RESUMO
Imatinib, a small molecule kinase inhibitor, is used as a cancer growth blocker. However, one of its most serious side effects is congestive cardiac failure. Reducing drug toxicity may be achieved through the use of drug delivery systems. Biocompatible metal-organic framework (MOF) materials, namely FeMIL-100 and FeMIL-101-NH2, were employed as potential imatinib carriers. They efficiently delivered the drug as an anticancer agent while minimizing cardiotoxicity. Notably, the release of imatinib from FeMIL-100 was rapid in acidic conditions and slower in pH-neutral environments, allowing targeted delivery to cancer cells. The carrier's pH-dependent stability governed the drug release mechanism. Two release models-Korsmeyer-Peppas and Weibull-were fitted to the experimental data and discussed in terms of drug release from a rigid microporous matrix. Cytotoxicity tests were conducted on two cell lines: HL60 (a model cell line for acute myeloid leukemia) and H9c2 (a cell line for cardiomyocytes). Overall, the metal-organic framework (MOF) carriers mitigated imatinib's adverse effects without compromising its effectiveness.
Assuntos
Antineoplásicos , Portadores de Fármacos , Mesilato de Imatinib , Estruturas Metalorgânicas , Mesilato de Imatinib/farmacologia , Mesilato de Imatinib/química , Humanos , Estruturas Metalorgânicas/química , Antineoplásicos/farmacologia , Antineoplásicos/química , Portadores de Fármacos/química , Cardiotoxicidade/prevenção & controle , Liberação Controlada de Fármacos , Sobrevivência Celular/efeitos dos fármacos , Células HL-60 , Concentração de Íons de Hidrogênio , AnimaisRESUMO
Zeolites have been widely applied as versatile catalysts, sorbents, and ion exchangers with unique porous structures showing molecular sieving capability. In these years, it is reported that some layered zeolites can be delaminated into molecularly thin 2-dimensional (2D) nanosheets characterized by inherent porous structures and highly exposed active sites. In the present study, two types of zeolite nanosheets with distinct porous structures with MWW topology (denoted mww) and ferrierite-related structure (denoted bifer) are deposited on a substrate through the solution process via electrostatic self-assembly. Alternate deposition of zeolite nanosheets with polycation under optimized conditions allows the layer-by-layer growth of their multilayer films with a stacking distance of 2-3 nm. Furthermore, various hierarchical structures defined at the unit-cell dimensions can be constructed simply by conducting the deposition of mww and bifer nanosheets in a designed sequence. Adsorption of a dye, Rhodamine B, in these films, is examined to show that adsorption is dependent on constituent zeolite nanosheets and their assembled nanostructures. This work has provided fundamental advancements in the fabrication of artificial zeolite-related hierarchical structures, which may be extended to other zeolite nanosheets, broadening their functionalities, applications, and benefits.
RESUMO
Zeolites are highly efficient industrial catalysts and sorbents with microporous framework structures. Approximately 10% of the frameworks, but eventually all in the long run, have produced both 3D crystals and 2D layers. The latter can be intercalated and expanded like all 2D materials but proved difficult to exfoliate directly into suspensions of monolayers in solution as precursors for unique synthetic opportunities. Successful exfoliations have been reported recently and are overviewed in this perspective article. The discussion highlights 3 primary challenges in this field, namely finding suitable 2D zeolite preparations that exfoliate directly in high yield, proving uniform layer thickness in solution and identifying applications to exploit the unique synthetic capabilities and properties of exfoliated zeolite monolayers. Four zeolites have been confirmed to exfoliate directly into monolayers: 3 with known structures-MWW, MFI, and RWR and one unknown, bifer with a unit cell close to ferrierite. The exfoliation into monolayers is confirmed by the combination of 5-6 characterization techniques including AFM, in situ and in-plane XRD, and microscopies. The promising areas of development are oriented films and membranes, intimately mixed zeolite phases, and hierarchical nanoscale composites with other active species like nanoparticles and clusters that are unfeasible by solid state processes.
RESUMO
Ferrierites and their delaminated (ITQ-6) and silica intercalated (ITQ-36) forms, with the intended molar Si/Al ratios of zeolite layers of 30 and 50, were synthesized and tested as catalysts of methanol to dimethyl ether (DME) as well as ethanol to diethyl ether (DEE) and ethylene dehydration. It was shown that increased content of acid sites, especially of Brønsted type, resulted in more active catalysts of alcohol dehydration. Brønsted acid sites dominate in ferrierites and their delaminated forms (ITQ-6). Contribution of the Lewis type of acid sites increased in silica pillared ferrierites (ITQ-36) possibly by deposition of aluminium species on the surface of amorphous silica. Conversion of methanol to DME was not limited by internal diffusion of reactants in narrow pores of ferrierite. Such limitation was observed for synthesis of larger DEE molecules over ferrierites. The ITQ-6 catalysts with the opened interlayer structure presented better efficiency in ethanol to DEE conversion due to overcoming these diffusional restrictions. Moreover, selectivity to DEE over ITQ-6 was higher than in the presence of three-dimensional ferrierite.
RESUMO
Structural defects in metal-organic frameworks can be exploited to tune material properties. In the case of UiO-66 material, they may change its nature from hydrophobic to hydrophilic and therefore affect the mechanism of adsorption of polar and non-polar molecules. In this work, we focused on understanding this mechanism during adsorption of molecules with different dipole moments, using the standard volumetric adsorption measurements, IR spectroscopy, DFT + D calculations, and Monte Carlo calculations. Average occupation profiles showed that polar and nonpolar molecules change their preferences for adsorption sites. Hence, defects in the structure can be used to tune the adsorption properties of the MOF as well as to control the position of the adsorbates within the micropores of UiO-66.
RESUMO
Direct exfoliation of layered zeolites into solutions of monolayers has remained unresolved since the 1990s. Recently, zeolite MCM-56 with the MWW topology (layers denoted mww) has been exfoliated directly in high yield by soft-chemical treatment with tetrabutylammonium hydroxide (TBAOH). This has enabled preparation of zeolite-based hierarchical materials and intimate composites with other active species that are unimaginable via the conventional solid-state routes. The extension to other frameworks, which provides broader benefits, diversified activity, and functionality, is not routine and requires finding suitable synthesis formulations, viz. compositions and conditions, of the layered zeolites themselves. This article reports exfoliation and characterization of layers with ferrierite-related structure, denoted bifer, having rectangular lattice constants like those of the FER and CDO zeolites, and thickness of approximately 2 nm, which is twice that of the so-called fer layer. Several techniques were combined to prove the exfoliation, supported by simulations: AFM; in-plane, in situ, and powder X-ray diffraction; TEM; and SAED. The results confirmed (i) the structure and crystallinity of the layers without unequivocal differentiation between the FER and CDO topologies and (ii) uniform thickness in solution (monodispersity), ruling out significant multilayered particles and other impurities. The bifer layers are zeolitic with Brønsted acid sites, demonstrated catalytic activity in the alkylation of mesitylene with benzyl alcohol, and intralayer pores visible in TEM. The practical benefits are demonstrated by the preparation of unprecedented intimately mixed zeolite composites with the mww, with activity greater than the sum of the components despite high content of inert silica as pillars.
RESUMO
We investigated the properties and catalytic activity of zeolites with MWW topology obtained by unprecedented liquid exfoliation of the MCM-56 zeolite into solutions of monolayers and isolation/reassembly of the dispersed layers by various methods, with optional purification by dialysis or ammonium exchange. The layers were recovered by flocculation with alcohol or ammonium nitrate and freeze-drying. Flocculation alone, even with ammonium nitrate, did not ensure removal of residual sodium cations resulting in catalysts with low activity. Dialysis of the solutions with dispersed monolayers proved to be efficient in removing sodium cations and preserving microporosity. The monolayers were also isolated as solids by freeze-drying. The highest BET area and pore volume obtained with the freeze-dried sample confirmed lyophilization efficiency in preserving layer structure. The applied test reaction, Friedel-Crafts alkylation of mesitylene, showed high benzyl alcohol conversion due to increased concentration of accessible acid centers caused by the presence of secondary mesoporosity. The applied treatments did not change the acid strength of the external acid sites, which are the most important ones for converting bulky organic molecules. Zeolite acidity was not degraded in the course of exfoliation into monolayers, showing the potential of such colloid dispersions for the formation of active catalysts.
RESUMO
The present studies were conducted to show the potential of 2D zeolites as effective and non-toxic carriers of drugs. Layered zeolites exhibit adjustable interlayer porosity which can be exploited for controlled drug delivery allowing detailed investigation of the drug release because the structure of the carrier is known exactly. This study was conducted with model drugs ciprofloxacin and piracetam, and ZSM-55 with ca 1 nm thick layers, in detemplated and pillared forms. The release profiles differed from the commercial, crystalline forms of drugs-the release rate increased for ciprofloxacin and decreased for piracetam. To understand the dissolution mechanisms the release data were fitted to Korsmeyer-Peppas equation, showing Fickian (for pillared) and anomalous (for detemplated sample) transport. FT-IR studies showed that strong interaction carrier-drug may be responsible for the modified, slowed down release of piracetam while better solubility and faster release of ciprofloxacin was attributed to formation of the protonated form resulting in weaker interaction with the zeolite than in the pure crystalline form. Two independent tests on L929 mice fibroblasts (ToxiLight and PrestoBlue) showed that ZSM-55, in moderate concentrations may be safely used as a carrier of drug molecules, not having negative effect on the cells viability or proliferation rate.
Assuntos
Ciprofloxacina/química , Portadores de Fármacos/química , Zeolitas/química , Animais , Linhagem Celular , Sobrevivência Celular/efeitos dos fármacos , Ciprofloxacina/metabolismo , Portadores de Fármacos/farmacologia , Liberação Controlada de Fármacos , Camundongos , Piracetam/química , Piracetam/metabolismo , Zeolitas/farmacologiaRESUMO
The most effective approach to practical exploitation of the layered solids that often have unique valuable properties-such as graphene, clays, and other compounds-is by dispersion into colloidal suspensions of monolayers, called liquid exfoliation. This fundamentally expected behavior can be used to deposit monolayers on supports or to reassemble into hierarchical materials to produce, by design, catalysts, nanodevices, films, drug delivery systems, and other products. Zeolites have been known as extraordinary catalysts and sorbents with three-dimensional structures but emerged as an unexpected new class of layered solids contributing previously unknown valuable features: catalytically active layers with pores inside or across. The self-evident question of layered zeolite exfoliation has remained unresolved for three decades. Here, we report the first direct exfoliation of zeolites into suspension of monolayers as proof of the concept, which enables diverse applications including membranes and hierarchical catalysts with improved access.
RESUMO
The theranostic approach to local tuberculosis treatment allows drug delivery and imaging of the lungs for a better control and personalization of antibiotic therapy. Metal-organic framework (MOF) Fe-MIL-101-NH2 nanoparticles were loaded with isoniazid. To optimize their functionality a 23 factorial design of spray-drying with poly(lactide-co-glycolide) and leucine was employed. Powder aerodynamic properties were assessed using a twin stage impinger based on the dose emitted and the fine particle fraction. Magnetic resonance imaging (MRI) contrast capabilities were tested on porous lung tissue phantom and ex vivo rat lungs. Cell viability and uptake studies were conducted on murine macrophages RAW 246.9. The final product showed good aerodynamic properties, modified drug release, easier uptake by macrophages in relation to raw isoniazid-MOF, and MRI contrast capabilities. Starting from raw MOF, a fully functional inhalable theranostic system with a potential application in personalized tuberculosis pulmonary therapy was developed.
RESUMO
Various temperature-programmed techniques were used as tools in mechanistic studies of selective catalytic reduction (SCR) of NO with ammonia in the presence of Fe-containing BEA zeolites. Moreover, FTIR studies of adsorbed NH3 and NO were conducted to determine the interactions of reactants with the catalyst surface. Iron was introduced into BEA zeolite by three different methods: i)â two-step post-synthesis; ii)â conventional wet impregnation; iii)â ion exchange. The catalytic activity was dependent on the method used for iron introduction. The reactivities of NH3 and NO adsorbed on iron-modified zeolites obtained by impregnation and ion-exchange methods were higher than those measured for the catalyst obtained by a two-step post-synthesis method. The activity of Fe-containing zeolites in SCR was related to the form of deposited iron species, as well as to the nature, strength, and concentration of acid sites. Possible reaction pathways of NO reduction over the FeBEA zeolite catalysts were presented and discussed.
RESUMO
PURPOSE: The purpose of the study was initial evaluation of applicability of metal organic framework (MOF) Fe-MIL-101-NH2 as a theranostic carrier of antituberculous drug in terms of its functionality, i.e. drug loading, drug dissolution, magnetic resonance imaging (MRI) contrast and cytotoxic safety. METHODS: Fe-MIL-101-NH2 was characterized using X-ray powder diffraction, FTIR spectrometry and scanning electron microscopy. The particle size analysis was determined using laser diffraction. Magnetic resonance relaxometry and MRI were carried out on phantoms of the MOF system suspended in polymer solution. Drug dissolution studies were conducted using Franz cells. For MOF cytotoxicity, commercially available fibroblasts L929 were cultured in Eagle's Minimum Essential Medium supplemented with 10% fetal bovine serum. RESULTS: MOF particles were loaded with 12% of isoniazid. The particle size (3.37-6.45 µm) depended on the micronization method used. The proposed drug delivery system can also serve as the MRI contrast agent. The drug dissolution showed extended release of isoniazid. MOF particles accumulated in the L929 fibroblast cytoplasmic area, suggesting MOF release the drug inside the cells. The cytotoxicity confirmed safety of MOF system. CONCLUSIONS: The application of MOF for extended release inhalable system proposes the novel strategy for delivery of standard antimycobacterial agents combined with monitoring of their distribution within the lung tissue.
Assuntos
Antituberculosos/química , Portadores de Fármacos/química , Ferro/química , Nanomedicina Teranóstica/métodos , Tuberculose , Animais , Antituberculosos/administração & dosagem , Antituberculosos/metabolismo , Linhagem Celular , Relação Dose-Resposta a Droga , Portadores de Fármacos/administração & dosagem , Portadores de Fármacos/metabolismo , Fibroblastos/efeitos dos fármacos , Fibroblastos/metabolismo , Ferro/administração & dosagem , Ferro/metabolismo , Espectroscopia de Ressonância Magnética/métodos , Tuberculose/tratamento farmacológico , Tuberculose/metabolismoRESUMO
Layered zeolite materials with FER layer topology can produce various condensed and expanded structures including zeolite frameworks, FER and CDO, their interlayer expanded forms (IEZ), and organic-intercalated and pillared derivatives. This work concerns pillaring of the surfactant-swollen derivative with a gallery height of ca. 2.5 nm between layers by treatment with tetraethylorthosilicate (TEOS) at room and elevated temperatures. The materials obtained at 100 °C and higher showed unusual properties including 2 nm pores on the micro/mesoporous border and disordered layer packing indicated by the absence of distinct low angle interlayer peaks at d-spacing >3 nm (â¼3° 2θ Cu Kα radiation) in the X-ray diffraction pattern (XRD). TEOS treatment at room temperature produced a pillared molecular sieve with the expected mesoporous characteristics, namely a pore size of around 3 nm and a high intensity low angle (001) peak at 2.3° 2θ, and a d-spacing of 3.8 nm, in the XRD. The characterization aiming to elucidate the nature of the obtained unusual products included gas adsorption isotherms, aberration corrected (Cs-corrected) Scanning Transmission Electron Microscopy (STEM) studies and 29Si solid state NMR. BET surface area values decreased with the temperature of TEOS treatment from approximately 1200 m2 g-1 to â¼900 and 600 m2 g-1, at room temperature, 100 °C, and 120 °C, respectively. The 29Si solid state NMR revealed the presence of both Q3 ((SiO)3SiOX, X = H or minus charge) and Q4 ((SiO)4Si) centers giving separated signals up to the pillaring step. After pillaring at 100 °C and calcination, the nominal intensity ratios Q4 : Q3 were 2.17 and 2.61 but the signals were merged into one broad peak indicating the structural heterogeneity of Si-O coordination. The microscopy showed the presence of FER layers in the samples but the overall structure and composition were not well-defined. The observed unusual disorganization and possible partial degradation of layers during pillaring may result from the combination of high temperature, alkalinity (surfactant hydroxide) and siliceous composition of the layers. The obtained pillared products are of interest for the preparation of larger pore catalysts and sorbents or controlled drug delivery.
RESUMO
Two-step preparation of iron and cobalt-containing MCM-56 zeolites has been undertaken to evaluate the influence of their physicochemical properties in the selective catalytic reduction (NH3-SCR or DeNOx) of NO using NH3 as a reductant. Zeolites were prepared by the selective leaching of the framework cations by concentrated HNO3 solution and NH4F/HF mixture and consecutively, introduction of Co and Fe heteroatoms, in quantities below 1wt%. Further calcination allowed to obtain highly dispersed active species. Their evaluation and speciation was realized by adsorption of pyridine and NO, followed by FTIR spectroscopy. Both Fe-MCM-56 zeolites showed excellent activities (maximum NO conversion 92%) with high selectivity to dinitrogen (above 99%) in the high temperature NH3-SCR process. High catalytic activity of Fe-MCM-56 zeolites was assigned to the formation of stable nitrates, delivering NO to react with NH3 at higher temperatures and suppressing the direct NO oxidation. It was found that more nitrates was formed in Fe-MCM-56 (HNO3) than in Fe-MCM-56 (HF/NH4F) and that could compensate for the lower Fe loading, resulting in very similar catalytic activity of both catalysts. At the same time both Co-and Fe-MCM-56 zeolites were moderately active in direct N2O decomposition, with maximum N2O conversion not higher than 80% and activity window starting at 500°C. This phenomenon was expected since both types of catalysts contained well dispersed active centers, not beneficial for this reaction.
RESUMO
The growing resistance of pathogens to conventional antibiotics has become a public health problem and raises the need to seek new effective solutions. Metal-organic frameworks (MOFs) are porous, hybrid materials comprising metal ions linked by organic binding ligands. The possibility of using a variety of chemical building components in MOFs enables the formation of structures with desired properties. They can act as a reservoir of metal ions, providing their gradual release and resulting in a sustained antibacterial action analogous to that proposed for metal/metal oxide nanoparticles (NPs) but different to that of antibiotics. These features make MOFs promising candidates for pharmaceutical and biomedical applications, as illustrated by examples discussed in this review.
Assuntos
Antibacterianos/administração & dosagem , Portadores de Fármacos/administração & dosagem , Estruturas Metalorgânicas/administração & dosagem , Animais , Antibacterianos/farmacologia , Portadores de Fármacos/farmacologia , Humanos , Estruturas Metalorgânicas/farmacologiaRESUMO
Many chemical compositions produce layered solids consisting of extended sheets with thickness not greater than a few nanometers. The layers are weakly bonded together in a crystal and can be modified into various nanoarchitectures including porous hierarchical structures. Several classes of 2-dimensional (2D) materials have been extensively studied and developed because of their potential usefulness as catalysts and sorbents. They are discussed in this review with focus on clays, layered transition metal oxides, silicates, layered double hydroxides, metal(iv) phosphates and phosphonates, especially zirconium, and zeolites. Pillaring and delamination are the primary methods for structural modification and pore tailoring. The reported approaches are described and compared for the different classes of materials. The methods of characterization include identification by X-ray diffraction and microscopy, pore size analysis and activity assessment by IR spectroscopy and catalytic testing. The discovery of layered zeolites was a fundamental breakthrough that created unprecedented opportunities because of (i) inherent strong acid sites that make them very active catalytically, (ii) porosity through the layers and (iii) bridging of 2D and 3D structures. Approximately 16 different types of layered zeolite structures and modifications have been identified as distinct forms. It is also expected that many among the over 200 recognized zeolite frameworks can produce layered precursors. Additional advances enabled by 2D zeolites include synthesis of layered materials by design, hierarchical structures obtained by direct synthesis and top-down preparation of layered materials from 3D frameworks.
RESUMO
By combining experimental adsorption isotherms, microcalorimetric data, infrared spectroscopy and quantum chemical calculations the adsorption behaviour of the CPO-27/MOF-74 series (Ni, Co, Mg, Cu, and Zn) in the desulfurization of fuels is evaluated. The results show a clear influence of the metal ion on the adsorption capacity and affinity for S-heterocyclic compounds, with CPO-27(Ni) being the best performing material both in terms of capacity and affinity. The microcalorimetric data and infrared spectroscopy confirm the high affinity of CPO-27(Ni) for thiophene and similar compounds, while the computational data reveal that the origin of this outstanding adsorption performance is the strong sulfur-metal interaction.
RESUMO
The pore characteristics of zeolite samples including two kinds of ZSM-5 crystals as a base case and the unique mono-layered MCM-56 in different structural forms have been studied by the new method QE-TPDA (quasi-equilibrated temperature-programmed desorption and adsorption) in comparison with the standard nitrogen adsorption. Both approaches produce consistent results in terms of micro- and meso-porous features as well as quantitative pore volume values. The benefits of QE-TPDA include fast data acquisition (hours) and small sample size (milligrams). It is very flexible in using various hydrocarbons as probe molecules, which may reveal additional details associated with pores, their internal environment and dimensions/shape of the sorbate molecules. Hence, QE-TPDA is a valuable complementary tool for porosity characterization of the ever increasing diversity of porous materials and their pore structures. This was demonstrated by the results for the desorption of nonane and 2,2-dimethyloctane (DMO). The latter showed an additional maximum in the intermediate temperature range (between 'micro-' and 'mesopore' regions) which could be attributed to adsorption in the subsurface micropores (i.e. the pore mouths) where DMO could be partially adsorbed with t-butyl groups remaining on the outside. This was also reflected in the discrepancy between apparent volumes of micro- and mesopores calculated from the nonane and DMO experiments. Pillared MCM-56 revealed visibly enhanced subsurface micropore adsorption compared to the parent (mono-layer MWW) and MCM-22 (multi-layered MWW) consistent with the expected increase in the content of external 12 ring surface cups.