Can sterilization of disposable face masks be an alternative for imported face masks? A nationwide field study including 19 sterilization departments and 471 imported brand types during COVID-19 shortages.

BACKGROUND: Face masks, also referred to as half masks, are essential to protect healthcare professionals working in close contact with patients with COVID-19-related symptoms. Because of the Corona material shortages, healthcare institutions sought an approach to reuse face masks or to purchase new, imported masks. The filter quality of these masks remained unclear. Therefore, the aim of this study was to assess the quality of sterilized and imported FFP2/KN95 face masks. METHODS: A 48-minute steam sterilization process of single-use FFP2/KN95 face masks with a 15 minute holding time at 121°C was developed, validated and implemented in the Central Sterilization Departments (CSSD) of 19 different hospitals. Masks sterilized by steam and H2O2 plasma as well as new, imported masks were tested for particle filtration efficiency (PFE) and pressure drop in a custom-made test setup. RESULTS: The results of 84 masks tested on the PFE dry particle test setup showed differences of 2.3±2% (mean±SD). Test data showed that the mean PFE values of 444 sterilized FFP2 face masks from the 19 CSSDs were 90±11% (mean±SD), and those of 474 new, imported KN95/FFP2 face masks were 83±16% (mean±SD). Differences in PFE of masks received from different sterilization departments were found. CONCLUSION: Face masks can be reprocessed with 121 °C steam or H2O2 plasma sterilization with a minimal reduction in PFE. PFE comparison between filter material of sterilized masks and new, imported masks indicates that the filter material of most reprocessed masks of high quality brands can outperform new, imported face masks of unknown brands. Although the PFE of tested face masks from different sterilization departments remained efficient, using different types of sterilization equipment, can result in different PFE outcomes.

Polarization-dependent differential reflectance spectroscopy for real-time monitoring of organic thin film growth.

By monitoring the reflectance of a sample surface during deposition of a thin organic film, one can obtain information with submonolayer resolution in real-time. A special kind of optical spectroscopy is Differential Reflectance Spectroscopy (DRS), which compares the reflectance before and during deposition of a thin film or any other change of the surface optical properties. In this work, we present an extended DRS setup that allows monitoring simultaneously both linear polarization states (s and p) of the reflected light. We implement polarization-dependent DRS to monitor the growth of perflouropentacene thin films on a Ag(110) single crystal. The setup allows us to deduce the optical anisotropy of the sample and, in particular, the preferred orientation of the molecules on the surface.