Exploring the Phenotypic and Genetic Variabilities in Yield and Yield-Related Traits of the Diallel-Crossed F5 Population of Aus Rice.

Rice (Oryza sativa) is a major crop and a main food for a major part of the global population. Rice species have derived from divergent agro-climatic regions, and thus, the local germplasm has a large genetic diversity. This study investigated the relationship between phenotypic and genetic variabilities of yield and yield-associated traits in Aus rice to identify short-duration, high-yielding genotypes. Targeting this issue, a field experiment was carried out to evaluate the performance of 51 Aus rice genotypes, including 50 accessions in F5 generation and one short-duration check variety BINAdhan-19. The genotypes exhibited a large and significant variation in yield and its associated traits, as evidenced by a wide range of their coefficient of variance. The investigated traits, including days to maturity (DM), plant height (PH), panicle length (PL) and 1000-grain weight (TW) exhibited a greater genotypic coefficient of variation than the environmental coefficient of variation. In addition, the high broad-sense heritability of DM, PH, PL and TW traits suggests that the genetic factors significantly influence the observed variations in these traits among the F5 Aus rice accessions. This study also revealed that the grain yield per hill (GY) displayed a significant positive correlation with PL, number of filled grains per panicle (FG) and TW at both genotype and phenotype levels. According to the hierarchical and K-means cluster analyses, the accessions BU-R-ACC-02, BU-R-ACC-08 and R2-36-3-1-1 have shorter DM and relatively higher GY than other Aus rice accessions. These three accessions could be employed in the ongoing and future breeding programs for the improvement of short-duration and high-yielding rice cultivars.

New concept of biodiesel production using food waste digestate powder: Co-culturing algae-activated sludge symbiotic system in low N and P paper mill wastewater.

This paper aims to demonstrate an innovative process for the conversion of food waste digestate (FWD) powder into biofuel. The effects of different doses of FWD are investigated on microalgae-activated sludge (MAS) in treating pulp and paper mill wastewater (PPW) which generally contains insufficient nitrogen and phosphorus. FWD was added to adjust the initial N:P molar ratio in MAS at various levels (8:1 to 15:1). The highest Auxenochlorella protothecoides biomass achieved was 1.67 gL-1 at a 13.45:1 N/P molar ratio of PPW. After 10 days of cultivation, Auxenochlorella protothecoides-activated sludge system removed 91.7 %, 74.6 %, and 91.5 % of total nitrogen, phosphorus, and sCOD respectively at D0.836 gL-1 DD. The highest lipid productivity was reported as 41.27 ± 2.43 mg L-1 day-1. Fatty acid methyl ester (FAME) analysis showed the presence of an appreciable percentage of balanced saturated and unsaturated fatty acids i.e. palmitic, oleic, and linoleic acid, rendering its potential as a feedstock for biodiesel production. Activated sludge induced flocculation of Auxenochlorella protothecoides was measured. The whole process establishes an effective means of circular economy, where the secondary source of recyclable nutrients i.e. FWD will be used as a source of N and P in PPW to obtain algal biodiesel from a negative value industrial wastewater.

An approach for dairy wastewater remediation using mixture of microalgae and biodiesel production for sustainable transportation.

The aim of this work is remediation of dairy wastewater (DWW) for biodiesel feedstock production using poly-microalgae cultures of four microalgae namely Chlorella minutissima (C. minutissima), Scenedesmus abundans (S. abundans), Nostoc muscorum (N. muscorum) and Spirulina sp. The poly-microalgae cultures were prepared as C. minutissima + N. muscorum (CN), C. minutissima + N. muscorum + Spirulina sp. (CNSS) and S. abundans + N. muscorum + Spirulina sp. (SNSS). Poly-microalgae culture CNSS cultivated on 70% DWW achieved 75.16, 61.37, 58.76, 84.48 and 84.58%, removals of biological oxygen demand (BOD), chemical oxygen demand (COD), total nitrogen (TN), total phosphorus (TP), and suspended solids (SS), respectively, at 12:12 h photoperiod that resulted into total biomass and lipid yield of 3.47 ± 0.07 g/L and 496.32± 0.065 mg/L. However, maximum biomass and lipid yields of 5.76 ± 0.06 and 1152.37 ± 0.065 mg/L were achieved by poly-microalgae culture CNSS cultivated on 70% DWW + 10 g/L of glucose at 18:6 h photoperiod. Fatty acid methyl ester (FAME) analysis shown presence of C14:0 (myristic acid) C16:0 (palmitic acid), C16:1 (palmitoleic acid), C18:0 (stearic acid), C18:2 (linoleic acid) and C18:3 (linolenic acid), it indicates that the lipids produced from poly-microalgae cultures are suitable for biodiesel production. Thus, poly-microalgae cultures could be more efficient than mono-microalgae cultures in the remediation of DWW and for biodiesel feedstock production.

Understanding the roles of osmolytes for acclimatizing plants to changing environment: a review of potential mechanism.

Abiotic stresses are significant environmental issues that restrict plant growth, productivity, and survival while also posing a threat to global food production and security. Plants produce compatible solutes known as osmolytes to adapt themselves in such changing environment. Osmolytes contribute to homeostasis maintenance, provide the driving gradient for water uptake, maintain cell turgor by osmotic adjustment, and redox metabolism to remove excess level of reactive oxygen species (ROS) and reestablish the cellular redox balance as well as protect cellular machinery from osmotic stress and oxidative damage. Perceiving the mechanisms how plants interpret environmental signals and transmit them to cellular machinery to activate adaptive responses is important for crop improvement programs to get stress-tolerant varieties. A large number of studies conducted in the last few decades have shown that osmolytes accumulate in plants and have strong associations with abiotic stress tolerance. Production of abundant osmolytes is needed for tolerance in many plant species. In addition, transgenic plants overexpressing genes for different osmolytes showed enhanced tolerance to various abiotic stresses. Many important aspects of their mechanisms of action are yet to be largely identified, especially regarding the relevance and relative contribution of specific osmolytes to the stress tolerance of a given species. Therefore, more efforts and resources should be invested in the study of the abiotic stress responses of plants in their natural habitats. The present review focuses on the possible roles and mechanisms of osmolytes and their association toward abiotic stress tolerance in plants. This review would help the readers in learning more about osmolytes and how they behave in changing environments as well as getting an idea of how this knowledge could be applied to develop stress tolerance in plants.

Effects of various abiotic factors on biomass growth and lipid yield of Chlorella minutissima for sustainable biodiesel production.

In this study, effects of different abiotic factors were studied on biomass and lipid yield of green microalga Chlorella minutissima (C. minutissima) Various concentrations of abiotic factors like nitrogen, phosphorus, glucose, iron, zinc, different values of pH, temperature, light intensity and different photoperiods were observed on the biomass growth and lipid yield of C. minutissima cultivated with modified CHU-13 medium. Initially, three cultivation media namely, Bold's basal medium (BBM), modified CHU-13 and blue-green-11 (BG-11) were used to culture C. minutissima in batch mode. Microalga cultivated with modified CHU-13 medium resulted in maximum biomass and lipid yield of 970 ± 0.21 and 356.63 ± 0.51 mg/L, respectively. To maximize biomass and lipid yield of microalga further, it was cultivated with modified CHU-13 medium and variation of above mentioned abiotic factors was done. Different biomass and lipid yields were achieved for different abiotic factors varied. Highest biomass of 1840.49 ± 0.62 mg/L was achieved with 12 g of glucose containing medium and highest lipid yield of 579.86 ± 0.76 mg/L was achieved with 0.3 g of nitrogen containing medium. GC-MS analysis of biodiesel obtained from C. minutissima biomass cultivated with modified CHU-13 medium shown the presence of C14:0, C16:0, C16:1, C18:0, C18:1, C18:2, C18:3, C20:0, C20:1 and C22:0. Properties of biodiesel obtained from C. minutissima were found in compliance with ASTM-6751-02 and European biodiesel standards EN14214. These results suggest that C. minutissima can be used as a potential biodiesel feedstock for microalgal biodiesel production.

An approach for phycoremediation of different wastewaters and biodiesel production using microalgae.

Four microalgal strains, namely, Tetraselmis indica (T. indica), Scenedesmus abundans (S. abundans), Spirulina sp., and Nostoc muscorum (N. muscorum) were cultivated on four different wastewaters in 1000 ml photobioreactors with 750 ml working volume under 94.5 µmol m-2 s-1 light intensity for 14 days for phycoremediation of wastewaters and sustainable biodiesel production. These microalgal strains attained maximum biomass growth in the secondary treated sewage (STS). Maximum biomass yield (0.6533 g L-1) and lipid productivity (25.44 mg L-1 d-1) for T. indica were achieved in STS. T. indica removed (63.6-78.24%) of nitrate, (60.90-65.97%) of phosphate, (61.01-80.01%) of ammonical nitrogen, and (71.16-85.70%) of total organic carbon (TOC) in all four wastewaters. The fatty acid methyl ester (FAME) profile of T. indica shows the presence of myristic acid (1.2%) pentadecylic acid (0.28%), palmitic acid (10.32%), oleic acid (34.59%), linoleic acid (12.38%), and eicosanoic acid (14.88%) in STS. This study demonstrates that T. indica is the most suitable microalgal species among the four microalgal strains selected for phycoremediation of wastewaters and higher biomass production for sustainable biodiesel production.

Phycoremediation potential of marine microalga Tetraselmis indica on secondary treated domestic sewage for nutrient removal and biodiesel production.

Marine microalga Tetraselmis indica (T. indica) was cultivated in secondary treated domestic sewage (STDS) in batch mode. Optimization studies showed that after 14 days of cultivation period, highest biomass yield reached was 0.88 ± 0.04 g/L at the optimum temperature of 27 ± 1 °C and light intensity of 135 µmol m-2 s-1. T. indica removed about 60.93% phosphate, 78.46% nitrate, 72.94% chemical oxygen demand (COD), 73.17% biological oxygen demand (BOD), 98.90% total dissolved solids (TDS) and heavy metals (83.11% Cd, 55.67% Ca, 45.12% Cu, 13.67% Mn, 50.88% Pb, and 98.92% Al) from STDS. The level of electrical conductivity was reduced to 0.0974 ± 0.045 dS/m. The fatty acid methyl ester (FAME) profile showed the presence of palmitic acid (12.91%), oleic acid (35.94%), linoleic acid (14.89%) and eicosanoic acid (12.34%). This study indicates the potential of T. indica for removal of pollutants from STDS and also its capability of biodiesel production.