABAérgicos/farmacocinética , Absorção Cutânea/efeitos dos fármacos , Tensoativos/farmacologia , Administração Cutânea , Algoritmos , Animais , Diazepam/administração & dosagem , Difusão , Excipientes , Moduladores GABAérgicos/administração & dosagem , Técnicas In Vitro , Indicadores e Reagentes , Propilenoglicóis , Ratos , Ratos Wistar , SolubilidadeRESUMO
The permeability coefficients (log kp) of solutes through stratum corneum have been previously related to the octanol-water partition coefficients (log Poct) and solvatochromic parameters. In this study, permeation coefficient data are related to the theoretical chemistry-derived structural parameters and also molecular connectivity and molecular shape indices. The results show that these parameters are comparable with the solvatochromic parameters in correlation with log kp. Log Poct can be corrected by the theoretical parameters to explain permeation coefficients and the equilibrium distribution of compounds between the stratum corneum and water (log Km). Diffusion estimated from the expression log(D/h)=log kp-log Km, where D is the diffusion coefficient and h is the path length for diffusion was also analyzed successfully by the structural parameters.
Assuntos
Álcoois/química , Modelos Químicos , Relação Quantitativa Estrutura-Atividade , Absorção Cutânea , Esteroides/química , Álcoois/farmacocinética , Cortisona/química , Cortisona/farmacocinética , Epiderme/metabolismo , Etisterona/química , Etisterona/farmacocinética , Ligação de Hidrogênio , Permeabilidade , Progesterona/química , Progesterona/farmacocinética , Absorção Cutânea/fisiologia , Esteroides/farmacocinéticaRESUMO
Hydrogen-bonding, important in drug-receptor interactions, also determines the solubility and partitioning of drugs between phases. It is, therefore, important to incorporate the effects of hydrogen-bonding in studies of quantitative structure-activity relationships (QSAR). In this study the atomic charge on the most positively charged hydrogen atom in a molecule and the energy of the lowest unoccupied molecular orbital (LUMO) have been used as a measure of hydrogen-bond-donor capacity. For several hydrogen-bonding acids the Mulliken atomic charges and the energy of the LUMO produced by use of three semiempirical methods, AM1, PM3 and MNDO, and MNDO electrostatic-potential-derived atomic charges, have been compared in correlations with solvatochromic hydrogen-bonding acidity (sigmaalpha(H)2). Atomic charges and LUMO energies, particularly those calculated by use of the AM1 and MNDO methods, were found to correlate well with sigmaalpha(H)2. They were also found to be good models of hydrogen-bonding in QSAR correlations.