Study of diffusionless and diffusional transformations using in situ cooling and heating techniques in a scanning electron microscope.

In situ electron microscopy can be an effective tool to investigate the underlying science of many transformation mechanisms in materials science. Useful utilization of these experimentations will provide greater insight into many of the existing theories, as microstructural changes can be visualized in real time under some applied constraints. In this study, we have investigated two basic phase transformation phenomena: diffusionless and diffusional mechanisms with the help of in situ cooling and heating techniques in scanning electron microscope (SEM). In situ cooling experiments have been carried out on secondary hardening ultra-high-strength steels to understand the diffusionless transformation of austenite to martensite. Nucleation and growth of the martensites have been observed with cooling in different steps to -194°C. Details of the formation of different variants of martensites in steel were studied with the help of orientation imaging microscopy. Diffusional transformations were studied in terms of oxidation of pure copper in SEM using in situ heating technique. Different heating cycles were adopted for different samples by in situ heating to a maximum temperature of 950°C for the oxidation study. Nucleation of copper oxides and subsequent growth of the copper oxides at different temperatures were studied systematically. Raman spectroscopy and orientation imaging were done to confirm the formation of oxides and their orientations. The thermal cycling phenomenon was replicated inside SEM with heating and cooling and it has been demonstrated how the nature of copper and its oxides changes with the thermal cycle. This article is part of a discussion meeting issue 'Dynamic in situ microscopy relating structure and function'.

Microstructural Characterization by Automated Crystal Orientation and Phase Mapping by Precession Electron Diffraction in TEM: Application to Hot Deformation of a γ-TiAl-based Alloy.

Microstructural evolution of a hot deformed γ-TiAl-based Ti-45Al-8Nb-2Cr-0.2B (at.%) alloy has been studied using an advanced characterization technique called automated crystal orientation and phase mapping by precession electron diffraction carried out in a transmission electron microscope (with a NanoMEGAS attachment). It has been observed that the technique, having a capability to recognize diffraction patterns with improved accuracy and reliability, is particularly suitable for characterization of complex microstructural features evolved during hot deformation of multiphase (α2 + γ + ß)-based TiAl alloys. Examples of coupled orientations and phase maps of the present alloy demonstrate that the accurate reproduction of the very fine lamellar structure (α2 + γ + γ) is feasible due to its inherent high-spatial resolution and absence of a pseudo-symmetry effect. It enables identification of salient features of γ-TiAl deformation behavior in terms of misorientation analyses (GAM, GOS, and KAM) and transformation characteristics of very fine lamellar constituent phases. Apart from conventional strain analyses from the orientation database, an attempt has been made to image the dislocation sub-structure of γ-phases, which supplements the deformation structure evaluation using this new technique.

Enhanced photocatalytic and antibacterial activity of plasma-reduced silver nanoparticles.

A non-thermal atmospheric pressure plasma jet has been used for the green synthesis of highly dispersed colloidal silver nanoparticles. The reducing species such as hydrogen radicals and hydrated electrons are identified, and the change in the solution pH is studied during AgNP formation. The structural properties and size of the plasma-reduced silver nanoparticles are characterized via X-ray diffraction, ultraviolet-visible spectroscopy, fluorescence spectroscopy and transmission electron microscopy. The size of the colloidal AgNPs is tuned by adjusting the initial concentration of AgNO3. The effect of terephthalic acid, a hydroxyl radical scavenger, on the reduction of Ag+ ion is studied. The typical catalytic activity data indicate the better performance of the plasma-reduced colloidal Ag nanoparticles than that obtained from the chemical reduction method. The antibacterial activity of the plasma-reduced Ag nanoparticles also shows a better performance than that of the chemically reduced AgNPs, highlighting the potential of the plasma reduction approach for the synthesis of metal nanoparticles, which are stable even after 30 days without a stabilizing agent. Additionally, the effects of hydroxyl scavengers (isopropyl alcohol) and Fenton's reagent (Fe2+ salt) on CV degradation are studied.

Effects of chemotherapy agents on Sphingosine-1-Phosphate receptors expression in MCF-7 mammary cancer cells.

Sphingosine-1-phosphate (S1P) is a potent bioactive sphingolipid involved in the regulation of cell proliferation and cancer progression. Increased expression of S1P receptors has been detected in advanced breast tumours with poor prognosis suggesting that S1P receptors might control tumour response to chemotherapy. However, it remains unclear how the levels of S1P receptor expression are influenced by chemotherapy agents. Western immunoblotting, PCR analysis and fluorescent microscopy techniques were used in this study to analyze expression patterns of S1P receptors 2 and 3 (S1P2/S1P3) in MCF-7 breast adenocarcinoma cells treated by Tamoxifen (TAM) and/or Medroxyprogesterone acetate (MPA). We found that TAM/MPA induce downregulation of S1P3 receptors, but stimulate expression of S1P2. According to cell viability and caspase activity analyses, as expected, TAM activated apoptosis. We also detected TAM/MPA-induced autophagy marked by formation of macroautophagosomes and increased level of Beclin 1. Combined application of TAM and MPA resulted in synergistic apoptosis- and autophagy-stimulating effects. Assessed by fluorescent microscopy with autophagosome marker LAMP-2, changes in S1P receptor expression coincided with activation of autophagy, suggestively, directing breast cancer cells towards death. Further studies are warranted to explore the utility of manipulation of S1P2 and S1P3 receptor expression as a novel treatment approach.

Changes in organic - C, N, P and K and enzyme activities in vermicompost of biodegradable organic wastes under liming and microbial inoculants.

The aim of this work was to study the effect of different organic wastes, viz. cow dung, grass, aquatic weeds and municipal solid waste with lime and microbial inoculants on chemical and biochemical properties of vermicompost. Cow dung was the best substrate for vermicomposting. Application of lime (5 g/kg) and inoculation of microorganisms increased the nutrient content in vermicompost and also phosphatases and urease activities. Bacillus polymyxa, the free-living N-fixer, increased N-content of vermicompost significantly (p < or = 0.01) as compared to other inoculants.

Theory of diffraction from D019 ordered c.p.h structures containing complex stacking faults on basal planes.

Antiphase boundaries and stacking faults affect the deformation behaviour of intermetallics. In an ordered c.p.h. (close-packed hexagonal) structure of D0(19) type (e.g. Mg(3)Cd, Ti(3)Al-based alloys), stable planar faults of two types are possible on the basal plane. These are antiphase boundaries (APBs) and complex stacking faults (CSFs), which are a combination of an APB and a stacking fault. The latter can be either of shear or of climb type. If the bounding partial dislocations of a CSF lie in its plane, then it is designated as a shear CSF, otherwise it is called a climb CSF. A mathematical formulation of the theory of diffraction from a D0(19) structure having a shear or climb type of CSF has been carried out. The diffraction effects owing to the presence of these CSFs have been found. Integrated intensities and widths of the reflections are affected. These have been evaluated in terms of the probability of the occurrence of these faults.

Structural features of a water soluble gum polysaccharide from Murraya paniculata fruits.

A water soluble gum polysaccharide was isolated from Murraya paniculata fruits. Hydrolytic experiments, methylation analysis, periodate oxidation studies and NMR data revealed that the polysaccharide was extensively branched and it consisted of 1,3-, and 1,3,6-linked beta-D-galactopyranosyl units, terminal beta-D-galactopyranosyl units and terminal alpha-D-glucopyranosyl 1,4-beta-D-galactopyranosyl units. Small amounts of 4-O-methylglucuronic acid residues were also present.

Isolation, purification and some structural features of the mucilaginous exudate from Musa paradisiaca.

The water-soluble polysaccharides isolated from the vascular gel of Musa paradisiaca, were fractionated via anion exchange chromatography into four fractions. Fractionated polymers contained arabinose, xylose and galacturonic acid as major sugars, together with traces of galactose, rhamnose, mannose and glucose residues. Methylation analysis revealed the presence of a highly branched arabinoxylan with a significant amount of terminal arabinopyranosyl units and an arabinogalactan type I pectin. Periodate oxidation studies supported the results of methylation analysis.